Fault detection of wind turbine drivetrain utilizing power-speed characteristics

Wind energy, being the fastest growing renewable energy source in the present world, requires a large number of wind turbines to transform wind energy into electricity. One factor driving the cost of this energy is the reliable operation of these turbines. Therefore, it is a growing requirement within the wind farm community, to monitor the operation of the wind turbines on a continuous basis so that a possible fault can be detected ahead of time. As the wind turbine operates in an environment of constantly changing wind speed, it is a challenging task to design a fault detection technique which can accommodate the stochastic operational behavior of the turbines. Addressing this issue, this paper proposes a novel fault detection criterion which is robust against operational uncertainty, as well as having the ability to quantify severity level specifically of the drivetrain abnormality within an operating wind turbine. A benchmark model of wind turbine has been utilized to simulate drivetrain fault condition and effectiveness of the proposed technique has been tested accordingly. From the simulation result it can be concluded that the proposed criterion exhibits consistent performance for drivetrain faults for varying wind speed and has linear relationship with the fault severity level.

Remaining useful life prediction of rotating equipment using covariate-based hazard models : industry applications

The ability to estimate the expected Remaining Useful Life (RUL) is critical to reduce maintenance costs, operational downtime and safety hazards. In most industries, reliability analysis is based on the Reliability Centred Maintenance (RCM) and lifetime distribution models. In these models, the lifetime of an asset is estimated using failure time data; however, statistically sufficient failure time data are often difficult to attain in practice due to the fixed time-based replacement and the small population of identical assets. When condition indicator data are available in addition to failure time data, one of the alternate approaches to the traditional reliability models is the Condition-Based Maintenance (CBM). The covariate-based hazard modelling is one of CBM approaches. There are a number of covariate-based hazard models; however, little study has been conducted to evaluate the performance of these models in asset life prediction using various condition indicators and data availability. This paper reviews two covariate-based hazard models, Proportional Hazard Model (PHM) and Proportional Covariate Model (PCM). To assess these models’ performance, the expected RUL is compared to the actual RUL. Outcomes demonstrate that both models achieve convincingly good results in RUL prediction; however, PCM has smaller absolute prediction error. In addition, PHM shows over-smoothing tendency compared to PCM in sudden changes of condition data. Moreover, the case studies show PCM is not being biased in the case of small sample size.

How the energy sector could get it wrong with cloud computing

Cloud computing has significantly impacted a broad range of industries, but these technologies and services have been absorbed throughout the marketplace unevenly. Some industries have moved aggressively towards cloud computing, while others have moved much more slowly. For the most part, the energy sector has approached cloud computing in a measured and cautious way, with progress often in the form of private cloud solutions rather than public ones, or hybridized information technology systems that combine cloud and existing non-cloud architectures. By moving towards cloud computing in a very slow and tentative way, however, the energy industry may prevent itself from reaping the full benefit that a more complete migration to the public cloud has brought about in several other industries. This short communication is accordingly intended to offer a high-level overview of cloud computing, and to put forward the argument that the energy sector should make a more complete migration to the public cloud in order to unlock the major system-wide efficiencies that cloud computing can provide. Also, assets within the energy sector should be designed with as much modularity and flexibility as possible so that they are not locked out of cloud-friendly options in the future.

Effects of layer orientation of CFRP strengthened steel hollow members

This paper reveals the effects of layer orientation on structural behaviour of three layers configured (LHL, HHL, LLH) CFRP strengthened circular hollow section (CHS) members subjected to bending. The beams were loaded to failure under four-point bending. The structural behaviour of the CFRP strengthened tubular steel beams with various layer orientations were presented in terms of failure load, stiffness, composite beam action and modes of failure. The LHL and LLH layers oriented strengthened beams perform slightly better than HHL layers oriented strengthened beams. The LHL and LLH layers oriented treated beams showed very similar structural behaviour.

The National Stroke Nursing Council: A nursing call for action

Nursing is fundamental to the care of stroke patients. From the acute setting all the way to rehabilitation and community reintegration, nursing is there. Having well-educated and highly skilled nurses to monitor and care for stroke patients is crucial. Equally important is the collaboration of colleagues at a national level to facilitate and disseminate research and best practice guidelines across Canada. The National Stroke Nursing Council aims to fill this role. Stroke nurses from across Canada were invited to a national forum in 2005, hosted by the Canadian Stroke Network. The focus of this forum was to elucidate issues of concern to nurses across the stroke care continuum in relation to a Canadian Stroke Strategy. Subsequent to this forum, a cadre of nurses, after undergoing a rigorous screening process, were selected to form the inaugural National Stroke Nursing Council (NSNC). With ongoing support from the Canadian Stroke Network, the mandate of the NSNC is to promote leadership, communication, advocacy, education and nursing research in the field of stroke.

The Value of Financial Planning Advice: Process and Outcome Effects on Consumer Well-being [Time 1 and 2 Survey Summary Results]

While anecdotal evidence indicates financial advice affects consumers’ financial well-being, this research project is motivated by the absence of empirically-grounded research relating to the extent to which, and, importantly, how, financial planning advice contributes to broader client well-being. Accordingly, the aim of this project is to establish how the quality of financial planning advice can be optimised to add value, not only to clients’ financial situation, but also to broader aspects of their well-being. This broader construct of well-being captures a range of process and outcome factors that map to concepts of security, control, choice, mastery, and life satisfaction (Irving, 2012; Gallery, Gallery, Irving & Newton, 2011; Irving, Gallery, and Gallery, 2009). Financial planning is commonly purported to confer not only tangible benefits, but also intangible benefits, such as increased security and peace of mind that are considered as important, if not more important, than material outcomes. Such claims are intuitively appealing; however, little empirical evidence exists for the notion that engaging with a financial planner or adviser promotes peace of mind, feelings of security, and expands choices and possibilities. Nor is there evidence signalling what mechanisms might underpin such client benefits. In addressing this issue, we examine the financial planning advice (including financial product advice) provided to retail clients, and consider the short- and longer-term impacts on clients’ financial satisfaction and broader well-being. To this end, we examine both process (e.g., how financial planning advice is given) and outcome (e.g., financial situation) effects.

Investigating the concept of potential quality: An exploratory study in the real estate industry

Purpose The purpose of this research is to examine the concept of “potential quality” – that is, a company's tangible search qualities (such as the physical servicescape and virtual servicescape) – within the context of the real‐estate industry in the USA. Design/methodology/approach This qualitative study collects data by conducting personal in‐depth interviews with 34 respondents who had been recent buyers or renters of property. The data are then coded and themed to identify quality dimensions relevant to this industry. Findings The results indicate that a buyer's perception of the overall service quality of real‐estate service consists of two components: the interaction with a realtor (process quality); and the virtual servicescape, especially the firm's website design and content (potential quality). The study concludes that existing scales (such as SERVQUAL and RESERV) fail to capture the tangible component of service quality sufficiently in the real‐estate industry. Research limitations/implications The study uses data from only one industry (real estate) and from only one demographic segment (professionals in higher education). Practical implications Service providers of intangible, high‐contact services must appreciate the importance of the virtual servicescape as a surrogate quality indicator that can help to reduce information asymmetries and consumers' uncertainty with regard to initiating a business relationship. Real estate firms need to pay attention to the training of agents and the design and content of their e‐service systems. Originality/value This study integrates potential quality, process quality, and outcome quality in a comprehensive proposed model. In particular, the study identifies “potential quality” as a combination of the attributes of the virtual service environment and the physical service environment.

Intuitive use of tangible toys

Interfaces for children have continued to evolve in terms of complexity, with toys ranging from traditional tangible interfaces to apps with digital interfaces and hybrid toys with mixed physical and digital interfaces. However, there is limited research done to investigate their potential for intuitive use. This research study compares a tangible toy and an equivalent toy in the digital world (app) for intuitive use. Non-parametric Mann-Whitney U test results showed that the tangible toy was more intuitive than the intangible counter part. Tangible systems are less complex to use and they require less time to encode and retrieve associated knowledge to use them intuitively. They are associated with low domain transfer distance and easily discoverable features. Intangible interfaces, on the other ha nd, require greater complexity and time to encode and retrieve associated experiential knowledge. Intangibles are associated with larger domain transfer distance and undiscoverable features which affects their intuitive use. Design implications and future work are discussed, emphasising the need for investigating aspects that make tangible systems intuitive to use.

Who pays for standardised testing? A cost-benefit study of mandated testing in three Queensland secondary schools

This paper reports on an Australian study that explored the costs and benefits of the National Assessment Programme, Literacy and Numeracy (NAPLAN) testing, both tangible and intangible, of Year 9 students in three Queensland schools. The study commenced with a review of pertinent studies and other related material about standardised testing in Australia, the USA and UK. Information about NAPLAN testing and reporting, and the pedagogical impacts of standardised testing were identified, however little about administrative costs to schools was found. A social constructivist perspective and a multiple case study approach were used to explore the actions of school managers and teachers in three Brisbane secondary schools. The study found that the costs of NAPLAN testing to schools fell into two categories: preparation of students for the testing; and administration of the tests. Whilst many of the costs could not be quantified, they were substantial and varied according to the education sector in which the school operated. The benefits to schools of NAPLAN testing were found to be limited. The findings have implications for governments, curriculum authorities and schools, leading to the conclusion that, from a school perspective, the benefits of NAPLAN testing do not justify the costs.

Blame it on Rio: Biodiscovery, native title, and traditional knowledge

This article examines the legal responses to protect traditional knowledge of biodiversity in the wake of the Rio Convention on Biological Diversity. It considers the relative merits of the inter-locking regimes of contract law, environmental law, intellectual property law, and native title law. Part 1 considers the natural drug discovery industry in Australia. In particular, it looks at the operations of Amrad, Astra Zeneca R & D, and the Australian Institute of Marine Science. This section examines the key features of the draft regulations proposed under the Environment Protection and Biodiversity Conservation Act 1999 (Cth) - model contracts, informed consent, benefit-sharing, and ministerial discretion. The use of Indigenous Land Use Agreements in the context of access to genetic resources is also explored. Part 2 considers the role played by native title law in dealing with tangible and intangible property interests. The High Court decision in Western Australia v Ward considers the relationship between native title rights and cultural knowledge. The Federal Court case of Neowarra v Western Australia provides an intriguing gloss on this High Court decision. Part 3 looks at whether traditional knowledge of biodiversity can be protected under intellectual property law. It focuses upon reforms such as Senator Aden Ridgeway's proposed amendments to the Plant Breeder's Rights Act 1994 (Cth), and the push to make disclosure of origin a requirement of patent law.

Precious images: Copyright law and television broadcasts

Over the last several years, Australian media magnate Kerry Packer has sought to maximise the value of the intellectual property assets of the television station Channel Nine. He has made a concerted effort to expand the scope of copyright protection over television broadcasts screened. The television station Channel Nine has taken a number of legal actions against its rivals and competitors - including the Australian Broadcasting Corporation and Network Ten. It has alleged that the broadcasters have used substantial parts of copyrighted television broadcasts without their permission.

Inter-organisational characteristics of resilience in a post-disaster recovery context

During post-disaster recovery, an infrastructure system may be subject to a number of disturbances originating from several other interdependent infrastructures. These disturbances might result in a series of system failures, thereby having immediate impact on societal living conditions. The inability to detect signs of disturbance from one infrastructure during recovery might cause significant disruptive effects on other infrastructure via the interconnection that exist among them. In such circumstances, it clearly appears that critical infrastructures' interdependencies affect the recovery of each individual infrastructure, as well as those of other interdependent infrastructure systems. This is why infrastructure resilience needs to be improved in function of those interdependencies, particularly during the recovery period to avoid the occurrence of a ‘disaster of disaster’ scenario. Viewed from this perspective, resilience is achieved through an inter-organisational collaboration between the different organisations involved in the reconstruction of interdependent infrastructure systems. This paper suggests that to some extent, the existing degree of interconnectedness between these infrastructure systems can also be found in their resilience ability during post-disaster recovery. For instance, without a resilient energy system, a large-scale power outage could affect simultaneously all the interdependent infrastructures after a disaster. Thus, breaking down the silos of resilience would be the first step in minimizing the risks of disaster failures from one infrastructure to cascade or escalate to other interconnected systems.

A decision support framework for prioritization of engineering asset management activities under uncertainty

Engineers and asset managers must often make decisions on how to best allocate limited resources amongst different interrelated activities, including repair, renewal, inspection, and procurement of new assets. The presence of project interdependencies and the lack of sufficient information on the true value of an activity often produce complex problems and leave the decision maker guessing about the quality and robustness of their decision. In this paper, a decision support framework for uncertain interrelated activities is presented. The framework employs a methodology for multi-criteria ranking in the presence of uncertainty, detailing the effect that uncertain valuations may have on the priority of a particular activity. The framework employs employing semi-quantitative risk measures that can be tailored to an organisation and enable a transparent and simple-to-use uncertainty specification by the decision maker. The framework is then demonstrated on a real world project set from a major Australian utility provider.

University students' intentions to report cyberbullying

Little is known about the prevalence of cyberbullying among university students and less about whether they utilise anti-bullying policies. However, failure to report cyberbullying incidents to authorities would lessen the efficacy of these policies. This study investigated the prevalence of cyberbullying among university students and their reporting intentions for cyberbullying incidents. Two hundred and eighty- two students completed a survey on their intentions to report cyberbullying. Results found cyberbullying exists among university students and they would report to authorities if the policy outlined specific information. Students who had been cyber victimised were more likely to report than those students who had not been cyberbullied. Implications for universities are discussed.

Integration of Geospatial and Built Environment - National Data Policy

Digital technology offers enormous benefits (economic, quality of design and efficiency in use) if adopted to implement integrated ways of representing the physical world in a digital form. When applied across the full extent of the built and natural world, it is referred to as the Digital Built Environment (DBE) and encompasses a wide range of approaches and technology initiatives, all aimed at the same end goal: the development of a virtual world that sufficiently mirrors the real world to form the basis for the smart cities of the present and future, enable efficient infrastructure design and programmed maintenance, and create a new foundation for economic growth and social well-being through evidence-based analysis. The creation of a National Data Policy for the DBE will facilitate the creation of additional high technology industries in Australia; provide Governments, industries and citizens with greater knowledge of the environments they occupy and plan; and offer citizen-driven innovations for the future. Australia has slipped behind other nations in the adoption and execution of Building Information Modelling (BIM) and the principal concern is that the gap is widening. Data driven innovation added $67 billion to the Australian economy in 20131. Strong open data policy equates to $16 billion in new value2. Australian Government initiatives such as the Digital Earth inspired “National Map” offer a platform and pathway to embrace the concept of a “BIM Globe”, while also leveraging unprecedented growth in open source / open data collaboration. Australia must address the challenges by learning from international experiences—most notably the UK and NZ—and mandate the use of BIM across Government, extending the Framework for Spatial Data Foundation to include the Built Environment as a theme and engaging collaboration through a “BIM globe” metaphor. This proposed DBE strategy will modernise the Australian urban planning and the construction industry. It will change the way we develop our cities by fundamentally altering the dynamics and behaviours of the supply chains and unlocking new and more efficient ways of collaborating at all stages of the project life-cycle. There are currently two major modelling approaches that contribute to the challenge of delivering the DBE. Though these collectively encompass many (often competing) approaches or proprietary software systems, all can be categorised as either: a spatial modelling approach, where the focus is generally on representing the elements that make up the world within their geographic context; and a construction modelling approach, where the focus is on models that support the life cycle management of the built environment. These two approaches have tended to evolve independently, addressing two broad industry sectors: the one concerned with understanding and managing global and regional aspects of the world that we inhabit, including disciplines concerned with climate, earth sciences, land ownership, urban and regional planning and infrastructure management; the other is concerned with planning, design, construction and operation of built facilities and includes architectural and engineering design, product manufacturing, construction, facility management and related disciplines (a process/technology commonly known as Building Information Modelling, BIM). The spatial industries have a strong voice in the development of public policy in Australia, while the construction sector, which in 2014 accounted for around 8.5% of Australia’s GDP3, has no single voice and because of its diversity, is struggling to adapt to and take advantage of the opportunity presented by these digital technologies. The experience in the UK over the past few years has demonstrated that government leadership is very effective in stimulating industry adoption of digital technologies by, on the one hand, mandating the use of BIM on public procurement projects while at the same time, providing comparatively modest funding to address the common issues that confront the industry in adopting that way of working across the supply chain. The reported result has been savings of £840m in construction costs in 2013/14 according to UK Cabinet Office figures4. There is worldwide recognition of the value of bringing these two modelling technologies together. Australia has the expertise to exercise leadership in this work, but it requires a commitment by government to recognise the importance of BIM as a companion methodology to the spatial technologies so that these two disciplinary domains can cooperate in the development of data policies and information exchange standards to smooth out common workflows. buildingSMART Australasia, SIBA and their academic partners have initiated this dialogue in Australia and wish to work collaboratively, with government support and leadership, to explore the opportunities open to us as we develop an Australasian Digital Built Environment. As part of that programme, we must develop and implement a strategy to accelerate the adoption of BIM processes across the Australian construction sector while at the same time, developing an integrated approach in concert with the spatial sector that will position Australia at the forefront of international best practice in this area. Australia and New Zealand cannot afford to be on the back foot as we face the challenges of rapid urbanisation and change in the global environment. Although we can identify some exemplary initiatives in this area, particularly in New Zealand in response to the need for more resilient urban development in the face of earthquake threats, there is still much that needs to be done. We are well situated in the Asian region to take a lead in this challenge, but we are at imminent risk of losing the initiative if we do not take action now. Strategic collaboration between Governments, Industry and Academia will create new jobs and wealth, with the potential, for example, to save around 20% on the delivery costs of new built assets, based on recent UK estimates.