Are we there yet? Australian road safety targets and road traffic crash fatalities

Background Road safety targets are widely used and provide a basis for evaluating progress in road safety outcomes against a quantified goal. In Australia, a reduction in fatalities from road traffic crashes (RTCs) is a public policy objective: a national target of no more than 5.6 fatalities per 100,000 population by 2010 was set in 2001. The purpose of this paper is to examine the progress Australia and its states and territories have made in reducing RTC fatalities, and to estimate when the 2010 target may be reached by the jurisdictions. Methods Following a descriptive analysis, univariate time-series models estimate past trends in fatality rates over recent decades. Data for differing time periods are analysed and different trend specifications estimated. Preferred models were selected on the basis of statistical criteria and the period covered by the data. The results of preferred regressions are used to determine out-of-sample forecasts of when the national target may be attained by the jurisdictions. Though there are limitations with the time series approach used, inadequate data precluded the estimation of a full causal/structural model. Results Statistically significant reductions in fatality rates since 1971 were found for all jurisdictions with the national rate decreasing on average, 3% per year since 1992. However the gains have varied across time and space, with percent changes in fatality rates ranging from an 8% increase in New South Wales 1972-1981 to a 46% decrease in Queensland 1982-1991. Based on an estimate of past trends, it is possible that the target set for 2010 may not be reached nationally, until 2016. Unsurprisingly, the analysis indicated a range of outcomes for the respective state/territory jurisdictions though these results should be interpreted with caution due to different assumptions and length of data. Conclusions Results indicate that while Australia has been successful over recent decades in reducing RTC mortality, an important gap between aspirations and achievements remains. Moreover, unless there are fairly radical ("trend-breaking") changes in the factors that affect the incidence of RTC fatalities, deaths from RTCs are likely to remain above the national target in some areas of Australia, for years to come.

Young drivers' perceptions of road safety messages and a high performance vehicle advertisement : a qualitative exploration

While road safety messages that focus on physical threats have shown some effectiveness, messages that include social threats and gains/rewards may be an alternative approach to encourage safer driving behaviours. In addition to message frame and type, motor vehicle advertising exposure may also influence the persuasiveness of road safety messages. Using qualitative methods this preliminary study explored young drivers’ (N = 17, 11 males) perceptions of the persuasiveness of four anti-speeding messages and a fictional high performance vehicle advertisement. The majority of males perceived the social loss/gain-framed messages to be more persuasive (sense of responsibility and personal relevance themes), whereas females tended to perceive the physical loss/ gain-frame messages (social esteem theme) to be more persuasive. Males appeared to be, while females appeared not to be, persuaded by the vehicle advertisement. The findings suggest that a range of road safety messages may be required to reach and influence young drivers.

Capacity determination and expansion models for rail networks

This thesis focused upon the development of improved capacity analysis and capacity planning techniques for railways. A number of innovations were made and were tested on a case study of a real national railway. These techniques can reduce the time required to perform decision making activities that planners and managers need to perform. As all railways need to be expanded to meet increasing demands, the presumption that analytical capacity models can be used to identify how best to improve an existing network at least cost, was fully investigated. Track duplication was the mechanism used to expanding a network's capacity, and two variant capacity expansion models were formulated. Another outcome of this thesis is the development and validation of bi objective models for capacity analysis. These models regulate the competition for track access and perform a trade-off analysis. An opportunity to develop more general mulch-objective approaches was identified.

Cultural safety, diversity and the servicer user and carer movement in mental health research

This study will be of interest to anyone concerned with a critical appraisal of mental health service users’ and carers’ participation in research collaboration and with the potential of the postcolonial paradigm of cultural safety to contribute to the service user research (SUR) movement. The history and nature of the mental health field and its relationship to colonial processes provokes a consideration of whether cultural safety could focus attention on diversity, power imbalance, cultural dominance and structural inequality, identified as barriers and tensions in SUR. We consider these issues in the context of state-driven approaches towards SUR in planning and evaluation and the concurrent rise of the SUR movement in the UK and Australia, societies with an intimate involvement in processes of colonisation. We consider the principles and motivations underlying cultural safety and SUR in the context of the policy agenda informing SUR. We conclude that while both cultural safety and SUR are underpinned by social constructionism constituting similarities in principles and intent, cultural safety has additional dimensions. Hence, we call on researchers to use the explicitly political and self-reflective process of cultural safety to think about and address issues of diversity, power and social justice in research collaboration.

Developing and evaluating approaches for utilising injury data to support product safety initiatives

With increasing concern about consumer product-related injuries in Australia, product safety regulators need evidence-based research to understand risks and patterns to inform their decision making. This study analysed paediatric injury data to identify and quantify product-related injuries in children to inform product safety prioritisation. This study provides information on novel techniques for interrogating health data to identify trends and patterns in product-related injuries to inform strategic directions in this growing area of concern.

Towards making informed decisions on selecting promising work zone safety treatments

Lack of detailed and accurate safety records on incidents in Australian work zones prevents a thorough understanding of the relevant risks and hazards. Consequently it is difficult to select appropriate treatments for improving the safety of roadworkers and motorists alike. This paper outlines development of a conceptual framework for making informed decisions about safety treatments by: 1) identifying safety issues and hazards in work zones; 2) understanding the attitudes and perceptions of both roadworkers and motorists; 3) reviewing the effectiveness of work zone safety treatments according to existing research, and; 4) incorporating local expert opinion on the feasibility and usefulness of the safety treatments. Using data collected through semi-structured interviews with roadwork personnel and online surveys of Queensland drivers, critical safety issues were identified. The effectiveness of treatments for addressing the issues was understood through rigorous literature review and consultations with local road authorities. Promising work zone safety treatments include enforcement, portable rumble strips, perceptual measures to imply reduced lane width, automated or remotely-operated traffic lights, end of queue measures, and more visible and meaningful signage.

Heavy vehicle safety in Oman: Police interviews and heavy vehicle driver survey and focus groups. Third Report of the Heavy Vehicle Safety Research in Oman Project for The Research Council of Oman.

Over the past six months the project has undertaken three key, separate, data collection rounds. Each of these rounds focused on essentially different issues within the broader common construct of heavy vehicle road safety. This document will initially report on a series of two key qualitative data collections rounds. Firstly it will detail findings and report on discussions held in focus groups with 43 heavy vehicle drivers. The second qualitative study involved a series of interviews undertaken with 19 police officers from various levels of command and operations within the Royal Oman Police. The final data collection round reported on in this document is a roadside survey questionnaire undertaken with 400 heavy vehicle drivers.

Focus group discussions exploring major social influences on young driver safety in Oman. Report to the Research Council of Oman, Muscat.

This report documents the findings of in-depth focus groups conducted with 17 young drivers. The main aim of these focus groups was to explore key themes related to the risky behaviour of young drivers (17-25 years) in Oman. Specifically the interviews explored the influence of parents and peers, who may serve as a source of imitation, reward and punishment. Additionally, the interviews explored the influence of policing and licensing on young driver behaviour.

Preliminary analysis of self-report questionnaire with young drivers in Oman. Fourth report of the novice driver safety research in Oman project for the Research Council of Oman

This report document the recent progress (current as of December 2014) of the research project investigating novice driver safety in Oman. Included in this report is a summary of progress with publications to date, as well as description of the preliminary results of the first phase of the quantitative survey with young drivers. With regards to the publications which have resulted from this research, two journal articles have been published in print, one is under review, and a fourth is in the late stages of development for submission...

A review and comparative analysis of international drug driving policies. Report to the New South Wales (NSW) Centre for Road Safety

The New South Wales (NSW) Centre for Road Safety (CRS) called for research services to conduct a review of international policy and practice to address drug-driving. The project sought to provide Transport for NSW (TfNSW) with a comprehensive review of current and emerging international practices in this area1. This report is submitted by the Centre for Accident Research and Road Safety – Queensland (CARRS-Q)...

Safety envelope for security

We present an approach for detecting sensor spoofing attacks on a cyber-physical system. Our approach consists of two steps. In the first step, we construct a safety envelope of the system. Under nominal conditions (that is, when there are no attacks), the system always stays inside its safety envelope. In the second step, we build an attack detector: a monitor that executes synchronously with the system and raises an alarm whenever the system state falls outside the safety envelope. We synthesize safety envelopes using a modified machine learning procedure applied on data collected from the system when it is not under attack. We present experimental results that show effectiveness of our approach, and also validate the several novel features that we introduced in our learning procedure.

Safety of OPRA procedure for individuals with upper limb amputation

Surgical implantations of osseointegrated fixations for bone-anchored prosthesis are developing at an unprecedented pace worldwide while initial skepticism in the orthopedic community is slowly fading away. Clearly, this option is becoming accessible to a wide range of individuals with limb loss. [1-18] The team led by Dr Rickard Branemark has previously published a number of landmark articles focusing on the benefits and safety of the OPRA fixation mainly for individual with lower limb loss, particularly those with transfemoral amputation. [1-3, 19-32] However, similar information is lacking for those with upper limb amputation. This team is once again taking a leading role by sharing a retrospective study focusing on the implant survival, adverse events, implant stability, and bone remodelling for 18 individuals with transhumeral amputation over a 5-year post-operative period. Therefore, a comprehensive analysis of the safety of the procedure is accessible for the first time. In essence, the results showed an implant survival rate of 83% and 80% at 2 and 5 year follow ups, respectively. The most frequent adverse events were superficial skin infections that occurred for 28% (5) participants while the least frequent was deep bone infection that happened only once. More importantly, 38% of complications due to infections were effectively managed with nonoperative treatments (e.g., revision of skin penetration site, local cleaning, antibiotics, restriction of soft tissue mobility). Implant stability and bone remodelling were satisfactory. Clearly, this study provided better understanding of the safety of the OPRA surgical and rehabilitation procedure for individuals with upper limb amputation while establishing standards and benchmark data for future studies. However, strong evidences of the benefits are yet to be demonstrated. However, increase in health related quality of life and functional outcomes (e.g., range of movement) are likely. Altogether, the team of authors are providing further evidence that bone-anchored attachment is definitely a promising alternative to socket prostheses.

Examining the effectiveness of Police-Citizens Youth Clubs on crime prevention and community safety

PCYCs, individually and as a whole, are highly valued in communities across Queensland. Participants in this evaluation identified numerous benefits of PCYCs, including: providing structured low-cost activities for young people and other community groups; developing positive relationships and trust between young people and police; developing young people into effective citizens; providing a safe place for young people and a hub for whole communities; addressing disadvantages faced by young people; and fostering social inclusion. Depending on the particular activities and programs delivered by a branch, PCYCs have the capacity to minimise risk factors and enhance protective factors relating to young people’s involvement in crime. For example, PCYCs can play an important role in strengthening young people’s engagement with education and family. However, the crime prevention and community safety aims of PCYCs, and measures that might work towards these aims are not widely- or well-understood, or appreciated, by those working in and with PCYCs. The key recommendation of this evaluation is therefore that the crime prevention and community safety aims of PCYCs in Queensland need to be better articulated, understood and reflected in the practice of those working in and with PCYCs. A related key finding is that many of the activities and programs currently provided by PCYCs could be better oriented towards the goals of crime prevention and community safety without major resource implications.

Driver’s behavioural changes with new Intelligent Transport System interventions at railway level crossings: A driving simulator study

Improving safety at railway level crossings is an important issue for the Australian transport system. Governments, the rail industry and road organisations have tried a variety of countermeasures for many years to improve railway level crossing safety. New types of Intelligent Transport System (ITS) interventions are now emerging due to the availability and the affordability of technology. These interventions target both actively and passively protected railway level crossings and attempt to address drivers’ errors at railway crossings, which are mainly a failure to detect the crossing or the train and misjudgement of the train approach speed and distance. This study aims to assess the effectiveness of three emerging ITS that the rail industry considers implementing in Australia: a visual in-vehicle ITS, an audio in-vehicle ITS, as well as an on-road flashing beacons intervention. The evaluation was conducted on an advanced driving simulator with 20 participants per trialled technology, each participant driving once without any technology and once with one of the ITS interventions. Every participant drove through a range of active and passive crossings with and without trains approaching. Their speed approach of the crossing, head movements and stopping compliance were measured. Results showed that driver behaviour was changed with the three ITS interventions at passive crossings, while limited effects were found at active crossings, even with reduced visibility. The on-road intervention trialled was unsuccessful in improving driver behaviour; the audio and visual ITS improved driver behaviour when a train was approaching. A trend toward worsening driver behaviour with the visual ITS was observed when no trains were approaching. This trend was not observed for the audio ITS intervention, which appears to be the ITS intervention with the highest potential for improving safety at passive crossings.

Driving simulator evaluation of the failure of an audio in-vehicle warning for railway level crossings

It is impracticable to upgrade the 18,900 Australian passive crossings as such crossings are often located in remote areas, where power is lacking and with low road and rail traffic. The rail industry is interested in developing innovative in-vehicle technology interventions to warn motorists of approaching trains directly in their vehicles. The objective of this study was therefore to evaluate the benefits of the introduction of such technology. We evaluated the changes in driver performance once the technology is enabled and functioning correctly, as well as the effects of an unsafe failure of the technology? We conducted a driving simulator study where participants (N=15) were familiarised with an in-vehicle audio warning for an extended period. After being familiarised with the system, the technology started failing, and we tested the reaction of drivers with a train approaching. This study has shown that with the traditional passive crossings with RX2 signage, the majority of drivers complied (70%) and looked for trains on both sides of the rail track. With the introduction of the in-vehicle audio message, drivers did not approach crossings faster, did not reduce their safety margins and did not reduce their gaze towards the rail tracks. However participants’ compliance at the stop sign decreased by 16.5% with the technology installed in the vehicle. The effect of the failure of the in-vehicle audio warning technology showed that most participants did not experience difficulties in detecting the approaching train even though they did not receive any warning message. This showed that participants were still actively looking for trains with the system in their vehicle. However, two participants did not stop and one decided to beat the train when they did not receive the audio message, suggesting potential human factors issues to be considered with such technology.