Strength properties of composite clay balls containing additives from industry wastes as new filter media in water treatment

Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to 1100 0C at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.

Ants, apples and the ABCs: The use of commercial phonics programmes in prior-to-school children's services

Commercial phonics programmes (e.g. Jolly Phonics and Letterland) are becoming widely used in the early years of school. These programmes claim to use a systematic explicit approach, considered as the preferred method of phonics instruction for teaching alphabetic code-breaking skills in Australia and the UK in the first years of school (Department of Education, Science and Training, 2005; Rose, 2006). However, little is known about the extent to which they are being used in prior-to-school settings, and the reasons behind decisions to use them. This study surveyed 283 early childhood staff in Sydney, Australia and found that commercial phonics programmes were being used in 36% of the early childhood settings surveyed. Staff with early childhood univer- sity qualifications and staff working in not-for-profit service types were less likely to use a commercial phonics programme than staff without university qualifications and staff working in for-profit services. Staff with less than 10 years’ experience were also more likely to use a commercial phonics programme. The rationale behind decisions deter- mining whether or not staff used the programmes ranged from pragmatic reasons, such as parent pressure or higher management decisions, to pedagogical reasons, such as teacher beliefs about how children learn to read and write. The practices staff engage in to teach phonics are explored.

Pre-packaging preschool literacy: What drives early childhood teachers to use commercially produced phonics programs in prior to school settings

Language-rich environments are key to overall quality in early childhood settings, including frequent child–staff interactions around picture books and dramatic play. In a language-rich environment, explicit teaching of literacy concepts, such as phonics, is embedded in authentic and meaningful situations where alphabet letters and sounds are taught in a context meaningful to the child. Recent research, however, suggests that the use of commercial pre-packaged phonics programs (such as Letterland and Jolly Phonics) is widespread in prior to school settings in Sydney, Australia. Little is known about why early childhood teachers choose to use such programs with children aged five and under. In the present study, thematic analysis of data from interviews with five early childhood teachers using commercial phonics programs found that their reasons were pragmatic rather than pedagogical. Motivations included the idea that the programs reduced their workload, provided tangible evidence to parents of their child’s ‘school readiness’, and served as a marketing tool to attract parents. Further analysis found that the teachers were unable to articulate what phonics and phonological awareness are and how they are learnt in early childhood.

Quality of discharge summaries sent by a regional hospital to general practitioners

Background A comprehensive hospital discharge summary sent to the patient's general practitioner in a timely manner can ease patient transition between care settings. Aim To investigate the quality of discharge summaries sent by a regional hospital to GPs; and to evaluate GPs' satisfaction with the medication list contained in the discharge summary. Method A questionnaire was mailed to a sample of 80 Gold Coast GPs who had made more than five referrals to the Gold Coast Hospital during June 2009. Results 18 responses (23% response rate) were received from September to October 2009. The majority (67%) of GPs received discharge summaries from the hospital and they were mostly in an electronic format with attached medication lists. The reasons for changing medications were not well explained and the timeframe for receiving summaries was considered unsatisfactory. Overall, the majority of GPs were satisfied with the quality of the discharge summaries. Conclusion GPs mostly received the discharge summaries and the majority received them electronically. The majority of GPs indicated that the medication lists were often attached to the discharge summaries and changes to medications recorded.

A commentary on the global position of South African accounting research

The South African designation of Chartered Accountant is comparable to similar designations in most developed countries. However, the research outputs of Accountancy academics in South Africa seem to lag far behind those of their counterparts abroad. This article discusses the results of several inquiries into the status of South African Accounting research in a global context, and identifies several reasons and possible remedies for low research output.

Systems-based approach to investigate unsafe pedestrian behaviour at level crossings

Crashes at level crossings are a major issue worldwide. In Australia, as well as in other countries, the number of crashes with vehicles has declined in the past years, while the number of crashes involving pedestrians seems to have remained unchanged. A systematic review of research related to pedestrian behaviour highlighted a number of important scientific gaps in current knowledge. The complexity of such intersections imposes particular constraints to the understanding of pedestrians’ crossing behaviour. A new systems-based framework, called Pedestrian Unsafe Level Crossing framework (PULC) was developed. The PULC organises contributing factors to crossing behaviour on different system levels as per the hierarchical classification of Jens Rasmussen’s Framework for Risk Management. In addition, the framework adapts James Reason’s classification to distinguish between different types of unsafe behaviour. The framework was developed as a tool for collection of generalizable data that could be used to predict current or future system failures or to identify aspects of the system that require further safety improvement. To give it an initial support, the PULC was applied to the analysis of qualitative data from focus groups discussions. A total number of 12 pedestrians who regularly crossed the same level crossing were asked about their daily experience and their observations of others’ behaviour which allowed the extraction and classification of factors associated with errors and violations. Two case studies using Rasmussen’s AcciMap technique are presented as an example of potential application of the framework. A discussion on the identified multiple risk contributing factors and their interactions is provided, in light of the benefits of applying a systems approach to the understanding of the origins of individual’s behaviour. Potential actions towards safety improvement are discussed.

Fatal consequences: An analysis of the failed employee voice system at the Bundaberg Hospital

In this paper we discuss the failure of the employee voice system at the Bundaberg Base Hospital (BBH) in Australia. Surgeon Jayant Patel was arrested over the deaths of patients on whom he operated when he was the director of surgery at the hospital. Our interest is in the reasons the established employee voice mechanisms failed when employees attempted to bring serious issues to the attention of managers. Our data is based on an analysis of the sworn testimonies of participants who participated in two inquiries concerning these events. An analysis of the events with a particular focus on the failings of the voice system is presented. We ask the following: how and why did the voice systems in the case of the BBH fail?

Ageing Australian unions and the ‘youth problem’

Trade union membership, both in aggregate numbers and in density, has declined in the majority of advanced economies globally over recent decades (Blanchflower, 2007). In Australia, the decline in the 1990s was somewhat more precipitate than in most countries (Peetz, 1998). As discussed in Chapter 1, reasons for the decline are multifactorial, including a more hostile environment to unionism created by employers and the state, difficulties ·with workplace union organisation, and structural change in the economy (Bryson and Gomez, 2005; Bryson et a!., 2011; Ebbinghaus et al., 2011; Payne, 1989; Waddington and Kerr, 2002; Waddington and Whitson, 1997). Our purpose in this chapter is to look beyond aggregate Australian union density data, to examine how age relates to membership decline, and how different age groups, particularly younger workers, are located in the story of union decline. The practical implications of this research are that understanding how unions relate to workers of different age groups, and to workers of different genders amongst those age groups, may lead to improved recruitment and better union organisation.

Hepatitis C and initiates into injecting drug use among young people: Part I: The first shot

Explores how young people in Australia first come to inject drugs and how they learn about hepatitis C and sterile injecting drug use. Background on hepatitis C; Reasons for injecting drugs; Selection criteria for young people's participation in the i2i Project.

Where do ED patients come from?

A lack of access to primary care services, decreasing numbers of general practitioners (GPs) and free of charge visits have been cited as factors contributing to the rising demand on emergency departments. This study aims to investigate the sources of patients' referrals to emergency departments and track changes in the source of referral over a six-year period in Queensland. Data from Queensland Emergency Departments Information Systems were analyzed based on records from 21 hospitals for the periods 2003–04 to 2008–09. The emergency department data were compared with publicly available data on GPs services and patients attendance rates. In Queensland, the majority of patients are self-referred and a 6.6% growth between 2003–04 and 2008–09 (84.4% to 90% respectively) has been observed. The number of referrals made by GPs, hospitals and community services decreased by 29.4%, 40%, 42% respectively during the six-year period. The full-time workload equivalent GPs per 100,000 people increased by 4.5% and the number of GP attendances measured per capita rose by 4% (4.25 to 4.42). An examination of changes in the triage category of self-referred patients revealed an increase in triage category 1-3 by 60%, 36.2%, and 14.4% respectively. The number of self-referred patients in triage categories 4–5 decreased by 10.5% and 21.9% respectively. The results of this analysis reveal that although the number of services provided by GPs increased, the amount of referrals decreased, and the proportion of self-referred patients to emergency departments rose during the six-year period. In addition, a growth in urgent triage categories (1–3) has been observed, with a decline in the number of non-urgent categories (4–5) among patients who came directly to emergency departments. Understanding the reasons behind this situation is crucial for appropriate demand management. Possible explanations will be sought and presented based on patients' responses to an emergency department users' questionnaire.

The psychosocial purpose of driving and its relationship with the risky driving behaviour of young novice drivers

Background The overrepresentation of young drivers in road crashes, injuries and fatalities around the world has resulted in a breadth of injury prevention efforts including education, enforcement, engineering, and exposure control. Despite multifaceted intervention, the young driver problem remains a challenge for injury prevention researchers, practitioners and policy-makers. The intractable nature of young driver crash risks suggests that a deeper understanding of their car use – that is, the purpose of their driving – is required to inform the design of more effective young driver countermeasures. Aims This research examined the driving purpose reported by young drivers, including the relationship with self-reported risky driving behaviours including offences. Methods Young drivers with a Learner or Provisional licence participated in three online surveys (N1 = 656, 17–20 years; N2 = 1051, 17–20 years; N3 = 351, 17–21 years) as part of a larger state-wide project in Queensland, Australia. Results A driving purpose scale was developed (the PsychoSocial Purpose Driving Scale, PSPDS), revealing that young drivers drove for psychosocial reasons such as for a sense of freedom and to feel independent. Drivers who reported the greatest psychosocial purpose for driving were more likely to be male and to report more risky driving behaviours such as speeding. Drivers who deliberately avoided on-road police presence and reported a prior driving-related offence had significantly greater PSPDS scores, and higher reporting of psychosocial driving purposes was found over time as drivers transitioned from the supervised Learner licence phase to the independent Provisional (intermediate) licence phase. Discussion and conclusions The psychosocial needs met by driving suggest that effective intervention to prevent young driver injury requires further consideration of their driving purpose. Enforcement, education, and engineering efforts which consider the psychosocial purpose of the driving are likely to be more efficacious than those which presently do not. Road safety countermeasures could reduce the young driver’s exposure to risk through such mechanisms as encouraging the use of public transport.

Learning choices, older Australians and active ageing

This paper reports on the findings of qualitative, semi-structured interviews conducted with 40 older Australian participants who either did or did not engage in organized learning. Phenomenology was used to guide the interviews and analysis to explore the lived learning experiences and perspectives of these older people. Their experiences of learning can be described in two main categories of pleasure and leisure or purpose and relevance. Almost all the activities described in these categories have the potential to support health and wellbeing. Organisers of activities should take these reasons into account.

Public use and perceptions of emergency departments: A population survey

Objectives To inform demand management strategies aimed at reducing congestion in EDs by: (i) identifying public use of EDs, decision-making and reasons; and (ii) measuring acceptance of alternative care models. Methods A cross-sectional telephone survey of a random sample of Queensland population aged 18 years or older residing in a dwelling unit in Queensland that could be contacted on a land-based telephone service was conducted. One person per household was selected according to a predetermined algorithm to ensure sex and regional balance were interviewed. The main outcome measures were: ED use, attitudes towards ED staff and services, and alternative models of care. Results The final sample included a total of 1256 respondents (response rate = 40.3%). Twenty-one per cent attended EDs in the preceding 12 months. The decision to attend was made by patients (51%), health and medical professionals (31%), and others (18%). The main reasons included perceived severity of the illness (47%), unavailability of alternative services (26%) and better care (11%). Most respondents agreed with more flexible care models of service delivery including incentives for general practitioners (90%), private health insurance coverage for ED use (89%), and enhanced roles for paramedics and nurses. Conclusions Main reason for attending ED is perceived severity of illness, followed by lack of alternative care. The majority of both consumers and the public are in favour of more flexible care models. However, further research is necessary to detail those alternatives and to test and validate their effectiveness.

Technological adoption and use after mass market displacement: The case of the LP record

This paper investigates the reasons why some technologies, defying general expectations and the established models of technological change, may not disappear from the market after having been displaced from their once-dominant status. Our point of departure is that the established models of technological change are not suitable to explain this as they predominantly focus on technological dominance, giving attention to the technologies that display highest performance levels and gain greatest market share. And yet, technological landscapes are rife with technological designs that do not fulfil these conditions. Using the LP record as an empirical case, we propose that the central mechanism at play in the continuing market presence of once-dominant technologies is the recasting of their technological features from the functional-utilitarian to the aesthetic realm, with an additional element concerning communal interaction among users. The findings that emerge from our quantitative textual analysis of over 200,000 posts on a prominent online LP-related discussion forum (between 2002 and 2010) also suggest that the post-dominance technology adopters and users appear to share many key characteristics with the earliest adopters of new technologies, rather than with late-stage adopters which precede them.

Are we getting accurate measurements of Ksat for sodic clay soils?

In this paper we discuss the use of a series of column experiments to improve understanding of the effect irrigation water chemistry (saline solutions) has on measurements of saturated hydraulic conductivity (Ksat) of a sodic clay soil. We highlight in particular the use of extended leaching periods to determine whether the duration of leaching affects the results. In the experiments, mixed cation solutions of two different salinity levels, 50 meq/L and 100 meq/L, were applied under constant head to columns of a repacked sodic clay soil using three replicates for each treatment. The maximum Ksat measured during leaching with the 100 meq/L solution was approximately double the maximum Ksat measured during leaching with the 50 meq/L solution. Measured flow rates were found to increase rapidly after flow commenced then decrease gradually until flow rates became stable. The final, stable flow rate was roughly 80% less than the maximum flow rate measured. Reasons for these changes in saturated hydraulic conductivity are discussed. The key finding from these experiments is that long term leaching, involving significantly more pore volumes than is commonly reported in the literature, is required to obtain a ‘stable’ Ksat. We recommend that further studies be carried out to (1) determine whether similar behaviour in Ksat occurs in a wide range of sodic clay soils and (2) to help build a better understanding of the causes and implications of the observed behaviour in Ksat.