Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring

In the structural health monitoring (SHM) field, long-term continuous vibration-based monitoring is becoming increasingly popular as this could keep track of the health status of structures during their service lives. However, implementing such a system is not always feasible due to on-going conflicts between budget constraints and the need of sophisticated systems to monitor real-world structures under their demanding in-service conditions. To address this problem, this paper presents a comprehensive development of a cost-effective and flexible vibration DAQ system for long-term continuous SHM of a newly constructed institutional complex with a special focus on the main building. First, selections of sensor type and sensor positions are scrutinized to overcome adversities such as low-frequency and low-level vibration measurements. In order to economically tackle the sparse measurement problem, a cost-optimized Ethernet-based peripheral DAQ model is first adopted to form the system skeleton. A combination of a high-resolution timing coordination method based on the TCP/IP command communication medium and a periodic system resynchronization strategy is then proposed to synchronize data from multiple distributed DAQ units. The results of both experimental evaluations and experimental–numerical verifications show that the proposed DAQ system in general and the data synchronization solution in particular work well and they can provide a promising cost-effective and flexible alternative for use in real-world SHM projects. Finally, the paper demonstrates simple but effective ways to make use of the developed monitoring system for long-term continuous structural health evaluation as well as to use the instrumented building herein as a multi-purpose benchmark structure for studying not only practical SHM problems but also synchronization related issues.

Effective removal of zinc (II) from aqueous solutions by tricalcium aluminate (C3A)

Recently, studies have identified high zinc levels in various environmental resources, and excessive intake of zinc has long been considered to be harmful to human health. The aim of this research was to investigate the effectiveness of tricalcium aluminate (C3A) as a removal agent of zinc from aqueous solution. Inductively coupled plasma-atomic emission spectrometer (ICP-AES), X-ray diffraction (XRD) and scanning electron microscopy (SEM) have been used to characterize such removal behavior. The effects of various factors such as pH influence, temperature and contact time were investigated. The adsorption capacity of C3A for Zn2+ was computed to be up to 13.73 mmol g−1, and the highest zinc removal capacity was obtained when the initial pH of Zn(NO3)2 solution was between 6.0 and 7.0, with temperature around 308 K. The XRD analysis showed that the resultant products were ZnAl-LDHs. Combined with the analysis of solution component, it was proved the existence of both precipitation and cation exchange in the removal process. From the experimental results, it was clear that C3A could be potentially used as a cost-effective material for the removal of zinc in aqueous environment.

An individual-based versus group-based exercise and counselling intervention for improving quality of life in breast cancer survivors. A feasibility and efficacy study

Background Cancer and its treatments produce lingering side-effects that undermine the quality of life (QOL) of survivors. Exercise and psycho-therapies increase QOL among survivors, however, research is needed to identify intervention characteristics most associated with such improvements. Objective This research aimed to assess the feasibility of a 9 week individual or group based exercise and counselling program, and to examine if a group based intervention is as effective at improving the QOL of breast cancer survivors as an individual-based intervention. Methods A three group design was implemented to compare the efficacy of a 9 week individual (IEC n = 12) and group based exercise and counselling (GEC n = 14) intervention to a usual care (UsC n = 10) group on QOL of thirty-six breast cancer survivors. Results Across all groups, 90% of participants completed the interventions, with no adverse effects documented. At the completion of the intervention, there was a significant difference between groups for change in global QOL across time (p < 0.023), with IEC improving significantly more (15.0 points) than the UsC group (1.8 points). The effect size was moderate (0.70). Although the GEC improved QOL by almost 10.0 points, this increase did not reach significance. Both increases were above the minimally important difference of 7–8 points. Conclusion These preliminary results suggest a combined exercise and psychological counseling program is both a feasible and acceptable intervention for breast cancer survivors. Whilst both the individual and group interventions improved QOL above the clinically important difference, only the individual based intervention was significant when compared to UsC.

Data driven and practice-based evidence : design and development of efficient and effective clinical decision support system

Decision-making is such an integral aspect in health care routine that the ability to make the right decisions at crucial moments can lead to patient health improvements. Evidence-based practice, the paradigm used to make those informed decisions, relies on the use of current best evidence from systematic research such as randomized controlled trials. Limitations of the outcomes from randomized controlled trials (RCT), such as “quantity” and “quality” of evidence generated, has lowered healthcare professionals’ confidence in using EBP. An alternate paradigm of Practice-Based Evidence has evolved with the key being evidence drawn from practice settings. Through the use of health information technology, electronic health records (EHR) capture relevant clinical practice “evidence”. A data-driven approach is proposed to capitalize on the benefits of EHR. The issues of data privacy, security and integrity are diminished by an information accountability concept. Data warehouse architecture completes the data-driven approach by integrating health data from multi-source systems, unique within the healthcare environment.

Effective communication during disasters: What effects community decision making & action?

Study/Objective This paper describes a program of research examining emergency messaging during the response and early recovery phases of natural disasters. The objective of this suite of studies is to develop message construction frameworks and channels that maximise community compliance with instructional messaging. The research has adopted a multi-hazard approach and considers the impact of formal emergency messages, as well as informal messages (e.g., social media posts), on community compliance. Background In recent years, media reports have consistently demonstrated highly variable community compliance to instructional messaging during natural disasters. Footage of individuals watching a tsunami approaching from the beach or being over-run by floodwaters are disturbing and indicate the need for a clearer understanding of decision making under stress. This project’s multi-hazard approach considers the time lag between knowledge of the event and desired action, as well as how factors such as message fatigue, message ambiguity, and the interplay of messaging from multiple media sources are likely to play a role in an individual’s compliance with an emergency instruction. Methods To examine effective messaging strategy, we conduct a critical analysis of the literature to develop a framework for community consultation and design experiments to test the potential for compliance improvement. Results Preliminary results indicate that there is, as yet, little published evidence on which to base decisions about emergency instructional messages to threatened communities. Conclusion The research described here will contribute improvements in emergency instructional message compliance by generating an evidence-based framework that takes into account behavioural compliance theory, the psychology of decision making under stress, and multiple channels of communication including social media.

Effective communication during disasters

This paper describes a program of research examining emergency messaging during the response and early recovery phases of natural disasters. The objective of this suite of studies is to develop message construction frameworks and channels that maximise community compliance with instructional messaging. The research has adopted a multi-hazard approach and considers the impact of formal emergency messages, as well as informal messages (e.g., social media posts), on community compliance. In recent years, media reports have consistently demonstrated highly variable community compliance to instructional messaging during natural disasters. Footage of individuals watching a tsunami approaching from the beach or being over-run by floodwaters are disturbing and indicate the need for a clearer understanding of decision making under stress. This project’s multi-hazard approach considers the time lag between knowledge of the event and desired action, as well as how factors such as message fatigue, message ambiguity, and the interplay of messaging from multiple media sources are likely to play a role in an individual’s compliance with an emergency instruction. To examine effective messaging strategy, we conduct a critical analysis of the literature to develop a framework for community consultation and design experiments to test the potential for compliance improvement. Preliminary results indicate that there is, as yet, little published evidence on which to base decisions about emergency instructional messages to threatened communities. The research described here will contribute improvements in emergency instructional message compliance by generating an evidence-based framework that takes into account behavioural compliance theory, the psychology of decision making under stress, and multiple channels of communication including social media.

Effective emergency messaging during natural disasters: An application of message compliance theories

Study/Objective This research examines the types of emergency messages used in Australia during the response and early recovery phases of a natural disaster. The aim of the research is to develop theory-driven emergency messages that increase individual behavioural compliance during a disaster. Background There is growing evidence of non-compliant behaviour in Australia, such as refusing to evacuate and travelling through hazardous areas. This can result in personal injury, loss of life, and damage to (or loss of) property. Moreover, non-compliance can place emergency services personnel in life-threatening situations when trying to save non-compliant individuals. Drawing on message compliance research in psychology and sociology, a taxonomy of message types was developed to ascertain how emergency messaging can be improved to produce compliant behaviour. Method A review of message compliance literature was conducted to develop the taxonomy of message types previously found to achieve compliance. Seven categories were identified: direct-rational, manipulation, negative phrasing, positive phrasing, exchange appeals, normative appeals, and appeals to self. A content analysis was then conducted to assess the emergency messages evident in the Australian emergency management context. The existing messages were aligned with the literature to identify opportunities to improve emergency messaging. Results & Conclusion The results suggest there is an opportunity to improve the effectiveness of emergency messaging to increase compliance during the response and early recovery phases of a natural disaster. While some message types cannot legally or ethically be used in emergency communication (e.g. manipulative messaging), there is an opportunity to create more persuasive messages (e.g. appeals to self) that personalise the individual’s perception of risk, triggering them to comply with the message.

How everyday language can and will boost effective information retrieval

Typing 2 or 3 keywords into a browser has become an easy and efficient way to find information. Yet, typing even short queries becomes tedious on ever shrinking (virtual) keyboards. Meanwhile, speech processing is maturing rapidly, facilitating everyday language input. Also, wearable technology can inform users proactively by listening in on their conversations or processing their social media interactions. Given these developments, everyday language may soon become the new input of choice. We present an information retrieval (IR) algorithm specifically designed to accept everyday language. It integrates two paradigms of information retrieval, previously studied in isolation; one directed mainly at the surface structure of language, the other primarily at the underlying meaning. The integration was achieved by a Markov machine that encodes meaning by its transition graph, and surface structure by the language it generates. A rigorous evaluation of the approach showed, first, that it can compete with the quality of existing language models, second, that it is more effective the more verbose the input, and third, as a consequence, that it is promising for an imminent transition from keyword input, where the onus is on the user to formulate concise queries, to a modality where users can express more freely, more informal, and more natural their need for information in everyday language.

Towards robust automatic affective classification of images using facial expressions for practical applications

Affect is an important feature of multimedia content and conveys valuable information for multimedia indexing and retrieval. Most existing studies for affective content analysis are limited to low-level features or mid-level representations, and are generally criticized for their incapacity to address the gap between low-level features and high-level human affective perception. The facial expressions of subjects in images carry important semantic information that can substantially influence human affective perception, but have been seldom investigated for affective classification of facial images towards practical applications. This paper presents an automatic image emotion detector (IED) for affective classification of practical (or non-laboratory) data using facial expressions, where a lot of “real-world” challenges are present, including pose, illumination, and size variations etc. The proposed method is novel, with its framework designed specifically to overcome these challenges using multi-view versions of face and fiducial point detectors, and a combination of point-based texture and geometry. Performance comparisons of several key parameters of relevant algorithms are conducted to explore the optimum parameters for high accuracy and fast computation speed. A comprehensive set of experiments with existing and new datasets, shows that the method is effective despite pose variations, fast, and appropriate for large-scale data, and as accurate as the method with state-of-the-art performance on laboratory-based data. The proposed method was also applied to affective classification of images from the British Broadcast Corporation (BBC) in a task typical for a practical application providing some valuable insights.

A laboratory assessment of the choice of vessel size under individual transferable quota regimes

This paper examines the effect of individual transferable quota regimes on technology choice, such as choice of vessel size, by using the laboratory experiment method. We find that even if vessel sizes change over time, the quota price can converge to the fundamental value conditioned on the vessels chosen. We also find that subjects choose their vessel type to maximise their profits based on the quota trading prices in the previous period. This result implies that the efficiency of quota markets in the beginning period is important because any inefficiency in quota markets may affect vessel sizes in ensuing periods. Moreover, we find that the initial allocations may significantly influence vessel sizes through two channels: first, a higher initial allocation to a subject increases the likelihood that the subject invests in a large-sized vessel; second, the quota price may be higher and more unstable under unequal allocation than under equal allocation; thus, whether the allocation is equal influences subjects' choice of vessel type. © 2014 Australian Agricultural and Resource Economics Society Inc.

Size-resolved particle distribution and gaseous concentrations by real-world road tunnel measurement

Measurements of aerosol particle number size distributions (15-700 nm), CO and NOx were performed in a bus tunnel, Australia. Daily mean particle size distributions of mixed diesel/CNG (Compressed Natural Gas) buses traffic flow were determined in 4 consecutive measurement days. EFs (Emission Factors) of Particle size distribution of diesel buses and CNG buses were obtained by MLR (Multiple Linear Regression) methods, particle distributions of diesel buses and CNG buses were observed as single accumulation mode and nuclei-mode separately. Particle size distributions of mixed traffic flow were decomposed by two log-normal fitting curves for each 30 minutes interval mean scans, all the mix fleet PSD emission can be well fitted by the summation of two log-normal distribution curves, and these were composed of nuclei mode curve and accumulation curve, which were affirmed as the CNG buses and diesel buses PN emission curves respectively. Finally, particle size distributions of diesel buses and CNG buses were quantified by statistical whisker-box charts. For log-normal particle size distribution of diesel buses, accumulation mode diameters were 74.5～87.5nm, geometric standard deviations were 1.89～1.98. As to log-normal particle size distribution of CNG buses, nuclei-mode diameters were 21～24 nm, geometric standard deviations were 1.27～1.31.

Effective intercalation of sodium dodecylsulfate (SDS) into hydrocalumite: Mechanism discussion via near-infrared and mid-infrared investigations

The intercalation of an anionic surfactant, sodium dodecylsulfate (SDS), into hydrocalumite (CaAl-LDH-Cl) was investigated in this study. To understand the intercalation behavior, X-ray diffraction (XRD), mid-infrared spectroscopy (MIR), near-infrared spectroscopy (NIR) and scanning electron microscopy (SEM) were undertaken. The near-infrared spectra indicated a special spectral range from 6000 to 5600cm-1and prominent bands of CaAl-LDH-Cl intercalated with SDS around 8388cm-1. This band was assigned to the second overtone of the first fundamental of CH stretching vibrations of SDS, and it could be used to determinate the result of CaAl-LDH-Cl modified by SDS. Moreover, the results revealed that different adsorption behaviors were observed at different (high and low) concentrations of SDS. When the SDS concentration was around 0.2molL-1, anion exchange intercalation occurred and the interlayer distance expanded to about 3.25nm. When SDS concentration was 0.005molL-1, the surface adsorption of DS- was the major anion exchange event.

Field size consistency of nominally matched linacs

Given that there is increasing recognition of the effect that submillimetre changes in collimator position can have on radiotherapy beam dosimetry, this study aimed to evaluate the potential variability in small field collimation that may exist between otherwise matched linacs. Field sizes and field output factors were measured using radiochromic film and an electron diode, for jaw- and MLC-collimated fields produced by eight dosimetrically matched Varian iX linacs (Varian Medical Systems, Palo Alto, USA). This study used nominal sizes from 0.6×0.6 to 10×10 cm215 , for jaw-collimated fields,and from 1×1 to 10×10 cm216 , for MLC-collimated fields, delivered from a zero (head up, beam directed vertically downward) gantry angle. Differences between the field sizes measured for the eight linacs exceeded the uncertainty of the film measurements and the repositioning uncertainty of the jaws and MLCs on one linac. The dimensions of fields defined by MLC leaves were more consistent between linacs, while also differing more from their nominal values than fields defined by orthogonal jaws. The field output factors measured for the different linacs generally increased with increasing measured field size for the nominal 0.6×0.6 and 1×1 cm2 fields, and became consistent between linacs for nominal field sizes of 2×2 cm2 25 and larger. The inclusion in radiotherapy treatment planning system beam data of small field output factors acquired in fields collimated by jaws (rather than the more-reproducible MLCs), associated with either the nominal or the measured field sizes, should be viewed with caution. The size and reproducibility of the fields (especially the small fields) used to acquire treatment planning data should be investigated thoroughly as part of the linac or planning system commissioning process. Further investigation of these issues, using different linac models, collimation systems and beam orientations, is recommended.

Quantitative assessment and characterisation of airborne engineered nanoparticles

This research has brought new scientific insight into the characteristics of airborne engineered nanoparticles, which is essential when considering their effects on human health. The key findings of the work were a harmonised and traceable protocol for the size characterisation of engineered nanoparticles, and quantification of their emissions and dynamics in workplaces. The novelty of this project is in coupling a comprehensive experimental measurement approach with innovative and effective data interpretation. Also, for the first time, the existence of a general trend in the emission of nanoparticles from a nanotechnology process was investigated.

Effect of carrier size on the dispersion of salmeterol xinafoate from interactive mixtures

The objective of this study was to determine the influence of lactose carrier size on drug dispersion of salmeterol xinafoate (SX) from interactive mixtures. SX dispersion was measured by using the fine particle fractions determined by a twin stage impinger attached to a Rotahaler1. The particle size of the lactose carrier in the SX interactive mixtures was varied using a range of commercial inhalation-grade lactoses. In addition, differing size fractions of individual lactose samples were achieved by dry sieving. The dispersion ofSXappeared to increase as the particle size of the lactose carrier decreased for the mixtures prepared from different particle size commercial samples of lactose and from different sieve fractions of the same lactose. Fine particles of lactose (<5 mm) associated with the lactose carrier were removed from the carrier surface by a wet decantation process to produce lactose samples with low but similar concentrations of fine lactose particles. The fine particle fractions of SX in mixtures prepared with the decanted lactose decreased significantly (analysis of variance, p<0.001) and the degree of dispersion became independent of the volume mean diameter of the carriers (analysis of variance, p<0.05). The dispersion behavior is therefore associated with the presence of fine adhered particles associated with the carriers and the inherent size of the carrier itself has little influence on dispersion.