Disability due to road traffic crashes and the management of road safety in developing countries

Injury as a result of road traffic crashes is one of the most significant public health problems in developing countries. It intersects with disability as a development issue because a substantial proportion of people injured in road traffic crashes experience disability, both short term and long term. While there have been significant steps towards better management of road safety globally, especially in developing countries, the implications for road safety policy and practice of disability due road traffic crashes is not fully appreciated. In particular, qualitative information on the lived experience people with a long term disability as a result of a road traffic crash can inform better road safety policy and practice, as demonstrated in a case study from Thailand. The benefits of better policies and practices are likely to accrue to a wide range of road users, and to contribute to the achievement of sustainable development.

Perceived safety, quality and cultural competency of maternity care for culturally and linguistically diverse women in Queensland

Various policies, plans, and initiatives have been implemented to provide safe, quality, and culturally competent care to patients within Queensland’s healthcare system. A series of models of maternity care are available in Queensland that range from standard public care to private midwifery care. The current study aimed to determine whether identifying as Culturally or Linguistically Diverse (CALD) was associated with the perceived safety, quality, and cultural competency of maternity care from a consumer perspective, and to identify specific needs and preferences of CALD maternity care consumers. Secondary analysis of data collected in the Having a Baby in Queensland Survey 2012 was used to compare the experiences of 655 CALD women to those of 4049 non-CALD women in Queensland, Australia, across three stages of maternity care: pregnancy, labour and birth, and after birth. After adjustment for model of maternity care received and socio-demographic characteristics, CALD women were significantly more likely than non-CALD women to experience suboptimal staff technical competence in pregnancy, overall perceived safety in pregnancy and labour/birth, and interpersonal sensitivity in pregnancy and labour/birth. Approximately 50% of CALD women did not have the choice to use a translator or interpreter, or the gender of their care provider, during labour and birth. Thirteen themes of preferences and needs of CALD maternity care consumers based on ethnicity, cultural beliefs, or traditions were identified, however, these were rarely met. Findings imply that CALD women in Queensland experience disadvantageous maternity care with regards to perceived staff technical competence, safety, and interpersonal sensitivity, and receive care that lacks cultural competence. Improved access to support persons, continuity and choice of carer, and staff availability and training is recommended.

Effectiveness of in-office blood pressure measurement by eye care practitioners in early detection and management of hypertension

AIM To investigate the number of hypertensive patients, the optometrist is able to identify by routinely taking blood pressure (BP) measurements for patients in "at -risk" groups, and to sample patients' opinions regarding in -office BP measurement. Many of the optometrists in Saudi Arabia practice in optical stores. These stores are wide spread, easily accessible and seldom need appointments. The expanding role of the optometrist as a primary health care provider (PHCP) and the increasing global prevalence of hypertension, highlight the need for an integrated approach towards detecting and monitoring hypertension. METHODS Automated BP measurements were made twice (during the same session) at five selected optometry practices using a validated BP monitor (Omron M6) to assess the number of patients with high BP (HBP) - in at -risk groups -visiting the eye clinic routinely. Prior to data collection, practitioners underwent a two-day training workshop by a cardiologist on hypertension and how to obtain accurate BP readings. A protocol for BP measurement was distributed and retained in all participating clinics. The general attitude towards cardiovascular health of 480 patients aged 37.2 (依12.4)y and their opinion towards in-office BP measurement was assessed using a self -administered questionnaire. RESULTS A response rate of 83.6% was obtained for the survey. Ninety -three of the 443 patients (21.0% ) tested for BP in this study had HBP. Of these, (62 subjects) 67.7% were unaware of their HBP status. Thirty of the 105 subjects (28.6%) who had previously been diagnosed with HBP, still had HBP at the time of this study, and only 22 (73.3%) of these patients were on medication. Also, only 25% of the diagnosed hypertensive patients owned a BP monitor. CONCLUSION Taking BP measurements in optometry practices, we were able to identify one previously undiagnosed patient with HBP for every 8 adults tested. We also identified 30 of 105 previously diagnosed patients whose BP was poorly controlled, twenty-two of whom were on medication. The patients who participated in this study were positively disposed toward the routine measurement of BP by optometrists.

A simulator evaluation of effects of assistive technologies on driver cognitive load at railway level crossings

Intelligent Transport Systems (ITS) have the potential to substantially reduce the number of crashes caused by human errors at railway levels crossings. However, such systems could overwhelm drivers, generate different types of driver errors and have negative effects on safety at level crossing. The literature shows an increasing interest for new ITS for increasing driver situational awareness at level crossings, as well as evaluations of such new systems on compliance. To our knowledge, the potential negative effects of such technologies have not been comprehensively evaluated yet. This study aimed at assessing the effect of different ITS interventions, designed to enhance driver behaviour at railway crossings, on driver’s cognitive loads. Fifty eight participants took part in a driving simulator study in which three ITS devices were tested: an in-vehicle visual ITS, an in-vehicle audio ITS, and an on-road valet system. Driver cognitive load was objectively and subjectively assessed for each ITS intervention. Objective data were collected from a heart rate monitor and an eye tracker, while subjective data was collected with the NASA-TLX questionnaire. Overall, results indicated that the three trialled technologies did not result in significant changes in cognitive load while approaching crossings.

Road safety and pavement management: A case study of Tanzania

The implementation of pavement management seems to ignore road safety, with its focus being mainly on infrastructure condition. Safety management as part of pavement management should consider various means of reducing the frequency of vehicle crashes by allocating corrective measures to mitigate accident exposure, as well as reduce accident severity and likelihood. However, it is common that lack of accident records and crash contributing factors impedes incorporating safety into pavement management. This paper presents a case study for the initial development of pavement management systems considering data limitations for 3000 km of Tanzania’s national roads. A performance based optimization utilizes indices for safety and surface condition to allocate corrective measures. A modified Pareto analysis capable of accounting for annual performance and of balancing resources to achieve good surface condition and low levels of safety was applied. Tradeoff analysis for the case study found the need to assign 30% relevance to condition and 70% to road safety. Safety and condition deficiencies were corrected within 5 years with the majority of improvements dedicated to surface treatments and some geometric corrections. Large investments for correcting geometric issues were observed in years two and three if more money was made available.

[await full-text]Evaluation of QAS Workplace Health and Safety Action Plan

This report identifies the outcomes of a program evaluation of the five year Workplace Health and Safety Strategy (2012-2017), specifically, the engagement component within the Queensland Ambulance Service. As part of the former Department of Community Safety, their objective was to work towards harmonising the occupational health and safety policies and process to improve the workplace culture. The report examines and assess the process paths and resource inputs into the strategy, provides feedback on progress to achieving identified goals as well as identify opportunities for improvements and barriers to progress. Consultations were held with key stakeholders within QAS and focus groups were facilitated with managers and health and safety representatives of each Local Area Service Network.

The practical potential of self-advocacy for improving safety outcomes for school-aged workers

Young workers are over-represented in workplace injury statistics and there is growing interest in addressing their vulnerability and safety exposure. Such concerns have been raised within a broader discursive framework of responsibilisation which has seen a transfer of responsibility for workplace safety from employer to worker. This article examines the potential for self-advocacy as a strategy for improving the safety of young workers through the provision of resources to articulate and act on workplace rights. The study utilises data derived from 48 group interviews involving 216 high school students (13–16 years of age) at 19 high schools in Queensland, Australia, who were asked to discuss their knowledge and experience of workplace rights and responsibilities. The limitations of the safety self-advocacy approach are explored, including the social, developmental and organisational issues that might affect the ability or willingness of school-aged workers to self-advocate. The findings reveal that the notion of self-advocacy is internalised by young people before they even enter the formal labour market but that in practice, attempts by young people to enact rights to safety are often dismissed or undermined.

Eye-safe UV stand-off Raman spectroscopy for the ranged detection of explosives in the field

Increasing worldwide terrorist attacks involving explosives presents a growing need for a rapid and ranged explosive detection method that can safely be deployed in the field. Stand-off Raman spectroscopy shows great promise; however, the radiant exposures of lasers required for adequate signal generation are often much greater than what is safe for the eye or the skin, restricting use of the technique to un-populated areas. Here, by determining the safe exposure levels for lasers typically used in Raman spectroscopy, optimal parameter values are identified, which produce the largest possible detection range using power densities that do not exceed the eye-safe limit. It is shown that safe ultraviolet pulse energies can be more than three orders of magnitude greater than equivalent safe visible pulse energies. Coupling this to the 16-fold increase in Raman signal obtained in the ultraviolet at 266 nm over that at 532 nm results in a 131 times larger detection range for the eye-safe 266-nm system over an equivalent eye-safe 532-nm laser system. For the Raman system described here, this translates to a maximum range of 42 m for detecting Teflon with a 266-nm laser emitting a 100-mm diameter beam of 23.5-mJ nanosecond pulses.

Compliance with seafood safety standards within the Vietnamese finfish capture distribution chain

This thesis examined the level of food safety compliance with government regulations and investigated routes of microbiological contaminations in raw finfish within Vietnamese domestic seafood distribution chains. Findings from direct observation, microbiological analysis and employee surveys were synthesized to identify the main factors affecting food safety and hygiene practices of fish distributors. The studies produced clear recommendations for food safety management in the domestic distribution chains. The findings may contribute to national efforts to decrease the risks of fish-borne illness for consumers in Vietnam.

Reviewing in-vehicle systems to improve fuel efficiency and road safety

Road transport plays a significant role in various industries and mobility services around the globe and has a vital impact on our daily lives. However it also has serious impacts on both public health and the environment. In-vehicle feedback systems are a relatively new approach to encouraging driver behavior change for improving fuel efficiency and safety in automotive environments. While many studies claim that the adoption of eco-driving practices, such as eco-driving training programs and in-vehicle feedback to drivers, has the potential to improve fuel efficiency, limited research has integrated safety and eco-driving. Therefore, it is crucial to understand the human factors related theories and practices which will inform the design of an in-vehicle Human Machine Interface (HMI) that could provide real-time driver feedback and consequently improve both fuel efficiency and safety. This paper provides a comprehensive review of the current state of published literature on in-vehicle systems to identify and evaluate the impact of eco-driving and safety feedback systems. This paper also discusses how these factors may conflict with one another and have a negative effect on road safety, while also exploring possible eco-driving practices that could encourage more sustainable, environmentally-conscious and safe driving behavior. The review revealed a lack of comprehensive theoretical research integrating eco-driving and safe driving, and no current available HMI covering both aspects simultaneously. Furthermore, the review identified that some eco-driving in-vehicle systems may enhance fuel efficiency without compromising safety. The review has identified a range of concepts which can be developed to influence driver acceptance of safety and eco-driving systems within the area of HMI. This can promote new research aimed at enhancing our understanding of the relationship between eco-driving and safety from the human factors viewpoint. This provides a foundation for developing innovative, persuasive and acceptable in-vehicle HMI systems to improve fuel efficiency and road safety.

Cultural factors: Understanding culture to design organisation structures and systems to optimise safety

Safety culture is a term with numerous definitions in the literature. Many authors advocate a prescriptive approach to safety culture in which if an organisation has certain levels of externally prescribed systems and structures in place it has a “good safety culture”. Conversely, other researchers suggest an anthropological approach of exploring deep meanings and understandings present within an organisation’s workforce. In a recent published review, the authors presented an alternative view to safety culture, in which the anthropological aspects of safety culture interact with the structures and systems in place within an organisation to result in behavioural patterns. This can be viewed as a human factors approach to safety culture in which, through understanding the specific interactions between the culture of a workforce and external organisational elements, organisational structures and systems can be optimised in order to shape worker behaviour and improve safety. This paper presents findings from a recent investigation of safety culture in the Australian heavy vehicle (transport) industry. Selected results are discussed to explore how understanding culture can provide direction to the optimisation of organisational structures and systems to match worker culture and thus improve safety. Specifically the value placed on personal experience and stories, as well as on both time and money are discussed, and interventions that are suited to these aspects of the culture are discussed. These findings demonstrate the importance of shifting beyond mere prescriptive and interpretive approaches to safety culture and instead to focus on the interaction between cultural and contextual elements to optimise organisational structures and systems.

Left on the side of the road? A review of deterrence-based theoretical developments in road safety

Deterrence-based initiatives form a cornerstone of many road safety countermeasures. This approach is informed by Classical Deterrence Theory, which proposes that individuals will be deterred from committing offences if they fear the perceived consequences of the act, especially the perceived certainty, severity and swiftness of sanctions. While deterrence-based countermeasures have proven effective in reducing a range of illegal driving behaviours known to cause crashes such as speeding and drink driving, the exact level of exposure, and how the process works, remains unknown. As a result the current study involved a systematic review of the literature to identify theoretical advancements within deterrence theory that has informed evidence-based practice. Studies that reported on perceptual deterrence between 1950 and June 2015 were searched in electronic databases including PsychINFO and ScienceDirect, both within road safety and non-road safety fields. This review indicated that scientific efforts to understand deterrence processes for road safety were most intense during the 1970s and 1980s. This era produced competing theories that postulated both legal and non-legal factors can influence offending behaviours. Since this time, little theoretical progression has been made in the road safety arena, apart from Stafford and Warr's (1993) reconceptualisation of deterrence that illuminated the important issue of punishment avoidance. In contrast, the broader field of criminology has continued to advance theoretical knowledge by investigating a range of individual difference-based factors proposed to influence deterrent processes, including: moral inhibition, social bonding, self-control, tendencies to discount the future, etc. However, this scientific knowledge has not been directed towards identifying how to best utilise deterrence mechanisms to improve road safety. This paper will highlight the implications of this lack of progression and provide direction for future research.

Inside the black box of food safety: A qualitative study of ‘non-compliance’ among food businesses

Issue addressed The paper examines the meanings of food safety among food businesses deemed non-compliant and considers the need for an ‘insider perspective’ to inform a more nuanced health promotion practice. Methods In-depth interviews were conducted with 29 food business operators who had been recently deemed ‘non-compliant’ through Council inspection. Result Paradoxically, these ‘non-compliers’ revealed a strong belief in the importance of food safety as well as a desire to comply with the regulations as communicated to them by Environmental Health Officers (EHOs). Conclusions The evidence base of food safety is largely informed by the science of food hazards, yet there is a very important need to illuminate the ‘insider’ experience of food businesses doing food safety on a daily basis. This requires a more socially nuanced appreciation of food businesses beyond the simple dichotomy of compliant/ non-compliant. So what? Armed with a deeper understanding of the social context surrounding food safety practice, it is anticipated that a more balanced, collaborative mode of food safety health promotion could develop which could add to the current signature model of regulation.

Examining signs of driver sleepiness, usage of sleepiness countermeasures and the associations with sleepy driving behaviours and individual factors

The impairing effect from sleepiness is a major contributor to road crashes. The ability of a sleepy driver to perceive their level of sleepiness is an important consideration for road safety as well as the type of sleepiness countermeasure used by drivers as some sleepiness countermeasures are more effective than others. The aims of the current study were to determine the extent that the signs of driver sleepiness were associated with sleepy driving behaviours, as well as determining which individual factors (demographic, work, driving, and sleep-related factors) were associated with using a roadside or in-vehicle sleepiness countermeasure. A sample of 1518 Australian drivers from the Australian State of New South Wales and the neighbouring Australian Capital Territory took part in the study. The participants’ experiences with the signs of sleepiness were reasonably extensive. A number of the early signs of sleepiness (e.g., yawning, frequent eye blinks) were related with continuing to drive while sleepy, with the more advanced signs of sleepiness (e.g., difficulty keeping eyes open, dreamlike state of consciousness) associated with having a sleep-related close call. The individual factors associated with using a roadside sleepiness countermeasure included age (being older), education (tertiary level), difficulties getting to sleep, not continuing to drive while sleepy, and having experienced many signs of sleepiness. The results suggest that these participants have a reasonable awareness and experience with the signs of driver sleepiness. Factors related to previous experiences with sleepiness were associated with implementing a roadside countermeasure. Nonetheless, the high proportions of drivers performing sleepy driving behaviours, suggest that concerted efforts are needed with road safety campaigns regarding the dangers of driving while sleepy.