Safety of OPRA procedure for individuals with upper limb amputation

Surgical implantations of osseointegrated fixations for bone-anchored prosthesis are developing at an unprecedented pace worldwide while initial skepticism in the orthopedic community is slowly fading away. Clearly, this option is becoming accessible to a wide range of individuals with limb loss. [1-18] The team led by Dr Rickard Branemark has previously published a number of landmark articles focusing on the benefits and safety of the OPRA fixation mainly for individual with lower limb loss, particularly those with transfemoral amputation. [1-3, 19-32] However, similar information is lacking for those with upper limb amputation. This team is once again taking a leading role by sharing a retrospective study focusing on the implant survival, adverse events, implant stability, and bone remodelling for 18 individuals with transhumeral amputation over a 5-year post-operative period. Therefore, a comprehensive analysis of the safety of the procedure is accessible for the first time. In essence, the results showed an implant survival rate of 83% and 80% at 2 and 5 year follow ups, respectively. The most frequent adverse events were superficial skin infections that occurred for 28% (5) participants while the least frequent was deep bone infection that happened only once. More importantly, 38% of complications due to infections were effectively managed with nonoperative treatments (e.g., revision of skin penetration site, local cleaning, antibiotics, restriction of soft tissue mobility). Implant stability and bone remodelling were satisfactory. Clearly, this study provided better understanding of the safety of the OPRA surgical and rehabilitation procedure for individuals with upper limb amputation while establishing standards and benchmark data for future studies. However, strong evidences of the benefits are yet to be demonstrated. However, increase in health related quality of life and functional outcomes (e.g., range of movement) are likely. Altogether, the team of authors are providing further evidence that bone-anchored attachment is definitely a promising alternative to socket prostheses.

Excitation of bound plasmons along nanoscale stripe waveguides: A comparison of end and grating coupling techniques

In this paper we excite bound long range stripe plasmon modes with a highly focused laser beam. We demonstrate highly confined plasmons propagating along a 50 μm long silver stripe 750 nm wide and 30 nm thick. Two excitation techniques were studied: focusing the laser spot onto the waveguide end and focusing the laser spot onto a silver grating. By comparing the intensity of the out-coupling photons at the end of the stripe for both grating and end excitation we are able to show that gratings provide an increase of a factor of two in the output intensity and thus out-coupling of plasmons excited by this technique are easier to detect. Authors expect that the outcome of this paper will prove beneficial for the development of passive nano-optical devices based on stripe waveguides, by providing insight into the different excitation techniques available and the advantages of each technique.

Duty and control in intermediary copyright liability: An Australian perspective

In the internet age, copyright owners are increasingly looking to online intermediaries to take steps to prevent copyright infringement. Sometimes these intermediaries are closely tied to the acts of infringement; sometimes – as in the case of ISPs – they are not. In 2012, the Australian High Court decided the Roadshow Films v iiNet case, in which it held that an Australian ISP was not liable under copyright’s authorization doctrine, which asks whether the intermediary has sanctioned, approved or countenanced the infringement. The Australian Copyright Act 1968 directs a court to consider, in these situations, whether the intermediary had the power to prevent the infringement and whether it took any reasonable steps to prevent or avoid the infringement. It is generally not difficult for a court to find the power to prevent infringement – power to prevent can include an unrefined technical ability to disconnect users from the copyright source, such as an ISP terminating users’ internet accounts. In the iiNet case, the High Court eschewed this broad approach in favor of focusing on a notion of control that was influenced by principles of tort law. In tort, when a plaintiff asserts that a defendant should be liable for failing to act to prevent harm caused to the plaintiff by a third party, there is a heavy burden on the plaintiff to show that the defendant had a duty to act. The duty must be clear and specific, and will often hinge on the degree of control that the defendant was able to exercise over the third party. Control in these circumstances relates directly to control over the third party’s actions in inflicting the harm. Thus, in iiNet’s case, the control would need to be directed to the third party’s infringing use of BitTorrent; control over a person’s ability to access the internet is too imprecise. Further, when considering omissions to act, tort law differentiates between the ability to control and the ability to hinder. The ability to control may establish a duty to act, and the court will then look to small measures taken to prevent the harm to determine whether these satisfy the duty. But the ability to hinder will not suffice to establish liability in the absence of control. This article argues that an inquiry grounded in control as defined in tort law would provide a more principled framework for assessing the liability of passive intermediaries in copyright. In particular, it would set a higher, more stable benchmark for determining the copyright liability of passive intermediaries, based on the degree of actual, direct control that the intermediary can exercise over the infringing actions of its users. This approach would provide greater clarity and consistency than has existed to date in this area of copyright law in Australia.

3D reconfigurable autopilot flight system for both general aviation and unmanned aerial systems

This research project investigated and designed a modular architecture for a 3D Reconfigurable Autopilot Flight System that could be used to control actuators in both manned and unmanned aircraft. The system is based on a CAN Bus interface and allows seamless control of different types of actuators. During the course of the research the differences and similarities of autopilots for fixed-wing general aviation aircraft and unmanned aircraft were analysed focusing on the actuator interfaces. This project suggests that software and hardware used in commercial-of-the-shelf avionics could be used in manned and unmanned aviation.

Basic Religious Charities

Just over 44,000 registered charities filed their first Annual Information Statement (AIS) return with the Australian Charities and Not-for-profits Commission (ACNC) before the end of October 2014. Of these, 10,918 charities self-identified as Basic Religious Charities (BRCs). These are usually, but not always, unincorporated religious congregations which receive no or little government funding. Having a central agency for reporting, in the form of the ACNC, having access to information supplied in the AIS by registered organisations has allowed access to new measures of charities and their activities. In September 2014 the ACNC, in conjunction with Curtin University Not-for-profit Initiative, released a high-level report on the first AIS, and the data were also made available digitally through the Australian Government Data Repository. This factsheet builds on that report by focusing on BRCs.

Food futures: Three provocations to challenge HCI interventions

Our contemporary concerns about food range from food security to agricultural sustainability to getting dinner on the table for family and friends. This book investigates food issues as they intersect with participatory Internet culture--blogs, wikis, online photo- and video-sharing platforms, and social networks in efforts to bring about a healthy, socially inclusive, and sustainable food future. Focusing on our urban environments provisioned with digital and network capacities, and drawing on such "bottom-up" sociotechnical trends as DIY and open source, the chapters describe engagements with food and technology that engender (re-)creative interactions.

A robot application to marine vessel inspection

Seagoing vessels have to undergo regular inspections, which are currently performed manually by ship surveyors. The main cost factor in a ship inspection is to provide access to the different areas of the ship, since the surveyor has to be close to the inspected parts, usually within arm's reach, either to perform a visual analysis or to take thickness measurements. The access to the structural elements in cargo holds, e.g., bulkheads, is normally provided by staging or by 'cherry-picking' cranes. To make ship inspections safer and more cost-efficient, we have introduced new inspection methods, tools, and systems, which have been evaluated in field trials, particularly focusing on cargo holds. More precisely, two magnetic climbing robots and a micro-aerial vehicle, which are able to assist the surveyor during the inspection, are introduced. Since localization of inspection data is mandatory for the surveyor, we also introduce an external localization system that has been verified in field trials, using a climbing inspection robot. Furthermore, the inspection data collected by the robotic systems are organized and handled by a spatial content management system that enables us to compare the inspection data of one survey with those from another, as well as to document the ship inspection when the robot team is used. Image-based defect detection is addressed by proposing an integrated solution for detecting corrosion and cracks. The systems' performance is reported, as well as conclusions on their usability, all in accordance with the output of field trials performed onboard two different vessels under real inspection conditions.

Applying digital product memories in industrial production

Industrial production and supply chains face increased demands for mass customization and tightening regulations on the traceability of goods, leading to higher requirements concerning flexibility, adaptability, and transparency of processes. Technologies for the ’Internet of Things' such as smart products and semantic representations pave the way for future factories and supply chains to fulfill these challenging market demands. In this chapter a backend-independent approach for information exchange in open-loop production processes based on Digital Product Memories DPMs is presented. By storing order-related data directly on the item, relevant lifecycle information is attached to the product itself. In this way, information handover between several stages of the value chain with focus on the manufacturing phase of a product has been realized. In order to report best practices regarding the application of DPM in the domain of industrial production, system prototype implementations focusing on the use case of producing and handling a smart drug case are illustrated.

Unlocking the learning potential of incarcerated Indigenous and low SES young people; Mathematics outcomes for future success: a discussion paper

This presentation provides a beginning discussion about what the literature reports about incarcerated young people. Incarcerated Indigenous and low SES young people typically have very low literacy and mathematics skills which precludes them from future education and or employment opportunities, thus continuing the cycle of disadvantage, exclusion and despair(Payne, 2007). Being locked out of learning, they are stuck in a cycle of underachievement, a scenario which contributes to unacceptably high levels of recidivism(ACER, 2014). Success at education is considered an important protective factor against delinquent behaviours such as offending, substance abuse and truancy. Youth education and training centres provide educational opportunities for the incarcerated Indigenous youth but achievement continues to be lower than expected, particularly in mathematics. This presentation provides an introductory literature review focusing on incarcerated young people and education. It is also the preliminary writing for a small pilot project currently being conducted in one Youth Education and Training Centre in Australia.

Toward the multilevel older person's transportation and road safety model: A new perspective on the role of demographic, functional, and psychosocial factors

Objectives Self-regulation refers to the practice of using self-imposed restrictions to protect oneself from situations that are, or are perceived to be, unsafe. Within the driving context, self-regulation refers the compensatory practices that some older adults adopt to restrict their driving to situations in which they feel safe. However, the way in which demographic, functional, and psychosocial factors, and the interactions between these factors, influence older adults’ driving self-regulation is not well understood. Improving this understanding could lead to new ways of considering the mobility concerns faced by older drivers. Method A systematic review of the current literature was conducted to explore this issue. Twenty-nine empirical studies investigating the factors associated with older adults’ self-regulatory driving behaviors were examined. Results The review findings were used to construct the Multilevel Older Persons Transportation and Road Safety (MOTRS) model. The MOTRS model proposes that individual and environmental factors such as age, gender, and the availability of alternative transportation predict older adults’ practice of driving-related self-regulation. However, these variables influence self-regulation through psychosocial variables such as driving confidence, affective attitude, and instrumental attitude toward driving. Discussions The MOTRS model extends previous attempts to model older adults’ driving by focusing on a novel target, driving self-regulation, and by including a wider range of predictors identified on the basis of the systematic literature review. This focus enables consideration of broader mobility issues and may inform new strategies to support the mobility of older adults.

Structural quality indicators to support quality of care for older people with cognitive impairment in emergency departments

Objectives The purpose of this study was to identify the structural quality of care domains and to establish a set of structural quality indicators (SQIs) for the assessment of care of older people with cognitive impairment in emergency departments (EDs). Methods A structured approach to SQI development was undertaken including: 1) a comprehensive search of peer-reviewed and gray literature focusing on identification of evidence-based interventions targeting structure of care of older patients with cognitive impairment and existing SQIs; 2) a consultative process engaging experts in the care of older people and epidemiologic methods (i.e., advisory panel) leading to development of a draft set of SQIs; 3) field testing of drafted SQIs in eight EDs, leading to refinement of the SQI set, and; 4) an independent voting process among the panelists for SQI inclusion in a final set, using preestablished inclusion and exclusion criteria. Results At the conclusion of the process, five SQIs targeting the management of older ED patients with cognitive impairment were developed: 1) the ED has a policy outlining the management of older people with cognitive impairment during the ED episode of care; 2) the ED has a policy outlining issues relevant to carers of older people with cognitive impairment, encompassing the need to include the (family) carer in the ED episode of care; 3) the ED has a policy outlining the assessment and management of behavioral symptoms, with specific reference to older people with cognitive impairment; 4) the ED has a policy outlining delirium prevention strategies, including the assessment of patients' delirium risk factors, and; 5) the ED has a policy outlining pain assessment and management for older people with cognitive impairment. Conclusions This article presents a set of SQIs for the evaluation of performance in caring for older people with cognitive impairment in EDs.

Deriving information systems innovation execution mechanisms

Despite a wealth of studies focusing on innovation, types of innovations and their outcomes, the process of innovation has largely been under studied. In 2010, Swanson calls for researchers to address the ‘innovation process black box’, to better understand how IT innovation potential can be exploited upon. This study derives and instantiates three unique and mutually exclusive innovation execution mechanisms: Continual, Progressive and Plug and Play. The innovation execution mechanisms of this study are developed with reference to Swanson (1994) Information Systems innovation types.

Public and private mitigation for natural disasters in Japan

An increasing number of studies analyze the relationship between natural disaster damage and income levels, but they do not consider the distinction between public and private disaster mitigation. This paper empirically distinguishes these two types of mitigation using Japanese prefectural panel data from 1975 to 2007. Our results show that public mitigation rather than private mitigation has contributed to mitigating the total damage resulting from natural disasters. Our estimation of cost-benefit ratios for each prefecture confirms that the mitigation efforts of urban prefectures are less effective than those of rural prefectures in focusing on both large and frequent/small disasters. Hence, urban prefectures need to reassess their public mitigation measures. Furthermore, to lessen the damage resulting from extreme catastrophes, policy makers are required to invest in improved mitigation infrastructures when faced with a high probability of disasters.

Increasing research data management capability within your university

A Powerpoint presentation on increasing research data management capability within your university, presented from the university library perspective, and focusing on collaborations with university partners to develop and implement university wide data management services and infrastructure.

Gendering occupations: Persistence and resistance of gender presumptions about members of particular healthcare professions

In spite of increasing gender diversity in employment roles, presumptions persist about the gender of people employed in particular occupations. Focusing on healthcare data collected in Australia and the United Kingdom within the past decade, we use Conversation Analysis (CA) to identify how presumptions about gender are displayed within social interaction through the use of gender-specific pronouns. We show how gender-specific pronouns are asymmetrically selected on the basis of a referent’s occupations, with gender-unspecified members of traditionally male occupations (e.g. doctors) referred to with masculine pronouns and gender-unspecified members of traditionally female occupations (e.g. nurses) referred to with feminine pronouns. We also explore ways people avoid making such presumptions. Our analysis therefore reveals a state of flux in contemporary social life, with instances in which gender presumptions persist as well as attempts to employ person references that reflect contemporary social dynamics.