Development of the response coefficient-root function method for the transient vibration serviceability design of flat concrete floors

The vibration serviceability limit state is an important design consideration for two-way, suspended concrete floors that is not always well understood by many practicing structural engineers. Although the field of floor vibration has been extensively developed, at present there are no convenient design tools that deal with this problem. Results from this research have enabled the development of a much-needed, new method for assessing the vibration serviceability of flat, suspended concrete floors in buildings. This new method has been named, the Response Coefficient-Root Function (RCRF) method. Full-scale, laboratory tests have been conducted on a post-tensioned floor specimen at Queensland University of Technology’s structural laboratory. Special support brackets were fabricated to perform as frictionless, pinned connections at the corners of the specimen. A series of static and dynamic tests were performed in the laboratory to obtain basic material and dynamic properties of the specimen. Finite-element-models have been calibrated against data collected from laboratory experiments. Computational finite-element-analysis has been extended to investigate a variety of floor configurations. Field measurements of floors in existing buildings are in good agreement with computational studies. Results from this parametric investigation have led to the development of new approach for predicting the design frequencies and accelerations of flat, concrete floor structures. The RCRF method is convenient tool to assist structural engineers in the design for the vibration serviceability limit-state of in-situ concrete floor systems.

Innovation, interaction, and inclusion : heritage luxury brands in collusion with the consumer

Many luxury heritage brands operate on the misconception that heritage is interchangeable with history rather than representative of the emotional response they originally developed in their customer. This idea of heritage as static history inhibits innovation, prevents dynamic renewal and impedes their ability to redefine, strengthen and position their brand in current and emerging marketplaces. This paper examines a number of heritage luxury brands that have successfully identified the original emotional responses they developed in their customers and, through innovative approaches in design, marketing, branding and distribution evoke these responses in contemporary consumers. Using heritage and innovation hand-in-hand, these brands have continued to grow and develop a vision of heritage that incorporates both historical and contemporary ideas to meet emerging customer needs. While what constitutes a ‘luxury’ item is constantly challenged in this era of accessible luxury products, up-scaling and aspirational spending, this paper sees consumers’ emotional needs as the key element in defining the concept of luxury. These emotional qualities consistently remain relevant due to their ability to enhance a positive sense of identity for the brand user. Luxury is about the ‘experience’ not just the product providing the consumer with a sense of enhanced status or identity through invoked feelings of exclusivity, authenticity, quality, uniqueness and culture. This paper will analyse luxury heritage brands that have successfully combined these emotional values with those of their ‘heritage’ to create an aura of authenticity and nostalgia that appeals to contemporary consumers. Like luxury, the line where clothing becomes fashion is blurred in the contemporary fashion industry; however, consumer emotion again plays an important role. For example, clothing becomes ‘fashion’ for consumers when it affects their self perception rather than fulfilling basic functions of shelter and protection. Successful luxury heritage brands can enhance consumers’ sense of self by involving them in the ‘experience’ and ‘personality’ of the brand so they see it as a reflection of their own exclusiveness, authentic uniqueness, belonging and cultural value. Innovation is a valuable tool for heritage luxury brands to successfully generate these desired emotional responses and meet the evolving needs of contemporary consumers. While traditionally fashion has been a monologue from brand to consumer, new technology has given consumers a voice to engage brands in a conversation to express their evolving needs, ideas and feedback. As a result, in this consumer-empowered era of information sharing, this paper defines innovation as the ability of heritage luxury brands to develop new design and branding strategies in response to this consumer feedback while retaining the emotional core values of their heritage. This paper analyses how luxury heritage brands can effectively position themselves in the contemporary marketplace by separating heritage from history to incorporate innovative strategies that will appeal to consumer needs of today and tomorrow.

Luxury fashion : the significance of luxury fashion goods for sustainable fashion design

This paper extends the work of “Luxury fashion : the role of innovation as a key contributing factor in the development of luxury fashion goods and sustainable fashion design” (Finn, 2011). The discussion here begins with the observation that post consumer textile waste remains a major obstacle in realising a model of sustainable fashion design and production however, amongst the millions of tonnes of textile and clothing sent to landfill each year there is little evidence of authentic luxury branded goods ending life as landfill. The sustainable fashion movement often support approaches such as fashion up-cycle, re-cycle and cradle to cradle solutions. This paper argues that the priority should be to break the cycle of consumerism as an immediate intervention in ongoing unsustainable (and in some cases unethical) practices involved in the production of fashion goods. The connections between maker and consumer are explored through object analysis and the findings raise questions of the separation between luxury fashion goods and fashion goods that bear luxury fashion branding. This paper suggests that unethical and subversive exploitation of these connections may be used to promote increased consumerism while at the same time purporting exclusivity and superior craftsmanship.

The lived experience of being a sole mother in Taiwan

Aim: To explore the lived experience of being a sole mother in Taiwan Background: The number of sole mothers in Taiwan has increased by 55 % in the last decade due to changes in the social and economic status of women (e.g. earlier divorce, the development of national policies for the protection of women, the rise of feminism, and changing work practices which have seen an increase in the number of women in the workforce) (Taiwan Department of Statistics, 2010). Issues confronting sole mothers as part of daily living involve inability to cope with daily life stressors, little social support, experiencing feelings of helplessness and hopelessness, and lack of self-confidence to assume responsibility for the physical and mental health needs of themselves and their children (Cairney, 2007; Loxton, Mooney & Young, 2006; Samuels-Dennis, 2006; Waldron et al., 1996). Although there have been a number of studies conducted concerning what it means to be a sole mother, few Taiwanese studies have been undertaken. In light of the absence of research on this topic from a Taiwanese perspective, this study was undertaken. Design:A descriptive phenomenological approach was used for this study. Methods: In-depth audio-taped interviews were conducted with 15 sole Taiwanese mothers. The audiotapes were later transcribed, translated into English, and then back translated into Chinese to ensure accuracy of participants‘ information. Colaizzi‘s phenomenological approach to analysis with one additional step (eight steps in all) informed the analytical process. Findings: The process of analysis identified six central themes: 1. Enduring the burdensome, 2. Survival means living day-by-day, 3. Living in the shadows of insomnia, depression and suicidal thoughts, 4. Living with rejection and social isolation, 5. Living with uncertainty, and 6. Transcending difficult times through being resilient. Conclusion: For the participants of this study, the lived world of Taiwanese sole mothers was replete with daily difficulties marked by isolation, loneliness, social disapproval and rejection. Feelings of sadness and dejection were their daily companions. However, amid their myriad hardships, the participants found strength and solace in their children and close friends. Rather than succumb to the pressures of being a sole mother, the participants forged new paths spurred on by their own hopes and dreams for a better future. The findings of this study have the potential to make significant contributions to extant knowledge concerning the lived experiences of sole mothers in Taiwan.

Improving team dynamics and innovation : the “Aspect Design” approach applied to interaction design

Interaction Design is a fast developing branch of Industrial Design. The availability of cheap microprocessors and sensor electronics allow interactions between people and products that were until recently impossible. This has added additional layers of complexity to the design process. Novice designers find it difficult to effectively juggle these complexities and typically tend to focus on one aspect at a time. They also tend to take a linear, step-by-step approach to the design process in contrast to expert designers who pursue “parallel lines of thought” whilst simultaneously co-evolving both problem and solution. (Lawson, 1993) This paper explores an approach that encourages designers (in this case novice designers) to take a parallel rather than linear approach to the design process. It also addresses the problem of social loafing that tends to occur in team activities.

Design of a preliminary error impact analysis model for spatial safety assessment of earthmoving operations

Regardless of technology benefits, safety planners still face difficulties explaining errors related to the use of different technologies and evaluating how the errors impact the performance of safety decision making. This paper presents a preliminary error impact analysis testbed to model object identification and tracking errors caused by image-based devices and algorithms and to analyze the impact of the errors for spatial safety assessment of earthmoving and surface mining activities. More specifically, this research designed a testbed to model workspaces for earthmoving operations, to simulate safety-related violations, and to apply different object identification and tracking errors on the data collected and processed for spatial safety assessment. Three different cases were analyzed based on actual earthmoving operations conducted at a limestone quarry. Using the testbed, the impacts of the errors were investigated for the safety planning purpose.

Design for eco-services. Part A - Environmental Services

Without the virtually free services of nature like clean air and water, humans would not last long. Natural systems can be incorporated in existing urban structures or spaces to add public amenity, mitigate the heat island effect, reduce pollution, add oxygen, and ensure water, electricity and food security in urban areas. Th ere are many eco-solutions that could radically reduce resource consumption and pollution and even provide surplus ecosystem services in the built environment at little or no operational cost, if adequately supported by design. Th is paper is the fi rst of a two part paper that explains what eco-services are, then provides examples of how design can generate natural as well as social capital. Using examples of actual and notional solutions, both papers set out to challenge designers to ‘think again’, and invent ways of creating net positive environmental gains through built environment design.

Design for eco-services. Part B - Building Services

Without the virtually free services of nature like clean air and water, humans would not last long. Natural systems can be incorporated in existing urban structures or spaces to add public amenity, mitigate the heat island eff ect, reduce pollution, add oxygen, and ensure water, electricity and food security in urban areas. Th ere are many eco-solutions that could radically reduce resource consumption and pollution and even provide surplus ecosystem services in the built environment at little or no operational cost, if adequately supported by design. Th is is the second part of a two part paper that explains what eco-services are, then provides examples of how design can generate natural as well as social capital. Using examples of actual and notional solutions, both papers set out to challenge designers to ‘think again’, and invent ways of creating net positive environmental gains through built environment design.

Control and protection of a microgrid connected to utility through back-to-back converters

This paper discusses the control and protection of a microgrid that is connected to utility through back-to-back converters. The back-to-back converter connection facilitates bidirectional power flow between the utility and the microgrid. These converters can operate in two different modes–one in which a fixed amount of power is drawn from the utility and the other in which the microgrid power shortfall is supplied by the utility. In the case of a fault in the utility or microgrid side, the protection system should act not only to clear the fault but also to block the back-to-back converters such that its dc bus voltage does not fall during fault. Furthermore, a converter internal mechanism prevents it from supplying high current during a fault and this complicates the operation of a protection system. To overcome this, an admittance based relay scheme is proposed, which has an inverse time characteristic based on measured admittance of the line. The proposed protection and control schemes are able to ensure reliable operation of the microgrid.

Locating child protection in preservice teacher education

A recent report delivered by the Australian Centre for Child Protection has highlighted the need for empirical evidence of effective pedagogies for supporting teaching and learning of child protection content in Australian teacher education programs (Arnold & Maio-Taddeo, 2007). This paper advances this call by presenting case study accounts of different approaches to teaching child protection content in University-based teacher education programs across three Australian States. These different cases provide a basis for understanding existing strategies as an important precursor to improving practice. Although preschool, primary and secondary schools have been involved in efforts to protect children from abuse and neglect since the 1970s, teacher education programs, including preservice and inservice programs, have been slow to align their work with child protection agendas. This paper opens a long-overdue discussion about the extent and nature of child protection content in teacher education and proposes strategies for translating research into practice.

Queensland College of Teachers annual lecture 2010 : child protection

Teachers have a crucial role as “sentinels” for children who have been abused or neglected. This professional development session will provide a framework for understanding the types, incidence and causes of child abuse and neglect, and teachers’ role in reporting suspected cases. The session will provide participants with knowledge and skills to enable them to identify warning signs and indicators of child abuse and neglect, know the basis of their duties to report suspected cases of abuse and neglect, and respond to the needs of abused and neglected children at school. The presentation will focus on: • the reasons why child abuse and neglect can occur; • the different types of child abuse and neglect and their effects on children; • the warning signs and indicators of physical abuse, emotional abuse, sexual abuse and neglect; • applying knowledge of indicators to make judgements about risk of harm; • responding to indications of risk of harm, including complying with legislative and policy-based duties to report suspected child abuse and neglect.

'Attaching' warning statements by facsimile consumer protection prevails!

Section 366 of the Property Agents and Motor Dealers Act 2000 (Qld) (‘PAMDA’) mandates that all contracts for the sale of residential property in Queensland (other than contracts formed on a sale by auction) have a warning statement ‘attached’ as the first or top sheet. Alternative judicial views have emerged concerning the possibility of attaching a warning statement to a contract sent by facsimile. In recognition of the consumer protection nature of the legislation, in MP Management (Aust) Pty Ltd v Churven [2002] QSC 320 Muir J favoured a restrictive view of the word ‘attached’ requiring physical joinder of the warning statement to the relevant contract. In contrast, in MNM Developments Pty Ltd v Gerrard [2005] QDC 10 Newton DCJ opined that the requirements of the PAMDA could be met where the warning statement preceded the contract of sale in a facsimile transmission sent in one continuous stream. Newton DCJ considered that this broader approach promoted commercial convenience. In an appeal from the decision of Newton DCJ, in MNM Developments Pty Ltd v Gerrard [2005] QCA 230 a majority of the Queensland Court of Appeal has held that the restrictive view propounded by Muir J is correct. Notwithstanding possible commercial inconvenience, it is not possible for a warning statement to be attached to a contract sent by facsimile.

Evaluation of financial incentives as a quality improvement strategy in the public hospital context : clinician attitudes, design variables, and economic costs

In 2008, a three-year pilot ‘pay for performance’ (P4P) program, known as ‘Clinical Practice Improvement Payment’ (CPIP) was introduced into Queensland Health (QHealth). QHealth is a large public health sector provider of acute, community, and public health services in Queensland, Australia. The organisation has recently embarked on a significant reform agenda including a review of existing funding arrangements (Duckett et al., 2008). Partly in response to this reform agenda, a casemix funding model has been implemented to reconnect health care funding with outcomes. CPIP was conceptualised as a performance-based scheme that rewarded quality with financial incentives. This is the first time such a scheme has been implemented into the public health sector in Australia with a focus on rewarding quality, and it is unique in that it has a large state-wide focus and includes 15 Districts. CPIP initially targeted five acute and community clinical areas including Mental Health, Discharge Medication, Emergency Department, Chronic Obstructive Pulmonary Disease, and Stroke. The CPIP scheme was designed around key concepts including the identification of clinical indicators that met the set criteria of: high disease burden, a well defined single diagnostic group or intervention, significant variations in clinical outcomes and/or practices, a good evidence, and clinician control and support (Ward, Daniels, Walker & Duckett, 2007). This evaluative research targeted Phase One of implementation of the CPIP scheme from January 2008 to March 2009. A formative evaluation utilising a mixed methodology and complementarity analysis was undertaken. The research involved three research questions and aimed to determine the knowledge, understanding, and attitudes of clinicians; identify improvements to the design, administration, and monitoring of CPIP; and determine the financial and economic costs of the scheme. Three key studies were undertaken to ascertain responses to the key research questions. Firstly, a survey of clinicians was undertaken to examine levels of knowledge and understanding and their attitudes to the scheme. Secondly, the study sought to apply Statistical Process Control (SPC) to the process indicators to assess if this enhanced the scheme and a third study examined a simple economic cost analysis. The CPIP Survey of clinicians elicited 192 clinician respondents. Over 70% of these respondents were supportive of the continuation of the CPIP scheme. This finding was also supported by the results of a quantitative altitude survey that identified positive attitudes in 6 of the 7 domains-including impact, awareness and understanding and clinical relevance, all being scored positive across the combined respondent group. SPC as a trending tool may play an important role in the early identification of indicator weakness for the CPIP scheme. This evaluative research study supports a previously identified need in the literature for a phased introduction of Pay for Performance (P4P) type programs. It further highlights the value of undertaking a formal risk assessment of clinician, management, and systemic levels of literacy and competency with measurement and monitoring of quality prior to a phased implementation. This phasing can then be guided by a P4P Design Variable Matrix which provides a selection of program design options such as indicator target and payment mechanisms. It became evident that a clear process is required to standardise how clinical indicators evolve over time and direct movement towards more rigorous ‘pay for performance’ targets and the development of an optimal funding model. Use of this matrix will enable the scheme to mature and build the literacy and competency of clinicians and the organisation as implementation progresses. Furthermore, the research identified that CPIP created a spotlight on clinical indicators and incentive payments of over five million from a potential ten million was secured across the five clinical areas in the first 15 months of the scheme. This indicates that quality was rewarded in the new QHealth funding model, and despite issues being identified with the payment mechanism, funding was distributed. The economic model used identified a relative low cost of reporting (under $8,000) as opposed to funds secured of over $300,000 for mental health as an example. Movement to a full cost effectiveness study of CPIP is supported. Overall the introduction of the CPIP scheme into QHealth has been a positive and effective strategy for engaging clinicians in quality and has been the catalyst for the identification and monitoring of valuable clinical process indicators. This research has highlighted that clinicians are supportive of the scheme in general; however, there are some significant risks that include the functioning of the CPIP payment mechanism. Given clinician support for the use of a pay–for-performance methodology in QHealth, the CPIP scheme has the potential to be a powerful addition to a multi-faceted suite of quality improvement initiatives within QHealth.