Biological monitoring of occupational exposure to polycyclic aromatic hydrocarbons in prebake smelting

In 1984, the International Agency for Research on Cancer determined that working in the primary aluminium production process was associated with exposure to certain polycyclic aromatic hydrocarbons (PAHs) that are probably carcinogenic to humans. Key sources of PAH exposure within the occupational environment of a prebake aluminium smelter are processes associated with use of coal-tar pitch. Despite the potential for exposure via inhalation, ingestion and dermal adsorption, to date occupational exposure limits exist only for airborne contaminants. This study, based at a prebake aluminium smelter in Queensland, Australia, compares exposures of workers who came in contact with PAHs from coal-tar pitch in the smelter’s anode plant (n = 69) and cell-reconstruction area (n = 28), and a non-production control group (n = 17). Literature relevant to PAH exposures in industry and methods of monitoring and assessing occupational hazards associated with these compounds are reviewed, and methods relevant to PAH exposure are discussed in the context of the study site. The study utilises air monitoring of PAHs to quantify exposure via the inhalation route and biological monitoring of 1-hydroxypyrene (1-OHP) in urine of workers to assess total body burden from all routes of entry. Exposures determined for similar exposure groups, sampled over three years, are compared with published occupational PAH exposure limits and/or guidelines. Results of paired personal air monitoring samples and samples collected for 1-OHP in urine monitoring do not correlate. Predictive ability of the benzene-soluble fraction (BSF) in personal air monitoring in relation to the 1-OHP levels in urine is poor (adjusted R2 < 1%) even after adjustment for potential confounders of smoking status and use of personal protective equipment. For static air BSF levels in the anode plant, the median was 0.023 mg/m3 (range 0.002–0.250), almost twice as high as in the cell-reconstruction area (median = 0.013 mg/m3, range 0.003–0.154). In contrast, median BSF personal exposure in the anode plant was 0.036 mg/m3 (range 0.003–0.563), significantly lower than the median measured in the reconstruction area (0.054 mg/m3, range 0.003–0.371) (p = 0.041). The observation that median 1-OHP levels in urine were significantly higher in the anode plant than in the reconstruction area (6.62 µmol/mol creatinine, range 0.09–33.44 and 0.17 µmol/mol creatinine, range 0.001–2.47, respectively) parallels the static air measurements of BSF rather than the personal air monitoring results (p < 0.001). Results of air measurements and biological monitoring show that tasks associated with paste mixing and anode forming in the forming area of the anode plant resulted in higher PAH exposure than tasks in the non-forming areas; median 1-OHP levels in urine from workers in the forming area (14.20 µmol/mol creatinine, range 2.02–33.44) were almost four times higher than those obtained from workers in the non-forming area (4.11 µmol/mol creatinine, range 0.09–26.99; p < 0.001). Results justify use of biological monitoring as an important adjunct to existing measures of PAH exposure in the aluminium industry. Although monitoring of 1-OHP in urine may not be an accurate measure of biological effect on an individual, it is a better indicator of total PAH exposure than BSF in air. In January 2005, interim study results prompted a plant management decision to modify control measures to reduce skin exposure. Comparison of 1-OHP in urine from workers pre- and post-modifications showed substantial downward trends. Exposure via the dermal route was identified as a contributor to overall dose. Reduction in 1-OHP urine concentrations achieved by reducing skin exposure demonstrate the importance of exposure via this alternative pathway. Finally, control measures are recommended to ameliorate risk associated with PAH exposure in the primary aluminium production process, and suggestions for future research include development of methods capable of more specifically monitoring carcinogenic constituents of PAH mixtures, such as benzo[a]pyrene.

Safety in occupational driving : development of a driver behaviour scale for the workplace context

International statistics indicate that occupational, or work-related driving, crashes are the most common cause of workplace injury, death, and absence from work. The majority of research examining unsafe driver behavior in the workplace has relied on general road safety questionnaires. However, past research has failed to consider the organizational context in the use of these questionnaires, and as such, there is ambiguity in the dimensions constituting occupational driving. Using a theoretical model developed by Hockey (1993, 1997), this article proposes and validates a new scale of occupational driver behavior. This scale incorporates four dimensions of driver behavior that are influenced by demanding workplace conditions; speeding, rule violation, inattention, and driving while tired. Following a content validation process, three samples of occupational drivers in Australia were used to assess the scale. Data from the first sample (n=145) were used to reduce the number of scale items and provide an assessment of the factorial validity of the scale. Data from the second sample (n=645) were then used to confirm the factor structure and psychometric properties of the scale including reliability and construct validity. Finally, data from the third sample (n=248) were used to establish criterion validity. The results indicated that the scale is a reliable and valid measure of occupational driver behavior.

The influence of safety ownership on occupational road safety outcomes

Questionnaires and interviews were conducted with employees and senior managers from three Australian organisations to explore the relationship between perceived managerial ownership of safety responsibilities and occupational road safety. It was found that the perceived authority of the person primarily responsible for managing road risks and perceived shared ownership of safety tasks were both significant independent predictors of safer driving behaviours. It was identified that the position of the person accepting primary risk management responsibilities was typically a member of the OHS team and typically in a management position. The extent that ownership was shared across members within the researched organisations varied, with personnel from OHS and fleet management typically accepting partial ownership of managing occupational road risks. Based on the findings, several recommendations are made to assist practitioners in managing occupational road risks.

Occupational mobility in Queensland’s aged care, automotive and civil construction sectors

Current trends in workforce development indicate the movement of workers within and across occupations to be the norm. In 2009, only one in three vocational education and training (VET) graduates in Australia ended up working in an occupation for which they were trained. This implies that VET enhances the employability of its graduates by equipping them with the knowledge and competencies to work in different occupations and sectors. This paper presents findings from a Government-funded study that examined the occupational mobility of selected associate professional and trades occupations within the Aged Care, Automotive and Civil Construction sectors in Queensland. The study surveyed enrolled nurses and related workers, motor mechanics and civil construction workers to analyse their patterns of occupational mobility, future work intentions, reasons for taking and leaving work, and the factors influencing them to leave or remain in their occupations. This paper also discusses the implications of findings for the training of workers in these sectors and more generally.

Assigning metabolic equivalent (MET) values to the 2002 Census Occupational Classification System

Background: The Current Population Survey (CPS) and the American Time Use Survey (ATUS) use the 2002 census occupation system to classify workers into 509 separate occupations arranged into 22 major occupational categories. Methods: We describe the methods and rationale for assigning detailed MET estimates to occupations and present population estimates (comparing outputs generated by analysis of previously published summary MET estimates to the detailed MET estimates) of intensities of occupational activity using the 2003 ATUS data comprised of 20,720 respondents, 5,323 (2,917 males and 2,406 females) of whom reported working 6+ hours at their primary occupation on their assigned reporting day. Results: Analysis using the summary MET estimates resulted in 4% more workers in sedentary occupations, 6% more in light, 7% less in moderate, and 3% less in vigorous compared to using the detailed MET estimates. The detailed estimates are more sensitive to identifying individuals who do any occupational activity that is moderate or vigorous in intensity resulting in fewer workers in sedentary and light intensity occupations. Conclusions: Since CPS/ATUS regularly captures occupation data it will be possible to track prevalence of the different intensity levels of occupations. Updates will be required with inevitable adjustments to future occupational classification systems.

Occupational health nurses’ roles, credentials, and continuing education in Ontario, Canada

The role of the occupational health nurse is broad and includes health care provider, manager/coordinator, educator/advisor, and case manager and consultant, depending on the type of industry and the country in which the nurse practices. Regardless of the type of role, the occupational health nurse must participate in continuing nursing education (CNE) activities. This study describes the roles, credentials, and number of CNE activities undertaken by occupational health nurses working in Ontario, Canada. Using a non-experimental descriptive design, a questionnaire was mailed to all practicing occupational health nurses who are members (n = 900) of a local nursing association. Three hundred fifty-four questionnaires were returned. Nurses reported a variety of roles in the following categories: case management, health promotion, policy development, infection control/travel health, ergonomics, education, research, health and safety, direct care, consultation, disaster preparedness, and industrial hygiene. Sixty-five percent of nurses held an occupational health nurse credential, and 19% of nurses attended more than 100 hours of CNE annually. Occupational health nurses have multiple workplace roles. Many attend CNE activities and they often prepare for credentialing.

The threat to scientific integrity in environmental and occupational medicine

Over the last century, environmental and occupational medicine has played a significant role in the protection and improvement of public health. However, scientific integrity in this field has been increasingly threatened by pressure from some industries and governments. For example, it has been reported that the tobacco industry manipulated eminent scientists to legitimise their industrial positions, irresponsibly distorted risk and deliberately subverted scientific processes, and influenced many organisations in receipt of tobacco funding. Many environmental whistleblowers were sued and encountered numerous personal attacks. In some countries, scientific findings have been suppressed and distorted, and scientific advisory committees manipulated for political purposes by government agencies. How to respond to these threats is an important challenge for environmental and occupational medicine professionals and their societies. The authors recommend that professional organisations adopt a code of ethics that requires openness from public health professionals; that they not undertake research or use data where they do not have freedom to publish their results if these data have public health implications; that they disclose all possible conflicts; that the veracity of their research results should not be compromised; and that their research independence be protected through professional and legal support. The authors furthermore recommend that research funding for public health not be directly from the industry to the researcher. An independent, intermediate funding scheme should be established to ensure that there is no pressure to analyse data and publish results in bad faith. Such a funding system should also provide equal competition for funds and selection of the best proposals according to standard scientific criteria.

Do Australian public and nonprofit nurses cope with administrative stressors?

The nursing profession in Australia and other OECD countries such as the USA and the UK, have focused on ways to recruit and retain nurses (e.g., Bartram, Joiner, & Stanton, 2004). Research has shown that the most common factors impacting negatively on retention include sources of nursing stress such as workload and work environment. While the literature has shown that nursing staff encounter these stressors, studies do not examine the effects of stress caused by an increasing degree of administrative demand placed on nurses, caused by the new public management (NPM) reform in public and nonprofit (PNP) health care organizations. At best, some studies have alluded to some aspects of administrative related stressors (vis-a-vis nursing related stressors such as death, sickness, etc), but they have not been examined in any detail. Similarly, extant research has not examined how nurses cope with these administrative stressors. These will be the main aims of the present study.

Can identified stressors be used to predict profession for mental health professionals?

A difference appears to exist between stressors reported for nurses and allied health professionals working in mental health. Prominent stressors for mental health nurses include workload, administration duties and a lack of resources. Whilst these also appear to be stressors for allied health professionals, the stressor 'professional self-doubt' has also been reported for social workers. This study aimed to examine the extent to which community mental health professionals could be identified as belonging to the nursing profession or an allied health profession based on their perceived sources of stress. Ninety-eight community mental health nurses and 85 allied health professionals working in Victoria's public mental health services completed the Mental Health Professionals Stress Scale. Discriminant analysis was utilised to test the predictive value of stressors to identify profession. The main stressors reported by nurses were workload, a lack of resources and organisational problems. For allied health professionals the highest reported stressors were workload, a lack of resources, client related difficulties and organisational problems. Mental health professionals in this study could not be identified as belonging to the nursing profession or an allied health profession based on their identified sources of stress. It could well be reflective of the shift to homogenous roles in mental health services. With this being the case, there may be benefits in implementing stress reducing strategies at an organisational level.

The challenge of working in mental health settings: perceptions of newly graduated occupational therapists

Working in mental health settings is a growing area of practice for occupational therapists. The work nowadays is mostly within the community, where occupational therapists may be found in a wide variety of teams. This study investigated the specific challenges that new graduate occupational therapists are faced with when commencing work in a mental health setting. One-to-one semi-structured interviews were carried out with 15 newly graduated occupational therapists, working in mental health settings in south-east Queensland. The interview transcripts were analysed using a consensual qualitative research approach. Three domains were identified from the transcripts. The first related to the ideas of the participants about the skills and knowledge needed by new graduates commencing mental health practice; the second related to the extent to which undergraduate studies had prepared them for practice; and the third related to the means by which they acquired capacity to practise and overcame deficits in skills and knowledge. The core ideas and themes associated with these domains are examined and the implications of the findings for education and training and for orientation to practice are discussed.

Occupational Therapy and Clinical Research in Mental Health Rehabilitation

Practitioners working in Australian mental health services are faced with the challenge of providing appropriate evidence-based interventions that lead to measurable improvement and good outcomes. Current government policy is committed to the development of strategic mental health research. One focus has been on under-researched practice areas, which include the development of psychosocial rehabilitation systems and models that facilitate recovery. To meet this challenge, an Australian rehabilitation service formed a collaborative partnership with a university. The purposes of the collaboration were to implement new forms of service delivery based on consumer need and evidence and to design research projects to evaluate components of the rehabilitation programme. This article examines the process of developing the collaboration and provides examples of how research projects have been used to inform practice and improve the effectiveness of service delivery. Challenges to the sustainability of this kind of collaboration are considered.

Sources of stress experienced by occupational therapists and social workers in mental health settings

This study examined the sources of stress experienced by occupational therapists and social workers employed in Australian public mental health services and identified the demographic and work-related factors related to stress using a cross-sectional survey design. Participants provided demographic and work-related information and completed the Mental Health Professionals Stress Scale. The overall response rate to the survey was 76.6%, consisting of 196 occupational therapists and 108 social workers. Results indicated that lack of resources, relationships and conflicts with other professionals, workload, and professional self-doubt were correlated with increased stress. Working in case management was associated with stress caused by client-related difficulties, lack of resources, and professional self-doubt. The results of this study suggest that Australian occupational therapists and social workers experience stress, with social workers reporting slightly more overall stress than occupational therapists.

Occupational driver safety : conceptualising a leadership-based intervention to improve safe driving performance

Occupational driving crashes are the most common cause of death and injury in the workplace. The physical and psychological outcomes following injury are also very costly to organizations. Thus, safe driving poses a managerial challenge. Some research has attempted to address this issue through modifying discrete and often simple target behaviors (e.g., driver training programs). However, current intervention approaches in the occupational driving field generally do not consider the role of organizational factors in workplace safety. This study adopts the A-B-C framework to identify the contingencies associated with an effective exchange of safety information within the occupational driving context. Utilizing a sample of occupational drivers and their supervisors, this multi-level study examines the contingencies associated with the exchange of safety information within the supervisor-driver relationship. Safety values are identified as an antecedent of the safety information exchange, and the quality of the leader-member exchange relationship and safe driving performance is identified as the behavioral consequences. We also examine the function of role overload as a factor influencing the relationship between safety values and the safety information exchange. Hierarchical Linear Modelling found that role overload moderated the relationship between supervisors’ perceptions of the value given to safety and the safety information exchange. A significant relationship was also found between the safety information exchange and the subsequent quality of the leader-member exchange relationship. Finally, the quality of the leader-member exchange relationship was found to be significantly associated with safe driving performance. Theoretical and practical implications of these results are discussed.