Sustainability of a successful health and nutrition program in a remote Aboriginal community

OBJECTIVE: To assess the long term effect of a nutrition program in a remote Aboriginal community (Minjilang). DESIGN: Evaluation of nutritional outcomes over the three years before and the three years after a health and nutrition program that ran from June 1989 to June 1990. Turnover of food items at the community store was used as a measure of dietary intake at Minjilang and a comparison community. SETTING: A community of about 150 Aboriginal people live at Minjilang on Croker Island, 240 km north-east of Darwin. A similar community of about 300 people on another island was used as the comparison. RESULTS: The program produced lasting improvements in dietary intake of most target foods (including fruit, vegetables and wholegrain bread) and nutrients (including folate, ascorbic acid and thiamine). Sugar intake fell in both communities before the program, but the additional decrease in sugar consumption during the program at Minjilang "rebounded" in the next year. Dietary improvements in the comparison community were delayed and smaller than at Minjilang. CONCLUSIONS: The success of the program at Minjilang was linked to an ongoing process of social change, which in turn provided a stimulus for dietary improvement in the comparison community. When Aboriginal people themselves control and maintain ownership of community-based intervention programs, nutritional improvements can be initiated and sustained.

Measuring dietary intake in remote Australian Aboriginal communities

This paper reports a comparison of the practicality, acceptability and face validity of five dietary intake methods in two remote Australian Aboriginal communities: weighed dietary intake, 24‐hour recall, ‘store‐turnover’, diet history and food frequency methods. The methods used to measure individual dietary intake were poorly accepted by the communities. Quantitative data were obtained only from the first three methods. The 24‐hour recall method tended to produce higher nutrient intakes than the weighed intake method and certain foods appeared to be selectively recalled according to perceived nutritional desirability. The ‘store‐turnover’ method was most acceptable to the communities and had less potential for bias than the other methods. It was also relatively objective, non‐intrusive, rapid, easy and inexpensive. However, food distribution patterns within the communities could not be assessed by this method. Nevertheless, other similarly isolated communities may benefit by use of the ‘store‐turnover’ method.

Survival tucker : improved diet and health indicators in an Aboriginal community

The poor nutritional status of Aboriginal Australians is a serious and complex public health concern. We describe an unusually successful health and nutrition project initiated by the people of Minjilang, which was developed, implemented and evaluated with the community. Apparent community dietary intake, assessed by the ‘store-turnover’ method, and biochemical, anthropometric and haematological indicators of health and nutritional status were measured before intervention and at three-monthly intervals during the intervention year. Following intervention, there was a significant decrease in dietary intake of sugar and saturated fat, an increase in micronutrient density, corresponding improvements in biochemical indices (for example, a 12 per cent decrease in mean serum cholesterol, increases in serum and red cell folate, serum vitamin B6 and plasma ascorbic acid), decrease in mean systolic and diastolic blood pressures, a normalisation of body mass index, and a normalisation of haematologic indices. The success of this project demonstrates that Aboriginal communities can bring about improvements in their generally poor nutritional status, and that the store-turnover method provides a valid, inexpensive and noninvasive method for evaluating the resultant changes in community diet. Although the project was undoubtedly effective in the short term, further work is in progress to assess individual strategies with respect to sustainability, cost-effectiveness and generalisability.

Apparent dietary intake in remote Aboriginal communities

Apparent per capita food and nutrient intake in six remote Australian Aboriginal communities using the ‘store-turnover’ method is described. The method is based on the analysis of community-store food invoices. The face validity of the method supports the notion that, under the unique circumstances of remote Aboriginal communities, the turnover of foodstuffs from the community store is a useful measure of apparent dietary intake for the community as a whole. In all Aboriginal communities studied, the apparent intake of energy, sugars and fat was excessive, while the apparent intake of dietary fibre and several nutrients, including folic acid, was low. White sugar, flour, bread and meat provided in excess of 50 per cent of the apparent total energy intake. Of the apparent high fat intake, fatty meats contributed nearly 40 per cent in northern coastal communities and over 60 per cent in central desert communities. Sixty per cent of the apparent high intake of sugars was derived from sugar per se in both regions. Compared with national Australian apparent consumption data, intakes of sugar, white flour and sweetened carbonated beverages were much higher in Aboriginal communities, and intakes of wholemeal bread, fruit and vegetables were much lower. Results of the store-turnover method have important implications for community-based nutrition intervention programs.

Aboriginal dietary intake and a successful nutrition intervention project in a Northern Territory community

This paper summarises the development and testing of the 'store-turnover' method, a non-invasive dietary survey methodology for quantitative measurement of food and nutrient intake in remote, centralised Aboriginal communities. It then describes the use of the method in planning, implementation and evaluation of a community-based nutrition intervention project in a small Aboriginal community in the Northern Territory. During this project marked improvements in both the dietary intake of the community and biological indicators of nutritional health (including vitamin status and the degree and prevalence of several risk factors for non-communicable disease) were measured in the community over a 12-month period following the development of intervention strategies with the community. Although these specific strategies are presented, emphasis is directed towards the process involved, particularly the evaluation procedures used to monitor all stages of the project with the community.

A toothless chihuahua? : the Australian Competition and Consumer Commission, neoliberalism and supermarket power in Australia

During the Senate Inquiry into 'milk price wars' in 2011, Senator Nick Xenophon accused the Australian Competition and Consumer Commission (ACCC) of being 'less effective than a toothless Chihuahua'. This follows the ACCC's lack of action regarding the reported abuse of market power of Australia's supermarket duopoly, where an extensive inquiry into the competitiveness of retail prices in 2008 found grocery retailing to be 'workably competitive' despite numerous claims to the contrary. How can farmers' submissions to the inquiry that cite market abuse be reconciled with the ACCC's finding that all is well in the food supply chain? Following an in-depth examination of 53 farmer submissions to the inquiry, we conclude that the findings of the ACCC are commensurate with the neoliberal economisation of the political sphere, where commercial entities 'legitimately' govern beyond their corporate boundaries, often using disciplinary measures that were once exclusive to governments. We argue that such clear structural inequalities between farmers and major corporations is reason to re-regulate markets and reinsert a stronger role for government to 'level the playing field'.

Retailer-driven agricultural restructuring - Australia, the UK and Norway in comparison

In recent decades, the governance of food safety, food quality, on-farm environmental management and animal welfare has been shifting from the realm of 'the government' to that of the private sector. Corporate entities, especially the large supermarkets, have responded to neoliberal forms of governance and the resultant 'hollowed-out' state by instituting private standards for food, backed by processes of certification and policed through systems of third party auditing. Today's food regime is one in which supermarkets impose 'private standards' along the food supply chain to ensure compliance with a range of food safety goals-often above and beyond those prescribed by government. By examining regulatory governance in Australia, Norway and the United Kingdom we highlight emerging trajectories of food governance. We argue that the imposition of the new private forms of monitoring and compliance continue the project of agricultural restructuring that began with government support for structural adjustment schemes in agriculture and that these are most evident in the UK and Australia where neoliberalism is an entrenched philosophy. However, despite Norway's identity as a social democracy, we also identify neoliberal 'creep' into the system of food governance. Small-scale producers in all three nations are finding themselves increasingly subject to governance through private, market-based mechanisms that, to varying degrees, are dominated by major supermarket chains. The result is agricultural restructuring not through the traditional avenues of elected governments, but via non-elected market operatives.

An RFID-based traceability system

Traceability system in the food supply chain is becoming more necessary. RFID and EPCglobal Network Standards are emerging technologies that bring new opportunities to develop the high performance traceability system. This research proposes the analysis, design, and development of the RFID and EPCglobal Network Standards based traceability system that adheres to the requirements of global food traceability in terms of completeness of traceability information. The additional components, including lot management system and electronic transaction management system, encourage the traditional system in order to fulfill the missing information. The proposed system was developed and applied in a rice supply chain. Results from experimentation showed that the additional components can significantly improve the completeness of traceability information. The collaboration between EPCglobal Network Standards and electronic transaction management system can improve the performances in RFID operations.

Nutrition in remote Aboriginal communities: Lessons from Mai Wiru and the Anangu Pitjantjatjara Yankunytjatjara Lands

Objective To examine the impact of efforts to improve nutrition on the Anangu Pitjantjatjara Yankunytjatjara (APY) Lands from 1986, especially in Mai Wiru stores. Methods Literature was searched in a systematic manner. In 2012, the store-turnover method was used to quantify dietary intake of the five APY communities that have a Mai Wiru (good food) store. Results were compared with those available from 1986. Prices of a standard market basket of basic foods, implementation of nutrition policy requirements and healthy food checklists were also assessed in all seven APY community stores from 2008 and compared with available data from 1986. Results Despite concerted efforts and achievements decreasing intake of sugar and increasing the availability and affordability of healthy foods, particularly fruit and vegetables, and consequent improvements in some nutrient indicators, the overall effect has been a decrease in diet quality as indicated primarily by the increased supply and proportion of energy intake from discretionary foods, particularly sugar-sweetened beverages, convenience meals and take-away foods. Conclusions The study findings reinforce the notion that, in the absence of supportive regulation and market intervention, adequate and sustained resources are required to improve nutrition and prevent diet-related chronic disease on the APY Lands. Implications This study also provides insights into food supply/security issues affecting other remote Aboriginal communities and wider Australia.

The regulation of food intake in humans

Knowledge of the regulation of food intake is crucial to an understanding of body weight and obesity. Strictly speaking, we should refer to the control of food intake whose expression is modulated in the interests of the regulation of body weight. Food intake is controlled, body weight is regulated. However, this semantic distinction only serves to emphasize the importance of food intake. Traditionally food intake has been researched within the homeostatic approach to physiological systems pioneered by Claude Bernard, Walter Cannon and others; and because feeding is a form of behaviour, it forms part of what Curt Richter referred to as the behavioural regulation of body weight (or behavioural homeostasis). This approach views food intake as the vehicle for energy supply whose expression is modulated by a metabolic drive generated in response to a requirement for energy. The idea was that eating behaviour is stimulated and inhibited by internal signalling systems (for the drive and suppression of eating respectively) in order to regulate the internal environment (energy stores, tissue needs).

Modelling resilience in a water supply system : contrasting conditions of drought and flood

This paper presents an approach to modelling the resilience of a generic (potable) water supply system. The system is contextualized as a meta-system consisting of three subsystems to represent the natural catchment, the water treatment plant and the water distribution infrastructure for urban use. An abstract mathematical model of the meta-system is disaggregated progressively to form a cascade of equations forming a relational matrix of models. This allows the investigation of commonly implicit relationships between various operational components within the meta system, the in-depth understanding of specific system components and influential factors and the incorporation of explicit disturbances to explore system behaviour. Consequently, this will facilitate long-term decision making to achieve sustainable solutions for issues such as, meeting a growing demand or managing supply-side influences in the meta-system under diverse water availability regimes. This approach is based on the hypothesis that the means to achieve resilient supply of water may be better managed by modelling the effects of changes at specific levels that have a direct or in some cases indirect impact on higher-order outcomes. Additionally, the proposed strategy allows the definition of approaches to combine disparate data sets to synthesise previously missing or incomplete higher-order information, a scientifically robust means to define and carry out meta-analyses using knowledge from diverse yet relatable disciplines relevant to different levels of the system and for enhancing the understanding of dependencies and inter-dependencies of variable factors at various levels across the meta-system. The proposed concept introduces an approach for modelling a complex infrastructure system as a meta system which consists of a combination of bio-ecological, technical and socio-technical subsystems.

EatChaFood : challenging technology design to slice food waste production

This paper presents work in progress of EatChaFood – a prototype app designed to increase user knowledge of the currently available domestic supply and location of food, with a view to reducing expired household food waste. In order to reap the benefits that EatChaFood can provide we explore ways to overcome manual data entry as a barrier to use. Our user study has to recognise the limitations of the prototype app, and conduct an evaluation of the interaction design built into the app to promote behaviour change. Innovations in the near future such as the automatic scanning of barcodes on food items or photo-recognition will close the gap between perceived prototype usability and usefulness.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

An approach for identifying the limit states of resilience of a water supply system

This paper presents an approach for identifying the limit states of resilience in a water supply system when influenced by different types of pressure (disturbing) forces. Understanding of systemic resilience facilitates identification of the trigger points for early managerial action to avoid further loss of ability to provide satisfactory service availability when the ability to supply water is under pressure. The approach proposed here is to illustrate the usefulness of a surrogate measure of resilience depicted in a three dimensional space encompassing independent pressure factors. That enables visualisation of the transition of the system-state (resilience) between high to low resilience regions and acts as an early warning trigger for decision-making. The necessity of a surrogate measure arises as a means of linking resilience to the identified pressures as resilience cannot be measured directly. The basis for identifying the resilience surrogate and exploring the interconnected relationships within the complete system, is derived from a meta-system model consisting of three nested sub-systems representing the water catchment and reservoir; treatment plant; and the distribution system and end-users. This approach can be used as a framework for assessing levels of resilience in different infrastructure systems by identifying a surrogate measure and its relationship to relevant pressures acting on the system.