Actigraphy assessment of mother's sleep at 6, 12 & 18 weeks postpartum

Introduction: Mothers’ sleep during the postpartum period is commonly characterised by bouts of sleep across the night, resulting in low sleep efficiency and daytime sleepiness. Understanding of the nature of mothers’ sleep disruption needs to incorporate indices of both sleep quantity and sleep quality, but objective assessment of sleep disturbance experienced during the first postpartum months has not been investigated in great detail. This longitudinal study aimed to objectively measure mothers’ sleep during the first 18 weeks postpartum, to ascertain the level of sleep disturbance experienced. Method: Eleven mothers (Mean age = 29.82, SD = 4.45) from Australia wore Actiwatch-2 devices for up to 7 days and nights at 6, 12 and 18 weeks postpartum. For each night of recording, a number of sleep bouts were identified. Total sleep time (TST) was calculated as the total number of minutes across the night within these bouts. Sleep efficiency was calculated as the percentage of minutes across the night classified as being part of a sleep bout, with higher scores indicating higher efficiency. Sleep quality captured the efficiency of sleep within sleep bouts, and was calculated as the percentage of epochs classified as sleep within sleep bouts, with higher scores indicating higher sleep quality. Results: At 6 weeks postpartum, mean total sleep time was 420.22 minutes (SD = 50.61). Total sleep time did not significantly differ across the assessment; however there was a trend towards an increase over time. Sleep efficiency increased across the time periods (F(2,10) = 10.30, p = .001), with a significant increase between week 12 and week 18. At 6 weeks postpartum, mean sleep quality was 93.15% (SD = 2.68) and scores did not significantly change across the assessment periods. While there was no relationship between sleep efficiency and sleep quality during weeks 6 and 12, a significant positive relationship was observed at week 18, r2 = .52, p = .013. Conclusions: Within this sample, a low level of disruption was consistently shown within the mothers’ night time sleep bouts. However, overall sleep efficiency suggested a significant proportion of time spent awake between sleep bouts. While TST remained stable over time, overall sleep efficiency improved, suggesting the mothers’ sleep was becoming more consolidated. A single sleep bout a night was not often experienced.

Phase III study of matrix metalloproteinase inhibitor prinomastat in non-small-cell lung cancer

Purpose: Matrix metalloproteinases (MMPs) degrade extracellular proteins and facilitate tumor growth, invasion, metastasis, and angiogenesis. This trial was undertaken to determine the effect of prinomastat, an inhibitor of selected MMPs, on the survival of patients with advanced non-small-cell lung cancer (NSCLC), when given in combination with gemcitabine-cisplatin chemotherapy. Patients and Methods: Chemotherapy-naive patients were randomly assigned to receive prinomastat 15 mg or placebo twice daily orally continuously, in combination with gemcitabine 1,250 mg/m2 days 1 and 8 plus cisplatin 75 mg/m2 day 1, every 21 days for up to six cycles. The planned sample size was 420 patients. Results: Study results at an interim analysis and lack of efficacy in another phase III trial prompted early closure of this study. There were 362 patients randomized (181 on prinomastat and 181 on placebo). One hundred thirty-four patients had stage IIIB disease with T4 primary tumor, 193 had stage IV disease, and 34 had recurrent disease (one enrolled patient was ineligible with stage IIIA disease). Overall response rates for the two treatment arms were similar (27% for prinomastat v 26% for placebo; P = .81). There was no difference in overall survival or time to progression; for prinomastat versus placebo patients, the median overall survival times were 11.5 versus 10.8 months (P = .82), 1-year survival rates were 43% v 38% (P = .45), and progression-free survival times were 6.1 v 5.5 months (P = .11), respectively. The toxicities of prinomastat were arthralgia, stiffness, and joint swelling. Treatment interruption was required in 38% of prinomastat patients and 12% of placebo patients. Conclusion: Prinomastat does not improve the outcome of chemotherapy in advanced NSCLC. © 2005 by American Society of Clinical Oncology.

Murray Valley Encephalitis

Outbreaks of an acute, severe, encephalitic illness, clinically similar to Japanese and St. Louis encephalitis, occurred in rural areas of southeastern Australia in 1917, 1918, 1922, 1925, 1951, and 1974[1,9,14-16] and in north and northwestern Australia in 1981, 1993, and 2000.[8,12,41] Approximately 420 cases were reported in these nine outbreaks.[41] They are thought to represent a single entity for which various names (Australian X disease, Murray Valley encephalitis, Australian encephalitis) have been used. Twenty-two cases were diagnosed in the 5 years between 2007 and 2011; three were fatal, and one of the fatalities occurred in a Canadian tourist on return from a holiday in northern Australia. Case-fatality rates, as high as 70 percent in the early years,[9,11] declined to 20 percent in the 1974 outbreak and have remained at about this level since then.[5,10,12] However, significant residual neurologic disability occurs in as many as 50 percent of survivors.[10,12] The presence of this disease in Papua New Guinea was confirmed in 1956.[20] The causative virus was transmitted to experimental animals as early as 1918,[6,11] although those strains could not be maintained. The definitive isolation and characterization of Murray Valley encephalitis virus in 1951[19] led to epidemiologic studies that suggested its survival in bird-mosquito cycles in northern Australia but not in the area of epidemic occurrence in southern Australia.[1] Murray Valley encephalitis is caused by Murray Valley encephalitis virus. In an effort to dissociate a disease from a specific locality, the term Australian encephalitis was proposed by residents of Murray Valley for the disease caused by Murray Valley encephalitis virus. Some researchers subsequently have attempted to expand the term Australian encephalitis to include encephalitis caused by any Australian arbovirus. Because the term Australian encephalitis has no scientific validity and is ambiguous, it should not be used.

Age-dependence of the average and equivalent refractive indices of the crystalline lens

Lens average and equivalent refractive indices are required for purposes such as lens thickness estimation and optical modeling. We modeled the refractive index gradient as a power function of the normalized distance from lens center. Average index along the lens axis was estimated by integration. Equivalent index was estimated by raytracing through a model eye to establish ocular refraction, and then backward raytracing to determine the constant refractive index yielding the same refraction. Assuming center and edge indices remained constant with age, at 1.415 and 1.37 respectively, average axial refractive index increased (1.408 to 1.411) and equivalent index decreased (1.425 to 1.420) with age increase from 20 to 70 years. These values agree well with experimental estimates based on different techniques, although the latter show considerable scatter. The simple model of index gradient gives reasonable estimates of average and equivalent lens indices, although refinements in modeling and measurements are required.

Children's exposure to domestic violence in Australia

Children's 'witnessing' or exposure to domestic violence has been increasingly recognised as a form of child abuse, both in Australia and internationally. Although it is difficult to accurately assess the scope of the problem, research has demonstrated that a substantial amount of domestic violence is witnessed by children. As this paper outlines, witnessing domestic violence can involve a range of incidents, ranging from the child 'only' hearing the violence, to the child being forced to participate in the violence or being used as part of a violent incident. In this paper, current knowledge about the extent of children's exposure to domestic violence in Australia is described, along with the documented impacts that this exposure can have on children. This includes psychological and behavioural impacts, health and socioeconomic impacts, and its link to the intergenerational transmission of violence and re-victimisation. Current legislative and policy initiatives are then described and some community-based programs that have been introduced in Australia to address the problem of children's exposure to domestic violence are highlighted. The paper concludes that initiatives focused on early intervention and holistic approaches to preventing and responding to children's exposure to domestic violence should be considered as part of strategies developed to address this problem.

What makes juvenile offenders different from adult offenders?

Historically, children in criminal justice proceedings were treated much the same as adults and subject to the same criminal justice processes as adults. Until the early twentieth century, children in Australia were even subjected to the same penalties as adults, including hard labour and corporal and capital punishment (Carrington & Pereira 2009). Until the mid-nineteenth century, there was no separate category of ’juvenile offender’ in Western legal systems and children as young as six years of age were incarcerated in Australian prisons (Cunneen & White 2007). It is widely acknowledged today, however, both in Australia and internationally, that juveniles should be subject to a system of criminal justice that is separate from the adult system and that recognises their inexperience and immaturity. As such, juveniles are typically dealt with separately from adults and treated less harshly than their adult counterparts. The United Nations’ (1985: 2) Standard Minimum Rules for the Administration of Juvenile Justice (the ‘Beijing Rules’) stress the importance of nations establishing a set of laws, rules and provisions specifically applicable to juvenile offenders and institutions and bodies entrusted with the functions of the administration of juvenile justice and designed to meet the varying needs of juvenile offenders, while protecting their basic rights. In each Australian jurisdiction, except Queensland, a juvenile is defined as a person aged between 10 and 17 years of age, inclusive. In Queensland, a juvenile is defined as a person aged between 10 and 16 years, inclusive. In all jurisdictions, the minimum age of criminal responsibility is 10 years. That is, children under 10 years of age cannot be held legally responsible for their actions.

Trends in juvenile detention in Australia

This paper provides an overview of key trends in juvenile detention in Australia, based on data contained in the Australian Institute of Criminology’s (AIC’s) Juveniles in Detention in Australia Monitoring Program database and then provides a discussion of two key trends in juvenile detention—the national increase in the proportion of juvenile detainees that is remanded (rather than sentenced) and the increase in the over-representation of Indigenous juveniles in detention.

Study protocol : a randomised controlled trial of a theory-based online intervention to improve sun safety among Australian adults

Background The effects of exposure to ultraviolet radiation are a significant concern in Australia which has one of the highest incidences of skin cancer in the world. Despite most skin cancers being preventable by encouraging consistent adoption of sun-protective behaviours, incidence rates are not decreasing. There is a dearth of research examining the factors involved in engaging in sun-protective behaviours. Further, online multi-behavioural theory-based interventions have yet to be explored fully as a medium for improving sun-protective behaviour in adults. This paper presents the study protocol of a randomised controlled trial of an online intervention based on the Theory of Planned Behaviour (TPB) that aims to improve sun safety among Australian adults. Methods/Design Approximately 420 adults aged 18 and over and predominantly from Queensland, Australia, will be recruited and randomised to the intervention (n = 200), information only (n = 200) or the control group (n = 20). The intervention focuses on encouraging supportive attitudes and beliefs toward sun-protective behaviour, fostering perceptions of normative support for sun protection, and increasing perceptions of control/self-efficacy over sun protection. The intervention will be delivered online over a single session. Data will be collected immediately prior to the intervention (Time 1), immediately following the intervention (Time 1b), and one week (Time 2) and one month (Time 3) post-intervention. Primary outcomes are intentions to sun protect and sun-protective behaviour. Secondary outcomes are the participants’ attitudes toward sun protection, perceptions of normative support for sun protection (i.e. subjective norms, group norms, personal norms and image norms) and perceptions of control/self-efficacy toward sun protection. Discussion The study will contribute to an understanding of the effectiveness of a TPB-based online intervention to improve Australian adults’ sun-protective behaviour. Trials registry Australian and New Zealand Trials Registry number ACTRN12613000470796

Raman spectroscopy of the arsenate minerals maxwellite and in comparison with tilasite

Maxwellite NaFe3+(AsO4)F is an arsenate mineral containing fluoride and forms a continuous series with tilasite CaMg(AsO4)F. Both maxwellite and tilasite form a continuous series with durangite NaAl3+(AsO4)-F. We have used the combination of scanning electron microscopy with EDS and vibrational spectroscopy to chemically analyse the mineral maxwellite and make an assessment of the molecular structure. Chemical analysis shows that maxwellite is composed of Fe, Na and Ca with minor amounts of Mn and Al. Raman bands for tilasite at 851 and 831 cm�1 are assigned to the Raman active m1 symmetric stretching vibration (A1) and the Raman active triply degenerate m3 antisymmetric stretching vibration (F2). The Raman band of maxwellite at 871 cm�1 is assigned to the m1 symmetric stretching vibration and the Raman band at 812 cm�1 is assigned to the m3 antisymmetric stretching vibration. The intense Raman band of tilasite at 467 cm�1 is assigned to the Raman active triply degenerate m4 bending vibration (F2). Raman band at 331 cm�1 for tilasite is assigned to the Raman active doubly degenerate m2 symmetric bending vibration (E). Both Raman and infrared spectroscopy do not identify any bands in the hydroxyl stretching region as is expected.

Web crippling tests of hollow flange channel beams : ETF AND ITF load cases

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel Beam (LSB) subject to web crippling actions (ETF and ITF). Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear actions and combined actions. To date, however, no investigation has been conducted into the web crippling behaviour and strength of LSB sections under ETF and ITF load conditions. Hence experimental studies were conducted to assess the web crippling behaviour and strengths of LSBs. Twenty eight web crippling tests were conducted and the results were compared with the current AS/NZS 4600[1] and AISI S100 [2]design equations. Comparison of the ultimate web crippling capacities from tests showed that AS/NZS 4600[1] and AISI S100 [2] design equations are unconservative for LSB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs. Suitable design rules were also developed under the DSM format.

Identification and Validity of Accelerometer Cut-Points for Toddlers

The purpose of this study was to derive ActiGraph cut-points for sedentary (SED), light-intensity physical activity (LPA), and moderate-to-vigorous physical activity (MVPA) in toddlers and evaluate their validity in an independent sample. The predictive validity of established preschool cut-points were also evaluated and compared. Twenty-two toddlers (mean age = 2.1 years ± 0.4 years) wore an ActiGraph accelerometer during a videotaped 20-min play period. Videos were subsequently coded for physical activity (PA) intensity using the modified Children's Activity Rating Scale (CARS). Receiver operating characteristic (ROC) curve analyses were conducted to determine cut-points. Predictive validity was assessed in an independent sample of 18 toddlers (mean age = 2.3 ± 0.4 years). From the ROC curve analyses, the 15-s count ranges corresponding to SED, LPA, and MVPA were 0–48, 49–418, and >418 counts/15 s, respectively. Classification accuracy was fair for the SED threshold (ROC-AUC = 0.74, 95% confidence interval = 0.71–0.76) and excellent for MVPA threshold (ROC-AUC = 0.90, 95% confidence interval = 0.88–0.92). In the cross-validation sample, the toddler cut-point and established preschool cut-points significantly overestimated time spent in SED and underestimated time in spent in LPA. For MVPA, mean differences between observed and predicted values for the toddler and Pate cut-points were not significantly different from zero. In summary, the ActiGraph accelerometer can provide useful group-level estimates of MVPA in toddlers. The results support the use of the Pate cut-point of 420 counts/15 s for MVPA.

Health promotion for dogs and humans : the 10,000 steps Rockhampton dog walking intervention

Purpose This paper describes the implementation and evaluation of an intervention aimed at increasing the dog-walking behaviour of residents from a community of approximately 60,000. This intervention was a sub strategy of the 10 000 Steps Rockhampton project – a community intervention aimed at decreasing sedentary behaviour in the adult population. Methods Brochures and posters were developed that promoted dog walking as a means to improve both human and canine health. The brochures were distributed by the local council to over 8 000 homes with the annual dog-renewal registrations. Results Evaluation of the intervention included a telephone survey of a randomly selected sample of Rockhampton residents (n=420) four-months post intervention. Although 63.6% of participants reported that owning a dog increased their physical activity levels, 40% of dog-owners did not walk their dog at all in the last week. The outcome evaluation of the intervention showed that 20.2% of dog-owners recalled receiving the brochure. Overall 15.3% of respondents with a dog in their household reported an increase in their physical activity levels since the intervention, 8.4% reported a decrease. Conclusions The intervention was an innovative and cost-effective way to tap into a section of the population that can benefit from engaging in regular walking behaviour. It was also a unique and useful way to engage local council in physical activity health promotion as part of a larger ongoing community-wide intervention.

Low-frequency, high-density, inductively coupled plasma sources : operation and applications

Operation regimes, plasma parameters, and applications of the low-frequency (∼500 kHz) inductively coupled plasma (ICP) sources with a planar external coil are investigated. It is shown that highly uniform, high-density (ne∼9×1012 cm-3) plasmas can be produced in low-pressure argon discharges with moderate rf powers. The low-frequency ICP sources operate in either electrostatic (E) or electromagnetic (H) regimes in a wide pressure range without any Faraday shield or an external multipolar magnetic confinement, and exhibit high power transfer efficiency, and low circuit loss. In the H mode, the ICP features high level of uniformity over large processing areas and volumes, low electron temperatures, and plasma potentials. The low-density, highly uniform over the cross-section, plasmas with high electron temperatures and plasma and sheath potentials are characteristic to the electrostatic regime. Both operation regimes offer great potential for various plasma processing applications. As examples, the efficiency of the low-frequency ICP for steel nitriding and plasma-enhanced chemical vapor deposition of hydrogenated diamond-like carbon (DLC) films, is demonstrated. It appears possible to achieve very high nitriding rates and dramatically increase micro-hardness and wear resistance of the AISI 304 stainless steel. It is also shown that the deposition rates and mechanical properties of the DLC films can be efficiently controlled by selecting the discharge operating regime.