Development of gas sensing technology for ground and airborne applications powered by solar energy : methodology and experimental results

Monitoring gases for environmental, industrial and agricultural fields is a demanding task that requires long periods of observation, large quantity of sensors, data management, high temporal and spatial resolution, long term stability, recalibration procedures, computational resources, and energy availability. Wireless Sensor Networks (WSNs) and Unmanned Aerial Vehicles (UAVs) are currently representing the best alternative to monitor large, remote, and difficult access areas, as these technologies have the possibility of carrying specialised gas sensing systems, and offer the possibility of geo-located and time stamp samples. However, these technologies are not fully functional for scientific and commercial applications as their development and availability is limited by a number of factors: the cost of sensors required to cover large areas, their stability over long periods, their power consumption, and the weight of the system to be used on small UAVs. Energy availability is a serious challenge when WSN are deployed in remote areas with difficult access to the grid, while small UAVs are limited by the energy in their reservoir tank or batteries. Another important challenge is the management of data produced by the sensor nodes, requiring large amount of resources to be stored, analysed and displayed after long periods of operation. In response to these challenges, this research proposes the following solutions aiming to improve the availability and development of these technologies for gas sensing monitoring: first, the integration of WSNs and UAVs for environmental gas sensing in order to monitor large volumes at ground and aerial levels with a minimum of sensor nodes for an effective 3D monitoring; second, the use of solar energy as a main power source to allow continuous monitoring; and lastly, the creation of a data management platform to store, analyse and share the information with operators and external users. The principal outcomes of this research are the creation of a gas sensing system suitable for monitoring any kind of gas, which has been installed and tested on CH4 and CO2 in a sensor network (WSN) and on a UAV. The use of the same gas sensing system in a WSN and a UAV reduces significantly the complexity and cost of the application as it allows: a) the standardisation of the signal acquisition and data processing, thereby reducing the required computational resources; b) the standardisation of calibration and operational procedures, reducing systematic errors and complexity; c) the reduction of the weight and energy consumption, leading to an improved power management and weight balance in the case of UAVs; d) the simplification of the sensor node architecture, which is easily replicated in all the nodes. I evaluated two different sensor modules by laboratory, bench, and field tests: a non-dispersive infrared module (NDIR) and a metal-oxide resistive nano-sensor module (MOX nano-sensor). The tests revealed advantages and disadvantages of the two modules when used for static nodes at the ground level and mobile nodes on-board a UAV. Commercial NDIR modules for CO2 have been successfully tested and evaluated in the WSN and on board of the UAV. Their advantage is the precision and stability, but their application is limited to a few gases. The advantages of the MOX nano-sensors are the small size, low weight, low power consumption and their sensitivity to a broad range of gases. However, selectivity is still a concern that needs to be addressed with further studies. An electronic board to interface sensors in a large range of resistivity was successfully designed, created and adapted to operate on ground nodes and on-board UAV. The WSN and UAV created were powered with solar energy in order to facilitate outdoor deployment, data collection and continuous monitoring over large and remote volumes. The gas sensing, solar power, transmission and data management systems of the WSN and UAV were fully evaluated by laboratory, bench and field testing. The methodology created to design, developed, integrate and test these systems was extensively described and experimentally validated. The sampling and transmission capabilities of the WSN and UAV were successfully tested in an emulated mission involving the detection and measurement of CO2 concentrations in a field coming from a contaminant source; the data collected during the mission was transmitted in real time to a central node for data analysis and 3D mapping of the target gas. The major outcome of this research is the accomplishment of the first flight mission, never reported before in the literature, of a solar powered UAV equipped with a CO2 sensing system in conjunction with a network of ground sensor nodes for an effective 3D monitoring of the target gas. A data management platform was created using an external internet server, which manages, stores, and shares the data collected in two web pages, showing statistics and static graph images for internal and external users as requested. The system was bench tested with real data produced by the sensor nodes and the architecture of the platform was widely described and illustrated in order to provide guidance and support on how to replicate the system. In conclusion, the overall results of the project provide guidance on how to create a gas sensing system integrating WSNs and UAVs, how to power the system with solar energy and manage the data produced by the sensor nodes. This system can be used in a wide range of outdoor applications, especially in agriculture, bushfires, mining studies, zoology, and botanical studies opening the way to an ubiquitous low cost environmental monitoring, which may help to decrease our carbon footprint and to improve the health of the planet.

Succession law keeping pace with changes in technology and community expectations – informal wills

Purpose - The purpose of this paper is to provide insights into recent developments in the way the law of succession allows people to use new technologies to document their testamentary intentions in an informal way. Design/methodology/approach – This article considers one area in which the law has arguably kept good pace with advances in society’s expectations and technological change – the law of succession. This article examines the legislative reforms in Queensland and other jurisdictions permitting the recognition of informal wills and the decided cases in the area. In particular, the article examines the decision in a Queensland Supreme Court case in which the court recognised the validity of a will made on an iPhone. Research limitations/implications – This is a doctrinal analysis, not an empirical study, and accordingly is limited to providing details specific to the legislation and the court cases selected.

Why the energy technology revolution hasn't happened

The main thrusts of this TEDx talk are rooted in findings from original research by Rob Perrons concerning the role of industry clockspeed on technology-focused startups. The study involved extensive exposure to five member companies from the Shell Technology Ventures portfolio of companies over a three-year period, and shed new light on the specific mechanics that were contributing to these companies’ inability to get traction for their respective innovations within the marketplace. This evidence is also being coalesced into scholarly and scholarly publications—but this TEDx talk was a first release of a few of these high-level findings.

Technology, Natural Resources and Economic Growth: Improving the Environment for a Greener Future

Description Through a combination of global data analysis and focused country level analysis, this timely book provides answers to the most pertinent country and industry specific questions defining the current relationship between technology, natural resources and economic growth. Contents Contents: Preface Part I: Global Analysis 1. Economic Growth and the Environment 2. Energy Substitution and Carbon Dioxide Emissions 3. Pollution, Natural Resources, and Economic Growth 4. Trade Openness and Environmental Quality 5. Environmental Productivity 6. Energy Price-induced Technological Change 7. Trade-induced Technological Change 8. Regional Economic Integration Part II: Country-Level Analysis 9. Emissions Trading in the United States 10. Increasing Returns to Pollution Abatement in the United States 11. Policy-induced Competitiveness in the United States 12. Trade Liberalization, Technology, and the Environment 13. Policy Implementation and its Effectiveness in China 14. Clean Technological Inventions in Japan 15. Intervention of Economic Policy and its Nonlinear Effects in Japan 16. The Next Emerging Giants: India and Africa 17. Conclusion Index Further information Through a combination of global data analysis and focused country level analysis, this timely book provides answers to the most pertinent country and industry specific questions defining the current relationship between technology, natural resources and economic growth. Shunsuke Managi takes a distinctive approach by focusing on the design and implementation of environmental regulations that encourage technological progress and, in doing so, looks at ways to ensure productivity improvements in the face of increasingly stringent environmental regulations and natural resource depletion. The findings in this important book demonstrate how successful environmental policies can contribute to efficiency by encouraging, rather than inhibiting, technological innovation. Technology, Natural Resources and Economic Growth will provide a valuable resource for a wide readership including postgraduate students, researchers, academics and policy makers working in the fields of environmental and ecological economics.

Foreign direct investment and technology spillovers in sub-Saharan Africa

Foreign direct investment (FDI) is an effective conduit for technology transfer through technology spillovers to domestically owned firms in the host country. This study analyses the significance of productivity externalities of FDI to local firms, in terms of both intra-industry and inter-industry spillovers, using firm-level data from Kenya, Tanzania and Zimbabwe. The results show evidences in support of intra- and inter-industry productivity spillovers from FDI for Kenya and Zimbabwe. © 2010 Taylor & Francis.

Developments in mud filtration technology in the sugarcane industry

Dirt collected with sugarcane is processed and separated from the juice in the sugar factory by filtration equipment for return to the cane fields. New technologies over the past decade have enabled performance improvements to be obtained for this key unit operation. Filter mud product still contains a reasonable amount of sugar and the transportation of high moisture mud product has considerable cost. Australia’s traditional approach has been to use Rotary Vacuum Filters for processing and separating mud and other impurities from juice, but in recent years there has been interest in reducing sugar losses and transportation costs through utilisation of new technologies such as Horizontal Bed Filters, Vacuum Belt Press Filters, Membrane Press Filters and Centrifuges. Increasingly, these alternative equipment are being installed in new factories. This chapter describes the general principles of mud filtration theory and mud conditioning followed by a detailed description and review of the various filtration technologies and analysis of the relative merits associated with the equipment.

In vitro and in vivo assessment of bioactive composite scaffolds fabricated via additive manufacturing technology

Additive manufacturing (AM) technology was implemented together with new composite material comprising a synthetic materials, namely, polycaprolactone and bioactive glass with the ultimate aim of the production of an off-the-shelf composite bone scaffold product with superior bone regeneration capacity in a cost effective manner. Our studies indicated that the composite scaffolds have huge potential in promoting bone regeneration. It is our contention that owing to the fruits of such innovative efforts, the field of bone regeneration can metamorphose into a technology platform that allows clinicians worldwide to create tissue-engineered bone with economies of scale in the years to come.

More than just friends? Facebook, disclosive ethics and the morality of technology

Social networking sites have become increasingly popular destinations for people wishing to chat, play games, make new friends or simply stay in touch. Furthermore, many organizations have been quick to grasp the potential they offer for marketing, recruitment and economic activities. Nevertheless, counterclaims depict such spaces as arenas where deception, social grooming and the posting of defamatory content flourish. Much research in this area has focused on the ends to which people deploy the technology, and the consequences arising, with a view to making policy recommendations and ethical interventions. In this paper, we argue that tracing where morality lies is more complex than these efforts suggest. Using the case of a popular social networking site, and concepts about the morality of technology, we disclose the ethics of Facebook as diffuse and multiple. In our conclusions we provide some reflections on the possibilities for action in light of this disclosure.

Enterprise Business Technology Governance: Three Competencies to Build Board Digital Leadership Capability.

The competent leadership of digital transformation needs to involve the board of directors. The reported lack of such capability in boards is becoming a pressing issue. A part of leadership in such transformation is the board of director’s competence to lead Enterprise Business Technology Governance (EBTG). In this paper we take the position that EBTG competencies are essential in boards, because competent EBTG has been shown to contribute to increased revenue, profit, and returns. We update and expand on the results of a multi-method approach to the development of a set of three board of director competencies needed for effective EBTG.

Business model adaptation in new ventures: are technology-based firms different?

A firm’s business model (BM) is an important driver of its relative performance. Constructive adaptation to elements of the BM can therefore sustain the position in light of changing conditions. This study takes a configurational approach to understanding drivers of business model adaptation (BMA) in new ventures. We investigate the effect of human capital, social capital, and technological environment on BMA. We find that a universal, direct effects, analysis can provide useful information, but also risks painting a distorted picture. Contingent, two-way interactions add further explanatory power, but configurational models combining elements of all three (internal resource, external activities, environment) are superior.

Australian consumer attitudes and decision making on renewable energy technology and its impact on the transformation of the energy sector

This paper critically examines research on consumer attitudes and behavior towards solar photovoltaic (PV) and renewable energy technology in Australia. The uptake of renewable energy technology by residential consumers in Australia in the past decade has transformed the electricity supply and demand paradigm. Thus, this paper reviews Australian research on consumer behavior, understanding and choices in order to identify gaps in knowledge. As the role of the consumer transforms there is a critical need to understand the ways consumers may respond to future energy policies to mitigate unforeseen negative social and economic consequence of programs designed to achieve positive environmental outcomes.

Digital technology and public apology : responses by Indigenous Australians to a government saying sorry

Australia has had two recent public apologies, one to the ‘ Stolen Generation’ of Aboriginal and Torres Strait Islander Australians and the second to the ‘Forgotten Australians' – people who had been removed from their parents as children and institutionalized. Both acts occurred in time when there was no Internet and peoples’ stories took years to collect and decades for their weight to carry the public momentum required to gain a public apology. Now, in a digital age, the reports and the testimonies held within them are available for all to read on the Internet. We all now know what happened and formal public apologies ensued. Both public apologies also draw attention to an emerging intersection between digital technologies, personal historical stories and public apology. Research has identified the potential of digital narrative, such as digital storytelling3 and videoed oral histories to assist in the production of digital narratives that can help to present the multiple voices and viewpoints of those affected by these subjects co-creatively (Burgess et al, pp.152-153). Not all Australians however have access or the skills to use digital tools so as to benefit from these technologies ⎯ especially Indigenous Australians. While the Federal Government is committed to helping Australians enjoy digital confidence and digital media literacy skills, experience inclusive digital participation and benefit through online engagement (Department of Broadband, communications and the Digital Economy, 2009) there are many initiatives that can also be undertaken locally by State funded institutions, such as libraries to assist. This paper highlights the outcomes of recent empirical projects undertaken at the State Library of Queensland (SLQ) in particular focusing on digital initiatives in Family History practices by Indigenous users, and a digital story project in response to the public apology to the Stolen Generation instigated by SLQ.

A/Effective connections : mobility, technology and well-being

This article investigates the significance of internet communication technologies for mediating affect in ways that help promote feelings of well-being among recently arrived migrants from culturally and linguistically diverse communities (CALD) in Australia. It is based on a qualitative study that focuses on the internet's communicative capabilities for maintaining kinship ties in homeland countries, and for forging new connections in the host city of Brisbane during the early re-settlement period. Through the experience of ‘presence’ and affective communities, it emphasizes the ways in which visually mediated interaction helps to combat feelings of social isolation and loneliness. The study finds that internet use is creating new forms of sociality among migrants and plays a key role in the re-settlement period. It highlights the importance of publicly available computers and training for migrants.