A dedicated retrieval and transfer service : the QUARTS project

Background The transfer and/or retrieval of a critically patient is inherently dangerous not only for the patient but for staff as well. The quality and experience of unplanned transfers can influence patient mortality and morbidity. However, international evidence suggests that dedicated transfer/retrieval teams can improve mortality and morbidity outcomes. Aims The initial aim of this paper is to describe an in-house competency-based training programme, which encompasses the STaR approach to develop members of our existing nursing team to be part of the dedicated transfer/retrieval service. The paper also presents audit data findings which examined the source of referrals, number of patients actually transferred and clinical status of those being transferred. Results Audit data illustrate that the most frequent source of referrals comes from Accident and Emergency and the Surgical Directorate with the most common presenting condition being cardio-respiratory failure or arrest. Audit data reveal that the number of patients actually transferred or retrieved is relatively small (33%) compared with the overall number of requests for assistance. However, 36% of those patients transferred had a level 2 or level 3 acuity status that necessitated the admission to a critical care area. Conclusions A number of studies have concluded that the ill-experienced and ill-equipped transfer team can place patients’ at serious risk of harm. Whether planned or unplanned, dedicated critical care transfer/retrieval teams have been shown to reduce patient mortality and morbidity.

A neutron diffraction investigation of residual stresses in rail ends after severe deformation of rail surfaces

Insulated rail joints (IRJs) are a primary component of the rail track safety and signalling systems. Rails are supported by two fishplates which are fastened by bolts and nuts and, with the support of sleepers and track ballast, form an integrated assembly. IRJ failure can result from progressive defects, the propagation of which is influenced by residual stresses in the rail. Residual stresses change significantly during service due to the complex deformation and damage effects associated with wheel rolling, sliding and impact. IRJ failures can occur when metal flows over the insulated rail gap (typically 6-8 mm width), breaks the electrically isolated section of track and results in malfunction of the track signalling system. In this investigation, residual stress measurements were obtained from rail-ends which had undergone controlled amounts of surface plastic deformation using a full scale wheel-on-track simulation test rig. Results were compared with those obtained from similar investigations performed on rail ends associated with ex-service IRJs. Residual stresses were measured by neutron diffraction at the Australian Nuclear Science and Technology Organisation (ANSTO). Measurements with constant gauge volume 3x3x3 mm3 were carried in the central vertical plane on 5mm thick sliced rail samples cut by an electric discharge machine (EDM). Stress evolution at the rail ends was found to exhibit characteristics similar to those of the ex-service rails, with a compressive zone of 5mm deep that is counterbalanced by a tension zone beneath, extending to a depth of around 15mm. However, in contrast to the ex-service rails, the type of stress distribution in the test-rig deformed samples was apparently different due to the localization of load under the particular test conditions. In the latter, in contrast with clear stress evolution, there was no obvious evolution of d0. Since d0 reflects rather long-term accumulation of crystal lattice damage and microstructural changes due to service load, the loading history of the test rig samples has not reached the same level as the ex-service rails. It is concluded that the wheel-on-rail simulation rig provides the potential capability for testing the wheel-rail rolling contact conditions in rails, rail ends and insulated rail joints.

Pre-service teachers’ epistemic perspectives about philosophy in the classroom : it is not a bunch of ‘hippie stuff’

Using epistemic perspectives as a theoretical framework, this study investigated Australian pre-service teachers’ perspectives about knowing, knowledge and children’s learning, as they engaged in a semester-long unit on philosophy in the classroom. During the field experience component of the unit, pre-service teachers were required to teach at least one philosophy lesson. Pre-service teachers completed the Personal Epistemological Beliefs Survey at the beginning and end of the unit. They were also interviewed in focus groups at the end of the semester to investigate their views about children’s learning. Paired sample t-tests were used to explore changes in epistemic beliefs over time. Significant differences were found for only some individual items on the survey. However, when interviewed, pre-service teachers indicated that field experiences helped them consider children as competent ‘thinkers’ who were capable of engaging in philosophy in the classroom. They reported predominantly student-centred perspectives of children’s learning, although a process of adjudication (exploring disagreements and evidence for responses) was lacking in these responses.

Tell me what you see : pre-service teachers' recognition of exemplary digital pedagogy

How do you identify "good" teaching practice in the complexity of a real classroom? How do you know that beginning teachers can recognise effective digital pedagogy when they see it? How can teacher educators see through their students’ eyes? The study in this paper has arisen from our interest in what pre-service teachers “see” when observing effective classroom practice and how this might reveal their own technological, pedagogical and content knowledge. We asked 104 pre-service teachers from Early Years, Primary and Secondary cohorts to watch and comment upon selected exemplary videos of teachers using ICT (information and communication technologies) in Science. The pre-service teachers recorded their observations using a simple PMI (plus, minus, interesting) matrix which were then coded using the SOLO Taxonomy to look for evidence of their familiarity with and judgements of digital pedagogies. From this, we determined that the majority of preservice teachers we surveyed were using a descriptive rather than a reflective strategy, that is, not extending beyond what was demonstrated in the teaching exemplar or differentiating between action and purpose. We also determined that this method warrants wider trialling as a means of evaluating students’ understandings of the complexity of the digital classroom.

Reframing Conceptions of Contemporary Literacy Capabilities in Pre-Service Primary Teacher Education

This chapter describes the challenges of integrating new technologies with literacy education in pre-service primary teacher education in Australia. The authors describe the policy context and regulatory mechanisms controlling pre-service education, including a national set of professional standards for graduate teachers, a new national curriculum for school students, the introduction of high stakes national assessment for school students, and the looming threat of decontextualized back-to-the-basics professional entry tests for aspiring teachers. The chapter includes three case studies of the authors’ pedagogical practices that attempt to reframe conceptions of the literacy capabilities of pre-service teachers to reflect the complex and sophisticated requirements of teachers in contemporary schooling. The authors conclude the chapter with a discussion of the implications of these case studies as they illustrate the ways that pre-service teachers can be scaffolded and supported to develop creative capacity and critical awareness of the kinds of literacies required in the digital age despite restrictive regimes.

Cultural drivers of high performing knowledge-intensive service organisations

Organisational culture is considered an important influence on performance, particularly for service firms that rely on values-driven social controls to enhance human interactions (O’Reilly & Chatman, 1996). Using a qualitative approach, we show how the modified Organisational Culture Profile developed by Sarros, Gray, Densten, and Cooper (2005) to assess Australian organisations provides a framework for exploring the cultural drivers of high performing knowledge-intensive service firms in New Zealand. Our study provides rich insights into how six key cultural dimensions–competitiveness, innovation, performance orientation, emphasis on rewards, supportiveness and social responsibility–are translated into strategic human resource management practices.

On the security of PAS (predicate-based authentication service)

Recently a new human authentication scheme called PAS (predicate-based authentication service) was proposed, which does not require the assistance of any supplementary device. The main security claim of PAS is to resist passive adversaries who can observe the whole authentication session between the human user and the remote server. In this paper we show that PAS is insecure against both brute force attack and a probabilistic attack. In particular, we show that its security against brute force attack was strongly overestimated. Furthermore, we introduce a probabilistic attack, which can break part of the password even with a very small number of observed authentication sessions. Although the proposed attack cannot completely break the password, it can downgrade the PAS system to a much weaker system similar to common OTP (one-time password) systems.

On cloud computing service considerations for the small and medium enterprises

The concept of cloud computing services is appealing to the small and medium enterprises (SMEs), with the opportunity to acquire modern information technology resources as a utility and avoid costly capital investments in technology resources. However, the adoption of the cloud computing services presents significant challenges to the SMEs. The SMEs need to determine a path to adopting the cloud computing services that would ensure their sustainable presence in the cloud computing environment. Information about approaches to adopting the cloud computing services by the SMEs is fragmented. Through an interpretive design, we suggest that the SMEs need to have a strategic and incremental intent, understand their organizational structure, understand the external factors, consider the human resource capacity, and understand the value expectations from the cloud computing services to forge a successful path to adopting the cloud computing services. These factors would contribute to a model of cloud services for SMEs.

Residual stresses in rail-ends from the in-service insulated rail joints using neutron diffraction

Insulated rail joints (IRJs) are an integral part of the rail track signaling system and pose significant maintenance and replacement costs due to their low and fluctuating service lives. Failure occurs mainly in rail head region, bolt- holes of fishplates and web-holes of the rails. Propagation of cracks is influenced by the evolution of internal residual stresses in rails during rail manufacturing (hot-rolling, roller-straightening, and head-hardening process), and during service, particularly in heavy rail haul freight systems where loads are high. In this investigation, rail head accumulated residual stresses were analysed using neutron diffraction at the Australian Nuclear Science and Technology Organisation (ANSTO). Two ex-service two head-hardened rail joints damaged under different loading were examined and results were compared with those obtained from an unused rail joint reference sample in order to differentiate the stresses developed during rail manufacturing and stresses accumulated during rail service. Neutron diffraction analyses were carried out on the samples in longitudinal, transverse and vertical directions, and on 5mm thick sliceed samples cut by Electric Discharge Machining (EDM). For the rail joints from the service line, irrespective of loading conditions and in-service times, results revealed similar depth profiles of stress distribution. Evolution of residual stress fields in rails due to service was also accompanied by evidence of larger material flow based on reflected light and scanning electron microscopy studies. Stress evolution in the vicinity of rail ends was characterised by a compressive layer, approximately 5 mm deep, and a tension zone located approximately 5- 15mm below the surfaces. A significant variation of d0 with depth near the top surface was detected and was attributed to decarburization in the top layer induced by cold work. Stress distributions observed in longitudinal slices of the two different deformed rail samples were found to be similar. For the undeformed rail, the stress distributions obtained could be attributed to variations associated with thermo-mechanical history of the rail.

Generalized aggregate Quality of Service computation for composite services

This article addresses the problem of estimating the Quality of Service (QoS) of a composite service given the QoS of the services participating in the composition. Previous solutions to this problem impose restrictions on the topology of the orchestration models, limiting their applicability to well-structured orchestration models for example. This article lifts these restrictions by proposing a method for aggregate QoS computation that deals with more general types of unstructured orchestration models. The applicability and scalability of the proposed method are validated using a collection of models from industrial practice.

Aggregate quality of service computation for composite services

This paper addresses the problem of computing the aggregate QoS of a composite service given the QoS of the services participating in the composition. Previous solutions to this problem are restricted to composite services with well-structured orchestration models. Yet, in existing languages such as WS-BPEL and BPMN, orchestration models may be unstructured. This paper lifts this limitation by providing equations to compute the aggregate QoS for general types of irreducible unstructured regions in orchestration models. In conjunction with existing algorithms for decomposing business process models into single-entry-single-exit regions, these functions allow us to cover a larger set of orchestration models than existing QoS aggregation techniques.

An ontology-based service discovery approach for the provisioning of product-service bundles

More and more traditional manufacturing companies form or join inter-organizational networks to bundle their physical products with related services to offer superior value propositions to their customers. Some of these product-related services can be digitized completely and thus fully delivered electronically. Other services require the physical integration of external factors, but can still be coordinated electronically. In both cases companies and consumers face the problem of discovering appropriate product-related service offerings in the network or market. Based on ideas from the web service discovery discipline we propose a meet-in-the-middle approach between heavy-weight semantic technologies and simple boolean search to address this issue. Our approach is able to consider semantic relations in service descriptions and queries and thus delivers better results than syntax-based search. However – unlike most semantic approaches – it does not require the use of any formal language for semantic markup and thus requires less resources and skills for both service providers and consumers. To fully realize the potentials of the proposed approach a domain ontology is needed. In this research-in-progress paper we construct such an ontology for the domain of product-service bundles through analysis and synthesis of related work on service description. This will serve as an anchor for future research to iteratively improve and evaluate the ontology through collaborative design efforts and practical application.

Flexible service systems

Service science combines scientific, management, and engineering disciplines to improve the understanding of how service systems cooperate to create business value. Service systems are complex configurations of people, technologies, and resources that coexist in a common environment of service provisioning. While the general concepts of service science are understood and agreed upon, the representation of service systems using models is still in its infancy. In this chapter, we look at business processes and their role in properly representing service systems. We propose flexible process graphs, a high-level process modeling language, and extend it in order to specify service systems and their compositions within shared environments in a flexible way. The discussion in this chapter is the first step towards a formal description of service science environment, including service systems, networks, and whole ecology.

Optimization of complex QoS-aware service compositions

In Service-oriented Architectures, business processes can be realized by composing loosely coupled services. The problem of QoS-aware service composition is widely recognized in the literature. Existing approaches on computing an optimal solution to this problem tackle structured business processes, i.e., business processes which are composed of XOR-block, AND-block, and repeat loop orchestration components. As of yet, OR-block and unstructured orchestration components have not been sufficiently considered in the context of QoS-aware service composition. The work at hand addresses this shortcoming. An approach for computing an optimal solution to the service composition problem is proposed considering the structured orchestration components, such as AND/XOR/OR-block and repeat loop, as well as unstructured orchestration components.

Framework of a process laboratory for the operational control of service processes

Service processes such as financial advice, booking a business trip or conducting a consulting project have emerged as units of analysis of high interest for the business process and service management communities in practice and academia. While the transactional nature of production processes is relatively well understood and deployed, the less predictable and highly interactive nature of service processes still lacks in many areas appropriate methodological grounding. This paper proposes a framework of a process laboratory as a new IT artefact in order to facilitate the holistic analysis and simulation of such service processes. Using financial services as an example, it will be shown how such a process laboratory can be used to reduce the complexity of service process analysis and facilitate operational service process control.