Self-assembly of a halogenated molecule on oxide-passivated Cu(110)

The supramolecular self-assembly of brominated molecules was investigated and compared on Cu(110) and Cu(110)[BOND]O(2×1) surfaces under ultrahigh vacuum. By using scanning tunnelling microscopy, we show that brominated molecules form a disordered structure on Cu(110), whereas a well-ordered supramolecular network is observed on the Cu(110)[BOND]O(2×1) surface. The different adsorption behaviors of these two surfaces are described in terms of weakened molecule–substrate interactions on Cu(110)[BOND]O(2×1) as opposed to bare Cu(110). The effect of oxygen-passivation is to suppress debromination and it can be a convenient approach for investigating other self-assembly processes on copper-based substrates.

Crash risk perception of sleepy driving and its comparisons with drink driving and speeding: Which behavior is perceived as the riskiest?

- Objective Driver sleepiness is a major crash risk factor, but may be under-recognized as a risky driving behavior. Sleepy driving is usually rated as less of a road safety issue than more well-known risky driving behaviors, such as drink driving and speeding. The objective of this study was to compare perception of crash risk of sleepy driving, drink driving, and speeding. - Methods In total, 300 Australian drivers completed a questionnaire that assessed crash risk perceptions for sleepy driving, drink driving, and speeding. Additionally, the participants perception of crash risk was assessed for five different contextual scenarios that included different levels of sleepiness (low, high), driving duration (short, long), and time of day/circadian influences (afternoon, night-time) of driving. - Results The analysis confirmed that sleepy driving was considered a risky driving behavior, but not as risky as high levels of speeding (p < .05). Yet, the risk of crashing at 4 am was considered as equally risky as low levels of speeding (10 km over the limit). The comparisons of the contextual scenarios revealed driving scenarios that would arguably be perceived as quite risky due to time of day/circadian influences were not reported as high risk. - Conclusions The results suggest a lack of awareness or appreciation of circadian rhythm functioning, particularly the descending phase of circadian rhythm that promotes increased sleepiness in the afternoon and during the early hours of the morning. Yet, the results suggested an appreciation of the danger associated with long distance driving and driver sleepiness. Further efforts are required to improve the community’s awareness of the impairing effects from sleepiness and in particular, knowledge regarding the human circadian rhythm and the increased sleep propensity during the circadian nadir.

An experimental study on anisotropic mechanical properties of porcine thoracic aorta

Objective: To study the anisotropic mechanical properties of the thoracic aorta in porcine. Methods: Twenty-one porcine thoracic aortas were collected and categorized into three groups. The aortas were then cut through in their axial directions and expanded into two-dimensional planes. Then, by setting the length direction of the planar aortas (i.e., axial directions of the aortas) as 0°, each planar aorta was counterclockwisely cut into 8 samples with orientation of 30°, 45°, 60°, 90°, 120°, 135°, 150° and 180°, respectively. Finally, the uniaxial tensile tests were applied on three groups of samples at the loading rates of 1, 5 and 10 mm/min, respectively, to obtain the elastic modulus and ultimate stress of the aorta in different directions and at different loading rates. Results: The stress-strain curves exhibited different viscoelastic behaviors. With the increase of sample orientations, the elastic modulus gradually increased from 30°, reached the maximum value at 90°, and then gradually decreased till 180°. The variation trend of ultimate stress was similar to that of elastic modulus. Moreover, different loading rates showed a significant influence on the results of elastic modulus and ultimate stress, but a weak influence on the anisotropic degree. Conclusions: The porcine thoracic aorta is highly anisotropic. This research finding provides parameter references for assignment of material properties in finite element modeling, and is significant for understanding biomechanical properties of the arteries.

A multiscale study on the structural and mechanical properties of the luffa sponge from Luffa cylindrica plant

Cellular materials that are often observed in biological systems exhibit excellent mechanical properties at remarkably low densities. Luffa sponge is one of such materials with a complex interconnecting porous structure. In this paper, we studied the relationship between its structural and mechanical properties at different levels of its hierarchical organization from a single fiber to a segment of whole sponge. The tensile mechanical behaviors of three single fibers were examined by an Instron testing machine and the ultrastructure of a fractured single fiber was observed in a scanning electronic microscope. Moreover, the compressive mechanical behaviors of the foam-like blocks from different locations of the sponge were examined. The difference of the compressive stress-strain responses of four sets of segmental samples were also compared. The result shows that the single fiber is a porous composite material mainly consisting of cellulose fibrils and lignin/hemicellulose matrix, and its Young's modulus and strength are comparable to wood. The mechanical behavior of the block samples from the hoop wall is superior to that from the core part. Furthermore, it shows that the influence of the inner surface on the mechanical property of the segmental sample is stronger than that of the core part; in particular, the former's Young's modulus, strength and strain energy absorbed are about 1.6 times higher. The present work can improve our understanding of the structure-function relationship of the natural material, which may inspire fabrication of new biomimetic foams with desirable mechanical efficiency for further applications in anti-crushing devices and super-light sandwich panels.

Social skills, expectancies, and drinking in adolescents

Research in the field of teenage drinking behavior has shown relationships between both social skills and drinking and alcohol expectancies and drinking. The present research investigated the comparative power of both of these sets of variables in predicting teenage drinking behavior, as well as looking at the contribution of more global cognitive structures. It was hypothesised that adolescents with high alcohol involvement would be discriminated from those with low involvement on the basis of social skills, cognitive structures, and alcohol expectancies. Seven hundred thirty-two adolescents participated in the study. Results indicated that adolescent alcohol involvement was associated with social skills deficits, positive alcohol expectancies, and negative cognitive structures concerning parents and teachers. The results revealed that, although the bulk of the variance in drinking behavior was explained by the independent effects of social skills and expectancies, the interaction of the two constructs explained an additional and significant proportion of the variance. Implications for preventive and treatment programs are discussed.

Risk assessment of wandering behavior in mild dementia

Objective This prospective longitudinal study aims to determine the risk factors of wandering-related adverse consequences in community-dwelling persons with mild dementia. These adverse consequences include negative outcomes of wandering (falls, fractures, and injuries) and eloping behavior. Methods We recruited 143 dyads of persons with mild dementia and their caregivers from a veteran's hospital and memory clinic in Florida. Wandering-related adverse consequences were measured using the Revised Algase Wandering Scale – Community Version. Variables such as personality (Big Five Inventory), behavioral response to stress, gait, and balance (Tinetti Gait and Balance), wayfinding ability (Wayfinding Effectiveness Scale), and neurocognitive abilities (attention, cognition, memory, language/verbal skills, and executive functioning) were also measured. Bivariate and logistic regression analyses were performed to assess the predictors of these wandering-related adverse consequences. Results A total of 49% of the study participants had falls, fractures, and injuries due to wandering behavior, and 43.7% demonstrated eloping behaviors. Persistent walking (OR = 2.6) and poor gait (OR = 0.9) were significant predictors of negative outcomes of wandering, while persistent walking (OR = 13.2) and passivity (OR = 2.55) predicted eloping behavior. However, there were no correlations between wandering-related adverse consequences and participants' characteristics (age, gender, race, ethnicity, and education), health status (Charlson comorbidity index), or neurocognitive abilities. Conclusion Our results highlight the importance of identifying at-risk individuals so that effective interventions can be developed to reduce or prevent the adverse consequences of wandering.

Feeding mode of Australian infants in the first 12 months of life: An assessment against national breastfeeding indicators

Background: In 2011, Australia published a set of 6 population-level indicators assessing breastfeeding, formula use, and the introduction of soft/semisolid/solid foods. Objectives: This study aimed to report the feeding practices of Australian infants against these indicators and determine the predictors of early breastfeeding cessation and introduction of solids. Methods: Mother–infant dyads (N = 1470) were recruited postnatally in 2 Australian capital cities and regional areas of 1 state between February 2008 and March 2009. Demographic and feeding intention data were collected by self-completed questionnaire at infant birth, with feeding practices (current feeding mode, age of breastfeeding cessation, age of formula and/or solids introduction) reported when the infant was between 4 and 7 months of age, and around 13 months of age. Multiple logistic regression was used to determine the predictors of breastfeeding cessation and solids introduction. Results: Although initiation of breastfeeding was almost universal (93.3%), less than half of the infants were breastfed to 6 months (41.7%) and 33.3% were receiving solids by 4 months. Women who were socially disadvantaged, younger, less educated, unpartnered, primiparous, and/or overweight were most likely to have ceased breastfeeding before 6 months of age, and younger and/or less educated women were most likely to have introduced solid food by 4 months of age. Not producing adequate milk was the most common reason provided for cessation of breastfeeding. Conclusion: The feeding behaviors of Australian infants in the first 12 months fall well short of recommendations. Women need anticipatory guidance as to the indicators of breastfeeding success and the tendency of women to doubt the adequacy of their breast milk supply warrants further investigation.

Steel–concrete–steel sandwich system in Arctic offshore structure: Materials, experiments, and design

The gravity based structure (GBS) with external Steel–Concrete–Steel (SCS) sandwich ice-resistant wall has been developed for the Arctic oil and gas drilling. This paper firstly reported the experimental studies on the mechanical properties of steel and concretes under Arctic low temperature. With the test data, design equations were developed to incorporate the influences of the low temperature on these mechanical properties. Two types of Arctic GBS structure with flower-conical SCS sandwich shell type and plate type of ice-resistant wall have been developed for the Arctic offshore structure. Besides the studies on the materials, two SCS sandwich prototype shells and plates were, respectively, prepared and tested under patch loading that simulated the localized ice-contact pressure. The structural behaviors of the SCS sandwich structure under patch loading were reported and discussions were made on the influences of different parameters on the structural behavior of the structure. Analytical models were developed to predict the punching shear resistances of the SCS sandwich structure through modifying the code provisions. The accuracies of the developed analytical models were checked through validations against 27 tests in the literature. Corresponding design procedures on resistances of SCS sandwich structure were recommended based on these discussions and validations.

Mechanical performances of track-shaped rebar stiffened concrete-filled steel tubular (SCFRT) stub columns under axial compression

This paper presents a combined experimental, numerical, and theoretical study on the mechanical behaviors of track-shaped concrete-filled steel tubular (SCFRT) stub columns stiffened by rebars under compressive load. A total of 18 track-shaped concrete-filled steel tubular specimens including 12 specimens stiffened by rebars and 6 non-stiffened counterparts are tested, with consideration of parameters including flakiness ratio, concrete strength, and stiffeners. Failure pattern, bearing capacity, and ductility are all analyzed and discussed based on the experimental results. The numerical simulation by finite element (FE) software ABAQUS is also conducted. Based on both experimental and numerical results, theoretical formula to predict the load-bearing capacity of SCFRT stub columns subjected to axial compression loading is established according to the superposition principle of ultimate load-bearing capacity with rational simplification. The proposed theoretical method provides accurate predictions on the load bearing capacity by comparing with experimental results from 18 groups of specimens.

Systematic analysis of changes in cannabis use among participants in control conditions of randomised controlled trials

Introduction Cannabis remains the most used illegal substance across the globe, and negative outcomes and disorders are common. A spotlight therefore falls on reductions in cannabis use in people with cannabis use disorder. Current estimates of unassisted cessation or reduction in cannabis use rely on community surveys, and few studies focus on individuals with disorder. A key interest of services and researchers is to estimate effect size of reductions in consumption among treatment seekers who do not obtain treatment. Effects within waiting list or information-only control conditions of randomised controlled trials offer an opportunity to study this question. Method This paper examines the extent of reductions in days of cannabis use in the control groups of randomised controlled trials on treatment of cannabis use disorders. A systematic literature search was performed to identify trials that reported days of cannabis use in the previous 30 (or equivalent). Results Since all but one of the eight identified studies had delayed treatment controls, results could only be summarised across 2–4 months. Average weighted days of use in the previous 30 days fell from 24.5 to 19.9, and a meta-analysis using a random effects model showed an average reduction of 0.442 SD. However, every study had at least one significant methodological issue. Conclusions While further high-quality data is needed to confirm the observed effects, these results provide a baseline from which researchers and practitioners can estimate the extent of change required to detect effects of cannabis treatments in services or treatment trials.

Can exploring natural recovery from substance misuse in psychosis assist with treatment? A review of current research

Substance misuse in people with psychosis presents significant problems, but trials of treatments to address it show little sustained advantage over control conditions. An examination of mechanisms underpinning unassisted improvements may assist in the refinement of co-morbidity treatments. This study reviewed existing research on natural recovery from substance misuse in people with psychosis. To address this issue, a systematic search identified only 7 articles that fulfilled the criteria. Their results suggest that people with psychosis report similar reasons to change as do non-psychotic groups, although they did not clarify whether the relative frequencies or priority orders were the same. Differences involved issues relating to the disorder and the functional problems faced by this group: receipt of treatment for mental health difficulties, worsening of mental health difficulties, and homelessness. The current research on reasons for change in people with psychosis is sparse and has significant limitations, and as yet it offers little inspiration for new treatments. A more fertile source may prove to be a detailed investigation of successful substance control strategies that are used in self-management by this group.

Loyalty (Brand Loyalty)

Loyalty is a desired marketing outcome for products ranging from fast-moving consumer goods, services, durables, and ideas products such as political parties and social behaviors. Evidence has shown that a base of loyal customers is advantageous for an organization as it reduces the marketing cost of doing business and improves profitability. The approaches to loyalty have varied over the decades with various schools of thoughts toward definitions, conceptualizations, and measurement. The need for understanding the nature of the product and consumer's behavior to determine the appropriate approach to loyalty is emphasized in this article. In this article, we outline the historical development of brand loyalty, the major approaches to the construct (attitudinal and behavioral) and new approaches that deconstruct attitudinal loyalty into its subcomponent parts.

The development and preliminary testing of an instrument for assessing fatigue self-management outcomes in patients with advanced cancer

Background: Fatigue is one of the most distressing and commonly experienced symptoms in patients with advanced cancer. Although the self-management (SM) of cancer-related symptoms has received increasing attention, no research instrument assessing fatigue SM outcomes for patients with advanced cancer is available. Objectives: to describe the development and preliminary testing of an interviewer administered instrument for assessing the frequency, and perceived levels of effectiveness and self-efficacy associated with fatigue SM behaviors in patients with advanced cancer. Methods: The development and testing of the Self-efficacy in Managing Symptoms Scale- Fatigue Subscale for Patients with Advanced Cancer (SMSFS-A) involved a number of procedures: item-generation using a comprehensive literature review and semi-structured interviews, content validity evaluation using expert panel reviews, and face validity and test-retest reliability evaluation using pilot testing. Results: Initially, 23 items (22 specific behaviors with one global item) were generated from the literature review and semi-structured interviews. After two rounds of expert panel review, the final scale was reduced to 17 items (16 behaviors with one global item). Participants in the pilot test (n=10) confirmed that the questions in this scale were clear and easy to understand. Bland-Altman analysis showed agreement of results over a one-week interval. Conclusions: The SMSFS-A items were generated using multiple sources. This tool demonstrated preliminary validity and reliability. Implications for practice: The SMSFS-A has the potential to be used for clinical and research purposes. Nurses can use this instrument for collecting data to inform the initiation of appropriate fatigue SM support for this population.

Ambidextrous leadership and team innovation

Purpose The purpose of this paper is to report the first empirical test of the recently proposed ambidexterity theory of leadership for innovation (Rosing et al., 2011). This theory proposes that the interaction between two complementary leadership behaviors – opening and closing – predicts team innovation, such that team innovation is highest when both opening and closing leadership behaviors are high. Design/methodology/approach Multi-source survey data came from 33 team leaders of architectural and interior design firms and 90 of their employees. Findings Results supported the interaction hypothesis, even after controlling for leaders’ transformational leadership behavior and general team success. Research limitations/implications The relatively small sample size and the cross-sectional design are potential limitations of the study. The findings provide initial support for the central hypothesis of the ambidexterity theory of leadership for innovation. Practical implications The results suggest that organizations could train team leaders’ ambidextrous leadership behaviors to increase team innovation. Social implications Identifying ways to facilitate organizational innovation is important, as it contributes to employment and company growth as well as individual and societal well-being. Originality/value This multi-source study contributes to the literatures on leadership and innovation in organizations by showing that ambidextrous leadership behaviors predict team innovation above and beyond transformational leadership behavior.

Leaders' personal wisdom and leader-member exchange quality: The role of individualized consideration

Business scholars have recently proposed that the virtue of personal wisdom may predict leadership behaviors and the quality of leader–follower relationships. This study investigated relationships among leaders’ personal wisdom—defined as the integration of advanced cognitive, reflective, and affective personality characteristics (Ardelt, Hum Dev 47:257–285, 2004)—transformational leadership behaviors, and leader–member exchange (LMX) quality. It was hypothesized that leaders’ personal wisdom positively predicts LMX quality and that intellectual stimulation and individualized consideration, two dimensions of transformational leadership, mediate this relationship. Data came from 75 religious leaders and 1–3 employees of each leader (N = 158). Results showed that leaders’ personal wisdom had a positive indirect effect on follower ratings of LMX quality through individualized consideration, even after controlling for Big Five personality traits, emotional intelligence, and narcissism. In contrast, intellectual stimulation and the other two dimensions of transformational leadership (idealized influence and inspirational motivation) did not mediate the positive relationship between leaders’ personal wisdom and LMX quality. Implications for future research on personal wisdom and leadership are discussed, and some tentative suggestions for leadership development are outlined.