Loading of a very tall building in a simulated downburst wind field

Thunderstorm downbursts are important for wind engineers as they have been shown to produce the design wind speeds for mid to high return periods in many regions of Australia [1]. In structural design codes (e.g. AS/NZS1170.02-02) an atmospheric boundary layer (ABL) is assumed, and a vertical profile is interpolated from recorded 10 m wind speeds. The ABL assumption is however inaccurate when considering the complex structure of a thunderstorm outflow, and its effects on engineered structures. Several researchers have shown that the downburst, close to its point of divergence is better represented by an impinging wall jet profile than the traditional ABL. Physical modelling is the generally accepted approach to estimate wind loads on structures and it is therefore important to physically model the thunderstorm downburst so that its effects on engineered structures may be studied. An advancement on the simple impinging jet theory, addressed here is the addition of a pulsing mechanism to the jet which allows not only the divergent characteristics of a downburst to be produced, but also it allows the associated leading ring vortex to be developed. The ring vortex modelling is considered very important for structural design as it is within the horizontal vortex that the largest velocities occur [2]. This paper discusses the flow field produced by a pulsed wall jet, and also discusses the induced pressures that this type of flow has on a scaled tall building.

Thermophoretic control of building units in the plasma-assisted deposition of nanostructured carbon films

The role of the plasma-grown nanoparticles in the plasma-enhanced chemical vapor deposition (PECVD) of the nanostructured carbon-based films was investigated. The samples were grown in the low-pressure rf plasmas of CH 4+H2+Ar gas mixtures. The enhanced deposition of the building units from the gas phase was found to support the formation of polymorphous nanostructured carbon films. The results reveal the crucial role played by the thermophoretic force in controlling the deposition of the plasma-grown fine particles.

Plasma-aided nanofabrication: "plasma-building block" approach

Unique features and benefits of the plasma-aided nanofabrication are considered by using the "plasma-building block" approach, which is based on plasma diagnostics and nanofilm characterization, cross-referenced by numerical simulation of generation and dynamics of building blocks in the gas phase, their interaction with nanostructured surfaces, and ab initio simulation of chemical structure of relevant nanoassemblies. The examples include carbon nanotip microemitter structures, semiconductor quantum dots and nanowires synthesized in the integrated plasma-aided nanofabrication facility.

Nanofabrication of single-crystalline flat-panel display microemitters : a plasma-building unit approach

This contribution is focused on plasma-enhanced chemical vapor deposition systems and their unique features that make them particularly attractive for nanofabrication of flat panel display microemitter arrays based on ordered patterns of single-crystalline carbon nanotip structures. The fundamentals of the plasma-based nanofabrication of carbon nanotips and some other important nanofilms and nanostructures are examined. Specific features, challenges, and potential benefits of using the plasma-based systems for relevant nanofabrication processes are analyzed within the framework of the "plasma-building unit" approach that builds up on extensive experimental data on plasma diagnostics and nanofilm/nanostructure characterization, and numerical simulation of the species composition in the ionized gas phase (multicomponent fluid models), ion dynamics and interaction with ordered carbon nanotip patterns, and ab initio computations of chemical structure of single crystalline carbon nanotips. This generic approach is also applicable for nanoscale assembly of various carbon nanostructures, semiconductor quantum dot structures, and nano-crystalline bioceramics. Special attention is paid to most efficient control strategies of the main plasma-generated building units both in the ionized gas phase and on nanostructured deposition surfaces. The issues of tailoring the reactive plasma environments and development of versatile plasma nanofabrication facilities are also discussed.

Reducing building information fragmentation : a BIM-specifications approach

The world of Construction is changing, so too are the expectations of stakeholders regarding strategies for adapting existing resources (people, equipment and finances), processes and tools to the evolving needs of the industry. Building Information Modelling (BIM) is a data-rich, digital approach for representing building information required for design and construction. BIM tools play a crucial role and are instrumental to current approaches, by industry stakeholders, aimed at harnessing the power of a single information repository for improved project delivery and maintenance. Yet, building specifications - which document information on material quality, and workmanship requirements - remain distinctly separate from model information typically represented in BIM models. BIM adoption for building design, construction and maintenance is an industry-wide strategy aimed at addressing such concerns about information fragmentation. However, to effectively reduce inefficiencies due to fragmentation, BIM models require crucial building information contained in specifications. This paper profiles some specification tools which have been used in industry as a means of bridging the BIM-Specifications divide. We analyse the distinction between current attempts at integrating BIM and specifications and our approach which utilizes rich specification information embedded within objects in a product library as a method for improving the quality of information contained in BIM objects at various levels of model development.

How should future building structure and emergency response cope with bushfire attack?

Bushfires are regular occurrences in the Australian landscape which can, under adverse weather conditions, give rise to losses of life, property, infrastructure, environmental and cultural values. Where property loss is involved, historical surveys of house losses have focussed on ember, radiant heat and flame contact as key bushfire attack mechanisms. Although often noted, little work has been done to quantify the impact of fire generated or fire enhanced wind and pyro-convective events on house loss and to improve construction practice within Australia. It is well known that strong winds are always associated with bushfire events. It is less well known, although increasingly shown through anecdotal evidence, that bushfires are not a passive companion of wind, but indeed they interact with winds and can together cause significant damages to exposed buildings and ecological structures. Previous studies have revealed the effects of wind, fire and structure interactions with the result of increased pressure coefficient distributions on the windward side of a building downstream of a fire front. This paper presents a further analysis of the result in relations to the relevant standards and fire weather conditions. A review of wind code and bushfire code was conducted. Based on the result of the current study, the authors believe it is necessary to consider wind as an attack mechanism in bushfire events. The results of the study will also have implications on bushfire emergency management, design of emergency shelters, perception of danger, emergency evacuation and on risk assessment.

The Researcher Librarian Partnership : building a culture of research

Increasingly, the library and information science (LIS) practitioner is being challenged to incorporate research into the context of their professional work. This paper reports on the Researcher-Librarian Partnership, a research-mentoring program that was initiated by the International Federation of the Library Association and Institutions. Six new LIS practitioners within their first seven years of professional practice took part in the program. Each was partnered with an experienced LIS researcher who provided mentoring and support. During the 12-month program the new professionals designed and implemented a research project on a topic of interest. This paper outlines the details of the program providing observations on how research mentoring can be a powerful way to ensure all stakeholders – practitioners, educators and professional associations – can plan an active role in supporting the development of a research culture within the profession.

Building the youth sector from the bottom up : case studies from the Queensland CPLAN Initiative 2012-2013

As part of YANQ's decentralisation across the state, YANQ have set up 10 Networks across Queensland, with Facilitators based in each of the regions. We encourage you to get in contact with your local Facilitator if you would like to have input on Workforce Development or youth policy issues. CPLANs aim to create an ongoing and sustainable structure across ten regions in Queensland to support a consistent focus on: ⋅ Policy issues relevant to young people; and ⋅ Workforce development strategies for the youth sector from a local, regional and state perspective. The ten CPLANs fall under the existing structure of YANQ and utlise and lever off the comprehensive network of youth inter-­‐agencies and networks across the state. The ten CPLANs are made up of representatives from the youth sector in each region who have an interest in contributing to policy development and workforce issues.

Solid-state assemblies and optical properties of conjugated oligomers combining fluorene and thiophene units

Two conjugated oligomers, representing elementary segments of fluorene-thiophene copolymers, are compared in terms of the microscopic morphology and the optical properties of thin deposits. The atomic force microscopy morphological data and the solid-state absorption and emission spectra are interpreted in terms of the assembly of the conjugated molecules. The compound with a terthiophene central unit and fluorene end-groups shows well-defined monolayer-by-monolayer assembly into micrometer-long stripe-like structures, with a crystalline herringbone-type organization within the monolayers. Polarized confocal microscopy indicates a strong orientation of the crystalline domains within the stripes. In contrast, the compound with a terfluorene central unit and thiophene end groups forms no textured aggregates and the optical spectra in the solid-state are very similar to those recorded in solution, suggesting that the molecules interact only weakly in the solid. The difference in behaviour between the two compounds most probably originates from their different capability to form densely-packed assemblies of interacting π-systems.

Building macroscale models from microscale probabilistic models : a general probabilistic approach for nonlinear diffusion and multispecies phenomena

A discrete agent-based model on a periodic lattice of arbitrary dimension is considered. Agents move to nearest-neighbor sites by a motility mechanism accounting for general interactions, which may include volume exclusion. The partial differential equation describing the average occupancy of the agent population is derived systematically. A diffusion equation arises for all types of interactions and is nonlinear except for the simplest interactions. In addition, multiple species of interacting subpopulations give rise to an advection-diffusion equation for each subpopulation. This work extends and generalizes previous specific results, providing a construction method for determining the transport coefficients in terms of a single conditional transition probability, which depends on the occupancy of sites in an influence region. These coefficients characterize the diffusion of agents in a crowded environment in biological and physical processes.

Building the science and innovation base: work, skills and employment issues

This Special Issue of New Technology, Work and Employment has been prompted by the increasing awareness in many countries of the need to maintain and grow their science and innovation base. The development of science, engineering, technology and mathematics (STEM) skills and capacity is seen as vital for economic development and prosperity through its impact on national and regional research and development (R&D), technological advancement, and innovation potential.

Human resource management and entrepreneurship : building theory at the intersection

In 2008 we brought together much work at the intersection of entrepreneurship and human resource management (HRM) (Barrett & Mayson, 2008), after calls for more research (Baron, 2003; Katz, Aldrich, Welbourne & Williams, 2000; Tansky & Heneman, 2003). More has been collated since (Soriano, Dobon & Tansky, 2010; Tansky, Soriano & Dobon, 2010). We think it is now time again to regroup, pull conversational threads together and have a critical look at recent research at the intersection of HRM and Entrepreneurship. As editors of International Handbook of Entrepreneurship and HRM (Barrett & Mayson, 2008) we were privileged to collect 23 wonderfully diverse chapters from scholars around the globe addressing a range of issues at the intersection of the two pertinent disciplines or fields: HRM and entrepreneurship. This edition represented a coalescing of ideas that had been swirling about for some time. In three sections, the first dealt with theory and research methods, the second with the nature of HRM in small and entrepreneurial firms and the third with the functional aspects of HRM. At the time we were aware that the handbook did not cover the entire field and many topics were left unexplored. For example, the topic of regulation was generally absent while issues such as career advancement, performance management, organisational change and gender, diversity and ethnicity were also missing. In essence, the majority of those contributions sought to develop an understanding of the context in which particular aspects of HRM can be played out.

Building communities through co-creative storytelling : sound walking in New England

The Story Project is a small, not-for-profit community media arts company based on the Sunshine Coast hinterland. It specialises in facilitating first-person storytelling. Since 2012 The Story Project has been collaborating with a small community arts organisation based in northern NSW, Uralla Arts, to record local heritage in first-person story form and to curate and present it ways that will appeal to new generations of listeners. The initial collaboration was funded by a Federal government Community Heritage program. The project successfully adapted a participatory method of life storytelling to this regional context and some 40 stories were contributed to a collection. A more ambitious suite of projects to develop soundwalks in a number of towns across the New England region has since grown from this initial collaboration. The soundwalks seek to combine local creative works in oral story, music and visual forms, and make them accessible through an application that can be downloaded to GPS-enabled mobile devices. While soundwalks are not new, the needs and challenges of creative community-building that New England soundwalks attempt to solve in this regional setting hold value for a broader range of interests than just those of the immediate project stakeholders. This paper reports on a research collaboration between The Story Project and QUT researchers that looked at The Story Project’s engagement with Uralla Arts and other New England community-based networks and organisations. It considers how this instance of story-centred, participatory media arts practice contributes to building population-wide capacity for creative expression.

The role of the Saudi government and the Saudi building code in implementing sustainable housing construction in Saudi Arabia

The housing construction industry in Saudi Arabia has been booming rapidly in the past two decades. This boom has faced multiple downfalls in relation to government regulations and building codes, one of which is the application of sustainable methods to the housing construction. This paper sheds some light on the current role of the Saudi government and the role of the Saudi Building Code (SBC) in the housing construction industry. The methodology utilised in this paper was a Delphi survey that was distributed to twenty-five key stakeholders in the housing construction industry in Saudi Arabia. The results indicate that there is a lack of integration between the Saudi Building Code and the current construction methods used in the current construction industry. Some factors and elements are recommended to be incorporated into the Saudi Building Code and to be adopted as regulations in the Saudi housing construction industry.

Building a community of learners within the STEM higher education classroom

Building rich and authentic learning experiences in the STEM classroom, is a challenge for many educators within Higher Education. While many Higher Education Institutions have embraced the need to transform current teaching and learning practices and include a range of online tools, this has often been met with some resistance and approaches that do not always recognise the academic who are a critical component to the success of the transformational process. Over the last decade the Internet has evolved from being a tool used by a few dedicated educators to one that is being used by the majority of educators. However, what is important is how this great resource is used in teaching and learning to allow students to build knowledge. The ability for students to construct knowledge and engage in higher order thinking skills is at the heart of educational practices, and building a community of learners has the potential to support these practices, especially within STEM education. This paper explores the relationship between students and an academic teaching in a technology rich STEM learning environment and their adoption of social community and shared tools. In particular the paper reports on the critical components that make a successful community of learners and the educational tools and approaches that were successfully used to enhance the student learning experience in a STEM classroom.