(Digital library) education or (digital) library education? An Australian perspective

Education for Library and Information professionals in the digital environment has been an important discussion point the world over. However, before designing and implementing a programme for digital library education, it is prudent that the skills and knowledge required to work in this environment are identified to enable informed decisions to be made. Hitherto, there has been very little research which has sought the opinion of both educators and practitioners on this topic, and none with a wide geographical coverage of Australia. This paper presents the key findings of research undertaken at Tallinn University in the first half of 2009.

Geography and international assessment: Opportunity or distraction

Assessments of students in primary and secondary education are debated among practitioners, policy-makers, and parents. In some countries, assessment scores serve a criterion for passage between levels of education, for example, from secondary school to post-secondary education. Those practices are often traditions and while they come under criticism, they are a long-accepted part of the educational practices within a country. In those countries, the students’ assessment and examination scores are posted in public places or published in local news media. In other countries, assessments are used for the periodic checks on individual student progress. The results of assessments may be used for rating schools, and in some cases, they are used for evaluating the performance of teachers. Assessments are used less often to analyze student performance and make judgments regarding the performance of the curriculum. Even less often, assessments serve to critically establish strategies for the improvement of student learning and educational practices. The ends on the continuum of the assessment debate often focus on the opportunities that assessments present to improve education on one end. The other end is that assessments serve as a major distraction from the important work of teachers by removing classroom room time from instruction. The debate on those issues continues.

Bringing the farmer perspective to agricultural robots

The research reported in this paper explores autonomous technologies for agricultural farming application and is focused on the development of multiple-cooperative agricultural robots (AgBots). These are highly autonomous, small, lightweight, and unmanned machines that operate cooperatively (as opposed to a traditional single heavy machine) and are suited to work on broadacre land (large-scale crop operations on land parcels greater than 4,000m2). Since this is a new, and potentially disruptive technology, little is yet known about farmer attitudes towards robots, how robots might be incorporated into current farming practice, and how best to marry the capability of the robot with the work of the farmer. This paper reports preliminary insights (with a focus on farmer-robot control) gathered from field visits and contextual interviews with farmers, and contributes knowledge that will enable further work toward the design and application of agricultural robotics.

Effect of constitutive material models on seismic response of two-story reinforced concrete frame

This paper focuses on the finite element (FE) response sensitivity and reliability analyses considering smooth constitutive material models. A reinforced concrete frame is modeled for FE sensitivity analysis followed by direct differentiation method under both static and dynamic load cases. Later, the reliability analysis is performed to predict the seismic behavior of the frame. Displacement sensitivity discontinuities are observed along the pseudo-time axis using non-smooth concrete and reinforcing steel model under quasi-static loading. However, the smooth materials show continuity in response sensitivity at elastic to plastic transition points. The normalized sensitivity results are also used to measure the relative importance of the material parameters on the structural responses. In FE reliability analysis, the influence of smoothness behavior of reinforcing steel is carefully noticed. More efficient and reasonable reliability estimation can be achieved by using smooth material model compare with bilinear material constitutive model.

4.2.5 Environmental engineering

Th is landmark report on engineering and development is the fi rst of its kind to be produced by UNESCO, or indeed by any international organization. Containing highly informative and insightful contributions from 120 experts from all over the world, the report gives a new perspective on the very great importance of the engineer’s role in development. Advances in engineering have been central to human progress ever since the invention of the wheel. In the past hundred and fi fty years in particular, engineering and technology have transformed the world we live in, contributing to signifi cantly longer life expectancy and enhanced quality of life for large numbers of the world’s population. Yet improved healthcare, housing, nutrition, transport, communications, and the many other benefi ts engineering brings are distributed unevenly throughout the world. Millions of people do not have clean drinking water and proper sanitation, they do not have access to a medical centre, they may travel many miles on foot along unmade tracks every day to get to work or school...

Taking care of business: Tony Abbott and the Trans-Pacific Partnership

After the Australian election, United States President Barack Obama called newly elected Australian Prime Minister Tony Abbott to congratulate him upon his victory and encourage him to work co-operatively on the regional trade deal the Trans-Pacific Partnership.

[await full-text]Evaluation of QAS Workplace Health and Safety Action Plan

This report identifies the outcomes of a program evaluation of the five year Workplace Health and Safety Strategy (2012-2017), specifically, the engagement component within the Queensland Ambulance Service. As part of the former Department of Community Safety, their objective was to work towards harmonising the occupational health and safety policies and process to improve the workplace culture. The report examines and assess the process paths and resource inputs into the strategy, provides feedback on progress to achieving identified goals as well as identify opportunities for improvements and barriers to progress. Consultations were held with key stakeholders within QAS and focus groups were facilitated with managers and health and safety representatives of each Local Area Service Network.

The importance of group-fit in new director selection

Purpose Director selection is an important yet under-researched topic. The purpose of this paper is to contribute to extant literature by gaining a greater understanding into how and why new board members are recruited. Design/methodology/approach This exploratory study uses in-depth interviews with Australian non-executive directors to identify what selection criteria are deemed most important when selecting new director candidates and how selection practices vary between organisations. Findings The findings indicate that appointments to the board are based on two key attributes: first, the candidates’ ability to contribute complementary skills and second, the candidates’ ability to work well with the existing board. Despite commonality in these broad criteria, board selection approaches vary considerably between organisations. As a result, some boards do not adequately assess both criteria when appointing a new director hence increasing the chance of a mis-fit between the position and the appointed director. Research limitations/implications The study highlights the importance of both individual technical capabilities and social compatibility in director selections. The authors introduce a new perspective through which future research may consider director selection: fit. Originality/value The in-depth analysis of the director selection process highlights some less obvious and more nuanced issues surrounding directors’ appointment to the board. Recurrent patterns indicate the need for both technical and social considerations. Hence the study is a first step in synthesising the current literature and illustrates the need for a multi-theoretical approach in future director selection research.

Working the story : News curation in social media as a second save of citizen journalism

For the first decade of its existence, the concept of citizen journalism has described an approach which was seen as a broadening of the participant base in journalistic processes, but still involved only a comparatively small subset of overall society – for the most part, citizen journalists were news enthusiasts and “political junkies” (Coleman, 2006) who, as some exasperated professional journalists put it, “wouldn’t get a job at a real newspaper” (The Australian, 2007), but nonetheless followed many of the same journalistic principles. The investment – if not of money, then at least of time and effort – involved in setting up a blog or participating in a citizen journalism Website remained substantial enough to prevent the majority of Internet users from engaging in citizen journalist activities to any significant extent; what emerged in the form of news blogs and citizen journalism sites was a new online elite which for some time challenged the hegemony of the existing journalistic elite, but gradually also merged with it. The mass adoption of next-generation social media platforms such as Facebook and Twitter, however, has led to the emergence of a new wave of quasi-journalistic user activities which now much more closely resemble the “random acts of journalism” which JD Lasica envisaged in 2003. Social media are not exclusively or even predominantly used for citizen journalism; instead, citizen journalism is now simply a by-product of user communities engaging in exchanges about the topics which interest them, or tracking emerging stories and events as they happen. Such platforms – and especially Twitter with its system of ad hoc hashtags that enable the rapid exchange of information about issues of interest – provide spaces for users to come together to “work the story” through a process of collaborative gatewatching (Bruns, 2005), content curation, and information evaluation which takes place in real time and brings together everyday users, domain experts, journalists, and potentially even the subjects of the story themselves. Compared to the spaces of news blogs and citizen journalism sites, but also of conventional online news Websites, which are controlled by their respective operators and inherently position user engagement as a secondary activity to content publication, these social media spaces are centred around user interaction, providing a third-party space in which everyday as well as institutional users, laypeople as well as experts converge without being able to control the exchange. Drawing on a number of recent examples, this article will argue that this results in a new dynamic of interaction and enables the emergence of a more broadly-based, decentralised, second wave of citizen engagement in journalistic processes.

El Aprendizaje Informado

Welcome to Informed Learning. If you have opened this book, it is probably because you are interested in how people learn. It may also be because you are interested in how learners interact with their information environment and would like to help them do so in ways that help them learn better. What should we teach and how, so that our students will use information successfully, creatively and responsibly in their journey as lifelong learners? Informed learning provides a unique perspective on helping students become successful learners in our rapidly evolving information environments. It presents a new framework for informed learning, that will enable teachers, librarians, researchers and teacher-researchers to work together as they continue to respond to the need to help students use information to learn. Do you want to help your students engage with the information practices of their discipline or chosen profession? Are you looking for ideas to invigorate and refresh your curriculum? Are you looking for ways to help your students write better essays or search the internet more successfully? Are you looking for strategies to enhance your research supervision? Are you trying to discover how information literacy and information literacy education can contribute to academic curriculum? Informed Learning can help you. Informed learning is using information, creatively and reflectively, in order to learn. It is learning that draws on the different ways in which we use information in academic, professional and community life; and it is learning that draws on emerging understanding of our varied experiences of using information to learn. Indeed, we cannot learn without using information. It is problemetising the interdependence between information use and learning that is the foundation of this book. Most of the time we take for granted that aspect of learning which we call information use. What might happen to the learning experience if we attend to it? Informed Learning examines research into the experience of using information to learn in academic, workplace and community contexts, that can be used to inform learning and learning design at many levels. It draws on contemporary higher education teaching and learning theory to suggest ways forward for a learning agenda that values the need for engaging with the wider world of information. In doing so, it offers a new and unified framework for implementing curriculum that recognises the importance of successful, creative and reflective information use as a strategy for learning as well as a learning outcome; and proposes a research agenda that will continue to inform learning. Informed Learning reconceptualises information literacy as being about engaging in information practices in order to learn; engaging with the different ways of using information to learn. Based on the author’s work in developing the seven faces of information literacy, it proposes the need for teaching and learning to 1) bring about new ways of experiencing and using information, and 2) engage students with those information practices relevant to their discipline or profession. This book is written for a diverse audience of educators from many disciplines, curriculum designers, researchers, and administrators. While this book both establishes a new approach to learning design and an associated research agenda, it is also intended to be practical. I have sought to ground the ideas in practice through: • using Steve and Jane as academics from different disciplines on a journey; experiencing the implementation of informed learning; • using examples from the literature and personal experience; • using reflective questions towards the end of each chapter. In this book you will find many examples of how people experience information use as they go about learning in different contexts. The research reported here shows that as people go about learning they interact with information in different ways. They may be learning about a content area in a formal context, they may be engaged in informal learning as they go about their everyday work, or they may be learning through doing original research. The emphasis on experience and ways of seeing comes from the work of researchers into student learning such as Ference Marton, Paul Ramsden, Shirley Booth, Michael Prosser, Keith Trigwell and others who have shown that, if we are to help students learn, we must first be aware of how they experience those aspects of the world about which they are learning. Different ways of reading this book The first three chapters of this book establish the broad theoretical framework for informed learning; and the remaining chapters consider the out workings of this in a range of contexts. If you want to browse the general directions of this book, read the narratives at the start of each chapter. If you want to see how the book might influence your practice, read the narratives and the reflective questions at the end of each chapter. If you want to help your students become informed learners in their discipline or profession, focus on chapters one, two, three and five. If you are looking for help with students engaged in information practices such as internet searching or essay writing, focus on chapters one, three and four. If you are interested in informed learning in the community or workplace, focus on chapters one, two, three and six. If you want to help your research students become informed learners, focus on chapters one, two, three, seven and eight. If you are working with colleagues to promote information literacy education and are looking for ideas, read chapter nine. If you are interested in researching informed learning read chapter ten

Comparison of silicate-substituted calcium phosphate (Actifuse®) with rhBMP-2 (Infuse®) in posterolateral instrumented lumbar fusion

Study Design This was a randomised controlled trial in patients with degenerative disc disease (DDD) who underwent instrumented posterolateral lumbar fusion (PLF) surgery. Objective The aim of this study was to assess the efficacy of the bone grafting substitute, silicate-substituted calcium phosphate (SiCaP) compared with bone morphogenetic protein (rhBMP-2) and to evaluate clinical outcomes over a period of two years. Methods Patients undergoing PLF surgery for DDD at a single centre were recruited and randomised to one of two groups; SiCaP (n=9) or rhBMP-2 (n=10). One patient withdrew prior to randomisation and another from the rhBMP-2 group after randomisation. The radiological and clinical outcomes were examined and compared. Fusion was assessed at 12 months with computed tomography (CT) and plain radiographs. Clinical outcomes were evaluated by recording measures of pain, quality of life, disability and neurological status from six weeks to two years postoperatively. Results In the SiCaP and rhBMP-2 groups, fusion was observed in 9/9 and 8/9 patients respectively. Pain and disability scores were reduced and quality of life increased in both groups. Leg pain, disability and satisfaction scores were similar between the groups at each postoperative time point, however, back pain was less at six weeks and quality of life was higher at six months in the SiCaP group than the rhBMP-2 group. Conclusions SiCaP and rhBMP-2 were comparable in terms of achieving successful bone growth and fusion. Both groups similarly alleviated pain and improved quality of life, neurological, satisfaction and return to work outcomes following PLF surgery.

Warmwaters

This project originated from both investigation of the musicalisation of theatre and impact of gender upon contemporary physical comedy. Developed as a ‘music first’ proposition, the initial experiment was to blend music and theatre so they were indistinguishable. Musicalising theatre, and theatricalising music. This established a covert intermediality with the potential to work in theatre or music venues. An iterative cycle of writing, performance, and videography over two years in venues ranging from small cafes to Woodford Folk Festival resulted in a full-length performance premiering at Brisbane Powerhouse’s Queensland Cabaret Festival 2015. The soundtrack to the show was recorded as a full-length album at QUT’s Gasworks Studio and released in 2014. It’s become clear that male/female musical comedy acts are an extremely rare pairing. Certain preconceptions about gender and comedy complicate the field; indeed the comic tropes of the double act which the Warmwaters flow around and through. Brian Logan (2011) even poses that “the male-female dynamic militate[s] against comedy”. This performance-led research draws on Comedy Studies to examine three classic formulations of the comic duo as they are manifested at critical incidents in the Warmwaters’ show. These moments are examined in terms of comic functionality and gender, evaluating and potentially reformulating them, whilst working towards a better understanding of the relative scarcity of the male/female musical comedy duo. Prototypes have been performed in various venues, utilising performance as research: cycles in which discoveries made during unpredictable gigs in music venues are captured on video, transcribed, rewritten, then fed back into live performance.

Negotiating Chineseness through learning Chinese as a Heritage Language in Australia: The role of habitus

While education researchers have drawn on the work of a wide diversity of theorists over the years, much contemporary theory building in these areas has revolved around the work of Pierre Bourdieu. Theory as Method in Research develops the capacity of students, researchers and teachers to successfully put Bourdieu’s ideas to work in their own research and prepare them effectively for conducting Masters and Doctoral scholarships. Structured around four core themes, this book provides a range of research case studies exploring educational identities, educational inequalities, school leadership and management, and research in teacher education. Issues as diverse as Chinese language learning and identity, school leadership in Australia and the school experience of Afro-Trinidadian boys, are covered, intertwined with a set of innovative approaches to theory application in education research. This collection brings together, in one comprehensive volume, a set of education researchers who place Pierre Bourdieu’s key concepts such as habitus, capital and field at the centre of their research methodologies. Full of insight and innovation, the book is an essential read for practitioners, student teachers, researchers and academics who want to harness the potential of Bourdieu’s core concepts in their own work, thereby helping to bridge the gap between theory and method in education research.

Integration of Geospatial and Built Environment - National Data Policy

Digital technology offers enormous benefits (economic, quality of design and efficiency in use) if adopted to implement integrated ways of representing the physical world in a digital form. When applied across the full extent of the built and natural world, it is referred to as the Digital Built Environment (DBE) and encompasses a wide range of approaches and technology initiatives, all aimed at the same end goal: the development of a virtual world that sufficiently mirrors the real world to form the basis for the smart cities of the present and future, enable efficient infrastructure design and programmed maintenance, and create a new foundation for economic growth and social well-being through evidence-based analysis. The creation of a National Data Policy for the DBE will facilitate the creation of additional high technology industries in Australia; provide Governments, industries and citizens with greater knowledge of the environments they occupy and plan; and offer citizen-driven innovations for the future. Australia has slipped behind other nations in the adoption and execution of Building Information Modelling (BIM) and the principal concern is that the gap is widening. Data driven innovation added $67 billion to the Australian economy in 20131. Strong open data policy equates to $16 billion in new value2. Australian Government initiatives such as the Digital Earth inspired “National Map” offer a platform and pathway to embrace the concept of a “BIM Globe”, while also leveraging unprecedented growth in open source / open data collaboration. Australia must address the challenges by learning from international experiences—most notably the UK and NZ—and mandate the use of BIM across Government, extending the Framework for Spatial Data Foundation to include the Built Environment as a theme and engaging collaboration through a “BIM globe” metaphor. This proposed DBE strategy will modernise the Australian urban planning and the construction industry. It will change the way we develop our cities by fundamentally altering the dynamics and behaviours of the supply chains and unlocking new and more efficient ways of collaborating at all stages of the project life-cycle. There are currently two major modelling approaches that contribute to the challenge of delivering the DBE. Though these collectively encompass many (often competing) approaches or proprietary software systems, all can be categorised as either: a spatial modelling approach, where the focus is generally on representing the elements that make up the world within their geographic context; and a construction modelling approach, where the focus is on models that support the life cycle management of the built environment. These two approaches have tended to evolve independently, addressing two broad industry sectors: the one concerned with understanding and managing global and regional aspects of the world that we inhabit, including disciplines concerned with climate, earth sciences, land ownership, urban and regional planning and infrastructure management; the other is concerned with planning, design, construction and operation of built facilities and includes architectural and engineering design, product manufacturing, construction, facility management and related disciplines (a process/technology commonly known as Building Information Modelling, BIM). The spatial industries have a strong voice in the development of public policy in Australia, while the construction sector, which in 2014 accounted for around 8.5% of Australia’s GDP3, has no single voice and because of its diversity, is struggling to adapt to and take advantage of the opportunity presented by these digital technologies. The experience in the UK over the past few years has demonstrated that government leadership is very effective in stimulating industry adoption of digital technologies by, on the one hand, mandating the use of BIM on public procurement projects while at the same time, providing comparatively modest funding to address the common issues that confront the industry in adopting that way of working across the supply chain. The reported result has been savings of £840m in construction costs in 2013/14 according to UK Cabinet Office figures4. There is worldwide recognition of the value of bringing these two modelling technologies together. Australia has the expertise to exercise leadership in this work, but it requires a commitment by government to recognise the importance of BIM as a companion methodology to the spatial technologies so that these two disciplinary domains can cooperate in the development of data policies and information exchange standards to smooth out common workflows. buildingSMART Australasia, SIBA and their academic partners have initiated this dialogue in Australia and wish to work collaboratively, with government support and leadership, to explore the opportunities open to us as we develop an Australasian Digital Built Environment. As part of that programme, we must develop and implement a strategy to accelerate the adoption of BIM processes across the Australian construction sector while at the same time, developing an integrated approach in concert with the spatial sector that will position Australia at the forefront of international best practice in this area. Australia and New Zealand cannot afford to be on the back foot as we face the challenges of rapid urbanisation and change in the global environment. Although we can identify some exemplary initiatives in this area, particularly in New Zealand in response to the need for more resilient urban development in the face of earthquake threats, there is still much that needs to be done. We are well situated in the Asian region to take a lead in this challenge, but we are at imminent risk of losing the initiative if we do not take action now. Strategic collaboration between Governments, Industry and Academia will create new jobs and wealth, with the potential, for example, to save around 20% on the delivery costs of new built assets, based on recent UK estimates.

Experimental studies on the performance of rail joints with modified wheel/railhead contact

Rail joints are provided with a gap to account for thermal movement and to maintain electrical insulation for the control of signals and/or broken rail detection circuits. The gap in the rail joint is regarded as a source of significant problems for the rail industry since it leads to a very short rail service life compared with other track components due to the various, and difficult to predict, failure modes – thus increasing the risk for train operations. Many attempts to improve the life of rail joints have led to a large number of patents around the world; notable attempts include strengthening through larger-sized joint bars, an increased number of bolts and the use of high yield materials. Unfortunately, no design to date has shown the ability to prolong the life of the rail joints to values close to those for continuously welded rail (CWR). This paper reports the results of a fundamental study that has revealed that the wheel contact at the free edge of the railhead is a major problem since it generates a singularity in the contact pressure and railhead stresses. A design was therefore developed using an optimisation framework that prevents wheel contact at the railhead edge. Finite element modelling of the design has shown that the contact pressure and railhead stress singularities are eliminated, thus increasing the potential to work as effectively as a CWR that does not have a geometric gap. An experimental validation of the finite element results is presented through an innovative non-contact measurement of strains. Some practical issues related to grinding rails to the optimal design are also discussed.