"Participation" in participatory design research

This thesis is about defining participation in the context of fostering research cohesion in the field of Participatory Design. The systematic and incremental building of new knowledge is the process by which science and research is advanced. This process requires a certain type of cohesion in the way research is undertaken for new knowledge to be built from the knowledge provided by previous projects and research. To support this process and to foster research cohesion three conditions are necessary. These conditions are: common ground between practitioners, problem-space positioning, and adherence to clear research criteria. The challenge of fostering research cohesion in Participatory Design is apparent in at least four themes raised in the literature: the role of politics within Participatory Design epistemology, the role of participation, design with users, and the ability to translate theory into practice. These four thematic challenges frame the context which the research gap is situated. These themes are also further investigated and the research gap – a general lack of research cohesion – along with one avenue for addressing this gap – a clear and operationalizable definition for participation – are identified. The intended contribution of this thesis is to develop a framework and visual tool to address this research gap. In particular, an initial approximation for a clear and operationalizable definition for participation will be proposed such that it can be used within the field of Participatory Design to run projects and foster research cohesion. In pursuit of this contribution, a critical lens is developed and used to analyse some of the principles and practices of Participatory Design that are regarded as foundational. This lens addresses how to define participation in a way that adheres to basic principles of scientific rigour – namely, ensuring that the elements of a theory are operationalizable, falsifiable, generalizable, and useful, and it also treats participation as a construct rather than treating the notion of participation as a variable. A systematic analysis is performed using this lens on the principles and practices that are considered foundational within the field. From this analysis, three components of the participation construct – impact, influence, and agency – are identified. These components are then broken down into two constituent variables each (six in all) and represented visually. Impact is described as the relationship between the quality and use of information. Influence is described as the relationship between the amount and scope of decision making. Agency is described as the relationship between the motivation of the participant and the solidarity of the group. Thus, as a construct, participation is described as the relationship between a participant’s impact, influence, and agency. In the concluding section, the value of this participation construct is explored for its utility in enhancing project work and fostering research cohesion. Three items of potential value that emerge are: the creation of a visual tool through the representation of these six constituent variables in one image; the elaboration of a common language for researchers based on the six constituent variables identified; and the ability to systematically identify and remedy participation gaps throughout the life of the project. While future research exploring the applicability of the participation construct in real world projects is necessary, it is intended that this initial approximation of a participation construct in the form of the visual tool will serve as the basis for a cohesive and rigorous discussion about participation in Participatory Design.

Perceiving and pursuing novelty : a grounded theory of adolescent creativity

Creativity plays an increasingly important role in our personal, social, educational, and community lives. For adolescents, creativity can enable self-expression, be a means of pushing boundaries, and assist learning, achievement, and completion of everyday tasks. Moreover, adolescents who demonstrate creativity can potentially enhance their capacity to face unknown future challenges, address mounting social and ecological issues in our global society, and improve their career opportunities and contribution to the economy. For these reasons, creativity is an essential capacity for young people in their present and future, and is highlighted as a priority in current educational policy nationally and internationally. Despite growing recognition of creativity’s importance and attention to creativity in research, the creative experience from the perspectives of the creators themselves and the creativity of adolescents are neglected fields of study. Hence, this research investigated adolescents’ self-reported experiences of creativity to improve understandings of their creative processes and manifestations, and how these can be supported or inhibited. Although some aspects of creativity have been extensively researched, there were no comprehensive, multidisciplinary theoretical frameworks of adolescent creativity to provide a foundation for this study. Therefore, a grounded theory methodology was adopted for the purpose of constructing a new theory to describe and explain adolescents’ creativity in a range of domains. The study’s constructivist-interpretivist perspective viewed the data and findings as interpretations of adolescents’ creative experiences, co-constructed by the participants and the researcher. The research was conducted in two academically selective high schools in Australia: one arts school, and one science, mathematics, and technology school. Twenty adolescent participants (10 from each school) were selected using theoretical sampling. Data were collected via focus groups, individual interviews, an online discussion forum, and email communications. Grounded theory methods informed a process of concurrent data collection and analysis; each iteration of analysis informed subsequent data collection. Findings portray creativity as it was perceived and experienced by participants, presented in a Grounded Theory of Adolescent Creativity. The Grounded Theory of Adolescent Creativity comprises a core category, Perceiving and Pursuing Novelty: Not the Norm, which linked all findings in the study. This core category explains how creativity involved adolescents perceiving stimuli and experiences differently, approaching tasks or life unconventionally, and pursuing novel ideas to create outcomes that are not the norm when compared with outcomes by peers. Elaboration of the core category is provided by the major categories of findings. That is, adolescent creativity entailed utilising a network of Sub-Processes of Creativity, using strategies for Managing Constraints and Challenges, and drawing on different Approaches to Creativity – adaptation, transfer, synthesis, and genesis – to apply the sub-processes and produce creative outcomes. Potentially, there were Effects of Creativity on Creators and Audiences, depending on the adolescent and the task. Three Types of Creativity were identified as the manifestations of the creative process: creative personal expression, creative boundary pushing, and creative task achievement. Interactions among adolescents’ dispositions and environments were influential in their creativity. Patterns and variations of these interactions revealed a framework of four Contexts for Creativity that offered different levels of support for creativity: high creative disposition–supportive environment; high creative disposition–inhibiting environment; low creative disposition–supportive environment; and low creative disposition–inhibiting environment. These contexts represent dimensional ranges of how dispositions and environments supported or inhibited creativity, and reveal that the optimal context for creativity differed depending on the adolescent, task, domain, and environment. This study makes four main contributions, which have methodological and theoretical implications for researchers, as well as practical implications for adolescents, parents, teachers, policy and curriculum developers, and other interested stakeholders who aim to foster the creativity of adolescents. First, this study contributes methodologically through its constructivist-interpretivist grounded theory methodology combining the grounded theory approaches of Corbin and Strauss (2008) and Charmaz (2006). Innovative data collection was also demonstrated through integration of data from online and face-to-face interactions with adolescents, within the grounded theory design. These methodological contributions have broad applicability to researchers examining complex constructs and processes, and with populations who integrate multimedia as a natural form of communication. Second, applicable to creativity in diverse domains, the Grounded Theory of Adolescent Creativity supports a hybrid view of creativity as both domain-general and domain-specific. A third major contribution was identification of a new form of creativity, educational creativity (ed-c), which categorises creativity for learning or achievement within the constraints of formal educational contexts. These theoretical contributions inform further research about creativity in different domains or multidisciplinary areas, and with populations engaged in formal education. However, the key contribution of this research is that it presents an original Theory and Model of Adolescent Creativity to explain the complex, multifaceted phenomenon of adolescents’ creative experiences.

Decision support for the safe design and operation of unmanned aircraft systems

Unmanned Aircraft Systems (UAS) describe a diverse range of aircraft that are operated without a human pilot on-board. Unmanned aircraft range from small rotorcraft, which can fit in the palm of your hand, through to fixed wing aircraft comparable in size to that of a commercial passenger jet. The absence of a pilot on-board allows these aircraft to be developed with unique performance capabilities facilitating a wide range of applications in surveillance, environmental management, agriculture, defence, and search and rescue. However, regulations relating to the safe design and operation of UAS first need to be developed before the many potential benefits from these applications can be realised. According to the International Civil Aviation Organization (ICAO), a Risk Management Process (RMP) should support all civil aviation policy and rulemaking activities (ICAO 2009). The RMP is described in International standard, ISO 31000:2009 (ISO, 2009a). This standard is intentionally generic and high-level, providing limited guidance on how it can be effectively applied to complex socio-technical decision problems such as the development of regulations for UAS. Through the application of principles and tools drawn from systems philosophy and systems engineering, this thesis explores how the RMP can be effectively applied to support the development of safety regulations for UAS. A sound systems-theoretic foundation for the RMP is presented in this thesis. Using the case-study scenario of a UAS operation over an inhabited area and through the novel application of principles drawn from general systems modelling philosophy, a consolidated framework of the definitions of the concepts of: safe, risk and hazard is made. The framework is novel in that it facilitates the representation of broader subjective factors in an assessment of the safety of a system; describes the issues associated with the specification of a system-boundary; makes explicit the hierarchical nature of the relationship between the concepts and the subsequent constraints that exist between them; and can be evaluated using a range of analytic or deliberative modelling techniques. Following the general sequence of the RMP, the thesis explores the issues associated with the quantified specification of safety criteria for UAS. A novel risk analysis tool is presented. In contrast to existing risk tools, the analysis tool presented in this thesis quantifiably characterises both the societal and individual risk of UAS operations as a function of the flight path of the aircraft. A novel structuring of the risk evaluation and risk treatment decision processes is then proposed. The structuring is achieved through the application of the Decision Support Problem Technique; a modelling approach that has been previously used to effectively model complex engineering design processes and to support decision-making in relation to airspace design. The final contribution made by this thesis is in the development of an airworthiness regulatory framework for civil UAS. A novel "airworthiness certification matrix" is proposed as a basis for the definition of UAS "Part 21" regulations. The outcome airworthiness certification matrix provides a flexible, systematic and justifiable method for promulgating airworthiness regulations for UAS. In addition, an approach for deriving "Part 1309" regulations for UAS is presented. In contrast to existing approaches, the approach presented in this thesis facilitates a traceable and objective tailoring of system-level reliability requirements across the diverse range of UAS operations. The significance of the research contained in this thesis is clearly demonstrated by its practical real world outcomes. Industry regulatory development groups and the Civil Aviation Safety Authority have endorsed the proposed airworthiness certification matrix. The risk models have also been used to support research undertaken by the Australian Department of Defence. Ultimately, it is hoped that the outcomes from this research will play a significant part in the shaping of regulations for civil UAS, here in Australia and around the world.

Design of flight avoidance manoeuvre alphabets for mixed centralised-decentralised separation management

This paper investigates a mixed centralised-decentralised air traffic separation management system, which combines the best features of the centralised and decentralised systems whilst ensuring the reliability of the air traffic management system during degraded conditions. To overcome communication band limits, we propose a mixed separation manager on the basis of a robust decision (or min-max) problem that is posed on a reduced set of admissible flight avoidance manoeuvres (or a FAM alphabet). We also present a design method for selecting an appropriate FAM alphabet for use in the mixed separation management system. Simulation studies are presented to illustrate the benefits of our proposed FAM alphabet based mixed separation manager.

Design process excludes users : the co-creation activities between user and designer

User needs are a fundamental element of design. If the design process does not properly reflect user needs, the design will be severely compromised. Therefore, it is worthwhile to investigate how the user is, and user needs are, understood in the design process. In this article, three accepted linear process models for web site and interactive media design are reviewed in terms of the designer and user participation. The article then proposes a user-evolving collaborative design process which is built on co-creation activities between designer and user. Co-creation activities across the entire design process structurally and ontologically reposition the users, and user needs, centrally, which allows the designers to holistically approach to the user needs through building a partnership with the users. Co-creation creates an equal evolving participatory process between user and designer towards sharing values and knowledge and creating new domains of collective creativity.

A randomised controlled trial of a theory-based intervention to improve sun protective behaviour in adolescents ('you can still be HOT in the shade') : study protocol

Background: Most skin cancers are preventable by encouraging consistent use of sun protective behaviour. In Australia, adolescents have high levels of knowledge and awareness of the risks of skin cancer but exhibit significantly lower sun protection behaviours than adults. There is limited research aimed at understanding why people do or do not engage in sun protective behaviour, and an associated absence of theory-based interventions to improve sun safe behaviour. This paper presents the study protocol for a school-based intervention which aims to improve the sun safe behaviour of adolescents. Methods/design: Approximately 400 adolescents (aged 12-17 years) will be recruited through Queensland, Australia public and private schools and randomized to the intervention (n = 200) or 'wait-list' control group (n = 200). The intervention focuses on encouraging supportive sun protective attitudes and beliefs, fostering perceptions of normative support for sun protection behaviour, and increasing perceptions of control/self-efficacy over using sun protection. It will be delivered during three × one hour sessions over a three week period from a trained facilitator during class time. Data will be collected one week pre-intervention (Time 1), and at one week (Time 2) and four weeks (Time 3) post-intervention. Primary outcomes are intentions to sun protect and sun protection behaviour. Secondary outcomes include attitudes toward performing sun protective behaviours (i.e., attitudes), perceptions of normative support to sun protect (i.e., subjective norms, group norms, and image norms), and perceived control over performing sun protective behaviours (i.e., perceived behavioural control). Discussion: The study will provide valuable information about the effectiveness of the intervention in improving the sun protective behaviour of adolescents.

The theory and practice on pre-qualification in bidding procedure

资格预审是招标程序中重要环节.通过对投标人的资质和业绩等审查既能保证不符合 要求的投标人尽可能早地退出无谓竞争的行列,避免了大量人力"物力的损失和浪费, 又能促进建筑市场优胜劣汰,提高企业竞争力.同时鉴于目前资格预审和建筑市场存在 的问题,笔者以为通过强化资格预审可以有效推进建筑市场信用体系建设,促进行业健康发展,并且深入探讨了资格预审体系建立的具体对策和措施.

Natures muses in Bruno Tuat’s Glashaus

Constructed for the 1914 Werkbund Exhibition in Cologne, Germany, the Glashaus was both a seminal example of early modernist architecture and Bruno Taut’s signature building. Over time, metaphors have come to be applied to the Glashaus. Within the realm of nature these metaphors include cosmic, geological, botanic and sexual. However these metaphors, like the history of the Glashaus, are not a foregone conclusion. Recently it has been argued that the majority of our current knowledge regarding the Glashaus derives not from the perspective of Bruno Taut as the architect, but rather directly from perspective of the art critic Adolf Behne. This argument goes further and proposes that Behne’s official history of Glashaus is possibly fabricated propaganda. So, if indeed the official history of the Glashaus is questionable, then too are the natural metaphors commonly applied to the building. By revisiting Bruno Taut’s pre-1915 writings, this investigation reveals that botanic metaphors appear to have been Taut’s primary source of inspiration for the design of the Glashaus. Through the exposure of this fact, this research contributes significantly to the current debates surrounding Bruno Taut, the Glashaus and the re-evaluation of the official histories of the modern movement.

Client intentions and Bruno Taut’s Glashaus

An often overlooked aspect concerning the Glashaus is the significant influence exerted by the client in the design of the building. In an intentional endeavour to create an exhibition pavilion that best showcased their glazed products and construction technologies, the German Luxfer Prism Syndicate both commissioned and majority financed the Glashaus. It would therefore seem strange that the official histories of the Glashaus would rather record the utopian, romanticised and arguably imagined intentions of Bruno Taut as the architect, as opposed to the reality of the client’s intentions. This paper offers a reinterpretation of the Glashaus from the perspective of German Luxfer Prism Syndicate. This reinterpretation is achieved through an investigation that primarily concentrates on the glazed areas of the Glashaus where the German Luxfer Prism Syndicates products were most evident. Using the arguments initially presented by Dietrich Neumann as a foundation, this research is additionally interwoven with inquiry into diverse aspects such as patents filed by the Luxfer group of companies and a close examination of the original black and white photographs of the Glashaus. A dramatically different understanding emerges when the Glashaus is argued from the perspective of the client; an understanding that is cold, hard and commercial as opposed to utopian and romanticised. As a result, this research makes a contribution to the current debate concerning the Glashaus and the re-evaluation of the histories of the modern movement.

Why the construction quality of design-build projects is not satisfactory : a Queensland study

Design-build (DB) system is well-known to be a popular and effective delivery method of construction work worldwide. It has been demonstrated as superior to the traditional delivery system in regards to time and cost performance. However, it suffers a major flaw, in that the performance of project quality cannot be guaranteed. This paper aims to investigate the underlying factors attributing to the poor quality performance of design-build projects in Queensland. Five major factors were first identified through a comprehensive literature review, which relate to (1) project briefing and scope definition, (2) client’s role and responsibility, (3) procurement selection, (4) contractor’s incentive, and (5) design document quality. A questionnaire survey with 127 DB professionals was conducted to determine how these factors affect various quality criteria, i.e. functional quality, architectural quality, technical quality, workmanship quality, client satisfaction and overall quality. With the architectural quality reduced greatly, the research findings reveal that the DB projects in Queensland have the reduced overall quality compared with traditional projects. The impacts of different factors on the quality performance of DB projects have been closely examined and summarized. The research findings will facilitate project stakeholder’s better understanding of the delivery process of the DB system and provide guidelines to improve the quality performance.

Using process models to support design of airport terminals

The complex design process of airport terminal needs to support a wide range of changes in operational facilities for both usual and unusual/emergency events. Process model describes how activities within a process are connected and also states logical information flow of the various activities. The traditional design process overlooks the necessity of information flow from the process model to the actual building design, which needs to be considered as a integral part of building design. The current research introduced a generic method to obtain design related information from process model to incorporate with the design process. Appropriate integration of the process model prior to the design process uncovers the relationship exist between spaces and their relevant functions, which could be missed in the traditional design approach. The current paper examines the available Business Process Model (BPM) and generates modified Business Process Model(mBPM) of check-in facilities of Brisbane International airport. The information adopted from mBPM then transform into possible physical layout utilizing graph theory.

The future of design

When asked about the future of design, I immediately think of two things. Firstly, I am drawn to the concept of design thinking - the process individuals go through when critically evaluating a situation, place, space or circumstance and reframing it. Design thinking is the critical reframing process. Secondly, my thoughts turn to education and the teaching of design thinking and the late philosopher John Dewey (1910:139), who states...

Teaching design and emotion in the foundation year : an industrial design approach

This paper showcases two design tools; the ‘storyboard’ and ‘a day in the life’ demonstrated to design students in their foundational year (first year) of study. By employing these tools during the design process the aim was to provoke students to consider and design for emotional experiences for potential users. The assessment asked students to design an MP3 player using these tools. This is demonstrated through a student project that successfully used the tools and method introduced. The teaching theory, project context, student outcome as well as challenges faced by students using this approach are discussed. The paper concludes with implications for teaching emotion theory at an undergraduate level and potential future directions.

Broadening horizons : an emerging research agenda modelling design led innovation across secondary education

A re-examination of design education at all levels is needed to ensure global economic competitiveness and social and environmental sustainment. This paper presents an emerging research agenda modelling design led innovation approaches from the business sector to secondary education curriculum. To do this, a review of literature is provided and current knowledge gaps surrounding design education are detailed. A regional secondary school design immersion program is outlined as a future research case study using action research. A framework and recommendations for developing and delivering pedagogical approaches for 21st century skill outcomes in secondary education are briefly introduced and future research objectives are overviewed and discussed.

Gaps in organizational leadership : linking strategic and operational activities through design-led propositions

The relationship between design process and business systems has been of interest to both practitioners and researchers exploring the numerous opportunities and challenges of this unlikely relationship. Often the relationship is presented as building design thinking capability within an organization, which can be broadly described as the union of design and strategy. Brown (2008) notes that design thinking is ‘‘a discipline that uses the designer’s sensibility and methods to match people’s needs with what is technically feasible and what business strategy can convert into customer value and market opportunities’’ (p. 1). The value that design thinking brings to an organization is a different way of framing situations and possibilities, doing things, and tackling problems: essentially a cultural transformation of the way it undertakes its business. The work of Martin (2009) has clearly shown the generalized differences between design thinking and business thinking, highlighting many instances in which these differences have been overcome, but also noting the many obstacles of trying to unify both approaches within an organization. Liedtka (2010) encourages firms to try and persist in overcoming these barriers, as she has noted that ‘‘business strategy desperately needs design ... because design is all about action and business strategy too often turns out to be only about talk ... fewer than 10 percent of new strategies are ever fully executed’’ (p. 9).