Perubahan bahasa dalam perspektif Pre neogrammarian dan Neogrammarian dan Pengajaran bahasa dalam konteks EFL (Pre-Neogrammarian and Neogrammarians’ language change and English language pedagogy in EFL contexts)

This article describes different perspectives in response to language change, and aligns the perspectives of language change to English language pedagogy in non-English speaking contexts. The Pre-Neogrammarian and Neo-grammarian linguists that believe the change leads to respectively language decay or language existence will be outlined. This article suggests that the theories derived from both perspectives can be applied to any language. Once there is cultural contact between languages, the dominant language tends to suppress the non-dominant language. Hence, besides focusing on changes that happen in English and the effects of the changes into this language, this article also considers that other language—in this case EFL teachers’ “local language”—experiences an adverse change as the result of the speakers’ interaction with English. Then, this article also describes how the changes might lead to EFL teachers’ adaptation in their practice and cause teachers’ dilemmas.

Modelling intermittent microwave convective drying (IMCD) of food materials

This thesis develops comprehensive mathematical models for an advanced drying technology Intermittent Microwave Convective Drying (IMCD). The models provide an improved physical understanding of the heat and mass transport during the drying process, which will help to improve the quality of dried food and energy efficiency of the process, as well as will increase the ability of automation and optimization. The final model in this thesis represents the most comprehensive fundamental multiphase model for IMCD that considers 3D electromagnetics coupled with multiphase porous media transport processes. The 3D electromagnetics considers Maxwell's equation and multiphase transport model considers three different phases: solid matrix, liquid water and gas consisting water vapour and air. The multiphase transport includes pressure-driven flow, capillary diffusion, binary diffusion, and evaporation. The models developed in this thesis were validated with extensive experimental investigations.

Language Literacy and Numeracy in TAFE Diploma of Nursing (Enrolled/Division 2 Nursing)

This project aimed to identify current Language Literacy and Numeracy (LLN) and Inclusive Teaching and Learning Practices in a TAFE Diploma of Nursing (Enrolled/Division 2 Nursing). The key purpose of the study was to make recommendations for improving inclusive teaching practice and learning outcomes of students and for reducing student attrition, thereby increasing the employability of graduates in the health industry subsequent to course completion.

Generation of catalytically active materials from a liquid metal precursor

A facile route to prepare catalystically active materials from a galinstan liquid metal alloy is introduced. Sonicating liquid galinstan in alkaline solution or treating it in reducing media results in the creation of solid In/Sn rich microspheres that show catalytic activity toward both potassium ferricyanide and 4-nitrophenol reduction.

Second language social networks and communication-related acculturative stress: The role of interconnectedness

Although a substantial amount of cross-cultural psychology research has investigated acculturative stress in general, little attention has been devoted specifically to communication-related acculturative stress (CRAS). In line with the view that cross-cultural adaptation and second language (L2) learning are social and interpersonal phenomena, the present study examines the hypothesis that migrants’ L2 social network size and interconnectedness predict CRAS. The main idea underlying this hypothesis is that L2 social networks play an important role in fostering social and cultural aspects of communicative competence. Specifically, higher interconnectedness may reflect greater access to unmodified natural cultural representations and L2 communication practices, thus fostering communicative competence through observational learning. As such, structural aspects of migrants’ L2 social networks may be protective against acculturative stress arising from chronic communication difficulties. Results from a study of first generation migrant students (N = 100) support this idea by showing that both inclusiveness and density of the participants’ L2 network account for unique variance in CRAS but not in general acculturative stress. These results support the idea that research on cross-cultural adaptation would benefit from disentangling the various facets of acculturative stress and that the structure of migrants’ L2 network matters for language related outcomes. Finally, this study contributes to an emerging body of work that attempts to integrate cultural/cross-cultural research on acculturation and research on intercultural communication and second language learning.

Race, the senses, and the materials of writing practices

The paper is a critical argument foregrounding race, the senses, and the materials of literacy practices. The author argues that counter-colonial literacies in the contemporary times require openly acknowledgement of the influences of white imperialism and racism in dominant schooling practices. The first concern is narrow conceptions of literacy and schooling that follow a white racial script, and which function as a form of historical reproduction, control, and privilege. The second is the need to acknowledge the need to rediscover the sensory nature of literacy practices that is intrinsic to many cultures, and which is transformed in human interactions with new digital forms of textual production. The final argument is the need to attend to the materiality of literacy practices, including the meanings connected to the material ecology. This principle is particularly relevant to Indigenous culture and experience, but likewise, to all digital environments where the materials of literacy practices are continually shifting.

Verification and Operation of Adaptive Materials in Space

Piezoelectric polymers based on polyvinylidene fluoride (PVDF) are of interest as smart materials for novel space-based telescope applications. Dimensional adjustments of adaptive thin polymer films are achieved via controlled charge deposition. Predicting their long-term performance requires a detailed understanding of the piezoelectric property changes that develop during space environmental exposure. The overall materials performance is governed by a combination of chemical and physical degradation processes occurring in low Earth orbit as established by our past laboratory-based materials performance experiments (see report SAND 2005-6846). Molecular changes are primarily induced via radiative damage, and physical damage from temperature and atomic oxygen exposure is evident as depoling, loss of orientation and surface erosion. The current project extension has allowed us to design and fabricate small experimental units to be exposed to low Earth orbit environments as part of the Materials International Space Station Experiments program. The space exposure of these piezoelectric polymers will verify the observed trends and their degradation pathways, and provide feedback on using piezoelectric polymer films in space. This will be the first time that PVDF-based adaptive polymer films will be operated and exposed to combined atomic oxygen, solar UV and temperature variations in an actual space environment. The experiments are designed to be fully autonomous, involving cyclic application of excitation voltages, sensitive film position sensors and remote data logging. This mission will provide critically needed feedback on the long-term performance and degradation of such materials, and ultimately the feasibility of large adaptive and low weight optical systems utilizing these polymers in space.

Multilingualism and speech-language competence in early childhood: Impact on academic and social-emotional outcomes at school

This large-scale longitudinal population study provided a rare opportunity to consider the interface between multilingualism and speech-language competence on children’s academic and social-emotional outcomes and to determine whether differences between groups at 4 to 5 years persist, deepen, or disappear with time and schooling. Four distinct groups were identified from the Kindergarten cohort of the Longitudinal Study of Australian Children (LSAC) (1) English-only + typical speech and language (n = 2,012); (2) multilingual + typical speech and language (n = 476); (3) English-only + speech and language concern (n = 643); and (4) multilingual + speech and language concern (n = 109). Two analytic approaches were used to compare these groups. First, a matched case-control design was used to randomly match multilingual children with speech and language concern (group 4, n = 109) to children in groups 1, 2, and 3 on gender, age, and family socio-economic position in a cross-sectional comparison of vocabulary, school readiness, and behavioral adjustment. Next, analyses were applied to the whole sample to determine longitudinal effects of group membership on teachers’ ratings of literacy, numeracy, and behavioral adjustment at ages 6 to 7 and 8 to 9 years. At 4 to 5 years, multilingual children with speech and language concern did equally well or better than English-only children (with or without speech and language concern) on school readiness tests but performed more poorly on measures of English vocabulary and behavior. At ages 6 to 7 and 8 to 9, the early gap between English-only and multilingual children had closed. Multilingualism was not found to contribute to differences in literacy and numeracy outcomes at school; instead, outcomes were more related to concerns about children’s speech and language in early childhood. There were no group differences for socio-emotional outcomes. Early evidence for the combined risks of multilingualism plus speech and language concern was not upheld into the school years.

Use of 3D printed materials as tissue-equivalent phantoms

This study used the specific example of 3D printing with acrylonitrile butadiene styrene (ABS) as a means to investigate the potential usefulness of benchtop rapid prototyping as a technique for producing patient specific phantoms for radiotherapy dosimetry. Three small cylinders and one model of a human lung were produced via in-house 3D printing with ABS, using 90%, 50%, 30% and 10% ABS infill densities. These phantom samples were evaluated in terms of their geometric accuracy, tissue equivalence and radiation hardness, when irradiated using a range of clinical radiotherapy beams. The measured dimensions of the small cylindrical phantoms all matched their planned dimensions, within 1mm. The lung phantom was less accurately matched to the lung geometry on which it was based, due to simplifications introduced during the phantom design process. The mass densities, electron densities and linear attenuation coefficients identified using CT data, as well as the results of film measurements made using megavoltage photon and electron beams, indicated that phantoms printed with ABS, using infill densities of 30% or more, are potentially useful as lung- and tissue-equivalent phantoms for patient-specific radiotherapy dosimetry. All cylindrical 3D printed phantom samples were found to be unaffected by prolonged radiation and to accurately match their design specifications. However, care should be taken to avoid oversimplifying anatomical structures when printing more complex phantoms.

Environmental efficiency of energy, materials, and emissions

This study estimates the environmental efficiency of international listed firms in 10 worldwide sectors from 2007 to 2013 by applying an order-m method, a non-parametric approach based on free disposal hull with subsampling bootstrapping. Using a conventional output of gross profit and two conventional inputs of labor and capital, this study examines the order-m environmental efficiency accounting for the presence of each of 10 undesirable inputs/outputs and measures the shadow prices of each undesirable input and output. The results show that there is greater potential for the reduction of undesirable inputs rather than bad outputs. On average, total energy, electricity, or water usage has the potential to be reduced by 50%. The median shadow prices of undesirable inputs, however, are much higher than the surveyed representative market prices. Approximately 10% of the firms in the sample appear to be potential sellers or production reducers in terms of undesirable inputs/outputs, which implies that the price of each item at the current level has little impact on most of the firms. Moreover, this study shows that the environmental, social, and governance activities of a firm do not considerably affect environmental efficiency.

A review of benchmarking in carbon labelling schemes for building materials

As one of the largest sources of greenhouse gas (GHG) emissions, the building and construction sector is facing increasing pressure to reduce its life cycle GHG emissions. One central issue in striving towards reduced carbon emissions in the building and construction sector is to develop a practical and meaningful yardstick to assess and communicate GHG results through carbon labelling. The idea of carbon labelling schemes for building materials is to trigger a transition to a low carbon future by switching consumer-purchasing habits to low-carbon alternatives. As such, failing to change purchasing pattern and behaviour can be disastrous to carbon labelling schemes. One useful tool to assist customers to change their purchasing behaviour is benchmarking, which has been very commonly used in ecolabelling schemes. This paper analyses the definition and scope of benchmarking in the carbon labelling schemes for building materials. The benchmarking process has been examined within the context of carbon labelling. Four practical issues for the successful implementation of benchmarking, including the availability of benchmarks and databases, the usefulness of different types of benchmarks and the selection of labelling practices have also been clarified.

Overcoming language barriers in healthcare: A protocol for investigating safe and effective communication when patients or clinicians use a second language

Background Miscommunication in the healthcare sector can be life-threatening. The rising number of migrant patients and foreign-trained staff means that communication errors between a healthcare practitioner and patient when one or both are speaking a second language are increasingly likely. However, there is limited research that addresses this issue systematically. This protocol outlines a hospital-based study examining interactions between healthcare practitioners and their patients who either share or do not share a first language. Of particular interest are the nature and efficacy of communication in language-discordant conversations, and the degree to which risk is communicated. Our aim is to understand language barriers and miscommunication that may occur in healthcare settings between patients and healthcare practitioners, especially where at least one of the speakers is using a second (weaker) language. Methods/Design Eighty individual interactions between patients and practitioners who speak either English or Chinese (Mandarin or Cantonese) as their first language will be video recorded in a range of in- and out-patient departments at three hospitals in the Metro South area of Brisbane, Australia. All participants will complete a language background questionnaire. Patients will also complete a short survey rating the effectiveness of the interaction. Recordings will be transcribed and submitted to both quantitative and qualitative analyses to determine elements of the language used that might be particularly problematic and the extent to which language concordance and discordance impacts on the quality of the patient-practitioner consultation. Discussion Understanding the role that language plays in creating barriers to healthcare is critical for healthcare systems that are experiencing an increasing range of culturally and linguistically diverse populations both amongst patients and practitioners. The data resulting from this study will inform policy and practical solutions for communication training, provide an agenda for future research, and extend theory in health communication.

Orientations to Critical Literacy for English as an Additional Language or Dialect (EAL/D) learners: A case study of four teachers of senior English

Recently, the debate around critical literacy has dissipated as literacy education agendas and attendant policies shift to embrace more hybrid approaches to the teaching of senior English. This paper reports on orientations towards critical literacy as expressed by four teachers of senior English who teach culturally and linguistically diverse learners. Teachers’ understandings of critical literacy are important given the emphasis on Critical and Creative Thinking as well as Literacy as General Capabilities underpinning the Australian Curriculum. Using critical discourse analysis and Janks' (2010) Synthesis Model of Critical Literacy, interview and classroom data from four teachers of English as an Additional Language or Dialect (EAL/D) learners in two high schools were analysed for the ways these teachers constructed critical literacy in their talk and practice. While all four teachers indicated significant commitment to critical literacy as an approach to English language teaching, their understandings varied. These ranged from providing access to powerful genres, to rationalist approaches to interrogating text, with less emphasis on multimodal design and drawing on learner diversity. This has significant implications for what kind of learning is being offered to EAL/D learners in the name of English teaching, for syllabus design, and for teacher professional development.

A mathematical model for intermittent microwave convective (IMCD) drying of food materials

Intermittent microwave convective drying (IMCD) is an advanced technology that improves both energy efficiency and food quality in drying. Modelling of IMCD is essential to understand the physics of this advanced drying process and to optimize the microwave power level and intermittency during drying. However, there is still a lack of modelling studies dedicated to IMCD. In this study, a mathematical model for IMCD was developed and validated with experimental data. The model showed that the interior temperature of the material was higher than the surface in IMCD, and that the temperatures fluctuated and redistributed due to the intermittency of the microwave power. This redistribution of temperature could significantly contribute to the improvement of product quality during IMCD. Limitations when using Lambert's Law for microwave heat generation were identified and discussed.