Prostate cancer biomarkers and the emerging proteomic techniques used in biomarker research

Prostate cancer (CaP) is the second leading cause of cancer-related deaths in North American males and the most common newly diagnosed cancer in men world wide. Biomarkers are widely used for both early detection and prognostic tests for cancer. The current, commonly used biomarker for CaP is serum prostate specific antigen (PSA). However, the specificity of this biomarker is low as its serum level is not only increased in CaP but also in various other diseases, with age and even body mass index. Human body fluids provide an excellent resource for the discovery of biomarkers, with the advantage over tissue/biopsy samples of their ease of access, due to the less invasive nature of collection. However, their analysis presents challenges in terms of variability and validation. Blood and urine are two human body fluids commonly used for CaP research, but their proteomic analyses are limited both by the large dynamic range of protein abundance making detection of low abundance proteins difficult and in the case of urine, by the high salt concentration. To overcome these challenges, different techniques for removal of high abundance proteins and enrichment of low abundance proteins are used. Their applications and limitations are discussed in this review. A number of innovative proteomic techniques have improved detection of biomarkers. They include two dimensional differential gel electrophoresis (2D-DIGE), quantitative mass spectrometry (MS) and functional proteomic studies, i.e., investigating the association of post translational modifications (PTMs) such as phosphorylation, glycosylation and protein degradation. The recent development of quantitative MS techniques such as stable isotope labeling with amino acids in cell culture (SILAC), isobaric tags for relative and absolute quantitation (iTRAQ) and multiple reaction monitoring (MRM) have allowed proteomic researchers to quantitatively compare data from different samples. 2D-DIGE has greatly improved the statistical power of classical 2D gel analysis by introducing an internal control. This chapter aims to review novel CaP biomarkers as well as to discuss current trends in biomarker research from two angles: the source of biomarkers (particularly human body fluids such as blood and urine), and emerging proteomic approaches for biomarker research.

Using information communication technologies to develop dynamic curriculum frameworks for diverse cohorts: a case study from event management

This article investigates the role of information communication technologies (ICTs) in establishing a well-aligned, authentic learning environment for a diverse cohort of non-cognate and cognate students studying event management in a higher education context. Based on a case study which examined the way ICTs assisted in accommodating diverse learning needs, styles and stages in an event management subject offered in the Creative Industries Faculty at Queensland University of Technology in Brisbane, Australia, the article uses an action research approach to generate grounded, empirical data on the effectiveness of the dynamic, individualised curriculum frameworks that the use of ICTs makes possible. The study provides insights into the way non-cognate and cognate students respond to different learning tools. It finds that whilst non-cognate and cognate students do respond to learning tools differently, due to a differing degree of emphasis on technical, task or theoretical competencies, the use of ICTs allows all students to improve their performance by providing multiple points of entry into the content. In this respect, whilst the article focuses on the way ICTs can be used to develop an authentic, well-aligned curriculum model that meets the needs of event management students in a higher education context, with findings relevant for event educators in Business, Hospitality, Tourism and Creative Industries, the strategies outlined may also be useful for educators in other fields who are faced with similar challenges when designing and developing curriculum for diverse cohorts.

Universal access to ambulance does not increase overall demand for ambulance services in Queensland, Australia

Objective. To determine the impact of the introduction of universal access to ambulance services via the implementation of the Community Ambulance Cover (CAC) program in Queensland in 2003–04. Method. The study involved a 10-year (2000–01 to 2009–10) retrospective analysis of routinely collected data reported by the Queensland Ambulance Service (QAS) and by the Council of Ambulance Authorities. The data were analysed for the impact of policy changes that resulted in universal access to ambulance services in Queensland. Results. QASis a statewide, publically funded ambulance service. In Queensland, ambulance utilisation rate (AUR)per 1000 persons grew by 41% over the decade or 3.9% per annum (10-year mean = 149.8, 95% CI: 137.3–162.3). The AUR mean after CAC was significantly higher for urgent incidents than for non-urgent ones. However projection modelling demonstrates that URs after the introduction of CAC were significantly lower than the projected utilisation for the same period. Conclusions. The introduction of universal access under the Community Ambulance Cover program in Queensland has not had any significant independent long-term impact on demand overall. There has been a reduction in the long-term growth rate, which may have been contributed to by an ‘appropriate use’ public awareness program.

A simulation-based training system for surgical wound debridement

A simulation-based training system for surgical wound debridement was developed and comprises a multimedia introduction, a surgical simulator (tutorial component), and an assessment component. The simulator includes two PCs, a haptic device, and mirrored display. Debridement is performed on a virtual leg model with a shallow laceration wound superimposed. Trainees are instructed to remove debris with forceps, scrub with a brush, and rinse with saline solution to maintain sterility. Research and development issues currently under investigation include tissue deformation models using mass-spring system and finite element methods; tissue cutting using a high-resolution volumetric mesh and dynamic topology; and accurate collision detection, cutting, and soft-body haptic rendering for two devices within the same haptic space.

Effects of various power system stabilizers on improving power system dynamic performance

To ensure the small-signal stability of a power system, power system stabilizers (PSSs) are extensively applied for damping low frequency power oscillations through modulating the excitation supplied to synchronous machines, and increasing interest has been focused on developing different PSS schemes to tackle the threat of damping oscillations to power system stability. This paper examines four different PSS models and investigates their performances on damping power system dynamics using both small-signal eigenvalue analysis and large-signal dynamic simulations. The four kinds of PSSs examined include the Conventional PSS (CPSS), Single Neuron based PSS (SNPSS), Adaptive PSS (APSS) and Multi-band PSS (MBPSS). A steep descent parameter optimization algorithm is employed to seek the optimal PSS design parameters. To evaluate the effects of these PSSs on improving power system dynamic behaviors, case studies are carried out on an 8-unit 24-bus power system through both small-signal eigenvalue analysis and large-signal time-domain simulations.

Dynamic equivalent state estimation for multi-area power systems with synchronized phasor measurement units

This paper proposes a new approach for state estimation of angles and frequencies of equivalent areas in large power systems with synchronized phasor measurement units. Defining coherent generators and their correspondent areas, generators are aggregated and system reduction is performed in each area of inter-connected power systems. The structure of the reduced system is obtained based on the characteristics of the reduced linear model and measurement data to form the non-linear model of the reduced system. Then a Kalman estimator is designed for the reduced system to provide an equivalent dynamic system state estimation using the synchronized phasor measurement data. The method is simulated on two test systems to evaluate the feasibility of the proposed method.

A chance for diversity? Australian online journalism

Australia’s mainstream media landscape has long been recognised as highly limited – media ownership in the country has traditionally been concentrated in the hands of a very few, and (except for Sydney and Melbourne) it is common for major Australian cities to be served by only one local newspaper, usually produced by Rupert Murdoch’s News Ltd. This can be seen also to affect the quality and diversity of Australian journalism; additionally, the global decline of newspaper publishers’ revenues and overall adverse economic conditions exert further pressure on journalistic operations in the country. At the same time, and possibly in response to the increasing stresses on industrial journalism in the country and the implications they have for the quality of journalistic products, a vibrant and dynamic ecosystem of Australian industrial and citizen journalism publications has emerged online. Existing media organisations have built strong news brands online, while citizen journalists and political bloggers have given voice to issues, concerns, and opinions hitherto underrepresented in Australian mainstream journalism; of particular interest, however, is the increasing level of engagement and interaction between the two. While such interaction has been characterised by deep animosity at times (especially also in the context of the Australian federal election in November 2007), Australia has also seen the emergence and establishment of a number of new, intermediary online publications which act as spaces for public debate and analysis – from the public intellectualism of Online Opinion through the muckraking of Crikey to the progressive politics of New Matilda. The rise of social media as spaces for the discussion of news and politics further changes the media environment, potentially leading both to renewed conflict between professional and citizen journalists and to a greater level of engagement between journalists and audiences. Overall, then, such online developments offer a chance for a greater diversity of opinion and representation in Australian journalism, but also remain under a cloud from uncertain long-term business models and funding arrangements. This chapter outlines current trends in Australian online journalism, and speculates about their effect on the Australian news media landscape.

Dynamic optimization of migration topology in internet-based distributed genetic algorithms

Distributed Genetic Algorithms (DGAs) designed for the Internet have to take its high communication cost into consideration. For island model GAs, the migration topology has a major impact on DGA performance. This paper describes and evaluates an adaptive migration topology optimizer that keeps the communication load low while maintaining high solution quality. Experiments on benchmark problems show that the optimized topology outperforms static or random topologies of the same degree of connectivity. The applicability of the method on real-world problems is demonstrated on a hard optimization problem in VLSI design.

Psychosocial experience of cancer : surpassing mere survival and recognising the potential for posttraumatic growth as well as distress.

The publication of the fourth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV; American Psychiatric Association, 1994) introduced the notion that a life-threatening illness can be a stressor and catalyst for Posttraumatic Stress Disorder (PTSD). Since then a solid body of research has been established investigating the post-diagnosis experience of cancer. These studies have identified a number of short and long-term life changes resulting from a diagnosis of cancer and associated treatments. In this chapter, we discuss the psychosocial response to the cancer experience and the potential for cancer-related distress. Cancer can represent a life-threatening diagnosis that may be associated with aggressive treatments and result in physical and psychological changes. The potential for future trauma through the lasting effects of the disease and treatment, and the possibility of recurrence, can be a source of continued psychological distress. In addition to the documented adverse repercussions of cancer, we also outline the recent shift that has occurred in the psycho-oncology literature regarding positive life change or posttraumatic growth that is commonly reported after a diagnosis of cancer. Adopting a salutogenic framework acknowledges that the cancer experience is a dynamic psychosocial process with both negative and positive repercussions. Next, we describe the situational and individual factors that are associated with posttraumatic growth and the types of positive life change that are prevalent in this context. Finally, we discuss the implications of this research in a therapeutic context and the directions of future posttraumatic growth research with cancer survivors. This chapter will present both quantitative and qualitative research that indicates the potential for personal growth from adversity rather than just mere survival and return to pre-diagnosis functioning. It is important to emphasise however, that the presence of growth and prevalence of resilience does not negate the extremely distressing nature of a cancer diagnosis for the patient and their families and the suffering that can accompany treatment regimes. Indeed, it will be explained that for growth to occur, the experience must be one that quite literally shatters previously held schemas in order to act as a catalyst for change.

Model development and dynamic load-sharing analysis of longitudinal-connected air suspensions

The objective of this research was to investigate the effect of suspension parameters on dynamic load-sharing of longitudinal-connected air suspensions of a tri-axle semi-trailer. A novel nonlinear model of a multi-axle semi-trailer with longitudinal-connected air suspension was formulated based on fluid mechanics and thermodynamics and was validated through test results. The effects of suspension parameters on dynamic load-sharing and road-friendliness of the semi-trailer were analyzed. Simulation results indicate that the road-friendliness metric DLC (Dynamic Load Coefficient), is generally in accordance with the load-sharing metric - DLSC (Dynamic Load Sharing Coefficient). When the static height or static pressure increases, the DLSC optimization ratio declines monotonically. The effect of employing larger air lines and connectors on the DLSC optimization ratio gives varying results as road roughness increases and as driving speed increases. The results also indicate that if the air line diameter is always assumed to be larger than the connector diameter, the influence of air line diameter on load-sharing is more significant than that of the connector.

Weight stigma in maternity care : women's experiences and care providers' attitudes

Background: Weight stigma is pervasive in Western society and in healthcare settings, and has a negative impact on victims’ psychological and physical health. In the context of an increasing focus on the management of overweight and obese women during and after pregnancy in research and clinical practice, the current studies aimed to examine the presence of weight stigma in maternity care. Addressing previous limitations in the weight stigma literature, this paper quantitatively explores the presence of weight stigma from both patient and care provider perspectives. Methods: Study One investigated associations between pre-pregnancy body mass index (BMI) and experiences of maternity care from a state-wide, self-reported survey of 627 Australian women who gave birth in 2009. Study Two involved administration of an online survey to 248 Australian pre-service medical and maternity care providers, to investigate their perceptions of, and attitudes towards, providing care for pregnant patients of differing body sizes. Both studies used linear regression analyses. Results: Women with a higher BMI were more likely to report negative experiences of care during pregnancy and after birth, compared to lower weight women. Pre-service maternity care providers perceived overweight and obese women as having poorer self-management behaviours, and reported less positive attitudes towards caring for overweight or obese pregnant women, than normal weight pregnant women. Even care providers who reported few weight-stigmatising attitudes responded less positively to overweight and obese pregnant women. Conclusions: Overall, these results provide preliminary evidence that weight stigma is present in maternity care settings in Australia. They suggest a need for further research into the nature and consequences of weight stigma in maternity care, and for the inclusion of strategies to recognise and combat weight stigma in maternity care professionals’ training.

A non-linear dynamic analysis of heavy haul track line sleepers under wheel flat

Significant wheel-rail dynamic forces occur because of imperfections in the wheels and/or rail. One of the key responses to the transmission of these forces down through the track is impact force on the sleepers. Dynamic analysis of nonlinear systems is very complicated and does not lend itself easily to a classical solution of multiple equations. Trying to deduce the behaviour of track components from experimental data is very difficult because such data is hard to obtain and applies to only the particular conditions of the track being tested. The finite element method can be the best solution to this dilemma. This paper describes a finite element model using the software package ANSYS for various sized flat defects in the tread of a wheel rolling at a typical speed on heavy haul track. The paper explores the dynamic response of a prestressed concrete sleeper to these defects.

A dynamic wheel-rail impact analysis of railway track under wheel flat by Finite Element Analysis

Wheel–rail interaction is one of the most important research topics in railway engineering. It involves track impact response, track vibration and track safety. Track structure failures caused by wheel–rail impact forces can lead to significant economic loss for track owners through damage to rails and to the sleepers beneath. Wheel–rail impact forces occur because of imperfections in the wheels or rails such as wheel flats, irregular wheel profiles, rail corrugations and differences in the heights of rails connected at a welded joint. A wheel flat can cause a large dynamic impact force as well as a forced vibration with a high frequency, which can cause damage to the track structure. In the present work, a three-dimensional (3-D) finite element (FE) model for the impact analysis induced by the wheel flat is developed by use of the finite element analysis (FEA) software package ANSYS and validated by another validated simulation. The effect of wheel flats on impact forces is thoroughly investigated. It is found that the presence of a wheel flat will significantly increase the dynamic impact force on both rail and sleeper. The impact force will monotonically increase with the size of wheel flats. The relationships between the impact force and the wheel flat size are explored from this finite element analysis and they are important for track engineers to improve their understanding of the design and maintenance of the track system.

International entrepreneurship for SME business growth : a resource and dynamic capability view of the firm : an internet context

This research explores the relationship between international business Internet capabilities and international entrepreneurial characteristics. It has been suggested, that the accumulation of a firms Internet capability can assist international operations, especially when operating in fast changing dynamic environments. However, the international entrepreneurial characteristics which are seen as a precursor to leveraging such capabilities are still vague. Given this finding a conceptual framework is constructed and research issues are then developed in order to focus attention on the relationship between the Internet and a firm’s resource base, dynamic capabilities and international market performance.

Uptake of skin self-examination and clinical examination behavior by outdoor workers

This study investigated the association between outdoor work and response to a behavioural skin cancer early detection intervention among men 50 years or older. Overall, 495 men currently working in outdoor, mixed or indoor occupations were randomised to a video-based intervention or control group. At 7 months post intervention, indoor workers reported the lowest proportion of whole-body skin self-examination (wbSSE; 20%). However, at 13 months mixed workers engaged more commonly in wbSSE (36%) compared to indoor (31%) and outdoor (32%) workers. In adjusted analysis, the uptake of early detection behaviours during the trial did not differ between men working in different settings. Outdoor workers compared to men in indoor or mixed work settings were similar in their response to an intervention encouraging uptake of secondary skin cancer prevention behaviours during this intervention trial.