Design, manufacturing and maintenance of sugar milling equipment : observations from the 2008 ISSCT Engineering Workshop

An International Society of Sugar Cane Technologists (ISSCT) Engineering Workshop was held in Piracicaba, Brazil from 30 June to 4 July 2008. The theme of the workshop was Design, manufacturing and maintenance of sugar mill equipment. The workshop consisted of a series of technical sessions and site visits. The Brazilian sugar industry is growing rapidly. The growth has occurred as the result of the sugar industry’s position as a key provider of renewable energy in the form of ethanol and, more recently, electricity. The increased focus on electricity is seeing investment in high pressure (100 bar) boilers, cane cleaning plants that allow an increased biomass supply from trash and digesters that produce biogas from dunder. It is clear that the Brazilian sugar industry has a well defined place in the country’s future. The ISSCT workshop provided a good opportunity to gain information from equipment suppliers and discuss new technology that may have application in Australia. The new technologies of interest included IMCO sintered carbide shredder hammer tips, Fives Cail MillMax mills, planetary mill gearboxes, Bosch Projects chainless diffusers, Fives Cail Zuka centrifugals and Vaperma Siftek membrane systems.

Design, manufacturing and maintenance of sugar mill equipment

The ISSCT Engineering Workshop 2008 in Brazil was well attended with 62 participants including 39 overseas visitors from 15 countries. The workshop addressed the theme Design, manufacturing and maintenance of sugar mill equipment. From the technical sessions, the following conclusions were drawn: • Several speakers articulated a shared vision of the future of the Brazilian sugar industry. This shared vision gives considerable confidence that the vision can become a reality. • There is an increased focus on energy products. As a result, the reduction of factory energy consumption in order to maximise the energy available for products is also a focus. • New equipment and products are being developed with reduced power consumption, lower capital and maintenance costs, and better performance. • Methods presented for reducing maintenance costs included the use of a maintenance management system, condition monitoring and material selection. The workshop was held in conjunction with Piracicaba’s annual SIMTEC exhibition for the sugar and alcohol industries that provides a forum for technical presentations and discussion, and showcases products and services from manufacturers and service providers. In return for holding the workshop in conjunction with SIMTEC, SIMTEC provided sponsorship for the workshop, including paying travel and accommodation costs for two invited speakers, and organisation for the workshop. The ISSCT and SIMTEC technical programs were arranged so that their technical sessions did not clash, and the ISSCT program was extended a day to provide an opportunity for ISSCT participants to attend the SIMTEC exhibition. Informal feedback from workshop participants suggested that the arrangement between ISSCT and SIMTEC worked well. Site visits to two manufacturing facilities and two sugar mills were arranged as part of the workshop.

From styling to strategy : transforming an Australian manufacturing SME's perception of design

This thesis explores the shift in perception of design from a styling and product-focused tool, towards a holistic strategic approach within a small to medium sized manufacturing company. This research is significant because it demonstrates how design tools and approaches can be used within business to translate theory into operational, strategic and cultural outcomes. The outcomes of this research will encourage other businesses to take on similar design-led projects with the ultimate goal of employing design as a means to create a sustainable competitive advantage.

Processes of transformation : art into pop and back again

This research project was a case study for managing and innovating an interdisciplinary practice: specifically across music, performance and contemporary art. Key works included painting/sound/video installation, experimental performance, electronic pop music, music video and electronic pop music performance. An idiosyncratic and transformative use of colour emerged as an underlying theme and strategy for cohesion. The project offers strategies for the challenges of interdisciplinary practice specifically addressing the limitations related to institutionalised value systems, aesthetic traditions and disciplinary languages.

Pathways to peace : a phenomenological exploration of the processes of healing and posttraumatic growth following childhood sexual assault

This thesis explored pathways to healing in men and women who experienced traumatic sexual abuse in childhood and considered themselves to be in a place of wellness. The thesis synthesises current knowledge in this area and has produced a number of models with direct implications for clinical practice. This unique work has also contributed to advancing theoretical understanding of healing following sexual assault.

The Cressbrook Creek alluvial aquifer system, Southeast Queensland : hydrochemistry and isotopes to determine hydrological processes and response to floods

This study developed an understanding of hydrological processes within the Cressbrook Creek catchment of the upper Brisbane River, in particular for the alluvial aquifers. Those aquifers within the lower catchment are used for intensive irrigation, and have been impacted by long-term drought followed by flooding. The study utilised water chemistry, isotopic characters and hydraulic measurements to determine factors such as recharge, links between creeks and groundwater, and variations in water quality. The catchment-wide study will enable improved management of the local water resources.

The emergent imperatives from a design-led innovation engagement within the mining industry

This research seeks a better and more detailed understanding of the processes of implementing design-led innovation in the mining equipment technology services (METS) sector, in a context where the traditional approach to manufacturing is being challenged. This longitudinal research specifically investigated the barriers to design-led innovation and opportunities that developed throughout this research, to understand how the organisation and culture of a METS company evolved, in order to progress towards design-led change. The significance of these findings is shown in the combined implementation of design imperatives leading towards design-led change at all business levels of an organisational structure.

Computation of Mathematical Models for Complex Industrial Processes

Designed for undergraduate and postgraduate students, academic researchers and industrial practitioners, this book provides comprehensive case studies on numerical computing of industrial processes and step-by-step procedures for conducting industrial computing. It assumes minimal knowledge in numerical computing and computer programming, making it easy to read, understand and follow. Topics discussed include fundamentals of industrial computing, finite difference methods, the Wavelet-Collocation Method, the Wavelet-Galerkin Method, High Resolution Methods, and comparative studies of various methods. These are discussed using examples of carefully selected models from real processes of industrial significance. The step-by-step procedures in all these case studies can be easily applied to other industrial processes without a need for major changes and thus provide readers with useful frameworks for the applications of engineering computing in fundamental research problems and practical development scenarios.

The plasticity of NBS resistance genes in sorghum is driven by multiple evolutionary processes

Background Increased disease resistance is a key target of cereal breeding programs, with disease outbreaks continuing to threaten global food production, particularly in Africa. Of the disease resistance gene families, the nucleotide-binding site plus leucine-rich repeat (NBS-LRR) family is the most prevalent and ancient and is also one of the largest gene families known in plants. The sequence diversity in NBS-encoding genes was explored in sorghum, a critical food staple in Africa, with comparisons to rice and maize and with comparisons to fungal pathogen resistance QTL. Results In sorghum, NBS-encoding genes had significantly higher diversity in comparison to non NBS-encoding genes and were significantly enriched in regions of the genome under purifying and balancing selection, both through domestication and improvement. Ancestral genes, pre-dating species divergence, were more abundant in regions with signatures of selection than in regions not under selection. Sorghum NBS-encoding genes were also significantly enriched in the regions of the genome containing fungal pathogen disease resistance QTL; with the diversity of the NBS-encoding genes influenced by the type of co-locating biotic stress resistance QTL. Conclusions NBS-encoding genes are under strong selection pressure in sorghum, through the contrasting evolutionary processes of purifying and balancing selection. Such contrasting evolutionary processes have impacted ancestral genes more than species-specific genes. Fungal disease resistance hot-spots in the genome, with resistance against multiple pathogens, provides further insight into the mechanisms that cereals use in the “arms race” with rapidly evolving pathogens in addition to providing plant breeders with selection targets for fast-tracking the development of high performing varieties with more durable pathogen resistance.

Identifying product families using data mining techniques in manufacturing paradigm

Identifying product families has been considered as an effective way to accommodate the increasing product varieties across the diverse market niches. In this paper, we propose a novel framework to identifying product families by using a similarity measure for a common product design data BOM (Bill of Materials) based on data mining techniques such as frequent mining and clus-tering. For calculating the similarity between BOMs, a novel Extended Augmented Adjacency Matrix (EAAM) representation is introduced that consists of information not only of the content and topology but also of the fre-quent structural dependency among the various parts of a product design. These EAAM representations of BOMs are compared to calculate the similarity between products and used as a clustering input to group the product fami-lies. When applied on a real-life manufacturing data, the proposed framework outperforms a current baseline that uses orthogonal Procrustes for grouping product families.

Teaching peer review reflective processes in accounting

A well designed peer review process in higher education subjects can lead to more confident and reflective learners who become skilled at making independent judgements of their own and others’ work; essential requirements for successful lifelong learning. The challenge for educators is to ensure their students gain these important graduate attributes within the constraints of a range of internal and external tensions currently facing higher education systems, including, respectively, the realities of large undergraduate Accounting subjects, culturally diverse and time-poor academics and students, and increased calls for public accountability of the Higher Education sector by groups such as the OECD. Innovative curriculum and assessment design and collaborative technologies have the capacity to simultaneously provide some measure of relief from these internal and external tensions and to position students as responsible partners in their own learning. This chapter reports on a two phase implementation of an online peer review process as part of the assessment in a large, under-graduate, International Accounting class. Phase One did not include explicit reflective strategies within the process, and anonymous and voluntary student views served to clearly highlight that students were ‘confused’ and ‘hesitant’ about moving away from their own ideas; often mistrusting the conflicting advice received from multiple peer reviewers. A significant number of students also felt that they did not have the skills to constructively review the work of their peers. Phase Two consequently utilised the combined power of e-Technology, peer review feedback and carefully scaffolded and supported reflective practices from Ryan and Ryan’s Teaching and Assessing Reflective Learning (TARL) model (see Chap. 2). Students found the reflective skills support workshop introduced in Phase Two to be highly useful in maximising the benefits of the peer review process, with 83 % reporting it supported them in writing peer reviews, while 90 % of the respondents reporting the workshop supported them in utilising peer and staff feedback.

The decision-making processes of early childhood teachers when working with children experiencing parental separation and divorce

In this study, the pedagogical decision-making processes of 21 Australian early childhood teachers working with children experiencing parental separation and divorce were examined. Transcripts from interviews and a focus group with teachers were analysed using grounded theory methodology. The findings showed that as teachers interacted with young children experiencing parental separation and divorce, they reported using strategic, reflexive pedagogical decision-making processes. These processes comprised five stages: (1) teachers constructing their knowledge; (2) teachers thinking about their knowledge; (3) teachers using decision-making schemas; (4) teachers taking action, and; (5) teachers monitoring action and evaluating. This understanding of teachers’ reflexive pedagogical decision-making is useful for identifying how teachers and educational leaders can support children experiencing parental separation and divorce or other life challenges.

Can’t we all just get along? A qualitative investigation of the cognitive processes motivating driver aggression.

Although driver aggression has been identified as contributing to crashes, current understanding of the fundamental causes of the behaviour is poor. Two key reasons for this are evident. Firstly, existing research has been largely atheoretical, with no unifying conceptual framework guiding investigation. Secondly, emphasis on observable behaviours has resulted in limited knowledge of the underlying thought processes that motivate behaviour. Since driving is fundamentally a social situation, requiring drivers to interpret on-road events, insight regarding these perception and appraisal processes is paramount in advancing understanding of the underlying causes. Thus, the current study aimed to explore the cognitive appraisal processes involved in driver aggression, using a conceptual model founded on the General Aggression Model (Anderson & Bushman, 2002). The present results reflect the first of several studies testing this model. Participants completed 3 structured driving diaries to explore perceptions and cognitions. Thematic analysis of diaries identified several cognitive themes. The first, ‘driving etiquette’ concerned an implied code of awareness and consideration for other motorists, breaches of which were strongly associated with reports of anger and frustration. Such breaches were considered intentional; attributed to dispositional traits of another driver, and precipitated the second theme, ‘justified retaliation’. This theme showed that drivers view their aggressive behaviour as warranted, to convey criticism towards another motorist’s etiquette violation. However, the third theme, ‘superiority’ suggested that those refraining from an aggressive response were motivated by a desire to perceive themselves as ‘better’ than the offending motorists. Collectively, the themes indicate deep-seated and complex thought patterns underlying driver aggression, and suggest the behaviour will be challenging to modify. Implications of these themes in relation to the proposed model will be discussed, and continued research will explore these cognitive processes further, to examine their interaction with person-related factors.