Efficiency or technology adoption: A case study in waste-treatment technology

Improvements in the effectiveness and efficiency of supply-side waste management are necessary in many countries. In Japan, municipalities with limited budgets have delayed the introduction of new waste-management technologies. Thus, the central government has used subsidies to encourage municipalities to adopt certain new technologies to improve waste-management efficiency. In this study, we measure the efficiency of waste management and explore how technology is related to technical efficiency. We find that municipalities are likely to adopt less-efficient technologies and that the central government's policies are likely to promote inefficient technology adoption by local governments.

Indian bank efficiency and productivity changes with undesirable outputs: A disaggregated approach

The objective of this study is to examine technical efficiency and productivity growth in the Indian banking sector over the period from 2004 to 2011. We apply an innovative methodological approach introduced by Chen et al. (2011) and Barros et al. (2012), who use a weighted Russell directional distance model to measure technical inefficiency. We further modify and extend that model to measure TFP change with NPLs. We find that the inefficiency levels are significantly different among the three ownership structure of banks in India. Foreign banks have strong market position in India and they pull the production frontier in a more efficient direction. SPBs and domestic private banks show considerably higher inefficiency. We conclude that the restructuring policy applied in the late 1990s and early 2000s by the Indian government has not had a long-lasting effect.

Selection criteria in the search for a sperm donor: Behavioural traits versus physical appearance

Despite extensive literature on female mate choice, empirical evidence on women’s mating preferences in the search for a sperm donor is scarce, even though this search, by isolating a male’s genetic impact on offspring from other factors like paternal investment, offers a naturally ”controlled” research setting. In this paper, we work to fill this void by examining the rapidly growing online sperm donor market, which is raising new challenges by offering women novel ways to seek out donor sperm. We not only identify individual factors that influence women’s mating preferences but find strong support for the proposition that behavioural traits (inner values) are more important in these choices than physical appearance (exterior values). We also report evidence that physical factors matter more than resources or other external cues of material success, perhaps because the relevance of good character in donor selection is part of a female psychological adaptation throughout evolutionary history. The lack of evidence on a preference for material resources, on the other hand, may indicate the ability of peer socialization and better access to resources to rapidly shape the female decision process. Overall, the paper makes useful contributions to both the literature on human behaviour and that on decision-making in extreme and highly important situations.

Commuting mode choice in transit oriented development: Disentangling the effects of competitive neighbourhoods, travel attitudes, and self-selection

This research identifies the commuting mode choice behaviour of 3537 adults living in different types of transit oriented development (TOD) in Brisbane by disentangling the effects of their “evil twin” transit adjacent developments (TADs), and by also controlling for residential self-selection, travel attitudes and preferences, and socio-demographic effects. A TwoStep cluster analysis was conducted to identify the natural groupings of respondents’ living environment based on six built environment indicators. The analysis resulted in five types of neighbourhoods: urban TODs, activity centre TODs, potential TODs, TADs, and traditional suburbs. HABITAT survey data were used to derive the commute mode choice behaviour of people living in these neighbourhoods. In addition, statements reflecting both respondents’ travel attitudes and living preferences were also collected as part of the survey. Factor analyses were conducted based on these statements and these derived factors were then used to control for residential self-selection. Four binary logistic regression models were estimated, one for each of the travel modes used (e.g. public transport, active transport, less sustainable transport such as the car/taxi, and other), to differentiate between the commuting behaviour of people living in the five types of neighbourhoods. The findings verify that urban TODs enhance the use of public transport and reduce car usage. No significant difference was found in the commuting behaviour between respondents living in traditional suburbs and TADs. The results confirm the hypothesis that TADs are the “evil twin” of TODs. The data indicates that TADs and the mode choices of residents in these neighbourhoods is a missed transport policy opportunity. Further policy efforts are required for a successive transition of TADs into TODs in order to realise the full benefits of these. TOD policy should also be integrated with context specific TOD design principles.

Costs assessor selection: A question of timing, or cost?

In Lessbrook Pty Ltd (in liq) v Whap; Stephen; Bowie; Kepa & Kepa [2014] QCA 63 the Queensland Court of Appeal dealt with significant questions of general application relating to the appointment of assessors to conduct an assessment of costs under the Uniform Civil Procedure Rules 1999 (Qld) (UCPR).

Re-engineering higher education for energy efficiency solutions

Emerging 21st century challenges require higher education institutions (HEIs) to play a key role in developing graduates and professionals, particularly in engineering and design, who can forge sustainable solutions. The trouble is there’s currently a significant lag in the preparedness of HEIs to provide the stream of professionals needed. Addressing energy efficiency competencies is one critical area.

The importance of group-fit in new director selection

Purpose Director selection is an important yet under-researched topic. The purpose of this paper is to contribute to extant literature by gaining a greater understanding into how and why new board members are recruited. Design/methodology/approach This exploratory study uses in-depth interviews with Australian non-executive directors to identify what selection criteria are deemed most important when selecting new director candidates and how selection practices vary between organisations. Findings The findings indicate that appointments to the board are based on two key attributes: first, the candidates’ ability to contribute complementary skills and second, the candidates’ ability to work well with the existing board. Despite commonality in these broad criteria, board selection approaches vary considerably between organisations. As a result, some boards do not adequately assess both criteria when appointing a new director hence increasing the chance of a mis-fit between the position and the appointed director. Research limitations/implications The study highlights the importance of both individual technical capabilities and social compatibility in director selections. The authors introduce a new perspective through which future research may consider director selection: fit. Originality/value The in-depth analysis of the director selection process highlights some less obvious and more nuanced issues surrounding directors’ appointment to the board. Recurrent patterns indicate the need for both technical and social considerations. Hence the study is a first step in synthesising the current literature and illustrates the need for a multi-theoretical approach in future director selection research.

Top-down influences on lexical selection during spoken word production: A 4T fMRI investigation of refractory effects in picture naming

Spoken word production is assumed to involve stages of processing in which activation spreads through layers of units comprising lexical-conceptual knowledge and their corresponding phonological word forms. Using high-field (4T) functional magnetic resonance imagine (fMRI), we assessed whether the relationship between these stages is strictly serial or involves cascaded-interactive processing, and whether central (decision/control) processing mechanisms are involved in lexical selection. Participants performed the competitor priming paradigm in which distractor words, named from a definition and semantically related to a subsequently presented target picture, slow picture-naming latency compared to that with unrelated words. The paradigm intersperses two trials between the definition and the picture to be named, temporally separating activation in the word perception and production networks. Priming semantic competitors of target picture names significantly increased activation in the left posterior temporal cortex, and to a lesser extent the left middle temporal cortex, consistent with the predictions of cascaded-interactive models of lexical access. In addition, extensive activation was detected in the anterior cingulate and pars orbitalis of the inferior frontal gyrus. The findings indicate that lexical selection during competitor priming is biased by top-down mechanisms to reverse associations between primed distractor words and target pictures to select words that meet the current goal of speech.

Best individual template selection from deformation tensor minimization

We study the influence of the choice of template in tensor-based morphometry. Using 3D brain MR images from 10 monozygotic twin pairs, we defined a tensor-based distance in the log-Euclidean framework [1] between each image pair in the study. Relative to this metric, twin pairs were found to be closer to each other on average than random pairings, consistent with evidence that brain structure is under strong genetic control. We also computed the intraclass correlation and associated permutation p-value at each voxel for the determinant of the Jacobian matrix of the transformation. The cumulative distribution function (cdf) of the p-values was found at each voxel for each of the templates and compared to the null distribution. Surprisingly, there was very little difference between CDFs of statistics computed from analyses using different templates. As the brain with least log-Euclidean deformation cost, the mean template defined here avoids the blurring caused by creating a synthetic image from a population, and when selected from a large population, avoids bias by being geometrically centered, in a metric that is sensitive enough to anatomical similarity that it can even detect genetic affinity among anatomies.

Feature overlap slows lexical selection: Evidence from the picture–word interference paradigm

How does the presence of a categorically related word influence picture naming latencies? In order to test competitive and noncompetitive accounts of lexical selection in spoken word production, we employed the picture–word interference (PWI) paradigm to investigate how conceptual feature overlap influences naming latencies when distractors are category coordinates of the target picture. Mahon et al. (2007. Lexical selection is not by competition: A reinterpretation of semantic interference and facilitation effects in the picture-word interference paradigm. Journal of Experimental Psychology. Learning, Memory, and Cognition, 33(3), 503–535. doi:10.1037/0278-7393.33.3.503) reported that semantically close distractors (e.g., zebra) facilitated target picture naming latencies (e.g., HORSE) compared to far distractors (e.g., whale). We failed to replicate a facilitation effect for within-category close versus far target–distractor pairings using near-identical materials based on feature production norms, instead obtaining reliably larger interference effects (Experiments 1 and 2). The interference effect did not show a monotonic increase across multiple levels of within-category semantic distance, although there was evidence of a linear trend when unrelated distractors were included in analyses (Experiment 2). Our results show that semantic interference in PWI is greater for semantically close than for far category coordinate relations, reflecting the extent of conceptual feature overlap between target and distractor. These findings are consistent with the assumptions of prominent competitive lexical selection models of speech production.

Brain network efficiency and topology depend on the fiber tracking method: 11 tractography algorithms compared in 536 subjects

As connectivity analyses become more popular, claims are often made about how the brain's anatomical networks depend on age, sex, or disease. It is unclear how results depend on tractography methods used to compute fiber networks. We applied 11 tractography methods to high angular resolution diffusion images of the brain (4-Tesla 105-gradient HARDI) from 536 healthy young adults. We parcellated 70 cortical regions, yielding 70×70 connectivity matrices, encoding fiber density. We computed popular graph theory metrics, including network efficiency, and characteristic path lengths. Both metrics were robust to the number of spherical harmonics used to model diffusion (4th-8th order). Age effects were detected only for networks computed with the probabilistic Hough transform method, which excludes smaller fibers. Sex and total brain volume affected networks measured with deterministic, tensor-based fiber tracking but not with the Hough method. Each tractography method includes different fibers, which affects inferences made about the reconstructed networks.

Magnetic nanoparticles boosting the osmotic efficiency of a polymeric FO draw agent: Effect of polymer conformation

Poly sodium acrylate (PSA)-coated Magnetic Nanoparticles (PSA-MNPs) were synthesized as smart osmotic draw agent (SMDA) for water desalination by forward osmosis (FO) process. The PSA-coated MNPs demonstrated significantly higher osmotic pressure (~ 30 fold) as well as high FO water flux (~ 2–3 fold) when compared to their polymer (polyelectrolyte) counterpart, even at a very low concentration of ~ 0.13 wt.% in the draw solution. The PSA polymer chain conformation – coiled to extended – demonstrates a significant impact on the availability of the polymer hydrophilic groups in solution which is the driving force to attain higher osmotic pressure and water flux. When an optimum concentration of the polymer was anchored to a NP surface, the polymer chains assume an extended open conformation making the functional hydrophilic groups available to attract water molecules. This in turn boosts the osmotic pressure and FO water flux of the PSA-MNP draw agents. The low concentration of the PSA-MNP osmotic agent and the associated high water flux enhances the cost-effectiveness of our proposed SMDA system. In addition, easier magnetic separation and regeneration of the SMDA also improves its usability making it efficient, cost-effective and environment-friendly.

Innovation in energy efficiency education for engineers

Energy efficiency as a concept has gained significant attention over the last few decades, as governments and industries around the world have grappled with issues such as rapid population growth and expanding needs for energy, the cost of supplying infrastructure for growing spikes in peak demand, the finite nature of fossil based energy reserves, and managing transition timeframes for expanding renewable energy supplies. Over the last decade in particular, there has been significant growth in understanding the complexity and interconnectedness of these issues, and the centrality of energy efficiency to the engineering profession. Furthermore, there has been a realisation amongst various government departments and education providers that associated knowledge and skill sets to achieve energy efficiency goals are not being sufficiently developed in vocational or higher education. Within this context, this poster discusses the emergence of a national energy efficiency education agenda in Australia, to support embedding such knowledge throughout the engineering curriculum, and throughout career pathways. In particular, the posterprovides insights into the national priorities for capacity building in Australia, and how this is influencing the engineering education community, from undergraduate education through to postgraduate studies and professional development. The poster is intended to assist in raising awareness about the central role of energy efficiency within engineering, significant initiatives by major government, professional, and training organisations, and the increasing availability of high quality energy efficiency engineering education resources. The authors acknowledge the support for and contributions to this poster by the federal Department of Resources, Energy and Tourism, through members of the national Energy Efficiency Advisory Group for engineering education.

Consultation: Energy efficiency and engineering education

This report provides the Commonwealth Department of Resources, Energy and Tourism (RET) with a summary of consultation undertaken with representatives from industry and academia around Australia regarding mainstreaming energy efficiency within engineering education. Specifically, the report documents the purpose of the consultation process, key messages and emerging themes, industry-perceived gaps in energy efficiency related knowledge and skills, and academic considerations regarding graduate attributes and learning pathways to close these gaps. This information complements previous reports by presenting the current thoughts and ideas of more than 100 engineering academic and practising professionals who are actively involved in building capacity through the education system or implementing energy efficiency improvements in companies/the workplace. Furthermore, the report describes the emergence of a potential ‘community of practice’ in energy efficiency capacity building that arose during the project.

State of Education for Energy Efficiency in Australian Engineering Education - Summary of Questionnaire Results

In 2007 the National Framework for Energy Efficiency provided funding for the first survey of energy efficiency education across all Australian universities teaching engineering education. The survey asked the question, ‘What is the state of education for energy efficiency in Australian engineering education?’. There was an excellent response to the survey, with 48 course responses from lecturers across 27 universities from every state and territory in Australia, and 260 student responses from 18 courses across 8 universities from all 6 states. It is concluded from the survey findings that the state of education for energy efficiency in Australian engineering education is currently highly variable and ad hoc across universities and engineering disciplines.