Pushing the boundaries' versus identifying the boundaries: An institutional perspective of NPM Principles

This paper considers the boundaries of new public management (NPM) principles in the context of the mandate for a commercial approach within in a New Zealand state-owned enterprise (SOE). Investigating a commercial approach to NPM through an institutional theory lens, the case study highlights complexities and potential conflict between structured NPM principles and the more complex reality. Analysis reveals blurred lines and boundaries have implications for public sector organisations such as SOEs, government and other stakeholders, where managers push the boundaries beyond the point where stakeholders are comfortable. Thus, a key challenge involves developing clearer institutional boundaries to balance freedoms with stakeholder acceptability.

Employee green behavior: A theoretical framework, multilevel review, and future research agenda

We propose a conceptual model based on person–environment interaction, job performance, and motivational theories to structure a multilevel review of the employee green behavior (EGB) literature and agenda for future research. We differentiate between required EGB prescribed by the organization and voluntary EGB performed at the employees’ discretion. The review investigates institutional-, organizational-, leader-, team-, and employee-level antecedents and outcomes of EGB and factors that mediate and moderate these relationships. We offer suggestions to facilitate the development of the field, and call for future research to adopt a multilevel perspective and to investigate the outcomes of EGB.

Creating employability skills in SMEs: Modification through interaction

This paper is concerned with the degree to which the graduate skills required by industry are developed in Australian universities. Despite acknowledgement of the need to increase the graduate skills of students, it would seem that the stated intentions of Australian universities in this respect do not yet meet the expectations of industry. The development of an enterprise program at the University of Tasmania provides by way of example, support that the development of industry-desired skills is possible alongside the desirable knowledge outcomes of a university. It is argued that lecturers and students must give and accept more responsibility for learning to enable the development of desirable graduate skills.

Institutional constraints on altruism in the formation of a venture idea

This thesis is about the social orientation of new venture ideas and how the degree of social orientation is influenced by the entrepreneur's level of altruism, by industry norms, and by nonprofit work experience. Potential entrepreneurs were asked to generate new venture ideas based on 3D-printing and their ideas were rated for degree of social orientation. It was found that while greater altruism leads to more socially-oriented venture ideas, the influence of altruism on the venture idea is constrained by the profit-maximization norm that is prevalent in most industries.

Social interaction and reflection for behaviour change

This article introduces the theme issue on social interaction and reflection for behaviour change. A large body of research exists on systems designed to help users in changing their behaviours, for instance, to exercise more regularly or to reduce energy consumption. Increasingly, these systems focus on multiple users, often to encourage open-ended reflection rather than prescribing a particular course of action. As background for this theme issue, this article presents a literature review on behaviour change support systems that focus on social interaction and reflection. The review highlights five key approaches amongst these systems: social traces, social support, collective use, reflection-in-action, and reflection-on-action. Each approach offers unique benefits, but also challenges for the design of behaviour change support systems. We highlight how the articles in this theme issue contribute to our current understanding of these five approaches, and beyond that, set out some broad directions for future work.

Unbounding the interaction design problem: The contribution of HCI in three interventions for well-being

In this paper we consider HCI's role in technology interventions for health and well-being. Three projects carried out by the authors are analysed by appropriating the idea of a value chain to chart a causal history from proximal effects generated in early episodes of design through to distal health and well-being outcomes. Responding to recent arguments that favour bounding HCI's contribution to local patterns of use, we propose an unbounded view of HCI that addresses an extended value chain of influence. We discuss a view of HCI methods as mobilising this value chain perspective in multi-disciplinary collaborations through its emphasis on early prototyping and naturalistic studies of use.

Capacity building of early career researchers through cross-institutional mentoring

Most early career researchers in the first five years following doctoral qualification are faced with research challenges and opportunities, which necessitate the ability to navigate and overcome barriers, and to identify and benefit from possibilities. In this chapter, the authors outline an intentional mentoring initiative aimed at building the capacity of early career researchers within the Excellence in Research in Early Years Education Collaborative Research Network (CRN) in Australia. The initiative involved partnering early career researchers with experienced researchers and the inclusion of an early career representative on the network planning committee. The chapter discusses the many benefits for the mentee arising from the initiative including increased publication, momentum and confidence, as well as exposure to new methodologies, theoretical frameworks, and productive collaborative partnerships. It is hoped, however, that the findings will be of relevance to similar and diverse (funded/unfunded) research programs and collaborative networks wherever mentoring is applied as a capacity building strategy to assist researchers.

Molecular modeling of Bt Cry1Ac (DI–DII)–ASAL (Allium sativum lectin)–fusion protein and its interaction with aminopeptidase N (APN) receptor of Manduca sexta

Genetic engineering of Bacillus thuringiensis (Bt) Cry proteins has resulted in the synthesis of various novel toxin proteins with enhanced insecticidal activity and specificity towards different insect pests. In this study, a fusion protein consisting of the DI–DII domains of Cry1Ac and garlic lectin (ASAL) has been designed in silico by replacing the DIII domain of Cry1Ac with ASAL. The binding interface between the DI–DII domains of Cry1Ac and lectin has been identified using protein–protein docking studies. Free energy of binding calculations and interaction profiles between the Cry1Ac and lectin domains confirmed the stability of fusion protein. A total of 18 hydrogen bonds was observed in the DI–DII–lectin fusion protein compared to 11 hydrogen bonds in the Cry1Ac (DI–DII–DIII) protein. Molecular mechanics/Poisson–Boltzmann (generalized-Born) surface area [MM/PB (GB) SA] methods were used for predicting free energy of interactions of the fusion proteins. Protein–protein docking studies based on the number of hydrogen bonds, hydrophobic interactions, aromatic–aromatic, aromatic–sulphur, cation–pi interactions and binding energy of Cry1Ac/fusion proteins with the aminopeptidase N (APN) of Manduca sexta rationalised the higher binding affinity of the fusion protein with the APN receptor compared to that of the Cry1Ac–APN complex, as predicted by ZDOCK, Rosetta and ClusPro analysis. The molecular binding interface between the fusion protein and the APN receptor is well packed, analogously to that of the Cry1Ac–APN complex. These findings offer scope for the design and development of customized fusion molecules for improved pest management in crop plants.

Calculations of the free energy of interaction of the c-Fos−c-Jun coiled coil: Effects of the solvation model and the inclusion of polarization effects

The leucine zipper region of activator protein-1 (AP-1) comprises the c-Jun and c-Fos proteins and constitutes a well-known coiled coil protein−protein interaction motif. We have used molecular dynamics (MD) simulations in conjunction with the molecular mechanics/Poisson−Boltzmann generalized-Born surface area [MM/PB(GB)SA] methods to predict the free energy of interaction of these proteins. In particular, the influence of the choice of solvation model, protein force field, and water potential on the stability and dynamic properties of the c-Fos−c-Jun complex were investigated. Use of the AMBER polarizable force field ff02 in combination with the polarizable POL3 water potential was found to result in increased stability of the c-Fos−c-Jun complex. MM/PB(GB)SA calculations revealed that MD simulations using the POL3 water potential give the lowest predicted free energies of interaction compared to other nonpolarizable water potentials. In addition, the calculated absolute free energy of binding was predicted to be closest to the experimental value using the MM/GBSA method with independent MD simulation trajectories using the POL3 water potential and the polarizable ff02 force field, while all other binding affinities were overestimated.

Intuitive interaction in a mixed reality system

Tangible physical systems are more intuitive than Intangible virtual Systems. Mixed reality systems are considered as an alternative to virtual systems, bringing advantages of tangible systems into an interaction. However, past research has mainly focussed on technical aspects of incorporating pervasive-ness and immersive-ness in the virtual systems. This paper reports on an empirical study of intuitive Interaction in a Mixed Reality game system for children and the design aspects that could facilitate intuitive Interaction in such systems. A related samples Friedman’s test showed that the Mixed Reality game system demonstrated more intuitive interactions than non-intuitive Interactions. A linear regression analysis further established that the variation in intuitive Interaction in the Mixed Reality system could be statistically significantly explained primarily by physical affordances offered by the Mixed Reality system and to a lesser extent by the perceived affordances in the system. Design guidelines to develop intuitive Mixed Reality systems are discussed. These guidelines should allow designers to exploit the wonders of advances in technology and at the same time allow users to directly interact with the physical real world. This will allow users to access maximal physical affordances, which are primary contributors to intuitive interaction in Tangible and Mixed Reality systems.

Reflections from East Asia's ageing population: An interaction designers' challenge

As Asia experiences the demographic imbalance between working and ageing populations, the need for attention in this area is highlighted. The shift of a country's age structure that results from people having small families and living long lives, where previously they had large families and lived short lives, results in more workers and fewer dependents creating economic growth, known as the demographic dividend. However for a generation after this bulge and dividend, a disproportionate number of older people must be supported by a smaller working population, a current concern in Asia with its rapidly growing number of older adults. This extended abstract draws practical and unique insights from three of the oldest and richest nations in Asia - Japan, South Korea and China, on the perspective of interactive technology design for older adults. ICT has powerful potential to ameliorate the imbalance in the population demographic through its potential to leverage various kinds of support. As HCI researchers, this is a challenge we embrace; a challenge for the ageing society of unique individuals to exploit the technologies that they have helped to create. The paper draws lessons from key sample studies, one from each country, which aimed to understand their ageing population. The insights for interaction designers are presented in the form of a practical set of reflections to guide the authors, who are in the early stages of research on technology design for older adults.

Investigation of the interaction between non-small cell lung cancer cells and immortalised normal bronchial epithelial cells

Non-small cell lung cancer consists of a diverse range of molecular and pathological features. This may be due in part to the critical interaction between normal and lung cancer cells. Consequently resulting in ‘normal’ cells acting in a malignant fashion. This project aims to identify pathways responsible for this altered ‘normal’ behaviour.

Participation in Urban Interaction Design for Civic Engagement

The future of civic engagement is characterised by both technological innovation as well as new technological user practices that are fuelled by trends towards mobile, personal devices; broadband connectivity; open data; urban interfaces; and cloud computing. These technology trends are progressing at a rapid pace, and have led global technology vendors to package and sell the “Smart City” as a centralised service delivery platform predicted to optimise and enhance cities’ key performance indicators – and generate a profitable market. The top-down deployment of these large and proprietary technology platforms have helped sectors such as energy, transport, and healthcare to increase efficiencies. However, an increasing number of scholars and commentators warn of another “IT bubble” emerging. Along with some city leaders, they argue that the top-down approach does not fit the governance dynamics and values of a liberal democracy when applied across sectors. A thorough understanding is required, of the socio-cultural nuances of how people work, live, play across different environments, and how they employ social media and mobile devices to interact with, engage in, and constitute public realms. Although the term “slacktivism” is sometimes used to denote a watered down version of civic engagement and activism that is reduced to clicking a “Like” button and signing online petitions, we believe that we are far from witnessing another Biedermeier period that saw people focus on the domestic and the non-political. There is plenty of evidence to the contrary, such as post-election violence in Kenya in 2008, the Occupy movements in New York, Hong Kong and elsewhere, the Arab Spring, Stuttgart 21, Fukushima, the Taksim Gezi Park in Istanbul, and the Vinegar Movement in Brazil in 2013. These examples of civic action shape the dynamics of governments, and in turn, call for new processes to be incorporated into governance structures. Participatory research into these new processes across the triad of people, place and technology is a significant and timely investment to foster productive, sustainable, and liveable human habitats. With this article, we want to reframe the current debates in academia and priorities in industry and government to allow citizens and civic actors to take their rightful centrepiece place in civic movements. This calls for new participatory approaches for co-inquiry and co-design. It is an evolving process with an explicit agenda to facilitate change, and we propose participatory action research (PAR) as an indispensable component in the journey to develop new governance infrastructures and practices for civic engagement. We do not limit our definition of civic technologies to tools specifically designed to simply enhance government and governance, such as renewing your car registration online or casting your vote electronically on election day. Rather, we are interested in civic media and technologies that foster citizen engagement in the widest sense, and particularly the participatory design of such civic technologies that strive to involve citizens in political debate and action as well as question conventional approaches to political issues. The rationale for this approach is an alternative to smart cities in a “perpetual tomorrow,” based on many weak and strong signals of civic actions revolving around technology seen today. It seeks to emphasise and direct attention to active citizenry over passive consumerism, human actors over human factors, culture over infrastructure, and prosperity over efficiency. First, we will have a look at some fundamental issues arising from applying simplistic smart city visions to the kind of a problem a city poses. We focus on the touch points between “the city” and its civic body, the citizens. In order to provide for meaningful civic engagement, the city must provide appropriate interfaces.