Ethnic differences in lipid metabolism in two groups of obese South African women

There is a higher prevalence of ischemic heart disease (IHD) in South African white than black women. The objective of this study was to determine biochemical explanations for this prevalence. The study group contained 15 obese black women (OBW) and 14 obese white women (OWW), ah premenopausal, who were examined after an overnight fast. Anthropometric measurements and blood concentrations of glucose, non-esterified fatty acids (NEFAs), catecholamines, plasminogen activator inhibitor-1, C-peptide, proinsulin, lipograms, cortisol, growth hormone, and post-heparin Lipoprotein Lipase activity were measured during an oral glucose tolerance test (OGTT), Body composition was measured using bioelectrical impedance analysis, and subcutaneous and visceral fat mass were assessed with CT-scans. Visceral fat area was higher in OWW (139.7 +/- 10.7 cm(2)) than in OBW (72.3 +/- 3.9 cm(2)) (P < 0.01), as were fasting and 3 h triglyceride concentrations (P < 0.05 for all). OWW also had higher NEFA levels than OBW at 3 and 4 h compared, with OBW (P < 0.05 for both). Fasting cortisol (266 +/- 24 vs. 197 +/- 19 nmol/l; P < 0.05) was higher in OWW than in OBW. These data demonstrate that OWW have higher visceral fat mass than OBW, which may lead to a more atherogenic fasting and postprandial Lipid profile. The higher cortisol levels of the OWW may promote visceral fat deposition. - Punyadeera, C., M-T. van der Merwe, N.J. Crowther, M. Toman, C. P. Schlaphoff, and I. P. Gray. Ethnic differences in lipid metabolism in two groups of obese South African women.

Porohyperelastic finite element model for the kangaroo humeral head cartilage based on experimental study and the consolidation theory

Solid-extracellular fluid interaction is believed to play an important role in the strain-rate dependent mechanical behaviors of shoulder articular cartilages. It is believed that the kangaroo shoulder joint is anatomically and biomechanically similar to human shoulder joint and it is easy to get in Australia. Therefore, the kangaroo humeral head cartilage was used as the suitable tissue for the study in this paper. Indentation tests from quasi-static (10-4/sec) to moderately high strain-rate (10-2/sec) on kangaroo humeral head cartilage tissues were conduced to investigate the strain-rate dependent behaviors. A finite element (FE) model was then developed, in which cartilage was conceptualized as a porous solid matrix filled with incompressible fluids. In this model, the solid matrix was modeled as an isotropic hyperelastic material and the percolating fluid follows Darcy’s law. Using inverse FE procedure, the constitutive parameters related to stiffness, compressibility of the solid matrix and permeability were obtained from the experimental results. The effect of solid-extracellular fluid interaction and drag force (the resistance to fluid movement) on strain-rate dependent behavior was investigated by comparing the influence of constant, strain dependent and strain-rate dependent permeability on FE model prediction. The newly developed porohyperelastic cartilage model with the inclusion of strain-rate dependent permeability was found to be able to predict the strain-rate dependent behaviors of cartilages.

OHS liability, corporate officers and corporate groups

This article examines the new model for corporate officer liability under section 144 of the Occupational Health and Safety Act 2004 (Vic), and explores the extent to which this might effectively extend responsibility for OHS offences to members of corporate groups, such as holding companies. In doing so, the authors canvass the failure of corporate law to impose such obligations on corporate officers in general, and on holding companies as shadow officers. It is argued that provisions such as section 144 of the Victorian Act should be included in all OHS legislation.

A simple vehicle for the transportation of a humanoid Nao robot

Locomotion and autonomy in humanoid robots is of utmost importance in integrating them into social and community service type roles. However, the limited range and speed of these robots severely limits their ability to be deployed in situations where fast response is necessary. While the ability for a humanoid to drive a vehicle would aide in increasing their overall mobility, the ability to mount and dismount a vehicle designed for human occupants is a non-trivial problem. To address this issue, this paper presents an innovative approach to enabling a humanoid robot to mount and dismount a vehicle by proposing a simple mounting bracket involving no moving parts. In conjunction with a purpose built robotic vehicle, the mounting bracket successfully allowed a humanoid Nao robot to mount, dismount and drive the vehicle.

Teaching spelling in the middle years : reviewing programs for diverse student groups

In what follows, I draw attention to understandings about the teaching of Standard Australian English spelling developed by being immersed in the URL project site for four years though sharing professional dialogue with teachers and educators and entering into informal conversations with some of the students and their parents. My understandings focus on the potential and problematics of oft-used generic spelling programs and approaches for student cohorts marked by social, cultural and linguistic diversity. This article concludes by considering two possible extensions to the word study approach that may have utility for working with middle years students from diverse backgrounds: creating a discursive ‘Third Space’ that overtly recognises students’ language experiences and the technique of colour blocking to create a visual stress.

Design after design to bridge between people living with cognitive or sensory impairments, their friends and proxies

A carer or teacher often plays the role of proxy or spokesperson for a person living with an intellectual disability or form of cognitive or sensory impairment. Our research undertook co-design with people living with cognitive and sensory impairments and their proxies in order to explore new ways of facilitating communication. We developed simple functioning interactive prototypes to support people with a diverse range of competencies to communicate and explore their use. Deployment of the prototypes enabled use, appropriation and design after design by our two participant groups; adults living with cognitive or sensory impairments and children identified with language delays and autism spectrum disorder. The prototypes supported concrete expression of likes, dislikes, capabilities, emotional wants and needs and forms of expression that hitherto had not been fostered, further informing design. Carers and designers were surprised at the ways in which the technology was used and how it fostered new forms of social interaction and expression. We elaborate on how design after design can be an effective approach for engaging people living with intellectual disabilities, giving them greater capacity for expression and power in design and offering the potential to expand and deepen their social relationships.

Comparative studies made simple in GPFlow

This work describes recent extensions to the GPFlow scientific workflow system in development at MQUTeR (www.mquter.qut.edu.au), which facilitate interactive experimentation, automatic lifting of computations from single-case to collection-oriented computation and automatic correlation and synthesis of collections. A GPFlow workflow presents as an acyclic data flow graph, yet provides powerful iteration and collection formation capabilities.

A simple nutrition screening tool for paediatric inpatients

Background: Pediatric nutrition risk screening tools are not routinely implemented throughout many hospitals, despite prevalence studies demonstrating malnutrition is common in hospitalized children. Existing tools lack the simplicity of those used to assess nutrition risk in the adult population. This study reports the accuracy of a new, quick, and simple pediatric nutrition screening tool (PNST) designed to be used for pediatric inpatients. Materials and Methods: The pediatric Subjective Global Nutrition Assessment (SGNA) and anthropometric measures were used to develop and assess the validity of 4 simple nutrition screening questions comprising the PNST. Participants were pediatric inpatients in 2 tertiary pediatric hospitals and 1 regional hospital. Results: Two affirmative answers to the PNST questions were found to maximize the specificity and sensitivity to the pediatric SGNA and body mass index (BMI) z scores for malnutrition in 295 patients. The PNST identified 37.6% of patients as being at nutrition risk, whereas the pediatric SGNA identified 34.2%. The sensitivity and specificity of the PNST compared with the pediatric SGNA were 77.8% and 82.1%, respectively. The sensitivity of the PNST at detecting patients with a BMI z score of less than -2 was 89.3%, and the specificity was 66.2%. Both the PNST and pediatric SGNA were relatively poor at detecting patients who were stunted or overweight, with the sensitivity and specificity being less than 69%. Conclusion: The PNST provides a sensitive, valid, and simpler alternative to existing pediatric nutrition screening tools such as Screening Tool for the Assessment of Malnutrition in Pediatrics (STAMP), Screening Tool Risk on Nutritional status and Growth (STRONGkids), and Paediatric Yorkhill Malnutrition Score (PYMS) to ensure the early detection of hospitalized children at nutrition risk.

Molecular camouflage : making use of protecting groups to control the self-assembly of inorganic janus particles onto metal–chalcogenide nanotubes by Pearson Hardness

Hard and soft: Binding of inorganic Pt@Fe3O4 Janus particles to WS2 nanotubes through their Pt or Fe3O4 domains is governed by the difference in Pearson hardness: the soft Pt block has a higher sulfur affinity than the harder magnetite face; thus the binding proceeds preferentially through the Pt face. This binding preference can be reversed by masking the Pt face with an organic protecting group.

Navigating uncertainty in Australia : fostering informed citizenship through teaching controversial issues with pre-service teachers

Australia is a multicultural immigrant society created by public policy and direct state action over a period of two hundred years. It is now one of the world’s most diverse societies. However, like many nations, Australia faces challenges to managing ‘unauthorized arrivals’ who claim to be refugees. The issue of how to deal with unauthorized arrivals is controversial and highly emotive as it challenges public policy and government capacity to manage the multicultural ‘mix’ of Australia’s population. It also raises questions about border security. Given that it is impossible to discern beforehand who is a ‘proper’ refugee and who is not, claims to refugee status by unauthorised arrivals in Australia need to be tested against international convention criteria devised by the United Nations High Commissioner for Refugees (UNHCR). There are no simple solutions to controversial questions such as how and where should unauthorised arrivals, and the children accompanying them, be housed whilst their claims are investigated? Moreover, as this issue continues to prompt division and heated debate in Australian society, teachers new to the profession are often reluctant to explore it in the classroom. However, there are opportunities in national and state curriculum documents for the values dimensions of curriculum inquiries into controversial issues such as this to be addressed. For example, the most recent national statement on the goals for schooling in Australia, the Melbourne Declaration (MCEETYA, 2008), makes clear that Australian students need to be prepared for the challenges of the 21st century and to develop the capacity for innovation and complex problem-solving. The Melbourne Declaration informs the first national curriculum to be implemented in the Australian states and territories, and all other national and state initiatives. Its focus on developing active and informed citizens who can contribute to a socially cohesive society implies a capacity to deal with a range of issues associated with cultural diversity, This chapter explores the ways in which pre-service and early career teachers in one Australian state reflect upon curriculum opportunities to address controversial issues in the social sciences and history classroom. As part of their pre-service education, all the participants in this study completed a final year social science curriculum method unit that embedded a range of controversial issues, including the placement of children in Australian Immigration Detention Centres (IDCs), for investigation. By drawing from interviews and focus groups conducted with different cohorts of pre-service teachers in their final year of university study and beginning years of teaching, this chapter analyses the range of perceptions about how controversial issues can be examined in the secondary classroom as part of fostering informed citizenship. The discussion and analysis of the qualitative data in this study makes no claims for the representativeness of its findings, rather, a range of beginner teacher insights into a complex and important facet of teaching in a period of change and uncertainty is offered.

Adaptive finite element analysis of elliptic problems based on bubble-type local mesh generation

A new mesh adaptivity algorithm that combines a posteriori error estimation with bubble-type local mesh generation (BLMG) strategy for elliptic differential equations is proposed. The size function used in the BLMG is defined on each vertex during the adaptive process based on the obtained error estimator. In order to avoid the excessive coarsening and refining in each iterative step, two factor thresholds are introduced in the size function. The advantages of the BLMG-based adaptive finite element method, compared with other known methods, are given as follows: the refining and coarsening are obtained fluently in the same framework; the local a posteriori error estimation is easy to implement through the adjacency list of the BLMG method; at all levels of refinement, the updated triangles remain very well shaped, even if the mesh size at any particular refinement level varies by several orders of magnitude. Several numerical examples with singularities for the elliptic problems, where the explicit error estimators are used, verify the efficiency of the algorithm. The analysis for the parameters introduced in the size function shows that the algorithm has good flexibility.

Finite element analysis of CFRP strengthened steel hollow sections under tension

This paper presents a nonlinear finite element (FE) model for the analysis of very high strength (VHS) steel hollow sections wrapped by high modulus carbon fibre rein forced polymer (CFRP) sheets. The bond strength of CFRP wrapped VHS circular steel hollow section under tension is investigated using the FE model. The three dimensional FE model by Nonlinear static analysis has been carried out by Strand 7 finite element software. The model is validated by the experimental data obtained from Fawzia et al [1]. A detail parametric study has been performed to examine the effect of number of CFRP layers, different diameters of VHS steel tube and different bond lengths of CFRP sheet. The analytical model developed by Fawzia et al. [1] has been used to determine the load carrying capacity of different diameters of CFRP strengthened VHS steel tube by using the capacity from each layer of CFRP sheet. The results from FE model have found in reasonable agreement with the analytical model developed by Fawzia et al [1]. This validation was necessary because the analytical model by Fawzia et al [1] was developed by using only one diameter of VHS steel tube and fixed (five) number of CFRP layers. It can be concluded that the developed analytical model is valid for CFRP strengthened VHS steel tubes with diameter range of 38mm to 100mm and CFRP layer range of 3 to 5 layers. Based on the results it can also be concluded that the effective bond length is consistent for different diameters of steel tubes and different layers of CFRP. Three layers of CFRP is considered most effective wrapping scheme due to the cost effectiveness. Finally the distribution of longitudinal and hoop stress has been determined by the finite element model for different diameters of CFRP strengthened VHS steel tube.

Explicit finite element modelling of bridge girder bearing pedestals

Bridge girder bearings rest on pedestals to transfer the loading safely to the pier headstock. In spite of the existence of industry guidelines, due to construction complexities, such guidelines are often overlooked. Further, there is paucity of research on the performance of pedestals, although their failure could cause exorbitant maintenance costs. Although reinforced concrete pedestals are recommended in the industry design guidelines, unreinforced concrete and/ or epoxy glue pedestals are provided due to construction issues; such pedestals fail within a very short period of service. With a view to understanding the response of pedestals subject to monotonic loading, a three-dimensional nonlinear explicit finite element micro-model of unreinforced and reinforced concrete pedestals has been developed. Contact and material nonlinearity have been accounted for in the model. It is shown that the unreinforced concrete pedestals suffer from localised edge stress singularities, the failure of which was comparable to those in the field. The reinforced concrete pedestals, on the other hand, distribute the loading without edge stress singularity, again conforming to the field experience.

Comparison of eight published lumbar spine finite element models

Due to its ability to represent intricate systems with material nonlinearities as well as irregular loading, boundary, geometrical and material domains, the finite element (FE) method has been recognized as an important computational tool in spinal biomechanics. Current FE models generally account for a single distinct spinal geometry with one set of material properties despite inherently large inter-subject variability. The uncertainty and high variability in tissue material properties, geometry, loading and boundary conditions has cast doubt on the reliability of their predictions and comparability with reported in vitro and in vivo values. A multicenter study was undertaken to compare the results of eight well-established models of the lumbar spine that have been developed, validated and applied for many years. Models were subjected to pure and combined loading modes and their predictions were compared to in vitro and in vivo measurements for intervertebral rotations, disc pressures and facet joint forces. Under pure moment loading, the predicted L1-5 rotations of almost all models fell within the reported in vitro ranges; their median values differed on average by only 2° for flexion-extension, 1° for lateral bending and 5° for axial rotation. Predicted median facet joint forces and disc pressures were also in good agreement with previously published median in vitro values. However, the ranges of predictions were larger and exceeded the in vitro ranges, especially for facet joint forces. For all combined loading modes, except for flexion, predicted median segmental intervertebral rotations and disc pressures were in good agreement with in vivo values. The simulations yielded median facet joint forces of 0 N in flexion, 38 N in extension, 14 N in lateral bending and 60 N in axial rotation that could not be validated due to the paucity of in vivo facet joint forces. In light of high inter-subject variability, one must be cautious when generalizing predictions obtained from one deterministic model. This study demonstrates however that the predictive power increases when FE models are combined together. The median of individual numerical results can hence be used as an improved tool in order to estimate the response of the lumbar spine.

Finite element modeling of carbon fibre reinforced polymer (CFRP) strengthened steel tubes under axial impact

Steel hollow sections used in structures such as bridges, buildings and space structures involve different strengthening techniques according to their structural purpose and shape of the structural member. One such technique is external bonding of CFRP sheets to steel tubes. The performance of CFRP strengthening for steel structures has been proven under static loading while limited studies have been conducted on their behaviour under impact loading. In this study, a comprehensive numerical investigation is carried out to evaluate the response of CFRP strengthened steel tubes under dynamic axial impact loading. Impact force, axial deformation impact velocities are studied. The results of the numerical investigations are validated by experimental results. Based on the developed finite element (FE) model several output parameters are discussed. The results show that CFRP wrapping is an effective strengthening technique to increase the axial dynamic load bearing capacity by increasing the stiffness of the steel tube.