The application of BESS in load shedding scheme

With new developments in battery technologies, increasing application of Battery Energy Storage System (BESS) in power system is anticipated in near future. BESS has already been used for primary frequency regulation in the past. This paper examines the feasibility of using BESS with load shedding, in application for large disturbances in power system. Load shedding is one of the conventional ways during large disturbances, and the performance of frequency control will increase in combination with BESS application. According to the latest news, BESS which are applied in high power side will be employed in practice in next 5 year. A simple low order SMR model is used as a test system, while an incremental model of BESS is applied in this paper. As continuous disturbances are not the main concern in this paper, df/dt is not considered in article.

Load leveling in LV network using coordianted Energy Storage Units

This paper proposes a new distributed coordination approach to make load leveling, using Energy Storage Units (ESUs) in LV network. The proposed distributed control strategy is based on consensus algorithm which shares the required active power equally among the ESUs with respect to their rating. To show the effectiveness of the proposed approach, a typical radial LV network is simulated as a case study.

Attracting and retaining specialist teachers and non-teaching professionals in Queensland secondary schools : a report to the Queensland Department of Education and Training

This report provides the Queensland Department of Education and Training (DET) with independent evidence based data to enable the identification of barriers and enablers to effective attraction and retention of suitably qualified people to specialist teaching and non‐teaching roles in Queensland secondary schools. The scope of this report is to consider the strategic imperatives, trends, and drivers as they apply to the recruitment and retention of specialised teachers and non‐teaching professionals. The research was specifically designed to inform DET on innovative and novel strategies to recruit and retain staff within Education Queensland in areas specifically identified as at risk of experiencing shortages in the near future. Those areas considered to be at risk of experiencing shortages included: • Teaching principals • Specialist teachers in mathematics, science, industrial technology and design, and special education • Non‐teaching professional roles, such as speech pathologists, occupational therapists, physiotherapists and registered nurses providing services in schools to students with special needs.

Load profile based determination of distribution feeder configuration by dynamic programming

This paper presents a new method to determine feeder reconfiguration scheme considering variable load profile. The objective function consists of system losses, reliability costs and also switching costs. In order to achieve an optimal solution the proposed method compares these costs dynamically and determines when and how it is reasonable to have a switching operation. The proposed method divides a year into several equal time periods, then using particle swarm optimization (PSO), optimal candidate configurations for each period are obtained. System losses and customer interruption cost of each configuration during each period is also calculated. Then, considering switching cost from a configuration to another one, dynamic programming algorithm (DPA) is used to determine the annual reconfiguration scheme. Several test systems were used to validate the proposed method. The obtained results denote that to have an optimum solution it is necessary to compare operation costs dynamically.

Transitioning from vocational education and training to university : strengthening information literacy through collaboration

"Students transitioning from vocational education and training (VET) to university can experience a number of challenges. This small research project explored the information literacy needs of VET and university students and how they differ. Students studying early childhood related VET and university courses reported differences in how and where they searched for information in their studies. These differences reflect the more practical focus of VET compared with the more academic and theoretical approach of university. The author proposes a framework of support that could be provided to transitioning students to enable them to develop the necessary information literacy skills for university study."--publisher website

Successful outcomes in vocational education and training courses and mathematics: how pedagogy and expectations influence achievement

This paper reports on a four year Australian Research Council funded Linkage Project titled Skilling Indigenous Queensland, conducted in regional areas of Queensland, Australia from 2009 to 2013. The project sought to investigate Vocational Education and Training (VET) and teaching, Indigenous learners’ needs, employer culture and expectations and community culture and expectations to identify best practice in numeracy teaching for Indigenous VET learners. Specifically it focused on ways to enhance the teaching and learning of courses and the associated mathematics in such courses to benefit learners and increase their future opportunities of employment. To date thirty - nine teachers/trainers/teacher aides and two hundred and thirty - one students consented to participate in the project. Nine VET courses offered in schools and Technical and Further Education Institutes (TAFE) were nominated to be the focus on the study. This paper focuses on student questionnaire responses and interview responses from teachers/trainers one high school principal and five students as a result of these processes, the findings indicated that VET course teachers work hard to adopt contextualising strategies to their teaching; however this process is not always straight forward because of the perceptions of how mathematics has been taught and learned by trainers and teachers. Further teachers, trainers and students have high expectations of one another with the view to successful outcomes from the courses.

Web crippling tests of hollow flange channel beams – end one flange and interior one flange load cases

LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. The LSBs were commonly used as floor joists and bearers with web openings in residential, industrial and commercial buildings. Due to the unique geometry of LSBs, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSBs. Many research studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear and combined actions. However, to date, no investigation has been conducted into the web crippling behaviour and strength of LSB sections. Hence detailed experimental studies were conducted to investigate the web crippling behaviour and strengths of LSBs under EOF (End One Flange) and IOF (Interior One Flange) load cases. A total of 26 web crippling tests was conducted and the results were compared with current AS/NZS 4600 design rules. This comparison showed that AS/NZS 4600 (SA, 2005) design rules are very conservative for LSB sections under EOF and IOF load cases. Suitable design equations have been proposed to determine the web crippling capacity of LSBs based on experimental results. This paper presents the details of this experimental study on the web crippling behaviour and strengths of LiteSteel beams under EOF and IOF load cases.

Web crippling tests of hollow flange channel beams : ETF AND ITF load cases

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel Beam (LSB) subject to web crippling actions (ETF and ITF). Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear actions and combined actions. To date, however, no investigation has been conducted into the web crippling behaviour and strength of LSB sections under ETF and ITF load conditions. Hence experimental studies were conducted to assess the web crippling behaviour and strengths of LSBs. Twenty eight web crippling tests were conducted and the results were compared with the current AS/NZS 4600[1] and AISI S100 [2]design equations. Comparison of the ultimate web crippling capacities from tests showed that AS/NZS 4600[1] and AISI S100 [2] design equations are unconservative for LSB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs. Suitable design rules were also developed under the DSM format.

Innovations in dietetic training in foodservice management : can early exposure to practice enhance final year competency development?

Student engagement in the delivery of theoretical course materials is a current challenge in the tertiary sector including for dietetic training. In 2011 with the creation of a new nutritionist position for Queensland Meals on Wheels (QMOW), a service learning approach to support this organisation was used with third year dietetic students undertaking two days of structured activities at various QMOW sites in South East Queensland, aligned with coursework in Foodservice Management (FSM). This cohort of students was then followed in their final year post successful completion of five weeks professional practice in FSM to see if this experience supported readiness for placement and competency development. Evaluation was undertaken of eligible students (n = 50) via paper based survey (response rate 94%) with all participating in targeted focus groups. Findings showed that students acknowledged the QMOW experience (on reflection 14 months later) providing opportunity for participation and/or observation in 5 of 12 FSM areas taught in third year, including food safety, meal production, assembly, delivery and dishwashing. Over half the students identified good exposure to FSM competency areas during the QMOW experience, with 83% satisfied with their competency exposure and subsequent practice during final year placements. A consistent theme emerged from focus groups supporting inclusion of practical opportunities with the theoretical component of the FSM subject to highlight relevance to learning. These findings highlight the importance of such teaching initiatives to met student learning preferences, linking theory with practice and supporting competency development in the final year of training programs.

Pushing cultural competence boundaries in nutrition and dietetics training

A health workforce ready for safe practice is a government priority, and particularly critical to support indigenous communities closing ‘the gap’. Increased pressure exists on dietetic training programs for quality placements, with fewer opportunities for immersion in Aboriginal and Torres Strait Islander communities to demonstrate cultural competence. In 2012, Queensland University of Technology established a partnership with Apunipima Cape York Health Council with 56 weeks of dietetic placement for 8 students provided to achieve these aims. Clinical practice in Community Public Health Nutrition (CPHN) was structured in a standard 6 week placement, with Individual Case Management (ICM) and Foodservice Management (FSM) integrated across 8 weeks (4 each), with an additional 2 weeks ICM prior in a metropolitan indigenous health service. Students transitioned from urban to rural then remote sites, with new web-based technologies used for support. Strong learning opportunities were provided, with CPHN projects in antenatal and child health, FSM on standardisation of procedures in a 22 bed health facility, and ICM exposing students to a variety of cases via hospital in/outpatients, general clinics and remote community outreach. Supervisor focus group evaluation was positive, with CPHN and FSM enhancing capacity of service. Student focus group evaluation revealed placements exceeded expectations, with rating high, and strong confidence in cultural competence described. Students debriefed final and third year cohorts on their experiences, with increased awareness and enthusiasm for work with indigenous communities indicated by groups. With the success of this partnership, placements are continuing 2013, and new boundaries in dietetic training established.

Mindfulness-meditation on the move : implementation of an ACT-based mindfulness practice intervention and training within a University Dance program

As part of the introduction of a broader dance medicine and science related health and wellbeing program, a 9 week mindfulness-meditation ACT-based program was delivered to all students undertaking full-time University dance training (N = 106). The aim of the program was to assist students in the further development of performance psychology skills that could be applied in both performance and non-performance settings. Participant groups were comprised of both male (N = 12) and female (N = 94) students from across all three year levels of two undergraduate dance courses, divided into three groups by mixed year levels due to timetable scheduling requirements. Pre- and post-testing was undertaken utilising the Mindful Attention Awareness Scale (MAAS-15), a uni-dimensional measure of mindfulness, in addition to qualitative questions checking the current level of awareness and understanding of mindfulness practice and its application. Weekly sessions were conducted by qualified sport and exercise psychologists and covered key practices such as: Mindfulness of Body, Mindfulness of Breathing, Mindfulness of Sounds, ACT-based and general Imagery exercises, Developing Open Awareness, Mindfulness of Emotions, and Developing Inner Stillness. Students were required to maintain a reflective journal that was utilised at the end of each weekly session, in addition to completion of a mid-Semester reflective debrief. Teaching staff additionally attended the weekly sessions and linked the mindfulness practice learnings into the student’s practical dance and academic classes where appropriate. Anecdotal feedback indicates that participation in the mindfulness-meditation sessions and the development of these mental skills has resulted in positive performance and personal outcomes. Observations collated from staff and students, results from the data collection phases and recommendations regarding future applications within dance training settings will be discussed within the presentation.

Non-linear model predictive control for UAVs with slung/swung load

Suspended loads on UAVs can provide significant benefits to several applications in agriculture, law enforcement and construction. The load impact on the underlying system dynamics should not be neglected as significant feedback forces may be induced on the vehicle during certain flight manoeuvres. Much research has focused on standard multi-rotor position and attitude control with and without a slung load. However, predictive control schemes, such as Nonlinear Model Predictive Control (NMPC), have not yet been fully explored. To this end, we present software and flight system architecture to test controller for safe and precise operation of multi-rotors with heavy slung load in three dimensions.

Directing experience : an exploration of active analysis and visual cognition theory in the training of contemporary directors

The focus of this research is the creation of a stage-directing training manual on the researcher's site at the National Institute of Dramatic Art. The directing procedures build on the work of Stanislavski's Active Analysis and findings from present-day visual cognition studies. Action research methodology and evidence-based data collection are employed to improve the efficacy of both the directing procedures and the pedagogical manual. The manual serves as a supplement to director training and a toolkit for the more experienced practitioner. The manual and research findings provide a unique and innovative contribution to the field of theatre directing.

Diophantine equations as a context for technology-enhanced training in conjecturing and proving

Solving indeterminate algebraic equations in integers is a classic topic in the mathematics curricula across grades. At the undergraduate level, the study of solutions of non-linear equations of this kind can be motivated by the use of technology. This article shows how the unity of geometric contextualization and spreadsheet-based amplification of this topic can provide a discovery experience for prospective secondary teachers and information technology students. Such experience can be extended to include a transition from a computationally driven conjecturing to a formal proof based on a number of simple yet useful techniques.

Fire performance and design of load bearing light gauge steel frame wall systems exposed to realistic design fires

This paper presents the fire performance results of light gauge steel frame (LSF) walls lined with single and double plasterboards, and externally insulated with rock fibre insulation as obtained using a finite element analysis based parametric study. A validated numerical model was used to study the influence of various fire curves developed for a range of compartment characteristics. Data from the parametric study was utilized to develop a simplified method to predict the fire resistance ratings of LSF walls exposed to realistic design fire curves. Further, this paper also presents the details of suitable fire design rules based on current cold-formed steel standards and the modifications proposed by previous researchers. Of these the recently developed design rules by Gunalan and Mahendran [1] were investigated to determine their applicability to predict the axial compression strengths and fire resistance ratings (FRR) of LSF walls exposed to realistic design fires. Finally, the stud failure times obtained from fire design rules and finite element studies were compared for LSF walls lined with single and double plasterboards, and externally insulated with rock fibres under realistic design fire curves.