Liminal moments : designing, thinking and learning

This paper provides a contextual reflection for understanding best practice teaching to first year design students. The outcome (job) focussed approach to higher education has lead to some unanticipated collateral damage for students, and in the case we discuss, has altered the students’ expectations of course delivery with specific implications and challenges for design educators. This tendency in educational delivery systems is further compounded by the distinct characteristics of Generation Y students within a classroom context. It is our belief that foundational design education must focus more on process than outcomes, and through this research with first year design students we analyse and raise questions relative to the curriculum for a Design and Creative Thinking course—in which students not only benefit from learning the theories and processes of design thinking, conceptualisation and creativity, but also are encouraged to see it as an essential tool for their education and development as designers. This study considers the challenges within a design environment; specifically, we address the need for process based learning in contrast to the outcome-focused approach taken by most students. With this approach, students simultaneously learn to be a designer and rethink their approach to “doing design”.

Electromechanical wave in power systems : theory and applications

The continuum model is a key paradigm describing the behavior of electromechanical transients in power systems. In the past two decades, much research work has been done on applying the continuum model to analyze the electromechanical wave in power systems. In this work, the uniform and non-uniform continuum models are first briefly described, and some explanations borrowing concepts and tools from other fields are given. Then, the existing approaches of investigating the resulting wave equations are summarized. An application named the zero reflection controller based on the idea of the wave equations is next presented.

Power transfer and mode transitions in low-frequency inductively coupled plasmas

Operation and mode jumps in low-frequency (500 kHz) radio-frequency inductively coupled plasmas are investigated. The discharge is driven by a flat inductive coil which can excite the electrostatic (E) and electromagnetic (H) discharge modes. The power transfer efficiency and mode transition behavior are studied. It is found that the power reflection coefficient as a function of the input power is minimal in the vicinity of the mode transitions and exhibits hysteresis, which is also observed when the operating gas pressure is varied.

Excitation of surface plasmon-polariton waves at a semiconductor-metal interface

The excitation of surface plasmon-polariton waves propagating across an external magnetic field (Voigt geometry) in a semiconductor-metal structure by means of the attenuated total reflection method is investigated. The phase matching conditions for the surface waves excitation in the Kretchmann configuration are derived and analyzed. The effect of different nonlinearities on the excitation of the surface waves is studied as well.

Víctimas de un experimento: Conflicto multicultural en el programa de oportunidades

This article presents a reflection of the application of multiculturality principles into tertiary educational programs at the University of Los Andes, Bogota Colombia. The main focus of this paper is debating the concept of 'positive discrimination' as a challenge taken by educational centres in societies with cultural diversity populations.

Bistable regime of surface magnetoplasma waves excitation at a semiconductor-metal interface

The theoretical analysis of the bistability associated with the excitation of surface magnetoplasma waves (SWs) propagating across an external magnetic field at the semiconductor-metal interface by the attenuated total reflection (ATR) method is presented. The Kretschmann-Raether configuration of the ATR method is considered, i.e. a plane electromagnetic wave is incident onto a metal surface through a coupling prism. The third-order nonlinearity of the semiconductor medium is considered in the general form using the formalism of the third-order nonlinear susceptibilities and of the perturbation theory. The examples of the nonlinear mechanisms which influence the SW propagation are given. The analytical and numerical analyses show that the realization of bistable regimes of the SW excitation is possible. The SW amplitude values providing bistability in the structure are evaluated and are reasonably low to provide the experimental observation.

The SEA-CALIPSO volcano imaging experiment at Montserrat : plans, campaigns at sea and on land, scientific results, and lessons learned

Since 1995 the eruption of the andesitic Soufrière Hills Volcano (SHV), Montserrat, has been studied in substantial detail. As an important contribution to this effort, the Seismic Experiment with Airgunsource-Caribbean Andesitic Lava Island Precision Seismo-geodetic Observatory (SEA-CALIPSO) experiment was devised to image the arc crust underlying Montserrat, and, if possible, the magma system at SHV using tomography and reflection seismology. Field operations were carried out in October–December 2007, with deployment of 238 seismometers on land supplementing seven volcano observatory stations, and with an array of 10 ocean-bottom seismometers deployed offshore. The RRS James Cook on NERC cruise JC19 towed a tuned airgun array plus a digital 48-channel streamer on encircling and radial tracks for 77 h about Montserrat during December 2007, firing 4414 airgun shots and yielding about 47 Gb of data. The main objecctives of the experiment were achieved. Preliminary analyses of these data published in 2010 generated images of heterogeneous high-velocity bodies representing the cores of volcanoes and subjacent intrusions, and shallow areas of low velocity on the flanks of the island that reflect volcaniclastic deposits and hydrothermal alteration. The resolution of this preliminary work did not extend beyond 5 km depth. An improved three-dimensional (3D) seismic velocity model was then obtained by inversion of 181 665 first-arrival travel times from a more-complete sampling of the dataset, yielding clear images to 7.5 km depth of a low-velocity volume that was interpreted as the magma chamber which feeds the current eruption, with an estimated volume 13 km3. Coupled thermal and seismic modelling revealed properties of the partly crystallized magma. Seismic reflection analyses aimed at imaging structures under southern Montserrat had limited success, and suggest subhorizontal layering interpreted as sills at a depth of between 6 and 19 km. Seismic reflection profiles collected offshore reveal deep fans of volcaniclastic debris and fault offsets, leading to new tectonic interpretations. This chapter presents the project goals and planning concepts, describes in detail the campaigns at sea and on land, summarizes the major results, and identifies the key lessons learned.

Applying academagogy : the transference of an organised heuristic teaching approach to the digital realm

Much has been written about transferring class materials and teaching techniques to digital platforms, but less has been written about applying heuristic organizing constructs in the same manner. With the transformation of learning ecologies over the past decades as well as requirements to adjust to constantly shifting digital tools and environments, the challenges for learning facilitators are to readily adapt and change, as well as to engage a changing learner demographic. However, most importantly is to engage most effectively with learners in these online environments. This article reviews the existing literature in the heuristic construct of academagogy [1] and applies a case study methodology to discussion of the first application of academagogy to the online delivery of an undergraduate design unit. Through a focus on effective teaching and learning techniques, the transfer from face-to-face (f2f) to the digital realm is explored through four main focal points: Tools for teaching, teaching and learning, communicating with students, and effective teaching methods. These four focal points are then used to discuss ways to meet the challenges of teaching online including how they create new dimensions in teaching practice and how the digital experience changes learning experiences. The article concludes with reflection and consolidation of the similarities and differences between the face-to-face and digital deliveries, and by suggesting changes to the academagogic heuristic to enable its use more easily in a digital space.

Doctoral research training : encouraging timely completion – case study reflections of one university on how it supports a vibrant research training culture

This is a case study of a young university striving to generate and sustain a vibrant Research Training culture. The university’s research training framework is informed by a belief in a project management approach to achieving successful research candidature. This has led to the definition and reporting of key milestones during candidature. In turn, these milestones have generated a range of training programs to support Higher Degree Research (HDR) students to meet these milestones in a timely fashion. Each milestone focuses on a specific set of skills blended with supporting the development of different parts of the doctoral thesis. Data on student progress and completion has provided evidence in highlighting the role that the milestones and training are playing in supporting timely completion. A university-wide reporting cycle generated data on the range of workshops and training provided to Higher Degree Research students and supervisors. The report provided details of thesis topic and format, as well as participation in research training events and participant evaluation of those events. Analysis of the data led to recommendations and comments on the strengths and weaknesses of the current research training program. Discussion considered strategies and drivers for enhancements into the future. In particular, the paper reflects on the significant potential role of centrally curated knowledge systems to support HDR student and supervisor access, and engagement and success. The research training program was developed using blended learning as a model. It covered face-to-face workshops as well as online modules. These were supplemented by web portals that offered a range of services to inform and educate students and supervisors and included opportunities for students to interact with each other. Topics ranged from the research life cycle, writing and publication, ethics, managing research data, managing copyright, and project management to use of software and the University’s Code of Conduct for Research. The challenges discussed included: How to reach off campus students and those studying in external modes? How best to promote events to potential participants? How long and what format is best for face-to-face sessions? What online resources best supplement face-to-face offerings? Is there a place for peer-based learning and what form should this take? These questions are raised by a relatively young university seeking to build and sustain a vibrant research culture. The rapid growth in enrolments in recent years has challenged previous one-to-one models of support. This review of research training is timely in seeking strategies to address changing research training support capacity and student needs. Part of the discussion will focus on supervisory training, noting that good supervision is the one remaining place where one-to-one support is provided. Ensuring that supervisors are appropriately equipped to address student expectations is considered in the context of the research training provisions. The paper concludes with reflection on the challenges faced, and recommended ways forward as the number of research students grows into the future.

Using collaborative and activity-based learning for engaging IT students

Active and collaborative learning are becoming essential strategies to attract, engage and retain students. These methods have been adopted within the Science and Engineering Faculty of Queensland University of Technology for use in its Science, Information Technology and Engineering degrees. This paper describes the adoption and application of these techniques in a specific first year unit in a new Bachelor of Information Technology degree which has majors in Computer Science and Information Systems. The paper reports on the design, development and implementation of this foundation subject and discusses how it uses active and collaborative learning to teach design thinking through a series of design challenges, and how it uses critiquing and reflection to ensure that students become more aware of design and team processes.

Design research for the real world : a design-led innovation model for action research

The aim of this paper is to aid researchers in undertaking action research within industry with a particular focus on the study of design-led innovation. This paper presents the research design of a case study shaped to solve real world problems concerning a major Australian Airport Corporation by bridging the chasm between academia and industry. The researcher’s role is one of design-innovation catalyst, facilitating the integration of design as a new strategic capability and innovation approach within an organisation’s fabric. A discussion of the researcher experience within industry will provide evidence on the challenges facing such a research role, with strategies for overcoming these barriers presented. Based on the authors’ experience as a researcher within industry and reflection within practice, a project progression model for action research is presented to enable the improved management of industry based research.

My System of Career Influences MSCI (Adult) Workbook

NOTE: This client booklet is to be used in conjunction with the MSCI (Adult) Facilitators Guide. Career development in the 21st century presents many challenges and opportunities. Throughout your life you will make countless decisions and experience numerous transitions. Each decision may be subject to a range of influences, for example people we know may give us an opinion, we may be attracted to a particular place or a particular salary, or we may simply want a change. No two people will have the same pattern of influences. The My System of Career Influences MSCI (Adult) is a qualitative career assessment reflection process based on recent developments in theory and practice. It uses a constructivist view and encourages a narrative and story-based approach to your career development. It has been used successfully with employees by career development practitioners working in a range of businesses and organisations from large to small and in one-on-one career counselling sessions as well as in a group setting.

The New Lawyer

This text is designed to implement the Threshold Learning Outcomes (TLOs) for law in the first year, and to incorporate Sally Kift’s First Year Curriculum principles: http://tls.vu.edu.au/portal/site/trans/Resources/KiftTransitonPedagogySixPrinciples_16Nov09.pdf This is a learning-centered text book intentionally designed for first year students and written by experts in legal education and the first year experience. It is written in a tone and style that engages and communicates effectively with first year law students, without compromising its rigour. It provides students with opportunities to contextualise and make sense of their learning by connecting that learning with what they already know, and with current contemporary issues and affairs. This work is designed to ease students through the transition from a diverse variety of backgrounds (such as high school, work or other disciplines) to the first year of law. It provides practical guidance about adjusting to law school and to university. Students are asked to regularly reflect upon why they are studying law. The book also prepares law students for success in their latter year studies in law by ensuring that they are equipped with the necessary threshold concepts and foundational skills to do well: for example, research skills (particularly, online research skills), reasoning skills, written communication skills, negotiation skills, and self-management skills. A range of practical tips on studying law are provided throughout the book. The work also asks students to engage with developing an emergent sense of professional identity – including what it means to ‘think like a lawyer’. In supporting the students to engage with the concept of professional identity, the work begins a process of preparing students for transition from law school to legal practice. This is achieved by providing explanations of how the material being presented relates to the practice of law, as well as practical information relating to employability skills as a new graduate. This work has a number of learning and teaching objectives to enhance the quality of student learning in their first year of law by engaging, motivating and supporting that learning. First, the work is designed to engage first year students with their legal education and with a future sense of professional identity. It does this through its: • Dynamic writing style • Engaging format • Inclusion of contemporary issues and events • Flowcharts, checklists, mind-maps, tables and timelines • Inclusion of real-world problems and dilemmas. Second, the text motivates student learning by promoting active learning. It does this by: • Demonstrating, and asking students to practice, what they need to do – that is, the work is not simply focussed on telling students what they need to know • Including regular self-directed learning exercises throughout each chapter, such as practical exercises for the development of important foundational legal skills • Including exercises that promote student collaboration, and that require students to apply their learning to practical situations, and • Incorporating a range of interesting active thinking points and research activities. Third, the book supports student learning by encouraging reflective learning and independent learning. It does this by including: • Specific content on how to be a reflective practitioner and an independent learner • Exercises that require students to engage in independent learning, particularly in relation to legal research skill development • Exercises requiring students to reflect upon what they have learned, and encouraging students to keep a reflective learning journal • Exercises requiring students to reflect upon their own views and beliefs • Reflection on whether students have achieved the learning objectives articulated at the beginning of the chapter. The work also: • Demonstrates respect for student experiences, views, opinions and values • Acknowledges student diversity • Recognises the importance of being globally minded law students and lawyers • Supports law teachers in using the work in their classrooms through the provision of comprehensive teaching materials.

Thoughts make the world

Thoughts Make the World is a synchronised two-channel video with sound. On the right-hand screen, a young man and woman exchange timeworn philosophical phrases and existential questions. On the left-hand screen, a guitarist plays a soundtrack that slowly builds over time. As the actors’ quest for meaning struggles toward an unresolved end, the guitarist launches into a climactic, liberating solo, eclipsing their somewhat-labored attempts to understand existence. By contrasting these verbal and non-verbal signifiers of self-reflection and self-expression, Thoughts Make the World questions how and where to grapple with enduring existential problems in a context dominated by the pre-packaged formats of popular culture and ironic modes of individualised response.

Young people and citizenship-delayed, diminished and empty?

This paper is presented in workshop format in order to meet the style and themes of the conference, and seeks to explore as fully as possible with participants issues, concerns and proposals around the discourse of young people and citizenship. This paper takes the position that the relationship between young people and citizenship is complex and in places contradictory, and while Ruth Lister (1998), argues for an 'inclusionary potential', a central concern is that the citizenship that young people get is as Hartley Dean (1997), suggests, at best 'ambiguous', and at its worst, 'diminished'. Under not so new Labour, the term has according to Gail Lewis (1998) re-emerged as a 'category of political articulation', imbued with the pronouncements of Charles Murray (1995) on the underclass, and Amitai Etzioni (1996), on the virtues of Communitarianism and the central assertion that in relation to young people and certain communities, 'rights have exceeded responsibilities'. This body of opinion has proved to be seductive to a government dedicated to joined up solutions in the battle against social exclusion and to the reconfiguration of the welfare state to place the onus for welfare and social provision on to individuals and communities. Those who work with young people and young people themselves may wish to be proactive in asserting the kind of citizenship they require, rights-based, expansive and supportive, rather than accept an imposed version devoid of rights but full to the brim of authoritarian measures, vindictive proposals and narrow horizons. This paper will engender debate and reflection and offer a context of the erosion of young people's rights over the last 20 years, Hartley Dean (1996), and will consider the work of T.H. Marshall (1950) in dividing citizenship into three elements: the civil element, the political element, and the social element. The paper will explore in workshop tradition, strategies and proposals for action relevant to practitioners and academics, such as the reduction in the voting age to 16.