A suitable method for journal bearing wear measurement

Purpose – Ideally, there is no wear in hydrodynamic lubrication regime. A small amount of wear occurs during start and stop of the machines and the amount of wear is so small that it is difficult to measure with accuracy. Various wear measuring techniques have been used where out-of-roundness was found to be the most reliable method of measuring small wear quantities in journal bearings. This technique was further developed to achieve higher accuracy in measuring small wear quantities. The method proved to be reliable as well as inexpensive. The paper aims to discuss these issues. Design/methodology/approach – In an experimental study, the effect of antiwear additives was studied on journal bearings lubricated with oil containing solid contaminants. The test duration was too long and the wear quantities achieved were too small. To minimise the test duration, short tests of about 90 min duration were conducted and wear was measured recording changes in variety of parameters related to weight, geometry and wear debris. The out-of-roundness was found to be the most effective method. This method was further refined by enlarging the out-of-roundness traces on a photocopier. The method was proved to be reliable and inexpensive. Findings – Study revealed that the most commonly used wear measurement techniques such as weight loss, roughness changes and change in particle count were not adequate for measuring small wear quantities in journal bearings. Out-of-roundness method with some refinements was found to be one of the most reliable methods for measuring small wear quantities in journal bearings working in hydrodynamic lubrication regime. By enlarging the out-of-roundness traces and determining the worn area of the bearing cross-section, weight loss in bearings was calculated, which was repeatable and reliable. Research limitations/implications – This research is a basic in nature where a rudimentary solution has been developed for measuring small wear quantities in rotary devices such as journal bearings. The method requires enlarging traces on a photocopier and determining the shape of the worn area on an out-of-roundness trace on a transparency, which is a simple but a crude method. This may require an automated procedure to determine the weight loss from the out-of-roundness traces directly. This method can be very useful in reducing test duration and measuring wear quantities with higher precision in situations where wear quantities are very small. Practical implications – This research provides a reliable method of measuring wear of circular geometry. The Talyrond equipment used for measuring the change in out-of-roundness due to wear of bearings indicates that this equipment has high potential to be used as a wear measuring device also. Measurement of weight loss from the traces is an enhanced capability of this equipment and this research may lead to the development of a modified version of Talyrond type of equipment for wear measurements in circular machine components. Originality/value – Wear measurement in hydrodynamic bearings requires long duration tests to achieve adequate wear quantities. Out-of-roundness is one of the geometrical parameters that changes with progression of wear in a circular shape components. Thus, out-of-roundness is found to be an effective wear measuring parameter that relates to change in geometry. Method of increasing the sensitivity and enlargement of out-of-roundness traces is original work through which area of worn cross-section can be determined and weight loss can be derived for materials of known density with higher precision.

Living well with diabetes: 24-month outcomes from a randomized trial of telephone-delivered weight loss and physical activity intervention to improve glycemic control

OBJECTIVE: To evaluate the effectiveness of a telephone-delivered behavioral weight loss and physical activity intervention targeting Australian primary care patients with type 2 diabetes. RESEARCH DESIGN AND METHODS: Pragmatic randomized controlled trial of telephone counseling (n = 151) versus usual care (n = 151). Reported here are 18-month (end-of-intervention) and 24-month (maintenance) primary outcomes of weight, moderate-to-vigorous-intensity physical activity (MVPA; via accelerometer), and HbA1c level. Secondary outcomes include dietary energy intake and diet quality, waist circumference, lipid levels, and blood pressure. Data were analyzed via adjusted linear mixed models with multiple imputation of missing data. RESULTS: Relative to usual-care participants, telephone counseling participants achieved modest, but significant, improvements in weight loss (relative rate [RR] -1.42% of baseline body weight [95% CI -2.54 to -0.30% of baseline body weight]), MVPA (RR 1.42 [95% CI 1.06-1.90]), diet quality (2.72 [95% CI 0.55-4.89]), and waist circumference (-1.84 cm [95% CI -3.16 to -0.51 cm]), but not in HbA1c level (RR 0.99 [95% CI 0.96-1.02]), or other cardio-metabolic markers. None of the outcomes showed a significant change/deterioration over the maintenance period. However, only the intervention effect for MVPA remained statistically significant at 24 months. CONCLUSIONS: The modest improvements in weight loss and behavior change, but the lack of changes in cardio-metabolic markers, may limit the utility, scalability, and sustainability of such an approach.

Optimizing the quantum dot: Plasmon interaction in a nano gap waveguide

Spontaneous emission (SE) of a Quantum emitter depends mainly on the transmission strength between the upper and lower energy levels as well as the Local Density of States (LDOS)[1]. When a QD is placed in near a plasmon waveguide, LDOS of the QD is increased due to addition of the non-radiative decay and a plasmonic decay channel to free space emission[2-4]. The slow velocity and dramatic concentration of the electric field of the plasmon can capture majority of the SE into guided plasmon mode (Гpl ). This paper focused on studying the effect of waveguide height on the efficiency of coupling QD decay into plasmon mode using a numerical model based on finite elemental method (FEM). Symmetric gap waveguide considered in this paper support single mode and QD as a dipole emitter. 2D simulation models are done to find normalized Гpl and 3D models are used to find probability of SE decaying into plasmon mode ( β) including all three decay channels. It is found out that changing gap height can increase QD-plasmon coupling, by up to a factor of 5 and optimally placed QD up to a factor of 8. To make the paper more realistic we briefly studied the effect of sharpness of the waveguide edge on SE emission into guided plasmon mode. Preliminary nano gap waveguide fabrication and testing are already underway. Authors expect to compare the theoretical results with experimental outcomes in the future

Bayesian predictive modeling and comparison of oil samples

Statistical comparison of oil samples is an integral part of oil spill identification, which deals with the process of linking an oil spill with its source of origin. In current practice, a frequentist hypothesis test is often used to evaluate evidence in support of a match between a spill and a source sample. As frequentist tests are only able to evaluate evidence against a hypothesis but not in support of it, we argue that this leads to unsound statistical reasoning. Moreover, currently only verbal conclusions on a very coarse scale can be made about the match between two samples, whereas a finer quantitative assessment would often be preferred. To address these issues, we propose a Bayesian predictive approach for evaluating the similarity between the chemical compositions of two oil samples. We derive the underlying statistical model from some basic assumptions on modeling assays in analytical chemistry, and to further facilitate and improve numerical evaluations, we develop analytical expressions for the key elements of Bayesian inference for this model. The approach is illustrated with both simulated and real data and is shown to have appealing properties in comparison with both standard frequentist and Bayesian approaches

Changes in lycopene and beta carotene contents in aril and oil of gac fruit during storage

Gac fruits were physically measured and stored under ambient conditions for up to 2 weeks to observe changes in carotenoid contents (lycopene and beta carotene) in its aril. Initial concentrations in the aril of lycopene were from 2.378 mg/g fresh weight (FW) to 3.728 mg/g FW and those of beta carotene were from 0.257 to 0.379 mg/g FW. Carotenoid concentrations in the aril remained stable after 1 week but sharply declined after 2 weeks of storage. Gac oil, pressed from gac aril, has similar concentrations of lycopene and beta carotene (2.436 and 2.592 mg/g, respectively). Oil was treated with 0.02% of butylated hydroxytoluene, or with a stream of nitrogen or untreated then stored in the dark for up to 15 or 19 weeks under different temperatures (5 °C, ambient, 45 and 60 °C). Lycopene and beta carotene in control gac oil degraded following the first-order kinetic model. The degradation rate of lycopene and beta carotene in the treated oil samples were lower than that in the control oil but the first-order kinetic was not always followed. However, both lycopene and beta carotene degraded quickly in gac oil with the first-order kinetic under high temperature conditions (45 and 60 °C) regardless of the treatments used. © 2009 Elsevier Ltd. All rights reserved.

Domestic reflections, electric reflections: Towards design interventions against everyday energy mundanity in the home

For many years, Human-Computer Interaction and interaction design researchers have been exploring the potential for interactive technologies to encourage sustainable living practices. This paper examines existing literature concerning domestic energy feedback, interlacing past examples of domestic interventions into the discussion. It synthesises recent design research conducted around domestic energy-use and provides a discussion into household circumstances, everyday activities, and the use and role of design. The themes presented are threefold. First, the individual is contrasted to the household collective and in turn calls for the scope and scale of design interventions to be geared towards connection between household members. The second theme questions the everyday, and proposes new avenues of thought when designing for the mundanity of everyday life. Finally, I propose that a design approach which counteracts an affirmative design approach, such as critical design, is an appropriate fit when critiquing and evaluating the mundane, everyday aspects of domestic life.

Using smartphones for cycling safety: A survey of riders preferences and interest in new technologies

Cyclists are among the most vulnerable road users. Many recent interventions have aimed at improving their safety on the road, such as the minimum overtaking distance rule introduced in Queensland in 2014. Smartphones offer excellent opportunities for technical intervention for road safety at a limited cost. Indeed, they have a lot of available processing power and many embedded sensors that allow analysing a rider's (or driver's) motion, behaviour, and environment; this is especially relevant for cyclists, as they do not have the space or power allowance that can be found in most motor vehicles. The aim of the study presented in this paper is to assess cyclists’ support for a range of new smartphone-based safety technologies. The preliminary results for an online survey with cyclists recruited from Bicycle Queensland and Triathlon Queensland, with N=191, are presented. A number of innovative safety systems such as automatic logging of incidents without injuries, reporting of dangerous area via a website/app, automatic notification of emergency services in case of crash or fall, and advanced navigation apps were assessed. A significant part of the survey is dedicated to GoSafeCycle, a cooperative collision prevention app based on motion tracking and Wi-Fi communications developed at CARRS-Q. Results show a marked preference toward automatic detection and notification of emergencies (62-70% positive assessment) and GoSafeCycle (61.7% positive assessment), as well as reporting apps (59.1% positive assessment). Such findings are important in the context of current promotion of active transports and highlight the need for further development of system supported by the general public.

Covitality constructs as predictors of psychological well-being and depression for secondary school students'

This study was an examination of the strength of relations among covitality, and its underlying constructs of belief in self, emotional competence, belief in others, and engaged living, and two outcome variables; subjective well-being and depression. Participants included 361 Australian secondary school students (75 males and 286 females) who completed a series of online questionnaires related to positive psychological well-being in adolescents. The results from the first standard multiple regression analysis indicated that higher levels of belief in self, belief in others, and engaged living were significant predictors of increased subjective well-being. The results from the second standard multiple regression showed that higher levels of belief in self, belief in others, and engaged living were significant predictors of decreased feelings of depression. In both standard multiple regression models, the combined effect of the traits that comprise covitality was greater than the effect of each individual positive psychological trait.

The use of animation to promote student learning about the importance of mental well-being for tertiary study success

It is now widely acknowledged that student mental well-being is a critical factor in the tertiary student learning experience and is important to student learning success. The issue of student mental well-being also has implications for effective student transition out of university and into the world of work. It is therefore vital that intentional strategies are adopted by universities both within the formal curriculum, and outside it, to promote student well-being and to work proactively and preventatively to avoid a decline in student psychological well-being. This paper describes how the Queensland University of Technology Law School is using animation to teach students about the importance for their learning success of the protection of their mental well-being. Mayer and Moreno (2002) define an animation as an external representation with three main characteristics: (1) it is a pictorial representation, (2) it depicts apparent movement, and (3) it consists of objects that are artificially created through drawing or some other modelling technique. Research into the effectiveness of animation as a tool for tertiary student learning engagement is relatively new and growing field of enquiry. Nash argues, for example, that animations provide a “rich, immersive environment [that] encourages action and interactivity, which overcome an often dehumanizing learning management system approach” (Nash, 2009, 25). Nicholas states that contemporary millennial students in universities today, have been immersed in animated multimedia since their birth and in fact need multimedia to learn and communicate effectively (2008). However, it has also been established, for example through the work of Lowe (2003, 2004, 2008) that animations can place additional perceptual, attentional, and cognitive demands on students that they are not always equipped to cope with. There are many different genres of animation. The dominant style of animation used in the university learning environment is expository animation. This approach is a useful tool for visualising dynamic processes and is used to support student understanding of subjects and themes that might otherwise be perceived as theoretically difficult and disengaging. It is also a form of animation that can be constructed to avoid any potential negative impact on cognitive load that the animated genre might have. However, the nature of expository animation has limitations for engaging students, and can present as clinical and static. For this reason, the project applied Kombartzky, Ploetzner, Schlag, and Metz’s (2010) cognitive strategy for effective student learning from expository animation, and developed a hybrid form of animation that takes advantage of the best elements of expository animation techniques along with more engaging short narrative techniques. First, the paper examines the existing literature on the use of animation in tertiary educational contexts. Second, the paper describes how animation was used at QUT Law School to teach students about the issue of mental well-being and its importance to their learning success. Finally, the paper analyses the potential of the use of animation, and of the cognitive strategy and animation approach trialled in the project, as a teaching tool for the promotion of student learning about the importance of mental well-being.

Does a twin pregnancy have a greater impact on physical and emotional well-being than a singleton pregnancy?

A prospective, population-based study was conducted to assess the impact of twin pregnancy on a woman's physical and emotional well-being. It compared women's reports of their general health, experience of a range of specific symptoms, and emotional well-being during pregnancy using the Edinburgh Postnatal Depression Scale. The subjects were 147 women expecting twins and 11,061 women expecting a single child who completed questionnaires at both 20 and 32 weeks’gestation as part of the Avon Longitudinal Study of Pregnancy and Childhood. Results suggested that women expecting twins experienced poorer physical well-being but not poorer emotional well-being than those expecting a single child, even though a significant association between poor health and emotional well-being was found for the population as a whole. It was suggested that the transitory nature of a twin pregnancy, the “special’ status of a twin pregnancy, greater social support, and modified expectations about health may buffer the effects of poor physical health on emotional well-being in a twin pregnancy. The findings should alert those who care for women expecting twins to the greater physical stress these women may feel.

The effects of psychosocial factors on the emotional well-being of women during pregnancy: A cross-cultural study of Britain and Greece

The effects of life events, social support and the emotional well-being of partner on the emotional well-being of the mother during pregnancy was examined within the cultural contexts of Britain and Greece. It was proposed that social support, impact of life events and relationship of the mother with her partner would be affected by the different social structures of each culture and would influence emotional well-being. A sample of 200 Greek and 156 British mothers and their partners completed questionnaires which included a life event inventory, measure of social support and measure of emotional well-being (Crown-Crisp Experiential Index). Greek mothers were found to score significantly higher on measures of depression, anxiety and somaticism, experience more stressful life events (most relating to family issues) and report feeling less supported than British mothers. Life events, particularly those relating to family stresses were found to predict poor emotional well-being among Greek mothers. For British mothers, social support was the strongest predictor of emotional well-being. Findings were discussed in the light of differences in social structure and it was suggested that future research might focus on the disruption of established social support structures rather than the differences in availability of social support per se when considering maternal emotional well-being.

The effects of psychosocial factors on the mother's emotional well-being during early parenthood: A cross-cultural study of Britain and Greece

The effect of psychosocial factors on the emotional well-being of mothers following childbirth were examined within the cultural contexts of Britain and Greece. These mothers had already completed questionnaires during pregnancy and were contacted a second time in the postpartum period. At 4–6 weeks postpartum a sample of 165 Greek mothers and 101 British mothers and their partners completed the Edinburgh Postnatal Depression Scale. The relationship between mothers' EPDS scores and measures of emotional well-being in pregnancy (CCEI), social support, life events, fathers' EPDS score, and father's perception of change in partner was examined in each culture. No difference in the distribution of EPDS scores in each culture was found. Social support and life events were found to predict postnatal depression in both cultures. Additionally, in Greece, emotional well-being in pregnancy made a separate contribution to prediction. The major difference between the two cultures was in the relationship between mothers and their partners. Greek fathers were more emotionally and physically distanced from their partners during pregnancy, birth and early parenthood and perceived their partners as being more changed by the transition to parenthood. These differences were not reflected in differences in emotional well-being possibly because they accord with social expectation in each culture.

Developing a best practice pathway to support improvements in Indigenous Australians' mental health and well-being: A qualitative study

Objective: There is a need to adapt pathways to care to promote access to mental health services for Indigenous people in Australia. This study explored Indigenous community and service provider perspectives of well-being and ways to promote access to care for Indigenous people at risk of depressive illness. Design: A participatory action research framework was used to inform the development of an agreed early intervention pathway; thematic analysis Setting: 2 remote communities in the Northern Territory. Participants: Using snowball and purposive sampling, 27 service providers and community members with knowledge of the local context and the diverse needs of those at risk of depression were interviewed. 30% of participants were Indigenous. The proposed pathway to care was adapted in response to participant feedback. Results: The study found that Indigenous mental health and well-being is perceived as multifaceted and strongly linked to cultural identity. It also confirms that there is broad support for promotion of a clear pathway to early intervention. Key identified components of this pathway were the health centre, visiting and community-based services, and local community resources including elders, cultural activities and families. Enablers to early intervention were reported. Significant barriers to the detection and treatment of those at risk of depression were identified, including insufficient resources, negative attitudes and stigma, and limited awareness of support options. Conclusions: Successful early intervention for wellbeing concerns requires improved understanding of Indigenous well-being perspectives and a systematic change in service delivery that promotes integration, flexibility and collaboration between services and the community, and recognises the importance of social determinants in health promotion and the healing process. Such changes require policy support, targeted training and education, and ongoing promotion.

Understanding coal seam gas associated water, regulations and strategies for treatment

The coal seam gas (CSG) industry is globally of potentially great importance economically. This study exemplifies the complex relationship between land use and management, groundwater impact and associated water treatment especially in relation to Queensland where a significant increase in the amount of gas extracted over the past 6 years has occurred. In order to effectively manage the environmental impact of the CSG industry it is necessary to appropriately understand the nature of the gas deposits, methods for gas collection, the physicochemical composition of the by-product associated water and the technologies available for water remediation. Australia is mainly considered arid and semi-arid and thus there is a need to not only beneficially reuse water resources but also protect existing ground water reservoirs such as the Great Artesian Basin (GAB). This paper focussed primarily on the Surat Basin located in Queensland and northern New South Wales. The mechanism for CSG formation, relation to local geological features, extraction approach and the potential impact/benefits of associated water was discussed. An outline of the current legislative requirements on physical and chemical properties of associated water in the Surat Basin was also provided, as well as the current treatment technologies used by the major CSG companies. This review was of significance in relation to the formulation of the most appropriate and cost effective management of associated water, while simultaneously preserving existing water resources and the environment.