Analysis of human immunodeficiency virus type 1 drug resistance in children receiving nucleoside analogue reverse-transcriptase inhibitors plus nevirapine, nelfinavir, or ritonavir (Pediatric AIDS Clinical Trials Group 377)

In Pediatric AIDS Clinical Trials Group 377, antiretroviral therapy-experienced children were randomized to 4 treatment arms that included different combinations of stavudine, lamivudine (3TC), nevirapine (Nvp), nelfinavir (Nfv), and ritonavir (Rtv). Previous treatment with zidovudine (Zdv), didanosine (ddI), or zalcitabine (ddC) was acceptable. Drug resistance ((R)) mutations were assessed before study treatment (baseline) and at virologic failure. Zdv(R), ddI(R), and ddC(R) mutations were detected frequently at baseline but were not associated with virologic failure. Children with drug resistance mutations at baseline had greater reductions in virus load over time than did children who did not. Nvp(R) and 3TC(R) mutations were detected frequently at virologic failure, and Nvp(R) mutations were more common among children receiving 3-drug versus 4-drug Nvp-containing regimens. Children who were maintained on their study regimen after virologic failure accumulated additional Nvp(R) and 3TC(R) mutations plus Rtv(R) and Nfv(R) mutations. However, Rtv(R) and Nfv(R) mutations were detected at unexpectedly low rates.

Drink and drug driving in Australian young adult users and non-users of illicit stimulants

- Introduction There is limited understanding of how young adults’ driving behaviour varies according to long-term substance involvement. It is possible that regular users of amphetamine-type stimulants (i.e. ecstasy (MDMA) and methamphetamine) may have a greater predisposition to engage in drink/drug driving compared to non-users. We compare offence rates, and self-reported drink/drug driving rates, for stimulant users and non-users in Queensland, and examine contributing factors. - Methods The Natural History Study of Drug Use is a prospective longitudinal study using population screening to recruit a probabilistic sample of amphetamine-type stimulant users and non-users aged 19-23 years. At the 4 ½ year follow-up, consent was obtained to extract data from participants’ Queensland driver records (ATS users: n=217, non-users: n=135). Prediction models were developed of offence rates in stimulant users controlling for factors such as aggression and delinquency. - Results Stimulant users were more likely than non-users to have had a drink-driving offence (8.7% vs. 0.8%, p < 0.001). Further, about 26% of ATS users and 14% of non-users self-reported driving under the influence of alcohol during the last 12 months. Among stimulant users, drink-driving was independently associated with last month high-volume alcohol consumption (Incident Rate Ratio (IRR): 5.70, 95% CI: 2.24-14.52), depression (IRR: 1.28, 95% CI: 1.07-1.52), low income (IRR: 3.57, 95% CI: 1.12-11.38), and male gender (IRR: 5.40, 95% CI: 2.05-14.21). - Conclusions Amphetamine-type stimulant use is associated with increased long-term risk of drink-driving, due to a number of behavioural and social factors. Inter-sectoral approaches which target long-term behaviours may reduce offending rates.

Effect of an interactive therapeutic robotic animal on engagement, mood states, agitation and psychotropic drug use in people with dementia: A cluster-randomised controlled trial protocol

Introduction: Apathy, agitated behaviours, loneliness and depression are common consequences of dementia. This trial aims to evaluate the effect of a robotic animal on behavioural and psychological symptoms of dementia in people with dementia living in long-term aged care. Methods and analysis: A cluster-randomised controlled trial with three treatment groups: PARO (robotic animal), Plush-Toy (non-robotic PARO) or Usual Care (Control). The nursing home sites are Australian Government approved and accredited facilities of 60 or more beds. The sites are located in South-East Queensland, Australia. A sample of 380 adults with a diagnosis of dementia, aged 60 years or older living in one of the participating facilities will be recruited. The intervention consists of three individual 15 min non-facilitated sessions with PARO or Plush- Toy per week, for a period of 10 weeks. The primary outcomes of interest are improvement in agitation, mood states and engagement. Secondary outcomes include sleep duration, step count, change in psychotropic medication use, change in treatment costs, and staff and family perceptions of PARO or Plush-Toy. Video data will be analysed using Noldus XT Pocket Observer; descriptive statistics will be used for participants’ demographics and outcome measures; cluster and individual level analyses to test all hypotheses and Generalised Linear Models for cluster level and Generalised Estimation Equations and/or Multi-level Modeling for individual level data. Ethics and dissemination: The study participants or their proxy will provide written informed consent. The Griffith University Human Research Ethics Committee has approved the study (NRS/03/14/HREC). The results of the study will provide evidence of the efficacy of a robotic animal as a psychosocial treatment for the behavioural and psychological symptoms of dementia. Findings will be presented at local and international conference meetings and published in peer-reviewed journals.

Formulation and characterization of drug-loaded microparticles using distillers dried grain kafirin

Kafirin, a protein extracted from sorghum grain, has been formulated into microparticles and proposed for use as a delivery system owing to the resistance of kafirin to upper gastrointestinal digestion. However, extracting kafirin from sorghum distillers dried grains with solubles (DDGS) may be more efficient, because the carbohydrate component has been removed by fermentation. This study investigated the properties and use of kafirin extracted from DDGS to formulate microparticles. Prednisolone, an anti-inflammatory drug that could benefit from a delayed and targeted delivery system to the colon, was loaded into DDGS kafirin microparticles by phase separation with sodium chloride. Scanning electron micrographs revealed that the empty and prednisolone-loaded microparticles were round in shape and varied in size. Surface binding studies indicated prednisolone was loaded within the microparticles rather than being solely bound on the surface. These findings demonstrate DDGS kafirin can be formulated into microparticles and loaded with medication. Future studies could investigate the potential applications of DDGS kafirin microparticles as an orally administered targeted drug-delivery system.

Magnetic resonance microimaging of cancer cell spheroid constructs

BACKGROUND Hydrogel-based cell cultures are excellent tools for studying physiological events occurring in the growth and proliferation of cells, including cancer cells. Diffusion magnetic resonance is a physical technique that has been widely used for the characterisation of biological systems as well as hydrogels. In this work, we applied diffusion magnetic resonance imaging (MRI) to hydrogel-based cultures of human ovarian cancer cells. METHODS Diffusion-weighted spin-echo MRI measurements were used to obtain spatially-resolved maps of apparent diffusivities for hydrogel samples with different compositions, cell loads and drug (Taxol) treatment regimes. The samples were then characterised using their diffusivity histograms, mean diffusivities and the respective standard deviations, and pairwise Mann-Whitney tests. The elastic moduli of the samples were determined using mechanical compression testing. RESULTS The mean apparent diffusivity of the hydrogels was sensitive to the polymer content, cell load and Taxol treatment. For a given sample composition, the mean apparent diffusivity and the elastic modulus of the hydrogels exhibited a negative correlation. CONCLUSIONS Diffusivity of hydrogel-based cancer cell culture constructs is sensitive to both cell proliferation and Taxol treatment. This suggests that diffusion-weighted imaging is a promising technique for non-invasive monitoring of cancer cell proliferation in hydrogel-based, cellularly-sparse 3D cell cultures. The negative correlation between mean apparent diffusivity and elastic modulus suggests that the diffusion coefficient is indicative of the average density of the physical microenvironment within the hydrogel construct.

There is 'hope for you yet': The female drug offender in sentencing discourse

Language and gender research has, in recent years, emphasised the importance of examining the context-specific ways in which people ‘do gender’ in different situations. In this paper, we explore how women involved in drug offences, specifically methamphetamine manufacture offences, are constructed within the language of the courts. Thirty-six sentencing transcripts from the New Zealand courts were examined to investigate how such offences, committed by women, are understood. In order to explore the representation of female offenders, a critical discourse analytic approach was adopted. Such an approach recognises that linguistic modes not only create and legitimise power inequalities but also embody a specific worldview. Three gendered discourses were identified in the sentencing texts: (i) the discourse of femininity, reinforcing the socially prescribed female role; (ii) the discourse of aberration, concerning women who breach traditional gender role expectations, and; (iii) the discourse of salvation, presenting aberrant women with an opportunity to become ‘good’ women once again. The findings illustrate the ways in which processes of gendering take place within a specific community of practice: the courtroom.

Age-related changes in hepatic function: An update on implications for drug therapy

The accumulation of deficits with increasing age results in a decline in the functional capacity of multiple organs and systems. These changes can have a significant influence on the pharmacokinetics and pharmacodynamics of prescribed drugs. Although alterations in body composition and worsening renal clearance are important considerations, for most drugs the liver has the greatest effect on metabolism. Age-related change in hepatic function thereby causes much of the variability in older people’s responses to medication. In this review, we propose that a decline in the ability of the liver to inactivate toxins may contribute to a proinflammatory state in which frailty can develop. Since inflammation also downregulates drug metabolism, medication prescribed to frail older people in accordance with disease-specific guidelines may undergo reduced systemic clearance, leading to adverse drug reactions, further functional decline and increasing polypharmacy, exacerbating rather than ameliorating frailty status. We also describe how increasing chronological age and frailty status impact liver size, blood flow and protein binding and enzymes of drug metabolism. This is used to contextualise our discussion of appropriate prescribing practices. For example, while the general axiom of ‘start low, go slow’ should underpin the initiation of medication (titrating to a defined therapeutic goal), it is important to consider whether drug clearance is flow or capacity-limited. By summarising the effect of age-related changes in hepatic function on medications commonly used in older people, we aim to provide a guide that will have high clinical utility for practising geriatricians.

Polymer encapsulation of magnesium to control biodegradability and biocompatibility

Clinical utility of biodegradable magnesium implants is undermined by the untimely degradation of these materials in vivo. Their high corrosion rate leads to loss of mechanical integrity, peri–implant alkalization and localised accumulation of hydrogen gas. Biodegradable coatings were produced on pure magnesium using RF plasma polymerisation. A monoterpene alcohol with known anti-inflammatory and antibacterial properties was used as a polymer precursor. The addition of the polymeric layer was found to reduce the degradation rate of magnesium in simulated body fluid. The in vitro studies indicated good cytocompatibility of non-adherent THP–1 cells and mouse macrophage cells with the polymer, and the polymer coated sample. The viability of THP–1 cells was significantly improved when in contact with polymer encapsulated magnesium compared to unmodified samples. Collectively, these results suggest plasma enhanced polymer encapsulation of magnesium as a suitable method to control degradation kinetics of this biomaterial.

Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology

After more than twenty years of basic and applied research, the use of nanotechnology in the design and manufacture of nanoscale materials is rapidly increasing, particularly in commercial applications that span from electronics across renewable energy areas, and biomedical devices. Novel polymers are attracting significant attention for they promise to provide a low−cost high−performance alternative to existing materials. Furthermore, these polymers have the potential to overcome limitations imposed by currently available materials thus enabling the development of new technologies and applications that are currently beyond our reach. This work focuses on the development of a range of new low−cost environmentally−friendly polymer materials for applications in areas of organic (flexible) electronics, optics, and biomaterials. The choice of the monomer reflects the environmentally−conscious focus of this project. Terpinen−4−ol is a major constituent of Australian grown Melaleuca alternifolia (tea tree) oil, attributed with the oil's antimicrobial and anti−inflammatory properties. Plasma polymerisation was chosen as a deposition technique for it requires minimal use of harmful chemicals and produces no hazardous by−products. Polymer thin films were fabricated under varied process conditions to attain materials with distinct physico−chemical, optoelectrical, biological and degradation characteristics. The resultant materials, named polyterpenol, were extensively characterised using a number of well−accepted and novel techniques, and their fundamental properties were defined. Polyterpenol films were demonstrated to be hydrocarbon rich, with variable content of oxygen moieties, primarily in the form of hydroxyl and carboxyl functionalities. The level of preservation of original monomer functionality was shown to be strongly dependent on the deposition energy, with higher applied power increasing the molecular fragmentation and substrate temperature. Polyterpenol water contact angle contact angle increased from 62.7° for the 10 W samples to 76.3° for the films deposited at 100 W. Polymers were determined to resist solubilisation by water, due to the extensive intermolecular and intramolecular hydrogen bonds present, and other solvents commonly employed in electronics and biomedical processing. Independent of deposition power, the surface topography of the polymers was shown to be smooth (Rq <0.5 nm), uniform and defect free. Hardness of polyterpenol coatings increased from 0.33 GPa for 10 W to 0.51 GPa for 100 W (at 500 μN load). Coatings deposited at higher input RF powers showed less mechanical deformation during nanoscratch testing, with no considerable damage, cracking or delamination observed. Independent of the substrate, the quality of film adhesion improved with RF power, suggesting these coatings are likely to be more stable and less susceptible to wear. Independent of fabrication conditions, polyterpenol thin films were optically transparent, with refractive index approximating that of glass. Refractive index increased slightly with deposition power, from 1.54 (10 W) to 1.56 (100 W) at 500 nm. The optical band gap values declined with increasing power, from 2.95 eV to 2.64 eV, placing the material within the range for semiconductors. Introduction of iodine impurity reduced the band gap of polyterpenol, from 2.8 eV to 1.64 eV, by extending the density of states more into the visible region of the electromagnetic spectrum. Doping decreased the transparency and increased the refractive index from 1.54 to 1.70 (at 500 nm). At optical frequencies, the real part of permittivity (k) was determined to be between 2.34 and 2.65, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies, where permittivity increased with input RF energy – from 2.32 to 2.53 (at 10 GHz ) and from 2.65 to 2.83 (at 20 GHz). At low frequencies, the dielectric constant was determined from current−voltage characteristics of Al−polyterpenol−Al devices. At frequencies below 100 kHz, the dielectric constant varied with RF power, from 3.86 to 4.42 at 1 kHz. For all samples, the resistivity was in order of 10⁸−10⁹ _m (at 6 V), confirming the insulating nature of polyterpenol material. In situ iodine doping was demonstrated to increase the conductivity of polyterpenol, from 5.05 × 10⁻⁸ S/cm to 1.20 × 10⁻⁶ S/cm (at 20 V). Exposed to ambient conditions over extended period of time, polyterpenol thin films were demonstrated to be optically, physically and chemically stable. The bulk of ageing occurred within first 150 h after deposition and was attributed to oxidation and volumetric relaxation. Thermal ageing studies indicated thermal stability increased for the films manufactured at higher RF powers, with degradation onset temperature associated with weight loss shifting from 150 ºC to 205 ºC for 10 W and 100 W polyterpenol, respectively. Annealing the films to 405 °C resulted in full dissociation of the polymer, with minimal residue. Given the outcomes of the fundamental characterisation, a number of potential applications for polyterpenol have been identified. Flexibility, tunable permittivity and loss tangent properties of polyterpenol suggest the material can be used as an insulating layer in plastic electronics. Implementation of polyterpenol as a surface modification of the gate insulator in pentacene-based Field Effect Transistor resulted in significant improvements, shifting the threshold voltage from + 20 V to –3 V, enhancing the effective mobility from 0.012 to 0.021 cm²/Vs, and improving the switching property of the device from 10⁷ to 10⁴. Polyterpenol was demonstrated to have a hole transport electron blocking property, with potential applications in many organic devices, such as organic light emitting diodes. Encapsulation of biomedical devices is also proposed, given that under favourable conditions, the original chemical and biological functionality of terpinen−4−ol molecule can be preserved. Films deposited at low RF power were shown to successfully prevent adhesion and retention of several important human pathogens, including P. aeruginosa, S. aureus, and S. epidermidis, whereas films deposited at higher RF power promoted bacterial cell adhesion and biofilm formation. Preliminary investigations into in vitro biocompatibility of polyterpenol demonstrated the coating to be non−toxic for several types of eukaryotic cells, including Balb/c mice macrophage and human monocyte type (HTP−1 non-adherent) cells. Applied to magnesium substrates, polyterpenol encapsulating layer significantly slowed down in vitro biodegradation of the metal, thus increasing the viability and growth of HTP−1 cells. Recently, applied to varied nanostructured titanium surfaces, polyterpenol thin films successfully reduced attachment, growth, and viability of P. aeruginosa and S. aureus.

The antihypertensive drug pindolol attenuates long-term but not short-term binge-like ethanol consumption in mice

Alcohol dependence is a debilitating disorder with current therapies displaying limited efficacy and/or compliance. Consequently, there is a critical need for improved pharmacotherapeutic strategies to manage alcohol use disorders (AUDs). Previous studies have shown that the development of alcohol dependence involves repeated cycles of binge-like ethanol intake and abstinence. Therefore, we used a model of binge-ethanol consumption (drinking-in-the-dark) in mice to test the effects of compounds known to modify the activity of neurotransmitters implicated in alcohol addiction. From this, we have identified the FDA-approved antihypertensive drug pindolol, as a potential candidate for the management of AUDs. We show that the efficacy of pindolol to reduce ethanol consumption is enhanced following long-term (12-weeks) binge-ethanol intake, compared to short-term (4-weeks) intake. Furthermore, pindolol had no effect on locomotor activity or consumption of the natural reward sucrose. Because pindolol acts as a dual beta-adrenergic antagonist and 5-HT1A/1B partial agonist, we examined its effect on spontaneous synaptic activity in the basolateral amygdala (BLA), a brain region densely innervated by serotonin- and norepinephrine-containing fibres. Pindolol increased spontaneous excitatory post-synaptic current frequency in BLA principal neurons from long-term ethanol consuming mice but not naïve mice. Additionally, this effect was blocked by the 5-HT1A/1B receptor antagonist methiothepin, suggesting that altered serotonergic activity in the BLA may contribute to the efficacy of pindolol to reduce ethanol intake following long-term exposure. Although further mechanistic investigations are required, this study demonstrates the potential of pindolol as a new treatment option for AUDs that can be fast-tracked into human clinical studies.

An economical, adaptable and user-friendly drip-perfusion bioreactor system designed for in vitro three dimensional cell culturing

This research project investigated a bioreactor system capable of high density cell growth intended for use in regenerative medicine and protein production. The bioreactor was based on a drip-perfusion concept and constructed with minimal costs, readily available components, and straightforward processes for usage. This study involved the design, construction, and testing of the bioreactor where the results showed promising three dimensional cell growth within a polymer structure. The accessibility of this equipment and the capability of high density, three dimensional cell growth would be suitable for future research in pharmaceutical drug manufacturing, and human organ and tissue regeneration.

Evaluation of a workplace alcohol and other drug policy

BACKGROUND The current impetus for developing alcohol and/or other drugs (AODs) workplace policies in Australia is to reduce workplace AOD impairment, improve safety, and prevent AOD-related injury in the workplace. For these policies to be effective, they need to be informed by scientific evidence. Evidence to inform the development and implementation of effective workplace AOD policies is currently lacking. There does not currently appear to be conclusive evidence for the effectiveness of workplace AOD policies in reducing impairment and preventing AOD-related injury. There is also no apparent evidence regarding which factors facilitate or impede the success of an AOD policy, or whether, for example, unsuccessful policy outcomes were due to poor policy or merely poor implementation of the policy. It was the aim of this research to undertake a process, impact, and outcome evaluation of a workplace AOD policy, and to contribute to the body of knowledge on the development and implementation of effective workplace AOD policies. METHODS The research setting was a state-based power-generating industry in Australia between May 2008 and May 2010. Participants for the process evaluation study were individuals who were integral to either the development or the implementation of the workplace AOD policy, or both of these processes (key informants), and comprised the majority of individuals who were involved in the process of developing and/or implementing the workplace AOD policy. The sample represented the two main groups of interest—management and union delegates/employee representatives—from all three of the participating organisations. For the impact and outcome evaluation studies, the population included all employees from the three participating organisations, and participants were all employees who consented to participate in the study and who completed both the pre-and post-policy implementation questionnaires. Qualitative methods in the form of interviews with key stakeholders were used to evaluate the process of developing and implementing the workplace AOD policy. In order to evaluate the impact of the policy with regard to the risk factors for workplace AOD impairment, and the outcome of the policy in terms of reducing workplace AOD impairment, quantitative methods in the form of a non-randomised single group pre- and post-test design were used. Changes from Time 1 (pre) to Time 2 (post) in the risk factors for workplace AOD impairment, and changes in the behaviour of interest—(self-reported) workplace AOD impairment—were measured. An integration of the findings from the process, impact, and outcome evaluation studies was undertaken using a combination of qualitative and quantitative methods. RESULTS For the process evaluation study Study respondents indicated that their policy was developed in the context of comparable industries across Australia developing workplace AOD policies, and that this was mainly out of concern for the deleterious health and safety impacts of workplace AOD impairment. Results from the process evaluation study also indicated that in developing and implementing the workplace AOD policy, there were mainly ‗winners', in terms of health and safety in the workplace. While there were some components of the development and implementation of the policy that were better done than others, and the process was expensive and took a long time, there were, overall, few unanticipated consequences to implementing the policy and it was reported to be thorough and of a high standard. Findings also indicated that overall the policy was developed and implemented according to best-practice in that: consultation during the policy development phase (with all the main stakeholders) was extensive; the policy was comprehensive; there was universal application of the policy to all employees; changes in the workplace (with regard to the policy) were gradual; and, the policy was publicised appropriately. Furthermore, study participants' responses indicated that the role of an independent external expert, who was trusted by all stakeholders, was integral to the success of the policy. For the impact and outcome evaluation studies Notwithstanding the limitations of pre- and post-test study designs with regard to attributing cause to the intervention, the findings from the impact evaluation study indicated that following policy implementation, statistically significant positive changes with regard to workplace AOD impairment were recorded for the following variables (risk factors for workplace AOD impairment): Knowledge; Attitudes; Perceived Behavioural Control; Perceptions of the Certainty of being punished for coming to work impaired by AODs; Perceptions of the Swiftness of punishment for coming to work impaired by AODs; and Direct and Indirect Experience with Punishment Avoidance for workplace AOD impairment. There were, however, no statistically significant positive changes following policy implementation for Behavioural Intentions, Subjective Norms, and Perceptions of the Severity of punishment for workplace AOD impairment. With regard to the outcome evaluation, there was a statistically significant reduction in self-reported workplace AOD impairment following the implementation of the policy. As with the impact evaluation, these findings need to be interpreted in light of the limitations of the study design in being able to attribute cause to the intervention alone. The findings from the outcome evaluation study also showed that while a positive change in self-reported workplace AOD impairment following implementation of the policy did not appear to be related to gender, age group, or employment type, it did appear to be related to levels of employee general alcohol use, cannabis use, site type, and employment role. Integration of the process, impact, and outcome evaluation studies There appeared to be qualitative support for the relationship between the process of developing and implementing the policy, and the impact of the policy in changing the risk factors for workplace AOD impairment. That is, overall the workplace AOD policy was developed and implemented well and, following its implementation, there were positive changes in the majority of measured risk factors for workplace AOD impairment. Quantitative findings lend further support for a relationship between the process and impact of the policy, in that there was a statistically significant association between employee perceived fidelity of the policy (related to the process of the policy) and positive changes in some risk factors for workplace AOD impairment (representing the impact of the policy). Findings also indicated support for the relationship between the impact of the policy in changing the risk factors for workplace AOD impairment and the outcome of the policy in reducing workplace AOD impairment: positive changes in the risk factors for workplace AOD impairment (impact) were related to positive changes in self reported workplace AOD impairment (representing the main goal and outcome of the policy). CONCLUSIONS The findings from the research indicate support for the conclusion that the policy was appropriately implemented and that it achieved its objectives and main goal. The Doctoral research findings also addressed a number of gaps in the literature on workplace AOD impairment, namely: the likely effectiveness of AOD policies for reducing AOD impairment in the workplace, which factors in the development and implementation of a workplace AOD policy are likely to facilitate or impede the effectiveness of the policy to reduce workplace AOD impairment, and which employee groups are less likely to respond well to policies of this type. The findings from this research not only represent an example of translational, applied research—through the evaluation of the study industry's policy—but also add to the body of knowledge on workplace AOD policies and provide policy-makers with evidence which may be useful in the development and implementation of effective workplace AOD policies. Importantly, the findings espouse the importance of scientific evidence in the development, implementation, and evaluation of workplace AOD policies.

Drug discovery approaches utilizing three-dimensional cell culture

Historically, two-dimensional (2D) cell culture has been the preferred method of producing disease models in vitro. Recently, there has been a move away from 2D culture in favor of generating three-dimensional (3D) multicellular structures, which are thought to be more representative of the in vivo environment. This transition has brought with it an influx of technologies capable of producing these structures in various ways. However, it is becoming evident that many of these technologies do not perform well in automated in vitro drug discovery units. We believe that this is a result of their incompatibility with high-throughput screening (HTS). In this study, we review a number of technologies, which are currently available for producing in vitro 3D disease models. We assess their amenability with high-content screening and HTS and highlight our own work in attempting to address many of the practical problems that are hampering the successful deployment of 3D cell systems in mainstream research.

Plasma polymer and biomolecule modification of 3-D scaffolds for tissue engineering

Plasma polymerization was used to coat a melt electrospun polycaprolactone scaffold to improve cell attachment and organization. Plasma polymerization was performed using an amine containing monomer, allylamine, which then allowed for the subsequent immobilization of biomolecules i.e. heparin and fibroblast growth factor-2. The stability of the plasma polymerized amine-coating was demonstrated by X-ray photoelectron spectroscopy analysis and imaging time-of-flight secondary ion mass spectrometry revealed that a uniform plasma amine-coating was deposited throughout the scaffold. Based upon comparison with controls it was evident that the combination scaffold aided cell ingress and the formation of distinct fibroblast and keratinocyte layers.