Links between unlicensed and unregistered driving: Literature review. Report to Queensland Department of Transport and Main Roads

Vehicle registration represents an important component of the management of the road transport system in Queensland, with most vehicles required to be registered before they can be driven or parked on a public road (Department of Transport and Main Roads, 2010b). In addition to the collection of taxes for road construction and maintenance, the current registration system also: • Sets the safety standards required for vehicles to be allowed on public roads; • Allows driver behaviour to be managed by identifying vehicles, and the responsible owners of vehicles, for enforcement purposes; and • Facilitates the collection of insurance premiums for the Queensland Compulsory Third Party (CTP) insurance scheme.

A comparison of methods to estimate the extent of unlicensed driving: Literature review. Final report to Queensland Transport

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. The term ‘unlicensed driver' is generally used to refer to people who operate a motor vehicle or motorcycle without a valid driver's licence, including those who: • have let their licence expire; • have been disqualified or suspended from driving; • hold an inappropriate class of licence for the vehicle they drive; • drive outside the restrictions of a special licence; • don’t currently hold a licence; or • have never held a licence.

Final report : Estimating the extent of unlicensed driving: Roadside licence check survey - Wave2. Report to Queensland Department of Transport and Main Roads

This report documents a second, revised roadside licence check survey undertaken by the Queensland Police Service (QPS) in conjunction with roadside random breath testing (RBT) traffic operations. The methodology utilised was devised by the Centre for Accident Research and Road Safety – Queensland (CARRS-Q), Transport and Main Roads (TMR) and QPS, after consideration of a number of options.

An examination of the factors contributing to unlicensed driving. Report to Queensland Department of Transport and Main Roads

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. Unlike alcohol impairment and speeding, unlicensed driving does not play a direct causative role in road crashes. However it represents a major problem for road safety in two respects. Firstly, it undermines the effectiveness of driver licensing systems by preventing the allocation of demerit points and reducing the impact of licence loss (Watson, 2004b). Secondly, there is a growing body of evidence linking unlicensed driving to a cluster of high-risk behaviours including drink driving, speeding, failure to wear seat belts and motorcycle use (Griffin & DeLaZerda, 2000; Harrison, 1997; Watson, 1997, 2004b). Consistent with this, utilising the quasi-induced exposure method, Watson (2004a) estimated that in Queensland, unlicensed drivers were almost three times more likely to be involved in a reported crash than licensed drivers.

Profiling unlicensed drivers and riders in Queensland. Report to Queensland Department of Transport and Main Roads

Unlicensed driving remains a serious problem for road safety, despite ongoing improvements in traffic law enforcement practices and technology. This report examines de-identified traffic infringement and sanction histories for drivers in Queensland who had lost their licence between 1st January 2003 and 31st December 2008. A total of 546,117 Queensland drivers were identified. Key areas discussed include the prevalence of unlicensed driving and the extent to which particular offences were detected amongst drivers with a licence sanction or disqualified licence.

Crash involvement patterns of unlicensed drivers: Literature review. Report to Queensland Department of Transport and Main Roads

There is a lack of definitive evidence available relating to the extent and nature of unlicensed driving. Analysis of the crash involvement of unlicensed drivers provides an opportunity to better understand the behaviours of this group. This paper reviews the available literature relating to crash involvement patterns of unlicensed drivers. Key areas discussed include the prevalence of unlicensed driving as indicated by studies of crashes involving this group and associations between unlicensed driving and higher levels of risk-taking on the road. This paper also notes differences found in the characteristics and on-road behaviour of unlicensed drivers and the degree to which these factors, in particular alcohol and drug misuse, may influence crash involvement patterns. Drawing on Australian and international studies, this paper consolidates the available research evidence and identifies gaps in current knowledge relating to crash involvement patterns of unlicensed drivers.

Unlicensed and unregistered vehicle project: Summary report. Report to Queensland Department of Transport and Main Roads

Unlicensed driving remains a serious problem for road safety, despite ongoing improvements in traffic law enforcement practices and technology. While it does not play a direct causative role in road crashes, unlicensed driving undermines the integrity of the driver licensing system and is associated with a range of high-risk behaviours. The Queensland Transport and Main Roads (TMR) commissioned a program of research with separate components relating to different aspects of unlicensed driving. Drawing on Australian and international studies, the Unlicensed and Unregistered Vehicle (UUV) project explores the nature of unlicensed driving in Queensland, consolidates the available research evidence and identifies gaps in current knowledge relating to the driving behaviours of unlicensed drivers.

Links between unlicensed and unregistered driving (Data analysis). Report to Queensland Department of Transport and Main Roads

There is a current lack of understanding regarding the use of unregistered vehicles on public roads and road-related areas, and the links between the driving of unregistered vehicles and a range of dangerous driving behaviours. This report documents the findings of data analysis conducted to investigate the links between unlicensed driving and the driving of unregistered vehicles, and is an important initial undertaking into understanding these behaviours. This report examines de-identified data from two sources: crash data; and offence data. The data was extracted from the Queensland Department of Transport and Main Roads (TMR) databases and covered the period from 2003 to 2008.

Driver’s behavioural changes with new Intelligent Transport System interventions at railway level crossings: A driving simulator study

Improving safety at railway level crossings is an important issue for the Australian transport system. Governments, the rail industry and road organisations have tried a variety of countermeasures for many years to improve railway level crossing safety. New types of Intelligent Transport System (ITS) interventions are now emerging due to the availability and the affordability of technology. These interventions target both actively and passively protected railway level crossings and attempt to address drivers’ errors at railway crossings, which are mainly a failure to detect the crossing or the train and misjudgement of the train approach speed and distance. This study aims to assess the effectiveness of three emerging ITS that the rail industry considers implementing in Australia: a visual in-vehicle ITS, an audio in-vehicle ITS, as well as an on-road flashing beacons intervention. The evaluation was conducted on an advanced driving simulator with 20 participants per trialled technology, each participant driving once without any technology and once with one of the ITS interventions. Every participant drove through a range of active and passive crossings with and without trains approaching. Their speed approach of the crossing, head movements and stopping compliance were measured. Results showed that driver behaviour was changed with the three ITS interventions at passive crossings, while limited effects were found at active crossings, even with reduced visibility. The on-road intervention trialled was unsuccessful in improving driver behaviour; the audio and visual ITS improved driver behaviour when a train was approaching. A trend toward worsening driver behaviour with the visual ITS was observed when no trains were approaching. This trend was not observed for the audio ITS intervention, which appears to be the ITS intervention with the highest potential for improving safety at passive crossings.

Evaluation of a meteorological and three-dimensional chemical transport model for gaseous and particle concentrations in an urban airshed

The Air Pollution Model and Chemical Transport Model (TAPM-CTM) framework has been tested and applied originally in Sydney to quantify particle and gaseous concentration (Cope et al, 2014). However, the model performance had not been tested in the south-eastern Queensland region (SEQR), Australia.

Managing knowledge to promote sustainability in Australian transport infrastructure projects

To deliver tangible sustainability outcomes, the infrastructure sector of the construction industry needs to build capacities for the creation, application and management of ever increasing knowledge. This paper intends to establish the importance and key issues of promoting sustainability through knowledge management (KM). It presents a new conceptual framework for managing sustainability knowledge to raise the awareness and direct future research in the field of transport infrastructure, one of the fast growing sectors in Australia. A holistic KM approach is adopted in this research to consider the potential to “deliver the right information to the right person at the right time” in the context of sustainable development of infrastructure. A questionnaire survey among practitioners across the nation confirmed the necessity and identified priority issues of managing knowledge for sustainability. During infrastructure development, KM can help build much needed industry consensus, develop capacity, communicate decisions, and promote specific measures for the pursuit of sustainability. Six essential elements of the KM approach and their priority issues informed the establishment of a conceptual KM framework. The transport infrastructure sector has come to realise that development must not come at the expense of environmental and social objectives. In practice however, it is facing extensive challenges to deliver what has been promised in the sustainability agenda. This research demonstrates the importance of managing sustainability knowledge, integration of various stakeholders, facilitation of plans and actions and delivery of tangible benefits in real projects, as a positive step towards meeting these challenges.

A workplace-based Participatory Action Research project to investigate the effectiveness of nutrition and physical activity interventions for truck drivers in six Queensland transport industry workplaces: 2012-2015

The Queensland Transport Industry Workplace Health Intervention project was a Participatory Action Research (PAR) project to investigate the effectiveness of workplace-based nutrition and physical activity health promotion interventions for truck drivers in transport industry workplaces in south-east Queensland. The project was conducted by a research team at the Queensland University of Technology (QUT), and was funded by the Queensland Government under the Healthier.Happier.Workplaces initiative.

Effect of covalent functionalisation on thermal transport across graphene-polymer interfaces

This paper is concerned with the interfacial thermal resistance for polymer composites reinforced by various covalently functionalised graphene. By using molecular dynamics simulations, the obtained results show that the covalent functionalisation in graphene plays a significant role in reducing the graphene-paraffin interfacial thermal resistance. This reduction is dependent on the coverage and type of functional groups. Among the various functional groups, butyl is found to be the most effective in reducing the interfacial thermal resistance, followed by methyl, phenyl and formyl. The other functional groups under consideration such as carboxyl, hydroxyl and amines are found to produce negligible reduction in the interfacial thermal resistance. For multilayer graphene with a layer number up to four, the interfacial thermal resistance is insensitive to the layer number. The effects of the different functional groups and the layer number on the interfacial thermal resistance are also elaborated using the vibrational density of states of the graphene and the paraffin matrix. The present findings provide useful guidelines in the application of functionalised graphene for practical thermal management.

Scenario planning and emerging global trends for the future of roads and automobile transport

Roads and road infrastructure will be faced with multiple challenges over the coming decades – challenges that in many ways bear little resemblance to those previously faced - and as such will require new approaches. The opportunity exists to transform the way road infrastructure is conceived and constructed, as a key part of the process of assisting society to respond to climate change and reduce other environmental pressures. Innovations in road construction, use and management in order to manage these changes can now be seen. Scenario planning is one tool that can take into account emerging challenges, develop or adopt new approaches, and thus help this transformation to occur. The paper explores scenario planning methodologies, global innovations and trends in road construction and maintenance and the findings from stakeholder workshops in Brisbane and Perth. It highlights key opportunities for road agencies to use scenarios to enable planning that, in the face of future uncertainties, facilitates appropriate responses.

Multifunctional SA-PProDOT binder for lithium ion batteries

An environmentally benign, highly conductive, and mechanically strong binder system can overcome the dilemma of low conductivity and insufficient mechanical stability of the electrodes to achieve high performance lithium ion batteries (LIBs) at a low cost and in a sustainable way. In this work, the naturally occurring binder sodium alginate (SA) is functionalized with 3,4-propylenedioxythiophene-2,5-dicarboxylic acid (ProDOT) via a one-step esterification reaction in a cyclohexane/dodecyl benzenesulfonic acid (DBSA)/water microemulsion system, resulting in a multifunctional polymer binder, that is, SA-PProDOT. With the synergetic effects of the functional groups (e.g., carboxyl, hydroxyl, and ester groups), the resultant SA-PProDOT polymer not only maintains the outstanding binding capabilities of sodium alginate but also enhances the mechanical integrity and lithium ion diffusion coefficient in the LiFePO4 (LFP) electrode during the operation of the batteries. Because of the conjugated network of the PProDOT and the lithium doping under the battery environment, the SA-PProDOT becomes conductive and matches the conductivity needed for LiFePO4 LIBs. Without the need of conductive additives such as carbon black, the resultant batteries have achieved the theoretical specific capacity of LiFePO4 cathode (ca. 170 mAh/g) at C/10 and ca. 120 mAh/g at 1C for more than 400 cycles.