Configurable multi-perspective business process models

A configurable process model provides a consolidated view of a family of business processes. It promotes the reuse of proven practices by providing analysts with a generic modelling artifact from which to derive individual process models. Unfortunately, the scope of existing notations for configurable process modelling is restricted, thus hindering their applicability. Specifically, these notations focus on capturing tasks and control-flow dependencies, neglecting equally important ingredients of business processes such as data and resources. This research fills this gap by proposing a configurable process modelling notation incorporating features for capturing resources, data and physical objects involved in the performance of tasks. The proposal has been implemented in a toolset that assists analysts during the configuration phase and guarantees the correctness of the resulting process models. The approach has been validated by means of a case study from the film industry.

Student autonomy enhancing science learning : Observations from a Primary Connections implementation

This case study involved a detailed analysis of the changes in beliefs and teaching practices of teachers who adopted the Primary Connections program as a professional development initiative. When implementing an inquiry-based learning model, teachers observed that their students learnt more when they intervened less. By scaffolding open-ended nquiries they achieved more diverse, complex and thorough learning outcomes than previously achieved with teacher-led discussions or demonstrations. Initially, student autonomy presented erceived threats to teachers, including possible selection of topics outside the teachers’ science knowledge. In practice, when such issues arose, resolving them became a stimulating part of the earning for both teachers and students. The teachers’ observation of enhanced student learning became a powerful motivator for change in their beliefs and practices. Implications for developers of PD programs are (1) the importance of modeling student-devised inquiries, and (2) recognising the role of successful classroom implementation in facilitating change.

Thin film solar cells based on CU2ZnSnS4 absorber

Cu2ZnSnS4 (CZTS) is considered to be one of the most promising light absorbing materials for low cost, high efficiency thin film solar cells. Compared to conventional CuIn(S, Se)2 (CIS) and Cu(InGa)(S,Se)2 (CIGS) as well as CdTe light absorber, CZTS is only composed of earth-abundant non-toxic elements, ensuring the price competitiveness of this kind of solar cell in the future PV market. However, the research in this area is very limited compared to CIS and CIGS. Detailed studies of both the material and the device are rare, which significantly restricts the development in this area. This paper reviews the progress in the research field of CZTS, particularly the methods which were employed to prepare CZTS absorber material.

School-based experiences : developing primary science preservice teachers' practice

Reviews into teacher education emphasise the need for preservice teachers to have more school-based experiences. In this study, a school-based experience was organised within a nine-week science curriculum university unit that allowed preservice teachers’ repeated experiences in teaching primary science. This research uses a survey, questionnaire with extended written responses, and researcher observations to investigate preservice teachers’ (n=38) learning experiences in two school settings. Survey results indicated that the majority of these preservice teachers either agreed or strongly agreed that school-based experiences developed their: personal-professional skill development (100%); system requirements (range: 81-100%); teaching practices (81-100%); student behaviour management (range: 94-100%); providing student feedback (89-94%); and reflection on practice (92-100%). Qualitative data provided insights into their development particularly for science content knowledge and receiving positive reinforcement on effective teaching behaviours. According to these preservice teachers, the school-based experiences facilitated “teachable moments – having the knowledge or skills to run with students’ questions or ideas” and allowed preservice teachers to “critically reflect between groups to make the task flow better”. Embedding school-based experiences needs to be part of each and every preservice teacher education unit so preservice teachers can develop confidence, knowledge and skills within authentic school contexts.

Influence of hydrocarbon contamination on clay soil microstructure

Microstructural (fabric, forces and composition) changes due to hydrocarbon contamination in a clay soil were studied using Scanning Electron Microscope (micro-fabric analysis), Atomic Force Microscope (forces measurement) and sedimentation bench test (particle size measurements). The non-polluted and polluted glacial till from north-eastern Poland (area of a fuel terminal) were used for the study. Electrostatic repelling forces for the polluted sample were much lower than for the non-polluted sample. In comparison to non-polluted sample, the polluted sample exhibited lower electric charge, attractive forces on approach and strong adhesion on retrieve. The results of the sedimentation tests indicate that clay particles form larger aggregates and settle out of the suspension rapidly in diesel oil. In non-polluted soil, the fabric is strongly aggregated – densely packed, dominate the face-to-face and edge-to-edge types of contacts, clay film tightly adheres to the surface of larger grains and interparticle pores are more common. In polluted soil, the clay matrix is less aggregated – loosely packed, dominate the edge-to-face types of contacts and inter-micro-aggregate pores are more frequent. Substantial differences were observed in the morphometric and geometrical parameters of pore space. The polluted soil micro-fabric proved to be more isotropic and less oriented than in non-polluted soil. The polluted soil, in which electrostatic forces were suppressed by hydrocarbon interaction, displays more open porosity and larger voids than non-polluted soil, which is characterized by occurrence of the strong electrostatic interaction between clay particles.

Mesoporous bioglass/silk composite scaffolds for bone tissue engineering

In the past 20 years, mesoporous materials have been attracted great attention due to their significant feature of large surface area, ordered mesoporous structure, tunable pore size and volume, and well-defined surface property. They have many potential applications, such as catalysis, adsorption/separation, biomedicine, etc. [1]. Recently, the studies of the applications of mesoporous materials have been expanded into the field of biomaterials science. A new class of bioactive glass, referred to as mesoporous bioactive glass (MBG), was first developed in 2004. This material has a highly ordered mesopore channel structure with a pore size ranging from 5–20 nm [1]. Compared to non-mesopore bioactive glass (BG), MBG possesses a more optimal surface area, pore volume and improved in vitro apatite mineralization in simulated body fluids [1,2]. Vallet-Regí et al. has systematically investigated the in vitro apatite formation of different types of mesoporous materials, and they demonstrated that an apatite-like layer can be formed on the surfaces of Mobil Composition of Matters (MCM)-48, hexagonal mesoporous silica (SBA-15), phosphorous-doped MCM-41, bioglass-containing MCM-41 and ordered mesoporous MBG, allowing their use in biomedical engineering for tissue regeneration [2-4]. Chang et al. has found that MBG particles can be used for a bioactive drug-delivery system [5,6]. Our study has shown that MBG powders, when incorporated into a poly (lactide-co-glycolide) (PLGA) film, significantly enhance the apatite-mineralization ability and cell response of PLGA films. compared to BG [7]. These studies suggest that MBG is a very promising bioactive material with respect to bone regeneration. It is known that for bone defect repair, tissue engineering represents an optional method by creating three-dimensional (3D) porous scaffolds which will have more advantages than powders or granules as 3D scaffolds will provide an interconnected macroporous network to allow cell migration, nutrient delivery, bone ingrowth, and eventually vascularization [8]. For this reason, we try to apply MBG for bone tissue engineering by developing MBG scaffolds. However, one of the main disadvantages of MBG scaffolds is their low mechanical strength and high brittleness; the other issue is that they have very quick degradation, which leads to an unstable surface for bone cell growth limiting their applications. Silk fibroin, as a new family of native biomaterials, has been widely studied for bone and cartilage repair applications in the form of pure silk or its composite scaffolds [9-14]. Compared to traditional synthetic polymer materials, such as PLGA and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), the chief advantage of silk fibroin is its water-soluble nature, which eliminates the need for organic solvents, that tend to be highly cytotoxic in the process of scaffold preparation [15]. Other advantages of silk scaffolds are their excellent mechanical properties, controllable biodegradability and cytocompatibility [15-17]. However, for the purposes of bone tissue engineering, the osteoconductivity of pure silk scaffolds is suboptimal. It is expected that combining MBG with silk to produce MBG/silk composite scaffolds would greatly improve their physiochemical and osteogenic properties for bone tissue engineering application. Therefore, in this chapter, we will introduce the research development of MBG/silk scaffolds for bone tissue engineering.

Formation of one-dimensional capped ZnO nanoparticle assemblies at the air/water interface

The self-assembling behavior and microscopic structure of zinc oxide nanoparticle Langmuir-Blodgett monolayer films were investigated for the case of zinc oxide nanoparticles coated with a hydrophobic layer of dodecanethiol. Evolution of nanoparticle film structure as a function of surface pressure (π) at the air-water interface was monitored in situ using Brewster’s angle microscopy, where it was determined that π=16 mN/m produced near-defect-free monolayer films. Transmission electron micrographs of drop-cast and Langmuir-Schaefer deposited films of the dodecanethiol-coated zinc oxide nanoparticles revealed that the nanoparticle preparation method yielded a microscopic structure that consisted of one-dimensional rodlike assemblies of nanoparticles with typical dimensions of 25 x 400 nm, encased in the organic dodecanethiol layer. These nanoparticle-containing rodlike micelles were aligned into ordered arrangements of parallel rods using the Langmuir-Blodgett technique.

Generalising across borders : policy and the limits of educational science.

AERA Distinguished Lecture, Annual Meetings of the American Educational Research Association, New Orleans, 8 April 2011. How well does educational policy, innovation and science cross borders? What are the parameters of a generalisable cultural science of education? What constitutes a principled policy 'borrowing'?

Loculus : an ontology-based information management framework for the motion picture industry

"How do you film a punch?" This question can be posed by actors, make-up artists, directors and cameramen. Though they can all ask the same question, they are not all seeking the same answer. Within a given domain, based on the roles they play, agents of the domain have different perspectives and they want the answers to their question from their perspective. In this example, an actor wants to know how to act when filming a scene involving a punch. A make-up artist is interested in how to do the make-up of the actor to show bruises that may result from the punch. Likewise, a director wants to know how to direct such a scene and a cameraman is seeking guidance on how best to film such a scene. This role-based difference in perspective is the underpinning of the Loculus framework for information management for the Motion Picture Industry. The Loculus framework exploits the perspective of agent for information extraction and classification within a given domain. The framework uses the positioning of the agent’s role within the domain ontology and its relatedness to other concepts in the ontology to determine the perspective of the agent. Domain ontology had to be developed for the motion picture industry as the domain lacked one. A rule-based relatedness score was developed to calculate the relative relatedness of concepts with the ontology, which were then used in the Loculus system for information exploitation and classification. The evaluation undertaken to date have yielded promising results and have indicated that exploiting perspective can lead to novel methods of information extraction and classifications.

Commissioning of a Geant4 based treatment plan simulation tool : linac model and dicom-rt interface

A Geant4 based simulation tool has been developed to perform Monte Carlo modelling of a 6 MV VarianTM iX clinac. The computer aided design interface of Geant4 was used to accurately model the LINAC components, including the Millenium multi-leaf collimators (MLCs). The simulation tool was verified via simulation of standard commissioning dosimetry data acquired with an ionisation chamber in a water phantom. Verification of the MLC model was achieved by simulation of leaf leakage measurements performed using GafchromicTM film in a solid water phantom. An absolute dose calibration capability was added by including a virtual monitor chamber into the simulation. Furthermore, a DICOM-RT interface was integrated with the application to allow the simulation of treatment plans in radiotherapy. The ability of the simulation tool to accurately model leaf movements and doses at each control point was verified by simulation of a widely used intensity-modulated radiation therapy (IMRT) quality assurance (QA) technique, the chair test.

Portrayal of librarians in Australian creative writing

An exploration is made of the ways in which librarians have been depicted in Australian creative writing. Reference is made to characters in novels, short stories, drama and poetry. With respect to novels, there is some consideration of characterisation and its relationship to plot.

Reproducing successful rituals in bad times : exploring interactions of a new science teacher

Teaching is emotional work. This is especially the case in the first years of teaching when new teachers are particularly vulnerable. By understanding changes in teacher emotions in the early years of teaching we hope to identify strategies that might ultimately reduce teacher attrition. As part of a larger study of the transition of new teachers to the profession, this ethnographic case study explores how a new science teacher produced and reproduced positive emotional interaction rituals with her students in her first year of teaching. We show how dialogical interactions were positive and satisfying experiences for the teacher, and how they were reproduced successfully in different contexts. We also illustrate how both teacher and students used humor to create a structure for dialogical interactions. During these successful interactions the students used shared resources to satisfy their teacher that they were engaging in the relevant science content. The implications of what we have learned for the professional development of new teachers are discussed in relation to an expanded understanding of teacher emotions.

A study of laughter in science lessons

Laughter is a fundamental human phenomenon. Yet there is little educational research on the potential functions of laughter on the enacted (lived) curriculum. In this study, we identify the functions of laughter in a beginning science teacher’s classroom throughout her first year of teaching. Our study shows that laughter is more than a gratuitous phenomenon. It is the result of a collective interactive achievement of the classroom participants that offsets the seriousness of science as a discipline. Laughter, whereas it challenges the seriousness of science, also includes the dialectical inversion of the challenge: it simultaneously reinforces the idea of science as serious business.

(Anti)Queer : introduction

The ‘anti- of ‘(Anti)Queer’ is a queer anti. In particle physics, a domain of science which was for a long time peddled as ultimately knowable, rational and objective, the postmodern turn has made everything queer (or chaotic, as the scientific version of this turn is perhaps more commonly named). This is a world where not only do two wrongs not make a right, but a negative and positive do not calmly cancel each other out to leave nothing, as mathematics might suggest. When matter meets with anti-matter, the resulting explosion can produce not only energy - heat and light? - but new matter. We live in a world whose very basics are no longer the electron and the positron, but an ever proliferating number of chaotic, unpredictable - queer? - subatomic particles. Some are ‘charmed’, others merely ‘strange’ . Weird science indeed. The ‘Anti-’ of ‘Anti-queer’ does not place itself neatly into binaries. This is not a refutation of all that queer has been or will be. It is explicitly a confrontation, a challenge, an attempt to take seriously not only the claims made for queer but the potent contradictions and silences which stand proudly when any attempt is made to write a history of the term. Specifically, ‘Anti-Queer’ is not Beyond Queer, the title of Bruce Bawer’s 1996 book which calmly and self-confidently explains the failings of queer, extols a return to a liberal political theory of cultural change and places its own marker on queer as a movement whose purpose has been served. We are not Beyond Queer. And if we are Anti-Queer, it is only to challenge those working in the arena to acknowledge and work with some of the facts of the movement’s history whose productivity has been erased with a gesture which has, proved, bizarrely, to be reductive and homogenising.

Contemporary children's literature and film : engaging with theory

Bringing together the voices of leading and emerging scholars, this book provides critical approaches for reading children's literature and film. It argues for the significance of theory for reading texts written and produced for young people and integrates a wide range of critical perspectives, including schema theory, theories of space and place, cultural globalization, feminism, ecocriticism, adaptation theory, postcolonialism, and posthumanism.