Design and implementation of wideband baluns for Archimedean spiral antennas

The demand for high-speed data services for portable device has become a driving force for development of advanced broadband access technologies. Despite recent advances in broadband wireless technologies, there remain a number of critical issues to be resolved. One of the major concerns is the implementation of compact antennas that can operate in a wide frequency band. Spiral antenna has been used extensively for broadband applications due to its planar structure, wide bandwidth characteristics and circular polarisation. However, the practical implementation of spiral antennas is challenged by its high input characteristic impedance, relatively low gain and the need for balanced feeding structures. Further development of wideband balanced feeding structures for spiral antennas with matching impedance capabilities remain a need. This thesis proposes three wideband feeding systems for spiral antennas which are compatible with wideband array antenna geometries. First, a novel tapered geometry is proposed for a symmetric coplanar waveguide (CPW) to coplanar strip line (CPS) wideband balun. This balun can achieve the unbalanced to balanced transformation while matching the high input impedance of the antenna to a reference impedance of 50 . The discontinuity between CPW and CPS is accommodated by using a radial stub and bond wires. The bandwidth of the balun is improved by appropriately tapering the CPW line instead of using a stepped impedance transformer. Next, the tapered design is applied to an asymmetric CPW to propose a novel asymmetric CPW to CPS wideband balun. The use of asymmetric CPW does away with the discontinuities between CPW and CPS without having to use a radial stub or bond wires. Finally, a tapered microstrip line to parallel striplines balun is proposed. The balun consists of two sections. One section is the parallel striplines which are connected to the antenna, with the impedance of balanced line equal to the antenna input impedance. The other section consists of a microstrip line where the width of the ground plane is gradually reduced to eventually resemble a parallel stripline. The taper accomplishes the mode and impedance transformation. This balun has significantly improved bandwidth characteristics. Characteristics of proposed feeding structures are measured in a back-to-back configuration and compared to simulated results. The simulated and measured results show the tapered microstrip to parallel striplines balun to have more than three octaves of bandwidth. The tapered microstrip line to parallel striplines balun is integrated with a single Archimedean spiral antenna and with an array of spiral antennas. The performance of the integrated structures is simulated with the aid of electromagnetic simulation software, and results are compared to measurements. The back-to-back microstrip to parallel strip balun has a return loss of better than 10 dB over a wide bandwidth from 1.75 to 15 GHz. The performance of the microstrip to parallel strip balun was validated with the spiral antennas. The results show the balun to be an effective mean of feeding network with a low profile and wide bandwidth (2.5 to 15 GHz) for balanced spiral antennas.

The story of the sixties...a pile-up on the freeway of advanced art

When does 1960s art begin and end? Certainly, aside from a few affinities, the decade’s artistic output does not exactly correspond to its popular conception as the ‘Swinging Sixties’. While it was rare that psychedelic art was truly challenging, the decade saw a number of perceptions change regarding the aims, boundaries and possibilities of experiencing art. Thus, this era has come to represent a watershed or crisis in modernist art. While in the Australian context many of these nascent trends were properly realised in the 1970s – with the full force and impact of post-object art – other challenges were first articulated in the 1950s. So, like any other demarcation of a decade, its limits and boundaries are porous.

The impact of the GST on the community services sector in Queensland

The impact of the GST has on nonprofit organisations has been largely ignored in the compliance cost literature. Most studies to date, both in Australia and overseas, have focused exclusively on measuring the nature and extent of GST compliance costs of businesses in the for-profit sector (particularly the impact on small businesses). This paper examines the impact of The New Tax System, and in particular, the GST on Queensland community sector organisations. The results are extracted from a QCOSS report entitled “Taxing Goodwill: The Impact of GST on Community Services” released in October 2001.

Productivity, technical and efficiency change in Singapore’s services sector, 2005 to 2008

The current study was motivated by statements made by the Economic Strategies Committee that Singapore’s recent productivity levels in services were well below countries such as the US, Japan and Hong Kong. Massive employment of foreign workers was cited as the reason for poor productivity levels. To shed more light on Singapore’s falling productivity, a nonparametric Malmquist productivity index was employed which provides measures of productivity change, technical change and efficiency change. The findings reveal that growth in Total Factor Productivity (TFP) was attributed to technical change with no improvement in efficiency change. Such results suggest that gains from TFP were input-driven rather than from a ‘best-practice’ approach such as improvements in operations or better resource allocation.

Demand for, and Supply of, the Services of Primary Producer Representative Bodies in Queensland

In Queensland, at least 93 bodies exist to represent the interests of, and provide other services for, their farmer members, and their industries. The bodies vary greatly in focus, roles and activities, priorities, resources, size, and affiliations with other bodies. Results from a survey of 68 producer representative bodies (PRBs), and other data and information are used to examine the demand for, and supply of, farmer representational and other services in Queensland. The main results were: 1. member demand for services varies considerably between PRBs and is influenced by numerous factors; 2. members and non-members of one PRB vary significantly in the importance attached to some services; 3. the types of activities undertaken by PRBs varies between those for emerging and established industries; and 4. PRBs with paid staff/officers undertake more activities than others. The paper concludes that PRBs must continue to evolve and adapt their operations and structures to take account of changes in member and industry needs, external environments, cost pressures, resource availability, and sources of funding/assistance.

Functional and advanced functional and causal relationship diagrams for remote condition monitoring

Analysing the condition of an asset is a big challenge as there can be many aspects which can contribute to the overall functional reliability of the asset that have to be considered. In this paper we propose a two-step functional and causal relationship diagram (FCRD) to address this problem. In the first step, the FCRD is designed to facilitate the analysis of the condition of an asset by evaluating the interdependence (functional and causal) relationships between different components of the asset with the help of a relationship diagram. This is followed by the advanced FCRD (AFCRD) which refines the information from the FCRD into a comprehensive and manageable format. This new two-step methodology for asset condition monitoring is tested and validated for the case of a water treatment plant. © IMechE 2012.

Robust performance analysis on YAWL process models with advanced constructs

The importance of actively managing and analyzing business processes is acknowledged more than ever in organizations nowadays. Business processes form an essential part of an organization and their ap-plication areas are manifold. Most organizations keep records of various activities that have been carried out for auditing purposes, but they are rarely used for analysis purposes. This paper describes the design and implementation of a process analysis tool that replays, analyzes and visualizes a variety of performance metrics using a process definition and its execution logs. Performing performance analysis on existing and planned process models offers a great way for organizations to detect bottlenecks within their processes and allow them to make more effective process improvement decisions. Our technique is applied to processes modeled in the YAWL language. Execution logs of process instances are compared against the corresponding YAWL process model and replayed in a robust manner, taking into account any noise in the logs. Finally, performance characteristics, obtained from replaying the log in the model, are projected onto the model.

An example of cognitive obstacles in advanced integration: the case of scalar line integrals

Cognitive obstacles that arise in the teaching and learning of scalar line integrals, derived from cognitive aids provided to students when first learning about integration of single variable functions are described. A discussion of how and why the obstacles cause students problems is presented and possible strategies to overcome the obstacles are outlined.

Introduction: Culture, trade, services

Ben Goldsmith and Christina Spurgeon introduce the special 'Culture, trade, services' issue of Media International Australia.

Assessing the effectiveness of the child safety net : linkage of hospital and child protection services data on ‘maltreated’ and ‘unintentionally injured' children

-International recognition of need for public health response to child maltreatment -Need for early intervention at health system level -Important role of health professionals in identifying, reporting, documenting suspician of maltreatment -Up to 10% of all children presenting at ED’s are victims and without identification, 35% reinjured and 5% die -In Qld, mandatory reporting requirement for doctors and nurses for suspected abuse or neglect

The role of insulin in advanced prostate cancer

Advanced prostate cancer is a common and generally incurable disease. Androgen deprivation therapy is used to treat advanced prostate cancer with good benefits to quality of life and regression of disease. Prostate cancer invariably progresses however despite ongoing treatment, to a castrate resistant state. Androgen deprivation is associated with a form of metabolic syndrome, which includes insulin resistance and hyperinsulinaemia. The mitogenic and anti-apoptotic properties of insulin acting through the insulin and hybrid insulin/IGF-1 receptors seem to have positive effects on prostate tumour growth. This pilot study was designed to assess any correlation between elevated insulin levels and progression to castrate resistant prostate cancer. Methods: 36 men receiving ADT for advanced prostate cancer were recruited, at various stages of their treatment, along with 47 controls, men with localised prostate cancer pre-treatment. Serum measurements of C-peptide (used as a surrogate marker for insulin production) were performed and compared between groups. Correlation between serum C-peptide level and time to progression to castrate resistant disease was assessed. Results: There was a significant elevation of C-peptide levels in the ADT group (mean = 1639pmol/L)) compared to the control group (mean = 1169pmol/L), with a p-value of 0.025. In 17 men with good initial response to androgen deprivation, a small negative trend towards earlier progression to castrate resistance with increasing C-peptide level was seen in the ADT group (r = -0.050), however this did not reach statistical significance (p>0.1). Conclusions: This pilot study confirms an increase in serum C-peptide levels in men receiving ADT for advance prostate cancer. A non-significant, but negative trend towards earlier progression to castrate resistance with increasing C-peptide suggests the need for a formal prospective study assessing this hypothesis.

“We are not here to claim better services than any other” : Social exclusion among men from refugee backgrounds in urban and regional Australia

This paper reports on a mixed-methods study of social exclusion experiences among 233 resettled refugees living in urban and regional Queensland, Australia. The findings reported here are drawn from the SettleMEN project, a longitudinal investigation of health and settlement experiences among recently arrived adult men from refugee backgrounds conducted between 2008 and 2010. Using questionnaire surveys and semi-structured interviews, we examine four key dimensions of social exclusion: production, consumption, social relations, and services. We show that, overall, participants experienced high levels of social exclusion across all four dimensions. Participants living in regional areas were significantly more likely to be excluded from production, social relations, and services. We argue that there is a pressing need to tackle barriers to economic participation and discrimination in order to promote the social inclusion of men from refugee backgrounds.

Co-management to solve homelessness : wicked solutions to wicked problems

While governments are engaged in developing social policy responses to address wicked issues such as poverty, homelessness, drug addiction and crime, long term resolution of these issues through government policy making and state-based programmatic action has remained elusive. The use of vehicles for joint action and partnership between government and the community sector such as co-management has been offered as a way of harnessing productive capability and innovative capacity of both these sectors to resolve these complex problems. However, it is suggested that while there is a well advanced agenda with the intent for collaboration and partnership, working with the models for undertaking this joint action are not well understood and have not been fully developed or evaluated. This chapter examines new approaches to resolving the wicked issue of homelessness through applying the lens of co-management to understand the complexities of this issue and its resolution. The chapter analyses an attempt to move away from traditional bureaucratic structures of welfare departments, operating through single functional ‘silos’ to a new horizontal ‘hub-based’ model of service delivery that seeks to integrate actors across many different service areas and organizations. The chapter explores case studies of co-management in the establishment, development and operation of service hubs to address homelessness. We argue that the response to homelessness needs a ‘wicked solution’ that goes beyond simply providing shelter to those in need. The case of the hub models of community sector organizations working across organizational boundaries is evaluated to determine whether this approach can be considered successful co-managing of an innovative initiative, and understanding the requirements for developing, improving and extending this model. The role of the third sector in co-managing public services is examined through the in-depth case studies and the results are presented together with an assessment of how co-management can contribute to service quality and service management in public services.

Prisons, dietetic services, research and training : win win

Learning Outcome: Gain knowledge in the area of dietetic training in Australia and the benefits of collaborative partnerships between government and universities to achieve improvements in dietetic service delivery, evidenced based practice, and student placements. Prisoners have high rates of chronic disease, however dietetic services and research in this sector is limited. Securing high quality professional practice placements for dietetic training in Australia is competitive, and prisons provide exciting opportunities. Queensland University of Technology (QUT) has a unique twenty year partnership with Queensland Corrective Services (QCS) with a service learning model placing final year dietetic students within prisons. Building on this partnership, in 2007 a new joint position was funded to establish dietetic services to over 5500 prisoners and support viable best practice dietetic education. Evaluation of the past three years of this partnership has shown an expansion of QUT student placements in Queensland prisons, with a third of final year students each undertaking 120 hours of foodservice management practicum. Student evaluations of placement over this period are much higher than the University average. Through the joint position student projects have been targeted on strategic areas to support nutrition and dietetic policy and practice. Projects have been broadened from menu reviews to more comprehensive quality improvement and dietetic research activities, with all student learning activities transferrable to other foodservice settings. Student practice in the prisons has been extended beyond foodservice management to include group education and dietetic counseling. For QCS, student placements have equated to close to a full-time dietitian position, with nutrition policy now being implemented as an outcome of this support. This innovative partnership has achieved a sustainable student placement model, supported research, whilst delivering dietetic services to a difficult to access group. Funding Disclosure: None