Numerical simulation of axially loaded concrete columns under transverse impact and vulnerability assessment

With a view to assessing the vulnerability of columns to low elevation vehicular impacts, a non-linear explicit numerical model has been developed and validated using existing experimental results. The numerical model accounts for the effects of strain rate and confinement of the reinforced concrete, which are fundamental to the successful prediction of the impact response. The sensitivity of the material model parameters used for the validation is also scrutinised and numerical tests are performed to examine their suitability to simulate the shear failure conditions. Conflicting views on the strain gradient effects are discussed and the validation process is extended to investigate the ability of the equations developed under concentric loading conditions to simulate flexural failure events. Experimental data on impact force–time histories, mid span and residual deflections and support reactions have been verified against corresponding numerical results. A universal technique which can be applied to determine the vulnerability of the impacted columns against collisions with new generation vehicles under the most common impact modes is proposed. Additionally, the observed failure characteristics of the impacted columns are explained using extended outcomes. Based on the overall results, an analytical method is suggested to quantify the vulnerability of the columns.

Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading

This paper treats the crush behaviour and energy absorption response of foam-filled conical tubes subjected to oblique impact loading. Dynamic computer simulation techniques validated by experimental testing are used to carry out a parametric study of such devices. The study aims at quantifying the energy absorption of empty and foam-filled conical tubes under oblique impact loading, for variations in the load angle and geometry parameters of the tube. It is evident that foam-filled conical tubes are preferable as impact energy absorbers due to their ability to withstand oblique impact loads as effectively as axial impact loads. Furthermore, it is found that the energy absorption capacity of filled tubes is better maintained compared to that of empty tubes as the load orientation increases. The primary outcome of this study is design information for the use of foam-filled conical tubes as energy absorbers where oblique impact loading is expected.

A life jacket with holes- : a case study of 'temporary engagement' : a strategy used by Education Queensland to employ beginning secondary teachers

This research investigated the impact of Education Queensland's employment policy and practices for beginning secondary teachers appointed on temporary engagement. The context was the public secondary school sector within the state of Queensland, Australia. The study was set within a context of the changing nature of work from full-time permanent employment towards casual, fixed-term contracts, temporary and part-time employment, a trend reflected in the employment patterns for teachers within Australia. Two broad categories of literature relating to the research problem of this thesis were reviewed, namely the beginning teacher and permanency or tenure. The focus in the research literature on beginning teachers was the professional experiences of teachers within the classroom and school. There was a paucity of research that considered the working and industrial conditions of temporary employment for beginning teachers or the personal and professional implications of this form of employment. The review of the context and literature was conceptualised as a Beginning Temporary Teacher Theoretical Framework which served to inform the study. Using a qualitative case study methodology, the research techniques employed for the thesis were semi-structured interview and document analysis. A simultaneously conducted research project in which the researcher participated entitled 'Winning the Lottery? Beginning Teachers on Temporary Engagement' foregrounded this thesis in terms of refining the research question, contributing to the literature and in the selection of the participants. For this case study the perspectives of four distinct yet inter-related categories of professionals were sought. These included four beginning secondary teachers, three school administrators, a Senior Personnel Officer with Education Queensland, and a representative from the Queensland Teachers' Union. The research findings indicated that none of the beginning teachers or other professionals viewed starting a career in teaching on temporary engagement as the ideal. The negative features identified were the differential treatment received and the high level of uncertainty associated with temporary employment. Differential treatment tended to indicate 'less' entitlements, in terms of access to induction and professional development, recreational and sick leave, acceptance by and expectations of other colleagues, and avenues of redress in grievance cases. Moreover, interviews indicated a high level of uncertainty in terms of starting within the teaching profession, commencing at a new school, and a regular income. In addition, frequent changes in schools and/or cohorts of students exacerbated levels of uncertainty. The beginning teachers reported significantly decreased motivation, self-esteem and sense of belonging, and increased stress levels. There was an even more marked negative impact on those beginning teachers who had experienced a higher number of temporary engagements and schools in their first year of teaching. Conversely, strong staff support and a reasonable length of time in the one school improved the quality of the beginning teachers' experiences. The overall impact of being on temporary engagement resulted in delayed permanent position appointments, decreased commitment to particular schools and to Education Queensland as the employing authority, and for two of the beginning teachers, it produced a desire to seek alternative employment. The implementation of Education Queensland's policies relating to working conditions and entitlements for these temporary beginning teachers at the school level was revealed to be less than satisfactory. There was a tendency towards 'just-in- time' management of the beginning teacher on temporary engagement. The beginning teachers received 'less-than-messages' about access to and use of departmental documentation, support through induction and professional development, and their transition from temporary to permanent employment. To ensure a more systematic, supportive and inclusive process for managing the temporary beginning teacher, a conceptual framework entitled 'Continuums of Tension' was developed. The four continuums included permanent employment - temporary employment; system perspective - individual perspective; teaching as a profession - teaching as a job; and the permanent beginning teacher - university graduate. The general principles of the human resource policies of Education Queensland were based on a commitment to permanent employment, a system's perspective, viewing teaching as a profession and a homogeneous group of permanent beginning teachers. Contrasting with this, the beginning teacher on temporary engagement tended to operate from the position of temporary employment and a perspective that was individually based. Their priorities therefore included the 'occupational' aspects of being a temporary teacher striving to become permanent. Thus there existed a tension or contradiction between the general principles of human resource policies within Education Queensland and the employment experiences of beginning teachers on temporary engagement. The study proposed three actions for resolution to address the aforementioned tensions. The actions included: (a) the effective provision and targeted communication of information; (b) support, induction and professional development; and (c) a coordinated approach between Education Queensland, Queensland Teachers' Union, the Universities and the beginning teacher. These actions are fm1her refined to include: (a) an induction kit to suppm1 the individual through the pre-employment to permanent employee phases, (b) an extrapolation of the roles and responsibilities of Education Queensland personnel charged with supporting the beginning temporary teacher, and (c) a series of recommendations to effect a coordinated approach amongst the key stakeholders. The theoretical and conceptual frameworks have provided a means of addressing the identified needs of the beginning teacher on temporary engagement. As such, this study has contributed to the research literature on teacher employment and professionalism and aims to provide a beginning temporary teacher with managed professional and occupational support.

Eucharistic rituals in Catholic primary schools in the Archdiocese of Brisbane : a study of administrators' conceptions

The focus of this study is the celebration of Eucharist in Catholic primary schools within the Archdiocese of Brisbane. The context of the contemporary Australian Catholic primary school embodies certain 'problematical realities' in relation to the time-honoured way in which school Eucharistic rituals have been celebrated. These contemporary realities raise a number of issues that impact on school celebrations of Eucharist. The purpose of this study is to explore administrators' differing conceptions of school Eucharistic rituals in an attempt to investigate some of these issues and assist members of individual school communities as they strive to make celebrations of Eucharist appropriate and meaningful for the group gathered. The phenomenographic research approach was adopted, as it is well suited to the purpose of this study and the nature of the research question. Phenomenography is essentially a study of variation. It attempts to map the 'whole' phenomenon under investigation by describing on equal terms all conceptions of the phenomenon and establishing an ordered relationship among them. The purpose of this study and the nature of the research question necessitate an approach that allows the identification and description of the different ways in which administrators' experience school Eucharistic rituals. Accordingly, phenomenography was selected. Members of the Administration Team, namely the principal, the APRE (Assistant to the Principal Religious Education) and, in larger primary schools, the AP A (Assistant to the Principal Administration) share responsibility for leading change in Catholic primary schools in the Archdiocese of Brisbane. In practice, however, principals delegate the role of leading the development of the school's religion program and providing leadership in the religious life of the school community to the APRE (Brisbane Catholic Education, 1997). Informants in this study are nineteen APREs from a variety of Catholic primary schools in the Archdiocese of Brisbane. These APREs come from schools across the archdiocese, rather than from within one particular region. Several significant findings resulted from this study. Firstly, the data show that there are significant differences in how APREs' experience school Eucharistic rituals, although the number of these qualitatively different conceptions is quite limited. The study identifies and describes six distinct yet related conceptions of school Eucharistic rituals. The logical relationship among these conceptions (the outcome space) is presented in the form of a diagram with accompanying explication. The variation among the conceptions is best understood and described in terms of three dimensions of the role of Eucharist in the Catholic primary school and is represented on the model of the outcome space. Individual transcripts suggest that individual APREs tend to emphasise some conceptions more than others. It is the contention of the present study that change in the practice of school Eucharistic rituals is unlikely to occur until all of a school community's conceptions are brought out into the open and articulated. As leaders of change, APREs need to be alerted to their own biases and become aware of alternative ways of conceiving school Eucharistic ritual. It is proposed that the different categories of description and dimensions, represented by the model of the outcome space, can be used to help in the process of articulating a school community's conceptions of Eucharist, with the APRE as facilitator of this process. As a result, the school community develops a better understanding of why their particular school does what it does in relation to school Eucharistic rituals.

The regulation of insurance intermediaries in the Australian financial services market

The insurance industry discharges a critical role in the Australian economy and is a significant part of the Australian financial services market. The industry relies upon intermediaries, the principal types being brokers and agents, to promote, arrange and distribute their products and services in the market. The pivotal role that they play in this context and sensitivities associated with the consumer oriented products, such as house and contents insurance, has ensured close regulatory attention. Of particular importance was the passage of the Insurance (Agents and Brokers) Act 1984 (Cth), a comprehensive attempt to address the responsibilities of intermediaries as well as particular problem areas associated with the handling of money. However, with the introduction of financial services and market reform early in the new millennium this insurance intermediary specific regulatory approach was abandoned in favour of a market-wide strategy; that is, market reform was based upon across-the-board licensing, disclosure, conduct and fairness standards, and all financial products and services are now regulated at a generic level under Ch 7 of the Corporations Act 2001 (Cth). This article briefly explores the categories of insurance intermediaries and the relevant distinctions between them but focuses mainly upon the regulatory context in which they operate. This context transcends a strictly legal framework as the regulatory body, the Australian Securities and Investments Commission (ASIC), has sought to inform and guide the market through Policy Statements and Regulatory Guides. The usefulness of these guides as an adjunct to the legislation in explaining the scope and operation of regulatory framework is examined. In addition, the article looks at the self-regulatory and dispute resolution practices in this area and their impact. In conclusion an assessment of this across-the-board regulatory regime is advanced.

Die Geographie der Kreativen Klasse in Deutschland [The geography of the Creative Class in Germany]

We analyze the regional distribution of different categories of creative individuals in Germany. Generally, the share of creative people is higher in cities as compared to the rural area The freelancing artists are a kind of exception in this respect; they constitute a relatively high share of the population in some rural area A high share of creative people in a region can be explained by a high level of public provisions and a high share of foreign born population, which can be regarded as an indicator of the “openness” in the local milieu. Good employment opportunities have only a relatively weak impact. Regions with a high share of creatives tend to have an above average level of new business formation, a high level of innovation and a relatively high share of employees in high-tech industries.

Measurable progress? Teaching artsworkers to assess and articulate the impact of their work

The National Cultural Policy Discussion Paper—drafted to assist the Australian Government in developing the first national Cultural Policy since Creative Nation nearly two decades ago—envisages a future in which arts, cultural and creative activities directly support the development of an inclusive, innovative and productive Australia. "The policy," it says, "will be based on an understanding that a creative nation produces a more inclusive society and a more expressive and confident citizenry by encouraging our ability to express, describe and share our diverse experiences—with each other and with the world" (Australian Government 3). Even a cursory reading of this Discussion Paper makes it clear that the question of impact—in aesthetic, cultural and economic terms—is central to the Government's agenda in developing a new Cultural Policy. Hand-in-hand with the notion of impact comes the process of measurement of progress. The Discussion Paper notes that progress "must be measurable, and the Government will invest in ways to assess the impact that the National Cultural Policy has on society and the economy" (11). If progress must be measurable, this raises questions about what arts, cultural and creative workers do, whether it is worth it, and whether they could be doing it better. In effect, the Discussion Paper pushes artsworkers ever closer to a climate in which they have to be skilled not just at making work, but at making the impact of this work clear to stakeholders. The Government in its plans for Australia's cultural future, is clearly most supportive of artsworkers who can do this, and the scholars, educators and employers who can best train the artsworkers of the future to do this.

Reviewing the impact of the 2008/2009 global financial crisis (GFC) on international property markets and property professions

The global financial crisis that impacted on all world economies throughout 2008 and 2009. This impact has not been confined to the finance industries but has had a direct and indirect impact on the property industry worldwide from both an ownership and investment perspective. Property markets have experienced various levels of impact from this event, but universally the greatest impact has been on the traditional commercial and industrial property sectors from the investor perspective, with investment and superannuation funds reporting significant declines in the reported value of these investments. Despite the very direct impact of these declining property markets, the GFC has also had a very significant indirect impact on the various property professions and how these professions are now operating in this declining property market. Of particular interest is the comparison of the property market forecasts in late 2007 to the actual results in 2008/2009.

The development of ground impact models for the analysis of the risks associated with Unmanned Aircraft Operations over inhabited areas

With the emergence of Unmanned Aircraft Systems (UAS) there is a growing need for safety standards and regulatory frameworks to manage the risks associated with their operations. The primary driver for airworthiness regulations (i.e., those governing the design, manufacture, maintenance and operation of UAS) are the risks presented to people in the regions overflown by the aircraft. Models characterising the nature of these risks are needed to inform the development of airworthiness regulations. The output from these models should include measures of the collective, individual and societal risk. A brief review of these measures is provided. Based on the review, it was determined that the model of the operation of an UAS over inhabited areas must be capable of describing the distribution of possible impact locations, given a failure at a particular point in the flight plan. Existing models either do not take the impact distribution into consideration, or propose complex and computationally expensive methods for its calculation. A computationally efficient approach for estimating the boundary (and in turn area) of the impact distribution for fixed wing unmanned aircraft is proposed. A series of geometric templates that approximate the impact distributions are derived using an empirical analysis of the results obtained from a 6-Degree of Freedom (6DoF) simulation. The impact distributions can be aggregated to provide impact footprint distributions for a range of generic phases of flight and missions. The maximum impact footprint areas obtained from the geometric template are shown to have a relative error of typically less than 1% compared to the areas calculated using the computationally more expensive 6DoF simulation. Computation times for the geometric models are on the order of one second or less, using a standard desktop computer. Future work includes characterising the distribution of impact locations within the footprint boundaries.

Impact fees and new housing cost: A comparative analysis of the empirical models

Developers and policy makers are consistently at odds over the debate as to whether impact fees increase house prices. This debate continues despite the extensive body of theoretical and empirical international literature that discusses the passing on to home buyers of impact fees, and the corresponding increase to housing prices. In attempting to quantify this impact, over a dozen empirical studies have been carried out in the US and Canada since the 1980’s. However the methodologies used vary greatly, as do the results. Despite similar infrastructure funding policies in numerous developed countries, no such empirical works exist outside of the US/Canada. The purpose of this research is to analyse the existing econometric models in order to identify, compare and contrast the theoretical bases, methodologies, key assumptions and findings of each. This research will assist in identifying if further model development is required and/or whether any of these models have external validity and are readily transferable outside of the US. The findings conclude that there is very little explicit rationale behind the various model selections and that significant model deficiencies appear still to exist.

Arts practice and disconnected youth in Australia : impact and domains of change

Background: This paper describes research conducted with Big hART, Australia's most awarded participatory arts company. It considers three projects, LUCKY, GOLD and NGAPARTJI NGAPARTJI across separate sites in Tasmania, Western NSW and Northern Territory, respectively, in order to understand project impact from the perspective of project participants, Arts workers, community members and funders. Methods: Semi-structured interviews were conducted with 29 respondents. The data were coded thematically and analysed using the constant comparative method of qualitative data analysis. Results: Seven broad domains of change were identified: psychosocial health; community; agency and behavioural change; the Art; economic effect; learning and identity. Conclusions: Experiences of participatory arts are interrelated in an ecology of practice that is iterative, relational, developmental, temporal and contextually bound. This means that questions of impact are contingent, and there is no one path that participants travel or single measure that can adequately capture the richness and diversity of experience. Consequently, it is the productive tensions between the domains of change that are important and the way they are animated through Arts practice that provides sign posts towards the impact of Big hART projects.

The impact of heatwaves on emergency department visits in Brisbane, Australia : a time series study

Introduction The acute health effects of heatwaves in a subtropical climate and their impact on emergency departments (ED) are not well known. The purpose of this study is to examine overt heat-related presentations to EDs associated with heatwaves in Brisbane. Methods Data were obtained for the summer seasons (December to February) from 2000-2012. Heatwave events were defined as two or more successive days with daily maximum temperature >=34[degree sign]C (HWD1) or >=37[degree sign]C (HWD2). Poisson generalised additive model was used to assess the effect of heatwaves on heat-related visits (International Classification of Diseases (ICD) 10 codes T67 and X30; ICD 9 codes 992 and E900.0). Results Overall, 628 cases presented for heat-related illnesses. The presentations significantly increased on heatwave days based on HWD1 (relative risk (RR) = 4.9, 95% confidence interval (CI): 3.8, 6.3) and HWD2 (RR = 18.5, 95% CI: 12.0, 28.4). The RRs in different age groups ranged between 3-9.2 (HWD1) and 7.5-37.5 (HWD2). High acuity visits significantly increased based on HWD1 (RR = 4.7, 95% CI: 2.3, 9.6) and HWD2 (RR = 81.7, 95% CI: 21.5, 310.0). Average length of stay in ED significantly increased by >1 hour (HWD1) and >2 hours (HWD2). Conclusions Heatwaves significantly increase ED visits and workload even in a subtropical climate. The degree of impact is directly related to the extent of temperature increases and varies by socio-demographic characteristics of the patients. Heatwave action plans should be tailored according to the population needs and level of vulnerability. EDs should have plans to increase their surge capacity during heatwaves.

Impact and energy absorption of portable water-filled road safety barrier system fitted with foam

Portable water-filled barriers (PWFBs) are roadside appurtenances that are used to prevent errant vehicles from penetrating into temporary construction zones on roadways. A numerical model of the composite PWFB, consisting of a plastic shell, steel frame, water and foam was developed and validated against results from full scale experimental tests. This model can be extended to larger scale impact cases, specifically ones that include actual vehicle models. The cost-benefit of having a validated numerical model is significant and this allows the road barrier designer to conduct extensive tests via numerical simulations prior to standard impact tests Effects of foam cladding as additional energy absorption material in the PWFB was investigated. Different types of foam were treated and it was found that XPS foam was the most suitable foam type. Results from this study will aid PWFB designers in developing new generation of roadside structures which will provide enhanced road safety.

The learning capability of construction organisations engaged in collaborative contracting - Literature Review [industry report]

Background Value for money (VfM) on collaborative construction projects is dependent on the learning capabilities of the organisations and people involved. Within the context of infrastructure delivery, there is little research about the impact of organisational learning capability on project value. The literature contains a multiplicity of often un-testable definitions about organisational learning abilities. This paper defines learning capability as a dynamic capability that participant organisations purposely develop to add value to collaborative projects. The paper reports on a literature review that proposes a framework that conceptualises learning capability to explore the topic. This work is the first phase of a large-scale national survey funded by the Alliancing Association of Australasia and the Australian Research Council. Methodology Desk-top review of leading journals in the areas of strategic management, strategic alliances and construction management, as well as recent government documents and industry guidelines, was undertaken to synthesise, conceptualise and operationalise the concept of learning capability. The study primarily draws on the theoretical perspectives of the resource-based view of the firm (e.g. Barney 1991; Wernerfelt 1984), absorptive capacity (e.g. Cohen and Levinthal 1990; Zahra and George 2002); and dynamic capabilities (e.g. Helfat et al. 2007; Teece et al. 1997; Winter 2003). Content analysis of the literature was undertaken to identify key learning routines. Content analysis is a commonly used methodology in the social sciences area. It provides rich data through the systematic and objective review of literature (Krippendorff 2004). NVivo 9, a qualitative data analysis software package, was used to assist in this process. Findings and Future Research The review process resulted in a framework for the conceptualisation of learning capability that shows three phases of learning: (1) exploratory learning, (2) transformative learning and (3) exploitative learning. These phases combine both internal and external learning routines to influence project performance outcomes and thus VfM delivered under collaborative contracts. Sitting within these phases are eight categories of learning capability comprising knowledge articulation, identification, acquisition, dissemination, codification, internationalisation, transformation and application. The learning routines sitting within each category will be disaggregated in future research as the basis for measureable items in a large-scale survey study. The survey will examine the extent to which various learning routines influence project outcomes, as well as the relationships between them. This will involve identifying the routines that exist within organisations in the construction industry, their resourcing and rate of renewal, together with the extent of use and perceived value within the organisation. The target population is currently estimated to be around 1,000 professionals with experience in relational contracting in Australia. This future research will build on the learning capability framework to provide data that will assist construction organisations seeking to maximise VfM on construction projects.

An examination of isotherm generation : impact of bottle-point method upon potassium ion exchange with strong acid cation resin

This paper relates to the importance of impact of the chosen bottle-point method when conducting ion exchange equilibria experiments. As an illustration, potassium ion exchange with strong acid cation resin was investigated due to its relevance to the treatment of various industrial effluents and groundwater. The “constant mass” bottle-point method was shown to be problematic in that depending upon the resin mass used the equilibrium isotherm profiles were different. Indeed, application of common equilibrium isotherm models revealed that the optimal fit could be with either the Freundlich or Temkin equations, depending upon the conditions employed. It could be inferred that the resin surface was heterogeneous in character, but precise conclusions regarding the variation in the heat of sorption were not possible. Estimation of the maximum potassium loading was also inconsistent when employing the “constant mass” method. The “constant concentration” bottle-point method illustrated that the Freundlich model was a good representation of the exchange process. The isotherms recorded were relatively consistent when compared to the “constant mass” approach. Unification of all the equilibrium isotherm data acquired was achieved by use of the Langmuir Vageler expression. The maximum loading of potassium ions was predicted to be at least 116.5 g/kg resin.