Addressing quality teaching in hard to staff settings : the Exceptional Teachers for Disadvantaged Schools Project

This Exceptional Teachers for Disadvantaged Schools (ETDS) project sets out to design a new model of Australian teacher education responding to recent demands for quality education in low SES and disadvantaged schools. The project moves teacher education from the ‘missionary’ (Larabee, 2010) or deficit (Comber and Kamler 2004; Flessa, 2007) approaches, towards a focus on notions of quality and academic excellence. Rice (2008, p.1) argues for a need to place more of the “very best teachers into the most challenging schools”, yet the problem is not merely one of training more teachers, for disadvantaged schools already receive disproportionate numbers of beginning teachers (Connell, 1994; Vickers & Ferfolja, 2006). Rather, Grossman and Loeb (2010, p. 245) argue the problem centers on the common practice of “[p]lacing the least experienced teachers with the most needy students”. This paper reports on the first year trial of the project. The ETDS project is at present, the only mainstream Australian teacher education model that targets cohorts of academically high achieving pre-service teachers with the overt aim of preparing graduates of the program to teach in disadvantaged schools. At the end of its first year, the ETDS program graduated 20 new teachers, each of whom had over the previous 18 months engaged with a specialized curriculum and carefully monitored/scaffolded practicum placements in disadvantaged schools around Brisbane, Australia.

Good secrets, bad secrets : disclosure in children’s picture books about sexual child abuse

Well over 50 picture books have been published for children on the topic of sexual child abuse (Lampert & Walsh, 2010) many with the aim of teaching their very young readers how to tell the difference between good and bad secrets. This paper looks at three recent picture books for how they focus on disclosure as an end point.

Prosecutorial discretion in assisted dying in Canada : a proposal for charging guidelines

An Expert Panel of the Royal Society of Canada and a Select Committee of the Québec National Assembly both recently recommended the issuance of permissive guidelines for the exercise of prosecutorial discretion on voluntary euthanasia and assisted suicide and “medical aid in dying” respectively. It seems timely, therefore, to propose a set of offence-specific guidelines for how prosecutorial discretion should be exercised in cases of voluntary euthanasia and assisted suicide in Canadian provinces and territories. We take as our starting point the only existing guidelines of this sort currently in force in the world (i.e. the British Columbia Guidelines, and the England and Wales Guidelines). In light of certain concerns we have with these guidelines, we outline an approach to constructing guidelines for Canadian jurisdictions that begins with identifying three guiding principles we argue are appropriate for this purpose (respect for autonomy, the need for high-quality prosecutorial decision making, and the importance of public confidence in that decision making), and ends with a concrete and detailed set of proposed guidelines. The paper is consistent with, but also extends, the work of the Royal Society of Canada Expert Panel on End of Life Decision Making. Un panel d’expert de la Société Royale du Canada et une Commission spéciale de l’Assemblée nationale du Québec ont tous les deux récemment recommandé que soit émises des directives permettant exercice d’un pouvoir de poursuite discrétionnaire concernant l’euthanasie et le suicide assisté et « l’assistance médicale pour mourir », respectivement. Il semble donc à propos de proposer une série de directives spécifiques aux offenses sur la façon dont le pouvoir de poursuite discrétionnaire dans les territoires et provinces canadiennes serait appliqué dans les cas d’euthanasie et de suicide assisté. Nous avons pris comme point de départ les seules directives de la sorte existant déjà (c’est-à-dire celle de la Colombie-Britannique et de l’Angleterre et du Pays de Galles). Par contre, compte tenu de certaines de nos réserves concernant ces directives, nous avons ensuite établi les grandes lignes d’une approche permettant de mettre sur pied des directives pour les juridictions canadiennes, qui débute par l’identification de trois principes de base qui sont selon nous appropriées à cette fin (respect de l’autonomie, besoin pour une grande qualité de prise de prise de décision du poursuivant et la confiance du public envers cette prise de décision) pour se terminer par une série de directives concrètes et détaillées. Le présent document est compatible avec le travail de la Société royale du Canada tout en en augmentant la portée.

Factors influencing funding decisions by elected politicians at the state/provincial level : a case study of public libraries in Canada

The purpose of this study was to determine factors (internal and external) that influenced Canadian provincial (state) politicians when making funding decisions about public libraries. Using the case study methodology, Canadian provincial/state level funding for public libraries in the 2009-10 fiscal year was examined. After reviewing funding levels across the country, three jurisdictions were chosen for the case: British Columbia's budget revealed dramatically decreased funding, Alberta's budget showed dramatically increased funding, and Ontario's budget was unchanged from the previous year. The primary source of data for the case was a series of semi-structured interviews with elected officials and senior bureaucrats from the three jurisdictions. An examination of primary and secondary documents was also undertaken to help set the political and economic context as well as to provide triangulation for the case interviews. The data were analysed to determine whether Cialdini's theory of influence (2001) and specifically any of the six tactics of influence (i.e, commitment and consistency, authority, liking, social proof, scarcity and reciprocity) were instrumental in these budget processes. Findings show the principles of "authority", "consistency and commitment" and "liking" were relevant, and that "liking" were especially important to these decisions. When these decision makers were considering funding for public libraries, they most often used three distinct lenses: the consistency lens (what are my values? what would my party do?), the authority lens (is someone with hierarchical power telling me to do this? are the requests legitimate?), and most importantly, the liking lens (how much do I like and know about the requester?). These findings are consistent with Cialdini's theory, which suggests the quality of some relationships is one of six factors that can most influence a decision maker. The small number of prior research studies exploring the reasons for increases or decreases in public library funding allocation decisions have given little insight into the factors that motivate those politicians involved in the process and the variables that contribute to these decisions. No prior studies have examined the construct of influence in decision making about funding for Canadian public libraries at any level of government. Additionally, no prior studies have examined the construct of influence in decision making within the context of Canadian provincial politics. While many public libraries are facing difficult decisions in the face of uncertain funding futures, the ability of the sector to obtain favourable responses to requests for increases may require a less simplistic approach than previously thought. The ability to create meaningful connections with individuals in many communities and across all levels of government should be emphasised as a key factor in influencing funding decisions.

Information accountability and usability : are there any connections?

Availability of health information is rapidly increasing and the expansion and proliferation of health information is inevitable. The Electronic Healthcare Record, Electronic Medical Record and Personal Health Record are at the core of this trend and are required for appropriate and practicable exchange and sharing of health information. However, it is becoming increasingly recognized that it is essential to preserve patient privacy and information security when utilising sensitive information for clinical, management and administrative processes. Furthermore, the usability of emerging healthcare applications is also becoming a growing concern. This paper proposes a novel approach for integrating consideration of information accountability with a perspective from usability engineering that can be applied when developing healthcare information technology applications. A social networking user case in the healthcare information exchange will be presented in the context of our approach.

Post-genomic science & society : Getting our fangs into omics science and its implications

Genomics and genetic findings have been hailed with promises of unlocked codes and new frontiers of personalized medicine. Despite cautions about gene hype, the strong cultural pull of genes and genomics has allowed consideration of genomic personhood. Populated by the complicated records of mass spectrometer, proteomics, which studies the human protein, has not achieved either the funding or the popular cultural appeal proteomics scientists had hoped it would. While proteomics, being focused on the proteins that actually indicate and create disease states, has a more direct potential for clinical applications than genomic risk predictions, culturally, it has not provided the material for identity creation. In our ethnographic research, we explore how proteomic scientists attempting to shape an appeal to personhood through which legitimacy may be defined.

The People-Game-Play model for understanding videogames’ impact on wellbeing

Given the increasing popularity of videogames, understanding when, how and for whom they have a positive or negative impact on wellbeing is critical. We propose a model for exploring these questions based on existing literature and our own research. The People-Game-Play model identifies player characteristics, game features and the experience of play as key determinants of the impact of videogame play on wellbeing. We propose research exploring the relationships within and between each of these key factors is needed and identify some examples of future research in this space.

Does activity in computer game play have an impact on creative behavior?

This paper describes a behaviour analysis designed to measure the creative potential of computer game activities. The research approach applies a behavioural and verbal protocol to analyze the factors that influence the creative processes used by people as they play computer games from the puzzle genre. Creative components are measured by examining task motivation as well as domain-relevant and creativity-relevant skills factors. This paper focuses on how three puzzle games embody activity that might facilitate creative processes. The findings show that game playing activities significantly impact upon creative potential of computer games.

Utilizing Wide-Area Signals for off-center SVCs to damp interarea oscillations

Wide-Area Measurement Systems (WAMS) provide the opportunity of utilizing remote signals from different locations for the enhancement of power system stability. This paper focuses on the implementation of remote measurements as supplementary signals for off-center Static Var Compensators (SVCs) to damp inter-area oscillations. Combination of participation factor and residue method is used for the selection of most effective stabilizing signal. Speed difference of two generators from separate areas is identified as the best stabilizing signal and used as a supplementary signal for lead-lag controller of SVCs. Time delays of remote measurements and control signals is considered. Wide-Area Damping Controller (WADC) is deployed in Matlab Simulink framework and is tested under different operating conditions. Simulation results reveal that the proposed WADC improve the dynamic characteristic of the system significantly.

A framework of Dynamic Difficulty Adjustment in competitive multiplayer video games

The balance between player competence and the challenge presented by a task has been acknowledged as a major factor in providing optimal experience in video games. While Dynamic Difficulty Adjustment (DDA) presents methods for adjusting difficulty in real-time during singleplayer games, little research has explored its application in competitive multiplayer games where challenge is dictated by the competence of human opponents. By conducting a formal review of 180 existing competitive multiplayer games, it was found that a large number of modern games are utilizing DDA techniques to balance challenge between human opponents. From this data, we propose a preliminary framework for classifying Multiplayer Dynamic Difficulty Adjustment (mDDA) instances.

Setting water quality objectives for the health of freshwater fish

An important responsibility of the Environment Protection Authority, Victoria, is to set objectives for levels of environmental contaminants. To support the development of environmental objectives for water quality, a need has been identified to understand the dual impacts of concentration and duration of a contaminant on biota in freshwater streams. For suspended solids contamination, information reported by Newcombe and Jensen [ North American Journal of Fisheries Management , 16(4):693--727, 1996] study of freshwater fish and the daily suspended solids data from the United States Geological Survey stream monitoring network is utilised. The study group was requested to examine both the utility of the Newcombe and Jensen and the USA data, as well as the formulation of a procedure for use by the Environment Protection Authority Victoria that takes concentration and duration of harmful episodes into account when assessing water quality. The extent to which the impact of a toxic event on fish health could be modelled deterministically was also considered. It was found that concentration and exposure duration were the main compounding factors on the severity of effects of suspended solids on freshwater fish. A protocol for assessing the cumulative effect on fish health and a simple deterministic model, based on the biology of gill harm and recovery, was proposed. References D. W. T. Au, C. A. Pollino, R. S. S Wu, P. K. S. Shin, S. T. F. Lau, and J. Y. M. Tang. Chronic effects of suspended solids on gill structure, osmoregulation, growth, and triiodothyronine in juvenile green grouper epinephelus coioides . Marine Ecology Press Series , 266:255--264, 2004. J.C. Bezdek, S.K. Chuah, and D. Leep. Generalized k-nearest neighbor rules. Fuzzy Sets and Systems , 18:237--26, 1986. E. T. Champagne, K. L. Bett-Garber, A. M. McClung, and C. Bergman. {Sensory characteristics of diverse rice cultivars as influenced by genetic and environmental factors}. Cereal Chem. , {81}:{237--243}, {2004}. S. G. Cheung and P. K. S. Shin. Size effects of suspended particles on gill damage in green-lipped mussel perna viridis. Marine Pollution Bulletin , 51(8--12):801--810, 2005. D. H. Evans. The fish gill: site of action and model for toxic effects of environmental pollutants. Environmental Health Perspectives , 71:44--58, 1987. G. C. Grigg. The failure of oxygen transport in a fish at low levels of ambient oxygen. Comp. Biochem. Physiol. , 29:1253--1257, 1969. G. Holmes, A. Donkin, and I.H. Witten. {Weka: A machine learning workbench}. In Proceedings of the Second Australia and New Zealand Conference on Intelligent Information Systems , volume {24}, pages {357--361}, {Brisbane, Australia}, {1994}. {IEEE Computer Society}. D. D. Macdonald and C. P. Newcombe. Utility of the stress index for predicting suspended sediment effects: response to comments. North American Journal of Fisheries Management , 13:873--876, 1993. C. P. Newcombe. Suspended sediment in aquatic ecosystems: ill effects as a function of concentration and duration of exposure. Technical report, British Columbia Ministry of Environment, Lands and Parks, Habitat Protection branch, Victoria, 1994. C. P. Newcombe and J. O. T. Jensen. Channel suspended sediment and fisheries: A synthesis for quantitative assessment of risk and impact. North American Journal of Fisheries Management , 16(4):693--727, 1996. C. P. Newcombe and D. D. Macdonald. Effects of suspended sediments on aquatic ecosystems. North American Journal of Fisheries Management , 11(1):72--82, 1991. K. Schmidt-Nielsen. Scaling. Why is animal size so important? Cambridge University Press, NY, 1984. J. S. Schwartz, A. Simon, and L. Klimetz. Use of fish functional traits to associate in-stream suspended sediment transport metrics with biological impairment. Environmental Monitoring and Assessment , 179(1--4):347--369, 2011. E. Al Shaw and J. S. Richardson. Direct and indirect effects of sediment pulse duration on stream invertebrate assemb ages and rainbow trout ( Oncorhynchus mykiss ) growth and survival. Canadian Journal of Fish and Aquatic Science , 58:2213--2221, 2001. P. Tiwari and H. Hasegawa. {Demand for housing in Tokyo: A discrete choice analysis}. Regional Studies , {38}:{27--42}, {2004}. Y. Tramblay, A. Saint-Hilaire, T. B. M. J. Ouarda, F. Moatar, and B Hecht. Estimation of local extreme suspended sediment concentrations in california rivers. Science of the Total Environment , 408:4221--

Translations of industry-based student learning and academic performances

We hypothesized that Industry based learning and teaching, especially through industry assigned student projects or training programs, is an integral part of science, technology, engineering and mathematics (STEM) education. In this paper we show that industry-based student training and experience increases students’ academic performances independent to the organizational parameters and contexts. The literature on industry-based student training focuses on employability and the industry dimension, and neglects in many ways the academic dimension. We observed that the association factors between academic attributes and contributions of industry-based student training are central and vital to the technological learning experiences. We explore international initiatives and statistics collected of student projects in two categories: Industry based learning performances and on campus performances. The data collected were correlated to five (5) universities in different industrialized countries, e.g., Australia N=545, Norway N=279, Germany N=74, France N=107 and Spain N=802 respectively. We analyzed industry-based student training along with company assigned student projects compared with in comparisons to campus performance. The data that suggests a strong correlation between industry-based student training per se and improved performance profiles or increasing motivation shows that industry-based student training increases student academic performance independent of organizational parameters and contexts. The programs we augmented were orthogonal to each other however, the trend of the students’ academic performances are identical. An isolated cohort for the reported countries that opposed our hypothesis warrants further investigation.

Transformation in educational practices through STEM

The need for strong science, technology and innovation linkages between Higher Education Institutions (HEIs) and industries is a pivotal point for middle-income countries in their endeavor to enhance human capital in socioeconomic development. Currently, the University-Industry partnerships are at an infant stage in Sri Lankan higher education context. Technological maturity and effective communication skills are contributing factors for an efficient graduate profile. Also, expanding internship programs in particular for STEM disciplines provide work experience to students that would strengthen the relevance of higher education programs. This study reports historical overviews and current trends in STEM education in Sri Lanka. Emphasis will be drawn to recent technological and higher education curricular reforms. Data from the last 10 years were extracted from the higher education sector and Ministry of Higher Education Policy portfolios. Associations and trend analysis of the sector growth were compared with STEM existence, merger and predicted augmentations. Results were depicted and summarised based on STEM streams and disciplines. It was observed that the trend of STEM augmentation in the Sri Lankan Higher Education context is growing at a slow but steady pace. Further analysis with other sectors in particular, Industry information, would be useful and a worthwhile exercise.

STEM education for sustainable development : a sociotechnical analysis

It is debated that for sustainable STEM education and knowledge investment, human centered learning design approach is critical and important. Sustainability in this context is enduring maintenance of technological trajectories for productive economical and social interactions by demonstrating life critical scenarios through life critical system development and life experiences. Technology influences way of life and the learning and teaching process. Social software application development is more than learning of how to program a software application and extracting information from the Internet. Hence, our research challenge is, how do we attract learners to STEM social software application development? Our realisation processes begin with comparing Science and Technology education in developed (e.g., Australia) and developing (e.g., Sri Lanka) countries with distinction on final year undergraduates’ industry ready training programmes. Principal components analysis was performed to separate patterns of important factors. To measure behavioural intention of perceived usefulness and attitudes of the training, the measurement model was analysed to test its validity and reliability using partial least square (PLS) analysis of structural equation modelling (SEM). Our observation is that the relationship is more complex than we argue for. Our initial conclusions were that life critical system development and life experience trajectories as determinant factors while technological influences were unavoidable. A further investigation should involve correlations between human centered learning design approach and economical development in the long run.

Does usability engineering matters for STEM education?

Technological maturity and the exponential growth of digital applications are contributing to lifestyle changes worldwide. Consequently, learning and teaching is demanding more effective sociotechnical interactions involving emerging technologies, as opposed to traditional, conventional face-to-face learning and teaching approaches. In this context, usability engineering is making significant contributions for improving computer and distance-based learning, both for learners and instructors, which have often been ignored when designing online learning and teaching applications. Usability testing is a central part of the human centered learning approach for developing sustainable STEM education from the socio-technological perspective. Our experiences with usability engineering and the impact of teaching low-cost rapid usability testing methods on knowledge translation from undergraduate to graduate courses to real-world practice (i.e. getting the methods out there in real use) are diverse and multi-modal. Our sample space has been hundreds of trained students who have learned how to do effective usability engineering in real-world situations at higher levels of realism (i.e. fidelity) and at a much lower cost than using traditional fixed usability labs. Furthermore, this low-cost rapid approach to usability engineering has been adopted by many of our graduates who are now managers, CIOs etc and who are using the methods routinely in their organizations in real world applications and scenarios. This knowledge has been used to improve design and implementation of a wide range of applications, including applications designed for teaching and learning.