Macrophonics II

Macrophonics II presents new Australian work emerging from the leading edge of performance interface research. The program addresses the emerging dialogue between traditional media and emerging digital media, as well as dialogues across a broad range of musical traditions. Recent technological developments are causing a complete reevaluation of the relationships between media and genres in art, and Macrophonics II presents a cross-section of responses to this situation. Works in the program foreground an approach to performance that integrates sensors with novel performance control devices, and/or examine how machines can be made musical in performance. The program presents works by Australian artists Donna Hewitt, Julian Knowles and Wade Marynowsky, with choreography by Avril Huddy and dance performance by Lizzie and Zaimon Vilmanis. From sensor-based microphones and guitars, through performance a/v, to post-rock dronescapes, movement inspired works and experimental electronica, Macrophonics II provides a broad and engaging survey of new performance approaches in mediatised environments. Initial R&D for the work was supported by a range of institutions internationally, including the Australia Council for the Arts, Arts Queensland, STEIM (Holland) and the Nes Artist Residency (Iceland).

Using collaborative and activity-based learning for engaging IT students

Active and collaborative learning are becoming essential strategies to attract, engage and retain students. These methods have been adopted within the Science and Engineering Faculty of Queensland University of Technology for use in its Science, Information Technology and Engineering degrees. This paper describes the adoption and application of these techniques in a specific first year unit in a new Bachelor of Information Technology degree which has majors in Computer Science and Information Systems. The paper reports on the design, development and implementation of this foundation subject and discusses how it uses active and collaborative learning to teach design thinking through a series of design challenges, and how it uses critiquing and reflection to ensure that students become more aware of design and team processes.

Collaborative extension of biodiversity monitoring protocols in the bird watching community

Citizen science projects have demonstrated the advantages of people with limited relevant prior knowledge participating in research. However, there is a difference between engaging the general public in a scientific project and entering an established expert community to conduct research. This paper describes our ongoing acoustic biodiversity monitoring collaborations with the bird watching community. We report on findings gathered over six years from participation in bird walks, observing conservation efforts, and records of personal activities of experienced birders. We offer an empirical study into extending existing protocols through in-context collaborative design involving scientists and domain experts.

CubIT presentation and collaboration framework

Cubit is a public installation developed for QUT's Cube. It allows QUT staff and students to upload and exhibit media content on the Cube's display surfaces. Interact with the work of QUT's Science, Technology, Engineering and Mathematics (STEM) research projects with CubIT, a unique system at the Cube that allows the general public to collaborate with and access research content shared by QUT's students and academics. QUT students and staff can easily present and share their work at The Cube on a set of large multi-touch displays. To access The Cube, all they need to do is swipe their staff or student card at the CubIT system. They will then be able to instantly upload presentations, videos or visualisation of their work. CubIT boasts a host of collaborative features that allows users to share content across user accounts, annotate content and create shared presentations. Interactive features allow the public to engage and collaborate with content hands-on. In addition to being accessible through The Cube, CubIT allows users to interact with their work through alternative mediums and devices, including mobile phones, tablets and Dropbox. Please note you must be on the QUT network to access CubIT. CubIT can be booked to appear on the Cube Level 5 at specfic times for student and staff purposes. Please email booking requests

Enhancing social work interprofessional learning through across university and industry collaboration : early steps in the Advanced Health Directives Project

There is ongoing interest in strategies for enhancing the reciprocal benefit derived from social work placements by students, host agencies, and universities. There is also recognition that interprofessional learning is an important aspect of social work education,and that field education placements have a role to play in this learning. This article reports on an innovation in community-engaged learning undertaken between a major public hospital and a university, where a team of social work and law students contributed to a focused inquiry into a socio-legal practice challenge faced by the hospital, namely the use of Advanced Health Directives (AHDs).Various collaborative processes involved in the early phase of the AHD project are reflected on by participants.A preliminary evaluation supports the value of taking a systematic approach to university–industry engagement where interprofessional collaboration occurs vertically and horizontally within and across university and placement hosting agencies.

Facilitators of expanded and extended scope of paramedic practice - what makes them work?

Introduction Better integration of health services and redefinition of health workforce roles through expanding and extending traditional scope of clinical practice have been explored nationally and internationally. This paper aims to extend our earlier work by examining models of expanded and extended scope of paramedic practice for attributes which facilitate such a practice. Methods An exploratory multi-case study analysis of Australia, New Zealand, Canada and the United Kingdom expanded and extended paramedic practices were analysed. Results Successful models of advanced practice harness the capacity and personality of the paramedic practitioner, and are supported by enabling infrastructures, specifically: professional development/ education; clinical guideline and policy (boundary); access to physical infrastructure and clinical support from senior medical practitioners; and, ability to directly refer to other health services (service integration). The scope of advanced practice is however influenced by individual employers’ capacity, perceived needs and preference/ prioritises. The potential for advanced paramedic practice is equally applicable to urban as well as rural Australia. The Council of Ambulance Authorities’ Professional Competency Standard provides the form and functions for building on advanced paramedic practice. Recognition of such advanced paramedic practice provides a structure for professional growth, process for career progression and will support workforce retention. Conclusion The achievement of advanced knowledge and skills has positioned the paramedic profession to be recognized as a valuable clinician. The Council of Ambulance Authorities’ Professional Competency Standards provides the form and function for supporting advanced paramedic practice.

Permissionary work

The Los Angeles-based collaborative duo responds to the community-focused mission of the Center for the Arts Eagle Rock by asking themselves what kinds of invitations they want to extend to others publicly and privately. The resulting works depict various attempts at engagement and include examples that are insider, narcissistic, exclusive, inclusive, and imaginary. This new body of work furthers CamLab’s ongoing investigation into intimacy and how the political becomes personal by making its existing networks palpable and by giving its potential networks form.

Advanced computer simulation of the milling process

Process modelling is an integral part of any process industry. Several sugar factory models have been developed over the years to simulate the unit operations. An enhanced and comprehensive milling process simulation model has been developed to analyse the performance of the milling train and to assess the impact of changes and advanced control options for improved operational efficiency. The developed model is incorporated in a proprietary software package ‘SysCAD’. As an example, the milling process model has been used to predict a significant loss of extraction by returning the cush from the juice screen before #3 mill instead of before #2 mill as is more commonly done. Further work is being undertaken to more accurately model extraction processes in a milling train, to examine extraction issues dynamically and to integrate the model into a whole factory model.

Synthesis, characterization and activity of an immobilized photocatalyst : natural porous diatomite supported titania nanoparticles

Diatomite, a porous non-metal mineral, was used as support to prepare TiO2/diatomite composites by a modified sol–gel method. The as-prepared composites were calcined at temperatures ranging from 450 to 950 _C. The characterization tests included X-ray powder diffraction (XRD), scanning electron microscopy (SEM) with an energy-dispersive X-ray spectrometer (EDS), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption/desorption measurements. The XRD analysis indicated that the binary mixtures of anatase and rutile exist in the composites. The morphology analysis confirmed the TiO2 particles were uniformly immobilized on the surface of diatom with a strong interfacial anchoring strength, which leads to few drain of photocatalytic components during practical applications. In further XPS studies of hybrid catalyst, we found the evidence of the presence of Ti–O–Si bond and increased percentage of surface hydroxyl. In addition, the adsorption capacity and photocatalytic activity of synthesized TiO2/diatomite composites were evaluated by studying the degradation kinetics of aqueous Rhodamine B under UV-light irradiation. The photocatalytic degradation was found to follow pseudo-first order kinetics according to the Langmuir–Hinshelwood model. The preferable removal efficiency was observed in composites by 750 _C calcination, which is attributed to a relatively appropriate anatase/rutile mixing ratio of 90/10.

The effect of work-integrated learning in highlighting the complexity of work : a pilot study of work self-efficacy

This pilot study aims to examine the effect of work-integrated learning (WIL) on work self-efficacy (WSE) for undergraduate students from the Queensland University of Technology. A WSE instrument was used to examine the seven subscales of WSE. These were; learning, problem solving, pressure, role expectations, team work, sensitivity and work politics. The results of this pilot study revealed that, overall the WSE scores were highest when the students’ did not participate in the WIL unit (comparison group) in comparison to the WIL group. The current paper suggests that WSE scores were changed as a result of WIL participation. These findings open a new path for future studies allowing them to explore the relationship between WIL and the specific subscales of WSE.

Teaching peer review reflective processes in accounting

A well designed peer review process in higher education subjects can lead to more confident and reflective learners who become skilled at making independent judgements of their own and others’ work; essential requirements for successful lifelong learning. The challenge for educators is to ensure their students gain these important graduate attributes within the constraints of a range of internal and external tensions currently facing higher education systems, including, respectively, the realities of large undergraduate Accounting subjects, culturally diverse and time-poor academics and students, and increased calls for public accountability of the Higher Education sector by groups such as the OECD. Innovative curriculum and assessment design and collaborative technologies have the capacity to simultaneously provide some measure of relief from these internal and external tensions and to position students as responsible partners in their own learning. This chapter reports on a two phase implementation of an online peer review process as part of the assessment in a large, under-graduate, International Accounting class. Phase One did not include explicit reflective strategies within the process, and anonymous and voluntary student views served to clearly highlight that students were ‘confused’ and ‘hesitant’ about moving away from their own ideas; often mistrusting the conflicting advice received from multiple peer reviewers. A significant number of students also felt that they did not have the skills to constructively review the work of their peers. Phase Two consequently utilised the combined power of e-Technology, peer review feedback and carefully scaffolded and supported reflective practices from Ryan and Ryan’s Teaching and Assessing Reflective Learning (TARL) model (see Chap. 2). Students found the reflective skills support workshop introduced in Phase Two to be highly useful in maximising the benefits of the peer review process, with 83 % reporting it supported them in writing peer reviews, while 90 % of the respondents reporting the workshop supported them in utilising peer and staff feedback.

Designing for collaborative learning spaces : an academic staff development pilot program

To prepare for the delivery of new Bachelor of Science units in collaborative learning spaces, academic and professional staff at Queensland University of Technology piloted an academic development program over the period of a semester. The program was informed by Rogers’ theory of innovation and diffusion (2003) and structured according to Wilson’s framework for faculty development (2007). Through a series of workshops and group mentoring activities, the program modelled inquiry-based learning in a collaborative learning space, and the participants designed and practiced the delivery of teaching activities. This paper provides a preliminary evaluation of the effectiveness of the pilot based on survey responses from participants, notes from the development team who coordinated the program and audience feedback from the final showcase session. The design and structure of the program is discussed as well as possible future directions.

Collaborative learning in the rural Indonesian craft industry

The research explores the potential for participatory and collaborative approaches in working with the Indonesian glass-bead rural craft industry, which currently struggles to sustain its business. Contextual inquiry and participatory action research were used to understand the local context, including motivations, barriers and opportunities and to collaboratively develop strategies for advancement and innovation. The study documents participatory design projects undertaken to make, sell and promote hedonic products. It identifies the importance of understanding local context and individual craftsperson aspirations in designing collaborative support programs. It also provides an in depth insight into the Indonesian rural craft industry.

Sustainability Non-Price Incentives and Rewards: A Collaborative Procurement Perspective

Construction scholars suggest that procurement processes can be used as mechanisms to change construction industry practices. This paper discusses industry changes as a response to the calls for integration of sustainability ideals into construction practices. Because major infrastructure construction has been identified as a key producer of greenhouse gas emissions (GHGE), this study explores collaborative procurement models that have been used to facilitate mitigation of GHGE. The study focuses on the application of non-price incentives and rewards that work together as a binary mechanism. Data were collected using mixed-methods: government document content analysis was complemented with data collected through focus groups and individual interviews with both clients and contractors. This report includes examples of greening procurement agendas for three Australian road authorities relating to collaborative procurement project delivery models. Three collaborative procurement models, Alliance Consortium, Early Contractor Involvement and Public Private Partnerships provide evidence of construction projects that were completed early. It can also be argued that both clients and contractors are rewarded through collaborative project delivery. The incentive of early completion is rewarded with reduction of GHGE. This positive environmental outcome, based on a dual benefit and non-price sustainability criteria, suggests a step towards changed industry practices though the use of green procurement models.

An SECM study on the influence of cationic, membrane-active peptides on a gold-supported self-assembled monolayer

The influence of the membrane active peptides, Tat44–57 (activator in HIV-1) and melittin (active content of bee venom), on self-assembled monolayers of 6-mercaptohexanoic acid (MHA) on gold electrodes has been studied with scanning electrochemical microscopy (SECM). It was found that MHA, when deprotonated at physiological pH, significantly affected the relative rates of electron transfer between the [Fe(CN)6]4− solution based mediator and the underlying gold electrode, predominantly by the electrostatic interaction between the mediator and MHA. Upon the introduction of Tat44–57 ormelittin to the electrolyte, the relative rate of electron transfer through the MHA layer could be increased or decreased depending on the mediator used. However, in all cases it was found that these peptides have the ability to be incorporated into synthetic SAMs, which has implications for future electrochemical studies carried out using cell mimicking membranes immobilised on such layers.