Effects of small field output factors on IMRT optimisation and dose calculation

Introduction Given the known challenges of obtaining accurate measurements of small radiation fields, and the increasing use of small field segments in IMRT beams, this study examined the possible effects of referencing inaccurate field output factors in the planning of IMRT treatments. Methods This study used the Brainlab iPlan treatment planning system to devise IMRT treatment plans for delivery using the Brainlab m3 microMLC (Brainlab, Feldkirchen, Germany). Four pairs of sample IMRT treatments were planned using volumes, beams and prescriptions that were based on a set of test plans described in AAPM TG 119’s recommendations for the commissioning of IMRT treatment planning systems [1]: • C1, a set of three 4 cm volumes with different prescription doses, was modified to reduce the size of the PTV to 2 cm across and to include an OAR dose constraint for one of the other volumes. • C2, a prostate treatment, was planned as described by the TG 119 report [1]. • C3, a head-and-neck treatment with a PTV larger than 10 cm across, was excluded from the study. • C4, an 8 cm long C-shaped PTV surrounding a cylindrical OAR, was planned as described in the TG 119 report [1] and then replanned with the length of the PTV reduced to 4 cm. Both plans in each pair used the same beam angles, collimator angles, dose reference points, prescriptions and constraints. However, one of each pair of plans had its beam modulation optimisation and dose calculation completed with reference to existing iPlan beam data and the other had its beam modulation optimisation and dose calculation completed with reference to revised beam data. The beam data revisions consisted of increasing the field output factor for a 0.6 9 0.6 cm2 field by 17 % and increasing the field output factor for a 1.2 9 1.2 cm2 field by 3 %. Results The use of different beam data resulted in different optimisation results with different microMLC apertures and segment weightings between the two plans for each treatment, which led to large differences (up to 30 % with an average of 5 %) between reference point doses in each pair of plans. These point dose differences are more indicative of the modulation of the plans than of any clinically relevant changes to the overall PTV or OAR doses. By contrast, the maximum, minimum and mean doses to the PTVs and OARs were smaller (less than 1 %, for all beams in three out of four pairs of treatment plans) but are more clinically important. Of the four test cases, only the shortened (4 cm) version of TG 119’s C4 plan showed substantial differences between the overall doses calculated in the volumes of interest using the different sets of beam data and thereby suggested that treatment doses could be affected by changes to small field output factors. An analysis of the complexity of this pair of plans, using Crowe et al.’s TADA code [2], indicated that iPlan’s optimiser had produced IMRT segments comprised of larger numbers of small microMLC leaf separations than in the other three test cases. Conclusion: The use of altered small field output factors can result in substantially altered doses when large numbers of small leaf apertures are used to modulate the beams, even when treating relatively large volumes.

Monte Carlo dosimetry for stereotactic radiosurgery

Stereotactic radiosurgery (SRS) treatments for brain cancers require small and precisely shaped photon beams. These beams can be generated by fitting a linear accelerator with a micro-multileaf collimator (mMLC) such as the BrainLAB m3, which offers greater flexibility for field shaping than standard SRS cone collimators

The culture of the digital : Pinterest and digital sociology

As the boundaries between public and private, human and technology, digital and social, mediated and natural, online and offline become increasingly blurred in modern techno-social hybrid societies, sociology as a discipline needs to adapt and adopt new ways of accounting for these digital cultures. In this paper I use the social networking site Pinterest to demonstrate how people today are shaped by, and in turn shape, the digital tools they are assembled with. Digital sociology is emerging as a sociological subdiscipline that engages with the convergence of the digital and the social. However, there seems to be a focus on developing new methods for studying digital social life, yet a neglect of concrete explorations of its culture. I argue for the need for critical socio-cultural ‘thick description’ to account for the interrelations between humans and technologies in modern digitally mediated cultures.

Towards a global framework for advertising self regulation

One of the forces which has indelibly shaped marketing is the internet. It has not only changed the way we communicate, but our marketing practices and our advertising self-regulation process (Kerr, Mortimer, Dickinson and Waller 2012). This special session seeks to build a new global framework to regulate advertising activity in this uncharted online environment. It looks back to how advertising has been traditionally self-regulated and looks forward to identify the key issues for marketers, consumers, regulators and the media. This special session explores and reinforces the fundamental purpose of the conference, as well as addressing the urgent needs of marketers, consumers and regulators.

Intrinsics and dynamics of fat grafts : an in vitro study

Background Despite a revived interest in fat grafting procedures, clinicians still fail to demonstrate clearly the in vivo behavior of fat grafts as a dynamic tissue substitute. However, the basic principles in cellular biology teach us that cells can survive and develop, provided that a structural matrix exists that directs their behavior. The purpose of this in vitro study was to analyze that behavior of crude fat grafts, cultured on a three-dimensional laminin-rich matrix. Methods Nonprocessed, human fat biopsy specimens (approximately 1 mm) were inoculated on Matrigel-coated wells to which culture medium was added. The control group consisted of fat biopsy specimens embedded in medium alone. The cellular proliferation pattern was followed over 6 weeks. Additional cultures of primary generated cellular spheroids were performed and eventually subjected to adipogenic differentiation media. Results A progressive outgrowth of fibroblast-like cells from the core fat biopsy specimen was observed in both groups. Within the Matrigel group, an interconnecting three-dimensional network of spindle-shaped cells was established. This new cell colony reproduced spheroids that functioned again as solitary sources of cellular proliferation. Addition of differentiation media resulted in lipid droplet deposition in the majority of generated cells, indicating the initial steps of adipogenic differentiation. Conclusions The authors noticed that crude, nonprocessed fat biopsy specimens do have considerable potential for future tissue engineering-based applications, provided that the basic principles of developmental, cellular biology are respected. Spontaneous in vitro expansion of the stromal cells present in fat grafts within autologous and injectable matrices could create "off-the-shelf" therapies for reconstructive procedures.

Blind Collaboration

This paper examines the creation, development and implementation of an artistic process termed by the author ‘Blind Collaboration’. The process involves musicians collaborating on an album of contemporary music where they, the collaborators, do not see or hear each other nor record in the same studio at the same time as their fellow musicians. The notion of musicians recording separately or indeed remotely is not new, however what is new is the ‘blind’ aspect of the process. Each musician is completely unaware of any others’ contributions, and is therefore uninfluenced by what the others might play. None of the musicians hears the overall result until the final mix. The principal focus of this case study lies in the analysis of specific aspects and outcomes of the creative/artistic process - how it evolved, how it was managed, how it was influenced by the particular artists involved and how the Blind Collaboration process ultimately shaped the final musical work.

Mining and (sustainable) local communities : transforming Ravensthorpe, Western Australia

This chapter examines local community experiences, understandings and changes attending the presence of mining activity, in particular as occurred in the Shire of Ravensthorpe in the South West of Western Australia (WA). It does so by drawing on an extensive ethnographic study spanning the development, opening, and closure of BHP Billiton’s Ravensthorpe Nickel Operation (RNO). Given that the negative consequences of mining activity are most evident and complex at the local level, it is crucial that we understand and address how communities (and the individuals and families who are both part of and are shaped by communities) experience the impacts of mining. Though difficult to measure, social and cultural dimensions of mining at the local scale, as this chapter demonstrates, are central to our understanding of mining as a curse or cure.

Time pressure and coworker support mediate the curvilinear relationship between age and occupational well-being

As the proportion of older employees in the workforce is growing, researchers have become increasingly interested in the association between age and occupational well-being. The curvilinear nature of relationships between age and job satisfaction and between age and emotional exhaustion is well-established in the literature, with employees in their late 20s to early 40s generally reporting lower levels of occupational well-being than younger and older employees. However, the mechanisms underlying these curvilinear relationships are so far not well understood due to a lack of studies testing mediation effects. Based on an integration of role theory and research from the adult development and career literatures, this study examined time pressure, work–home conflict, and coworker support as mediators of the relationships between age and job satisfaction and between age and emotional exhaustion. Data came from 771 employees between 17 and 74 years of age in the construction industry. Results showed that employees in their late 20s to early 40s had lower job satisfaction and higher emotional exhaustion than younger and older employees. Time pressure and coworker support fully mediated both the U-shaped relationship between age and job satisfaction and the inversely U-shaped relationship between age and emotional exhaustion. These findings suggest that organizational interventions may help increase the relatively low levels of occupational well-being in certain age groups.

Legitimising Rejection : International Refugee Law in Southeast Asia

The 1951 Convention Relating to the Status of Refugees and the 1967 Protocol Relating to the Status of Refugees are the two primary international legal instruments that states use to process asylum seekers' claim to refugee status. However, in Southeast Asia only two states have acceded to these instruments. This is seemingly paradoxical for a region that has been host to a large number of asylum seekers who, as a result, are forced to live as ‘illegal migrants’. This book examines the region's continued rejection of international refugee law through extensive archival analysis and argues that this rejection was shaped by the region’s response to its largest refugee crisis in the post-1945 era: the Indochinese refugee crisis from 1975 to 1996. The result is a seminal study into Southeast Asian's relationship with international refugee law and the impact that this has had on states surrounding the region, the UNHCR and the asylum seekers themselves.

The effect of the histological properties of tumors on transfection efficiency of electrically assisted gene delivery to solid tumors in mice

Uniform DNA distribution in tumors is a prerequisite step for high transfection efficiency in solid tumors. To improve the transfection efficiency of electrically assisted gene delivery to solid tumors in vivo, we explored how tumor histological properties affected transfection efficiency. In four different tumor types (B16F1, EAT, SA-1 and LPB), proteoglycan and collagen content was morphometrically analyzed, and cell size and cell density were determined in paraffin-embedded tumor sections under a transmission microscope. To demonstrate the influence of the histological properties of solid tumors on electrically assisted gene delivery, the correlation between histological properties and transfection efficiency with regard to the time interval between DNA injection and electroporation was determined. Our data demonstrate that soft tumors with larger spherical cells, low proteoglycan and collagen content, and low cell density are more effectively transfected (B16F1 and EAT) than rigid tumors with high proteoglycan and collagen content, small spindle-shaped cells and high cell density (LPB and SA-1). Furthermore, an optimal time interval for increased transfection exists only in soft tumors, this being in the range of 5-15 min. Therefore, knowledge about the histology of tumors is important in planning electrogene therapy with respect to the time interval between DNA injection and electroporation.

Monoclinic β-MoO3 nanosheets produced by atmospheric microplasma : application to lithium-ion batteries

Porous high surface area thin films of nanosheet-shaped monoclinic MoO 3 were deposited onto platinized Si substrates using patch antenna-based atmospheric microplasma processing. The films were characterized by high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) and electrochemical analysis. The electrochemical analysis shows original redox peaks and high charge capacity, and also indicates a reversible electrochemical behaviour particularly beneficial for applications in Li-ion batteries. SEM shows that the films are highly porous and consist of nanosheets 50-100 nm thick with surface dimensions in the micrometre range. HRTEM reveals that the MoO3 nanosheets consist of the monoclinic beta phase of MoO3. These intricate nanoarchitectures made of monoclinic MoO3 nanosheets have not been studied previously in the context of applications in Li-ion batteries and show superior structural and morphological features that enable effective insertion of Li ions.

Effect of pupil dilation and constriction on the distribution of bit errors within the iris

Texture information in the iris image is not uniform in discriminatory information content for biometric identity verification. The bits in an iris code obtained from the image differ in their consistency from one sample to another for the same identity. In this work, errors in bit strings are systematically analysed in order to investigate the effect of light-induced and drug-induced pupil dilation and constriction on the consistency of iris texture information. The statistics of bit errors are computed for client and impostor distributions as functions of radius and angle. Under normal conditions, a V-shaped radial trend of decreasing bit errors towards the central region of the iris is obtained for client matching, and it is observed that the distribution of errors as a function of angle is uniform. When iris images are affected by pupil dilation or constriction the radial distribution of bit errors is altered. A decreasing trend from the pupil outwards is observed for constriction, whereas a more uniform trend is observed for dilation. The main increase in bit errors occurs closer to the pupil in both cases.

Evaluation of resonant damping techniques for Z-source current-type inverter

For the renewable energy sources whose outputs vary continuously, a Z-source current-type inverter has been proposed as a possible buck-boost alternative for grid-interfacing. With a unique X-shaped LC network connected between its dc power source and inverter topology, Z-source current-type inverter is however expected to suffer from compounded resonant complications in addition to those associated with its second-order output filter. To improve its damping performance, this paper proposes the careful integration of Posicast or three-step compensators before the inverter pulse-width modulator for damping triggered resonant oscillations. In total, two compensators are needed for wave-shaping the inverter boost factor and modulation ratio, and they can conveniently be implemented using first-in first-out stacks and embedded timers of modern digital signal processors widely used in motion control applications. Both techniques are found to damp resonance of ac filter well, but for cases of transiting from current-buck to boost state, three-step technique is less effective due to the sudden intermediate discharging interval introduced by its non-monotonic stepping (unlike the monotonic stepping of Posicast damping). These findings have been confirmed both in simulations and experiments using an implemented laboratory prototype.

Before and after the creative city : the politics of urban cultural policy in Austin, Texas

This article examines the politics and practice of urban cultural policy in Austin, Texas. I demonstrate how aspects of the local context frame how local government and cultural sector interests strive to initiate the direction of policy. While larger trends—such as Richard Florida's creative city thesis—influence cultural policy and planning, specific contextual factors including prior economic development and growth management policy, departmental organization, the forum for interaction between municipal actors and non-governmental coalitions, and the character of the city's cultural economy mediate such trends to produce policy outcomes. As this case shows, contemporary urban cultural policy is not simply due to the rise of the creative city discourse, but is an evolving product of past policy structures and shaped by local institutions and actors.

Changes in teachers’ behaviour in secondary science education : implementing a standards-referenced national curriculum

There is substantial attention worldwide to the quality of secondary school teaching in STEM in Education. This paper reports on the use of Outcome Mapping (OM) as an approach to guide and monitor change in teacher practice and a visual tool, shaped as a Star, to benchmark and monitor this behaviour. OM and the visual tool were employed to guide and document three secondary teachers’ behaviour as they planned, implemented and assessed a science unit in the new Australian standards-referenced curriculum. Five key outcome markers in the teachers’ behaviour were identified together with progress markers — cumulative qualitative indicators — leading to these outcomes. The use of a Star to benchmark and track teachers’ behaviours was particularly useful because it showed teacher behaviour on multiple dimensions simultaneously at various points in time. It also highlighted priorities in need of further attention and provided a pathway to achievement. Hence, OM and the Star representation provide both theoretical and pragmatic approaches to enhancing quality in STEM teaching.