Motion capture and the future of virtual production

Motion capture continues to be adopted across a range of creative fields including, animation, games, visual effects, dance, live theatre and the visual arts. This panel will discuss and showcase the use of motion capture across these creative fields and consider the future of virtual production in the creative industries.

Automated aerial inspection guidance with improved turn planning

Aerial inspection of pipelines, powerlines, and other large linear infrastructure networks has emerged in a number of civilian remote sensing applications. Challenges relate to automating inspection flight for under-actuated aircraft with LiDAR/camera sensor constraints whilst subjected to wind disturbances. This paper presents new improved turn planning strategies with guidance suitable for automation of linear infrastructure inspection able to reduce inspection flight distance by including wind information. Simulation and experimental flight tests confirmed the flight distance saving, and the proposed guidance strategies exhibited good tracking performance in a range of wind conditions.

Control of infrastructure inspection aircraft vertical dynamics in the presence of thermal disturbances

The low-altitude aircraft inspection of powerlines, or other linear infrastructure networks, is emerging as an important application requiring specialised control technologies. Despite some recent advances in automated control related to this application, control of the underactuated aircraft vertical dynamics has not been completely achieved, especially in the presence of thermal disturbances. Rejection of thermal disturbances represents a key challenge to the control of inspection aircraft due to the underactuated nature of the dynamics and specified speed, altitude, and pitch constraints. This paper proposes a new vertical controller consisting of a backstepping elevator controller with feedforward-feedback throttle controller. The performance of our proposed approach is evaluated against two existing candidate controllers.

Closing the gap between copyright and designs : an age of enlightnement or state of confusion?

The arena of intellectual property encompasses streams that often interrelate and overlap in protecting different aspects of intellectual property. Australian commentators suggest that ‘one of the most troublesome areas in the entire field of intellectual property has been the relationship between copyright protection for artistic works under the Copyright Act 1968 (Cth) and protection for registered designs under the Designs Act 1906 (Cth).’ [McKeough, J., Stewart, A., & Griffith, P. (2004). Intellectual property in Australia (3rd ed.). Chatswood, NSW: Butterworths.] [Ricketson, S., Richardson, M., & Davison, M. (2009). Intellectual property: Cases, materials and commentary (4th ed.). Chatswood, NSW: LexisNexis Butterworths.] This overlap has caused much confusion for both creators of artistic works and industrial designs, as there is an uncertainty of whether protection against infringement is afforded under the Copyright Act 1988 (Cth) or whether the Designs Act 2003 (Cth) will apply. In Australia, there is limited precedent that examines the crossover between copyright and designs. Essentially, the cases that have tested this issue remain unclear as to whether a design applied industrially will invoke copyright protection. The cases demonstrate that there is an inconsistency in this area despite the aims of the new provisions of the Designs Act 2003 (Cth) to close the loopholes between copyright and designs. This paper will discuss and evaluate the relationship between copyright protection for artistic works and protection for registered designs with respect to the Designs Act 2003 (Cth).

Ergonomic DHM systems - limitations and trends – a systematic literature review focused on the ‘future of ergonomics’

Digital Human Models (DHM) have been used for over 25 years. They have evolved from simple drawing templates, which are nowadays still used in architecture, to complex and Computer Aided Engineering (CAE) integrated design and analysis tools for various ergonomic tasks. DHM are most frequently used for applications in product design and production planning, with many successful implementations documented. DHM from other domains, as for example computer user interfaces, artificial intelligence, training and education, or the entertainment industry show that there is also an ongoing development towards a comprehensive understanding and holistic modeling of human behavior. While the development of DHM for the game sector has seen significant progress in recent years, advances of DHM in the area of ergonomics have been comparatively modest. As a consequence, we need to question if current DHM systems are fit for the design of future mobile work systems. So far it appears that DHM in Ergonomics are rather limited to some traditional applications. According to Dul et al. (2012), future characteristics of Human Factors and Ergonomics (HFE) can be assigned to six main trends: (1) global change of work systems, (2) cultural diversity, (3) ageing, (4) information and communication technology (ICT), (5) enhanced competiveness and the need for innovation, and; (6) sustainability and corporate social responsibility. Based on a literature review, we systematically investigate the capabilities of current ergonomic DHM systems versus the ‘Future of Ergonomics’ requirements. It is found that DHMs already provide broad functionality in support of trends (1) and (2), and more limited options in regards to trend (3). Today’s DHM provide access to a broad range of national and international databases for correct differentiation and characterization of anthropometry for global populations. Some DHM explicitly address social and cultural modeling of groups of people. In comparison, the trends of growing importance of ICT (4), the need for innovation (5) and sustainability (6) are addressed primarily from a hardware-oriented and engineering perspective and not reflected in DHM. This reflects a persistent separation between hardware design (engineering) and software design (information technology) in the view of DHM – a disconnection which needs to be urgently overcome in the era of software defined user interfaces and mobile devices. The design of a mobile ICT-device is discussed to exemplify the need for a comprehensive future DHM solution. Designing such mobile devices requires an approach that includes organizational aspects as well as technical and cognitive ergonomics. Multiple interrelationships between the different aspects result in a challenging setting for future DHM. In conclusion, the ‘Future of Ergonomics’ pose particular challenges for DHM in regards to the design of mobile work systems, and moreover mobile information access.

Exchanging data between Digital Human Modelling systems : a review of data formats

Digital human modeling (DHM) systems underwent significant development within the last years. They achieved constantly growing importance in the field of ergonomic workplace design, product development, product usability, ergonomic research, ergonomic education, audiovisual marketing and the entertainment industry. They help to design ergonomic products as well as healthy and safe socio-technical work systems. In the domain of scientific DHM systems, no industry specific standard interfaces are defined which could facilitate the exchange of 3D solid body data, anthropometric data or motion data. The focus of this article is to provide an overview of requirements for a reliable data exchange between different DHM systems in order to identify suitable file formats. Examples from the literature are discussed in detail. Methods: As a first step a literature review is conducted on existing studies and file formats for exchanging data between different DHM systems. The found file formats can be structured into different categories: static 3D solid body data exchange, anthropometric data exchange, motion data exchange and comprehensive data exchange. Each file format is discussed and advantages as well as disadvantages for the DHM context are pointed out. Case studies are furthermore presented, which show first approaches to exchange data between DHM systems. Lessons learnt are shortly summarized. Results: A selection of suitable file formats for data exchange between DHM systems is determined from the literature review.

Autonomous forced landing system for light general aviation aircraft in unknown environments

This paper presents a system which enhances the capabilities of a light general aviation aircraft to land autonomously in case of an unscheduled event such as engine failure. The proposed system will not only increase the level of autonomy for the general aviation aircraft industry but also increase the level of dependability. Safe autonomous landing in case of an engine failure with a certain level of reliability is the primary focus of our work as both safety and reliability are attributes of dependability. The system is designed for a light general aviation aircraft but can be extended for dependable unmanned aircraft systems. The underlying system components are computationally efficient and provides continuous situation assessment in case of an emergency landing. The proposed system is undergoing an evaluation phase using an experimental platform (Cessna 172R) in real world scenarios.

Objectifying the Subjective : Assessment and Feedback in Creative Arts Studio Learning and Teaching

This paper examines the Assessment and Feedback aspects of Studio Teaching as Creative Arts pedagogy. Prompted by USQ’s newly offered Bachelor of Creative Arts (BCA), the author has developed an Assessment Matrix specifically designed to satisfy a number of imperatives, including: • ‘objectifying’ the subjective aspects of creative practice as assessable coursework/research • providing the means by which accurate, detailed, personalised and confidential feedback may be provided to students individually • providing consistent, accurate, meaningful assessment records for student, lecturer, and institution • ensuring consistency, continuity, and transparency of assessment processes and records to satisfy quality audits • minimising marking and assessment time, whilst maximising assessment integrity and depth • requiring only basic level skills and knowledge of a computer application already in common use (Microsoft Excel) • adaptability to a range of creative courses ‐ across disciplines This Assessment Matrix has been in development (and trialled) since January 2009.

Taxonomy and redescription of the Yellow-footed Antechinus, Antechinus flavipes (Waterhouse) (Marsupialia: Dasyuridae)

We provide a taxonomic redescription of the ubiquitous and variable dasyurid marsupial Yellow-footed Antechinus, Antechinus flavipes (Waterhouse), which comprises three currently recognized subspecies whose combined geographic distribution spans almost the length and breadth of Australia. A. flavipes leucogaster Gray is confined to south-west Western Australia; A. flavipes flavipes is distributed in south-eastern Australia across four states—South Australia, Victoria, New South Wales and Queensland; A. flavipes rubeculus Van Dyck is confined to the wet tropics of Queensland. A. flavipes is readily distinguished from all extant congeners based on external morphology by the following combination of features: a grey head; orange-yellow toned flanks/rump, feet and tail base; pale eye-rings and a darkened tail tip. A. flavipes skulls are stout, being broad at the level of the rear upper molars, have small palatal vacuities and small entoconid cusps on the lower molars. However, notable differences among subspecies of A. flavipesprevent any obvious collection of skull characters being diagnostic for species-level discrimination among congeners. A. flavipes rubeculus is the largest of the three subspecies of Yellow-footed Antechinus and most similar in skull morphology to A. leo, A. bellus and A. godmani—all four species are geographically limited to tropical Australia. A. f. rubeculus is notably larger in many characters than its conspecifics: A. f. flavipes, the next largest, and A. f. leucogaster, the smallest of the group. A. f. flavipes and A. f. leucogaster diverge significantly at only a few skull characters, and both subspecies have cranial morphological affinities with the recently discovered A. mysticus, most notably A. f. leucogaster. Phylogenies generated from mt- and nDNA data strongly support Antechinus flavipes as monophyletic with respect to other members of the genus; within A. flavipes, each of the three recognized subspecies form distinctive monophyletic clades.

Methodologies for measuring research impact for a new interdisciplinary institute

Interdisciplinary research is often funded by national government initiatives or large corporate sponsorship, and as such, demands periodic reporting on the use of those funds. For reasons of accountability, governance and communication to the tax payer, knowledge of the outcomes of the research need to be measured and understood. The interdisciplinary approach to research raises many challenges for impact reporting. This presentation will consider what are the best practice workflow models and methodologies.Novel methodologies that can be added to the usual metrics of academic publications include analysis of percentage share of total publications in a subject or keyword field, calculating most cited publication in a key phrase category, analysis of who has cited or reviewed the work, and benchmarking of this data against others in that same category. At QUT, interest in how collaborative networking is trending in a research theme has led to the creation of some useful co-authorship graphs that demonstrate the network positions of authors and the strength of their scientific collaborations within a group. The scale of international collaborations is also worth including in the assessment. However, despite all of the tools and techniques available, the most useful way a researcher can help themselves and the process is to set up and maintain their researcher identifier and profile.

Cyclic mechanical strain guides capillary-like morphology in vitro

Introduction Stretching of tissue stimulates angiogenesis but increased motion at a fracture site hinders revascularisation. In vitro studies have indicated that mechanical stimuli promote angiogenic responses in endothelial cells, but can either inhibit or enhance responses when applied directly to angiogenesis assays. We anticipated that cyclic tension applied during endothelial network assembly would increase vascular structure formation up to a certain threshold. Methods Fibroblast/HUVEC co-cultures were subjected to cyclic equibiaxial strain (1 Hz; 6 h/day; 7 days) using the FlexerCell FX-4000T system and limiting rings for simultaneous application of multiple strain magnitudes (0–13%). Cells were labelled using anti-PECAM-1, and image analysis provided measures of endothelial network length and numbers of junctions. Results Cyclic stretching had no significant effect on the total length of endothelial networks (P > 0.2) but resulted in a strain-dependent decrease in branching and localised alignments of endothelial structures, which were in turn aligned with the supporting fibroblastic construct. Conclusion The organisation of endothelial networks under cyclic strain is dominated by structural adaptation to the supporting construct. It may be that, in fracture healing, the formation and integrity of the granulation tissue and callus is ultimately critical in revascularisation and its failure under severe strain conditions.

Using NVivo as a research management tool : a case narrative

This paper presents an illustrative demonstration of the qualitative data analysis tool NVivo (version 2.0), as employed across a multi-method research design as a comprehensive tool in support of overall research management. The paper will be of interest to (a) novice researchers, as a reference in their research design efforts; (b) academics, involved in research training, where this narrative can be used as a rich teaching case and; potentially to (c) vendors, of similar software tools, who may identify potential new tool applications and valuable tool enhancements.

Diurnal variations in ocular aberrations of human eyes

Purpose: To investigate the diurnal variations in ocular wavefront aberrations over two consecutive days in young adult subjects. Materials and methods: Measurements of both lower-order (sphero-cylindrical refractive powers) and higher-order (3rd and 4th order aberration terms) ocular aberrations were collected for 30 young adult subjects at ten different times over two consecutive days using a Hartmann-Shack aberrometer. Fifteen subjects were myopic and 15 were emmetropic. Five sets of measurements were collected each day at approximately 3 hourly intervals, with the first measurement taken at ~9 am and the final measurement at ~9 pm. Results: Spherical equivalent refraction (p = 0.029) and spherical aberration (p = 0.043) were both found to undergo significant diurnal variation over the two measurement days. The spherical equivalent was typically found to be at a maximum (i.e. most hyperopic) at the morning measurement, with a small myopic shift of 0.37 ± 0.15 D observed over the course of the day. The mean spherical aberration of all subjects (0.038 ± 0.048 μm) was found to be positive during the day and gradually became more negative into the evening, with a mean amplitude of change of 0.036 ± 0.02 μm. None of the other considered sphero-cylindrical refractive power components or higher-order aberrations exhibited significant diurnal variation over the two days of the experiment (p>0.05). Except for the lower-order astigmatism at 90/180 deg (p = 0.040), there were no significant differences between myopes and emmetropes in the magnitude and timing of the observed diurnal variations (p>0.05). Conclusions: Significant diurnal variations in spherical equivalent and spherical aberration were consistently observed over two consecutive days of measurement. Research and clinical applications requiring precise refractive error and wavefront measurements should take these diurnal changes into account when interpreting wavefront data.

Supermarkets and private standards : unintended consequences of the audit ritual

Recent scholarship has considered the implications of the rise of voluntary private standards in food and the role of private actors in a rapidly evolving, de-facto ‘mandatory’ sphere of governance. Standards are an important element of this globalising private sphere, but are an element that has been relatively peripheral in analyses of power in agri-food systems. Sociological thought has countered orthodox views of standards as simple tools of measurement, instead understanding their function as a governance mechanism that transforms many things, and people, during processes of standardisation. In a case study of the Australian retail supermarket duopoly and the proprietary standards required for market access this paper foregrounds retailers as standard owners and their role in third-party auditing and certification. Interview data from primary research into Australia’s food standards captures the multifaceted role supermarkets play as standard-owners, who are found to impinge on the independence of third-party certification while enforcing rigorous audit practices. We show how standard owners, in attempting to standardize the audit process, generate tensions within certification practices in a unique example of ritualism around audit. In examining standards to understand power in contemporary food governance, it is shown that retailers are drawn beyond standard-setting into certification and enforcement, that is characterized by a web of institutions and actors whose power to influence outcomes is uneven.