502 resultados para Training Activities
Resumo:
Background: Currently in the Australian higher education sector higher productivity from allied health clinical education placements are a contested issue. This paper will report results of a study that investigated output changes associated with occupational therapy and nutrition/dietetics clinical education placements in Queensland, Australia. Supervisors’ and students’ time use during placements and how this changes for supervisors compared to when students are not present in the workplace is also presented. Methodology/Principal Findings: A cohort design was used with students from four Queensland universities, and their supervisors employed by Queensland Health. There was an increasing trend in the number of occasions of service delivered when the students were present, and a statistically significant increase in the daily mean length of occasions of service delivered during the placement compared to pre-placement levels. For project-based placements that were not directly involved in patient care, supervisors’ project activity time decreased during placements, with students undertaking considerably more time in project activities. Conclusions/Significance: A novel method for estimating productivity and time use changes during clinical education programs for allied health disciplines has been applied. During clinical education placements there was a net increase in outputs, suggesting supervisors engage in longer consultations with patients for the purpose of training students, while maintaining patient numbers. Other activities are reduced. This paper is the first time these data have been shown and form a good basis for future assessments of the economic impact of student placements for allied health disciplines.
Resumo:
A simulation-based training system for surgical wound debridement was developed and comprises a multimedia introduction, a surgical simulator (tutorial component), and an assessment component. The simulator includes two PCs, a haptic device, and mirrored display. Debridement is performed on a virtual leg model with a shallow laceration wound superimposed. Trainees are instructed to remove debris with forceps, scrub with a brush, and rinse with saline solution to maintain sterility. Research and development issues currently under investigation include tissue deformation models using mass-spring system and finite element methods; tissue cutting using a high-resolution volumetric mesh and dynamic topology; and accurate collision detection, cutting, and soft-body haptic rendering for two devices within the same haptic space.
Resumo:
Mastering Medical Terminology: Australia and New Zealand Workbook is the indispensable companion to Mastering Medical Terminology Textbook. Packed with a range of exercises and activities to accompany the main text, the Workbook provides an ideal resource for self-testing and revision in a fun, practical and accessible format, and forms a key part of the Mastering Medical Terminology suite of products which are all available for separate purchase enabling you to pick and choose the right package for your learning requirements. Featuring a variety of question types including crossword puzzles, anagrams, multiple-choice questions and label-the-diagram exercises, the Workbook uses entirely Australian spelling and aligns to the chapters of the main text. When used in combination with the main text and MedWords app, Mastering Medical Terminology: Australia and New Zealand Workbook will make the scholarship of medical terminology not only manageable, but fun!
Resumo:
The concept of being evidence based or evidence informed is widely acknowledged as an important component of decision-making. It is perhaps most universally referred to in medicine, however has extended into many other disciplines over the past decade, including public health. Evidence-based public health has been defined as the ‘conscientious, explicit and judicious use of current best evidence in making decisions about the care of communities and populations in the domain of health protection, disease prevention, health maintenance and improvement (health promotion)’.1 More recent literature favours the use of the term evidence informed over evidence based to acknowledge the varying influences on decisions in this complex field.2,3 Evidence-informed activities in any discipline require a specific set of skills in critical thinking. These skills include identifying the questions to be resolved, collecting relevant evidence, and assessing, synthesizing and distilling evidence in a way that can inform the set of activities to be undertaken as a result.
Resumo:
It is suggested that all psychologists gain basic training in the types of complementary and alternative therapies (CAT) their clients may be using. As psychology students are the next cohort of health professionals who will inform future initiatives in the field, it is important to first understand the factors which influence their decisions about CAT integration. Drawing on the Theory of Planned Behavior, we investigated the beliefs that differentiate between psychology students who are high or low on willingness to access training in CAT for future practice use. Psychology students (N = 106) completed a questionnaire assessing the likelihood of both positive and negative consequences of accessing training and utilizing CAT within a psychological practice, important others approval, and barriers preventing them from this integration behavior. Those students high compared to low on willingness more likely to endorse positive outcomes (e.g., offering a more holistic approach to therapy) of accessing CAT training for future practice use and to believe that important others (e.g., clients) would support this behavior. We identified important beliefs of student psychologists related to decisions about undertaking CAT training for future professional use and can inform educators and policy-makers about CAT training and integration in psychology practice.
Resumo:
Motorcycle trauma is a serious road safety issue in Queensland and throughout Australia. In 2009, Queensland Transport (later Transport and Main Roads or TMR) appointed CARRS-Q to provide a three-year program of Road Safety Research Services for Motorcycle Rider Safety. Funding for this research originated from the Motor Accident Insurance Commission. This program of research was undertaken to produce knowledge to assist TMR to improve motorcycle safety by further strengthening the licensing and training system to make learner riders safer by developing a pre-learner package (Deliverable 1), and by evaluating the QRide CAP program to ensure that it is maximally effective and contributes to the best possible training for new riders (Deliverable 2). The focus of this report is Deliverable 3 of the overall program of research. It identifies potential new licensing components that will reduce the incidence of risky riding and improve higher-order cognitive skills in new riders.
Resumo:
Craft practitioners and designers have been involved in the production of civic art commissions for many centuries, either as recognised art workers or anonymous artisans. However, it has only been in the last couple of decades that Australia has formally acknowledged the role of public art through the development of government policy and professional accredited training
Resumo:
Background: Historically rail organisations have been operating in silos and devising their own training agendas. However with the harmonisation of the Australian workplace health and safety legislation and the appointment of a national rail safety regulator in 2013, rail incident investigator experts are exploring the possibility of developing a unified approach to investigator training. Objectives: The Australian CRC for Rail Innovation commissioned a training needs analysis to identify if common training needs existed between organisations and to assess support for the development of a national competency framework for rail incident investigations. Method: Fifty-two industry experts were consulted to explore the possibility of the development of a standardised training framework. These experts were sourced from within 19 Australasian organisations, comprising Rail Operators and Regulators in Queensland, New South Wales, Victoria, Western Australia, South Australia and New Zealand. Results: Although some competency requirements appear to be organisation specific, the vast majority of reported training requirements were generic across the Australasian rail operators and regulators. Industry experts consistently reported strong support for the development of a national training framework. Significance: The identification of both generic training requirements across organisations and strong support for standardised training indicates that the rail industry is receptive to the development of a structured training framework. The development of an Australasian learning framework could: increase efficiency in course development and reduce costs; establish recognised career pathways; and facilitate consistency with regards to investigator training.
Resumo:
Summary Background The final phase of a three phase study analysing the implementation and impact of the nurse practitioner role in Australia (the Australian Nurse Practitioner Project or AUSPRAC) was undertaken in 2009, requiring nurse telephone interviewers to gather information about health outcomes directly from patients and their treating nurse practitioners. A team of several registered nurses was recruited and trained as telephone interviewers. The aim of this paper is to report on development and evaluation of the training process for telephone interviewers. Methods The training process involved planning the content and methods to be used in the training session; delivering the session; testing skills and understanding of interviewers post-training; collecting and analysing data to determine the degree to which the training process was successful in meeting objectives and post-training follow-up. All aspects of the training process were informed by established educational principles. Results Interrater reliability between interviewers was high for well-validated sections of the survey instrument resulting in 100% agreement between interviewers. Other sections with unvalidated questions showed lower agreement (between 75% and 90%). Overall the agreement between interviewers was 92%. Each interviewer was also measured against a specifically developed master script or gold standard and for this each interviewer achieved a percentage of correct answers of 94.7% or better. This equated to a Kappa value of 0.92 or better. Conclusion The telephone interviewer training process was very effective and achieved high interrater reliability. We argue that the high reliability was due to the use of well validated instruments and the carefully planned programme based on established educational principles. There is limited published literature on how to successfully operationalise educational principles and tailor them for specific research studies; this report addresses this knowledge gap.
Resumo:
The rapid increase in the deployment of CCTV systems has led to a greater demand for algorithms that are able to process incoming video feeds. These algorithms are designed to extract information of interest for human operators. During the past several years, there has been a large effort to detect abnormal activities through computer vision techniques. Typically, the problem is formulated as a novelty detection task where the system is trained on normal data and is required to detect events which do not fit the learned `normal' model. Many researchers have tried various sets of features to train different learning models to detect abnormal behaviour in video footage. In this work we propose using a Semi-2D Hidden Markov Model (HMM) to model the normal activities of people. The outliers of the model with insufficient likelihood are identified as abnormal activities. Our Semi-2D HMM is designed to model both the temporal and spatial causalities of the crowd behaviour by assuming the current state of the Hidden Markov Model depends not only on the previous state in the temporal direction, but also on the previous states of the adjacent spatial locations. Two different HMMs are trained to model both the vertical and horizontal spatial causal information. Location features, flow features and optical flow textures are used as the features for the model. The proposed approach is evaluated using the publicly available UCSD datasets and we demonstrate improved performance compared to other state of the art methods.
Resumo:
A core component for the prevention of re-occurring incidents within the rail industry is rail safety investigations. Within the current Australasian rail industry, the nature of incident investigations varies considerably between organisations. As it stands, most of the investigations are conducted by the various State Rail Operators and Regulators, with the more major investigations in Australia being conducted or overseen by the Australian Transport Safety Bureau (ATSB). Because of the varying nature of these investigations, the current training methods for rail incident investigators also vary widely. While there are several commonly accepted training courses available to investigators in Australasia, none appear to offer the breadth of development needed for a comprehensive pathway. Furthermore, it appears that no single training course covers the entire breadth of competencies required by the industry. These courses range in duration between a few days to several years, and some were run in-house while others are run by external consultants or registered training organisations. Through consultations with rail operators and regulators in Australasia, this paper will identify capabilities required for rail incident investigation and explore the current training options available for rail incident investigators.
Resumo:
This article outlines the integration of robotics in two settings in a primary school. This initiative was part of an Australian Research Council project which was undertaken at this school. The article highlights how robotics was integrated in a technology unit in a year four class. It also explains how it was embedded into an after-school program which catered for students from years five to seven. From these experiences further possibilities of engaging with robotics are also discussed.
Resumo:
This paper reports on a four year Australian Research Council funded Linkage Project titled Skilling Indigenous Queensland, conducted in regional areas of Queensland, Australia from 2009 to 2013. The project sought to investigate vocational education, training (VET) and teaching, Indigenous learners’ needs, employer cultural and expectations and community culture and expectations to identify best practice in numeracy teaching for Indigenous VET learners. Specifically it focused on ways to enhance the teaching and learning of courses and the associated mathematics in such courses to benefit learners and increase their future opportunities of employment. To date thirty-nine teachers/trainers/teacher aides and two hundred and thirty-one students consented to participate in the project. Nine VET courses were nominated to be the focus on the study. This paper focuses on questionnaire and interview responses from four trainers, two teacher aides and six students. In recent years a considerable amount of funding has been allocated to increasing Indigenous Peoples’ participation in education and employment. This increased funding is predicated on the assumption that it will make a difference and contribute to closing the education gap between Indigenous and non-Indigenous Australians (Council of Australia Governments, 2009). The central tenet is that access to education for Indigenous People will create substantial social and economic benefits for regional and remote Indigenous People. The project’s aim is to address some of the issues associated with the gap. To achieve the aims, the project adopted a mixed methods design aimed at benefitting research participants and included: participatory collaborative action research (Kemmis & McTaggart, 1988) and, community research (Smith, 1999). Participatory collaborative action research refers to a is a “collective, self-reflective enquiry undertaken by participants in social situations in order to improve the rationality and justice of their own social and educational practices” (Kemmis et al., 1988, p. 5). Community research is described as an approach that “conveys a much more intimate, human and self-defined space” (p. 127). Community research relies on and validates the community’s own definitions. As the project is informed by the social at a community level, it is described as “community action research or emancipatory research” (Smith, 1999, p. 127). It seeks to demonstrate benefit to the community, making positive differences in the lives of Indigenous People and communities. The data collection techniques included survey questionnaires, video recording of teaching and learning processes, teacher reflective video analysis of teaching, observations, semi-structured interviews and student numeracy testing. As a result of these processes, the findings indicate that VET course teachers work hard to adopt contextualising strategies to their teaching, however this process is not always straight forward because of the perceptions of how mathematics has been taught and learned historically. Further teachers, trainers and students have high expectations of one another with the view to successful outcomes from the courses.
Resumo:
In this paper, we propose an approach which attempts to solve the problem of surveillance event detection, assuming that we know the definition of the events. To facilitate the discussion, we first define two concepts. The event of interest refers to the event that the user requests the system to detect; and the background activities are any other events in the video corpus. This is an unsolved problem due to many factors as listed below: 1) Occlusions and clustering: The surveillance scenes which are of significant interest at locations such as airports, railway stations, shopping centers are often crowded, where occlusions and clustering of people are frequently encountered. This significantly affects the feature extraction step, and for instance, trajectories generated by object tracking algorithms are usually not robust under such a situation. 2) The requirement for real time detection: The system should process the video fast enough in both of the feature extraction and the detection step to facilitate real time operation. 3) Massive size of the training data set: Suppose there is an event that lasts for 1 minute in a video with a frame rate of 25fps, the number of frames for this events is 60X25 = 1500. If we want to have a training data set with many positive instances of the event, the video is likely to be very large in size (i.e. hundreds of thousands of frames or more). How to handle such a large data set is a problem frequently encountered in this application. 4) Difficulty in separating the event of interest from background activities: The events of interest often co-exist with a set of background activities. Temporal groundtruth typically very ambiguous, as it does not distinguish the event of interest from a wide range of co-existing background activities. However, it is not practical to annotate the locations of the events in large amounts of video data. This problem becomes more serious in the detection of multi-agent interactions, since the location of these events can often not be constrained to within a bounding box. 5) Challenges in determining the temporal boundaries of the events: An event can occur at any arbitrary time with an arbitrary duration. The temporal segmentation of events is difficult and ambiguous, and also affected by other factors such as occlusions.