Supplementary material : large scale read classification for next generation sequencing

Next Generation Sequencing (NGS) has revolutionised molecular biology, resulting in an explosion of data sets and an increasing role in clinical practice. Such applications necessarily require rapid identification of the organism as a prelude to annotation and further analysis. NGS data consist of a substantial number of short sequence reads, given context through downstream assembly and annotation, a process requiring reads consistent with the assumed species or species group. Highly accurate results have been obtained for restricted sets using SVM classifiers, but such methods are difficult to parallelise and success depends on careful attention to feature selection. This work examines the problem at very large scale, using a mix of synthetic and real data with a view to determining the overall structure of the problem and the effectiveness of parallel ensembles of simpler classifiers (principally random forests) in addressing the challenges of large scale genomics.

Design of a traumatic injury simulator for assessing lower limb response to high loading rates

Current military conflicts are characterized by the use of the improvised explosive device. Improvements in personal protection, medical care, and evacuation logistics have resulted in increasing numbers of casualties surviving with complex musculoskeletal injuries, often leading to lifelong disability. Thus, there exists an urgent requirement to investigate the mechanism of extremity injury caused by these devices in order to develop mitigation strategies. In addition, the wounds of war are no longer restricted to the battlefield; similar injuries can be witnessed in civilian centers following a terrorist attack. Key to understanding such mechanisms of injury is the ability to deconstruct the complexities of an explosive event into a controlled, laboratory-based environment. In this article, a traumatic injury simulator, designed to recreate in the laboratory the impulse that is transferred to the lower extremity from an anti-vehicle explosion, is presented and characterized experimentally and numerically. Tests with instrumented cadaveric limbs were then conducted to assess the simulator’s ability to interact with the human in two mounting conditions, simulating typical seated and standing vehicle passengers. This experimental device will now allow us to (a) gain comprehensive understanding of the load-transfer mechanisms through the lower limb, (b) characterize the dissipating capacity of mitigation technologies, and (c) assess the bio-fidelity of surrogates.

A standing vehicle occupant is likely to sustain a more severe injury than one who has flexed knees in an under‐vehicle explosion : a cadaveric study

The lower limb of military vehicle occupants has been the most injured body part due to undervehicle explosions in recent conflicts. Understanding the injury mechanism and causality of injury severity could aid in developing better protection. Therefore, we tested 4 different occupant postures (seated, brace, standing, standing with knee locked in hyper‐extension) in a simulated under‐vehicle explosion (solid blast) using our traumatic injury simulator in the laboratory; we hypothesised that occupant posture would affect injury severity. No skeletal injury was observed in the specimens in seated and braced postures. Severe, impairing injuries were observed in the foot of standing and hyper‐extended specimens. These results demonstrate that a vehicle occupant whose posture at the time of the attack incorporates knee flexion is more likely to be protected against severe skeletal injury to the lower leg.

Use of cadavers and anthropometric test devices (ATDs) for assessing lower limb injury outcome from under‐vehicle explosions

Lower extremities are particularly susceptible to injury in an under‐vehicle explosion. Operational fitness of military vehicles is assessed through anthropometric test devices (ATDs) in full‐scale blast tests. The aim of this study was to compare the response between the Hybrid‐III ATD, the MiL‐Lx ATD and cadavers in our traumatic injury simulator, which is able to replicate the response of the vehicle floor in an under‐vehicle explosion. All specimens were fitted with a combat boot and tested on our traumatic injury simulator in a seated position. The load recorded in the ATDs was above the tolerance levels recommended by NATO in all tests; no injuries were observed in any of the 3 cadaveric specimens. The Hybrid‐III produced higher peak forces than the MiL‐Lx. The time to peak strain in the calcaneus of the cadavers was similar to the time to peak force in the ATDs. Maximum compression of the sole of the combat boot was similar for cadavers and MiL‐Lx, but significantly greater for the Hybrid‐III. These results suggest that the MiL‐Lx has a more biofidelic response to under‐vehicle explosive events compared to the Hybrid‐III. Therefore, it is recommended that mitigation strategies are assessed using the MiL‐Lx surrogate and not the Hybrid‐III.

Prospects for studying how high-intensity compression waves cause damage in human blast injuries

Since World War I, explosions have accounted for over 70% of all injuries in conflict. With the development of improved personnel protection of the torso, improved medical care and faster aeromedical evacuation, casualties are surviving with more severe injuries to the extremities. Understanding the processes involved in the transfer of blast-induced shock waves through biological tissues is essential for supporting efforts aimed at mitigating and treating blast injury. Given the inherent heterogeneities in the human body, we argue that studying these processes demands a highly integrated approach requiring expertise in shock physics, biomechanics and fundamental biological processes. This multidisciplinary systems approach enables one to develop the experimental framework for investigating the material properties of human tissues that are subjected to high compression waves in blast conditions and the fundamental cellular processes altered by this type of stimuli. Ultimately, we hope to use the information gained from these studies in translational research aimed at developing improved protection for those at risk and improved clinical outcomes for those who have been injured from a blast wave.

Chemiluminescence imaging in supersonic combustors operating in radical-farming mode

Emission spectroscopy was used to investigate ignition and combustion characteristics of supersonic combustion ramjet engines. Two-dimensional scramjet models with inlet injection, fuelled with hydrogen gas, were used in the study. The scramjet engines were configured to operate in radical farming mode, where combustion radicals are formed behind shock waves reflected at the walls. The chemiluminescence emission signals were recorded in a two-dimensional, time-integrated fashion to give information on the location and distribution of the radical farms in the combustors. High signal levels were detected in localised regions immediately downstream of shock reflections, an indication of localised hydroxyl formation supporting the concept of radical farming. Results are presented for a symmetric as well as an asymmetric scramjet geometry. These data represent the first successful visualisation of radical farms in the hot pockets of a supersonic combustor. Spectrally resolved measurements have been obtained in the ultraviolet wavelength range between 300 and 400 nm. This data shows that the OH! chemiluminescence signal around 306nm is not the most dominant source of radiation observed in the radical farms.

Impulse facility simulation of hypervelocity radiating flows

We describe the X-series impulse facilities at The University of Queensland and show that they can produce useful high speed flows of relevance to the study of high temperature radiating flow flields characteristic of atmospheric entry. Two modes of operation are discussed: (a) the expansion tube mode which is useful for subscale aerodynamic testing of vehicles and (b) the non-reflected shock tube mode which can be used to emulate the nonequilibrium radiating region immediately following the bow shock of a flight vehicle.

Pilot plant studies of ion exchange for desalination of coal seam gas produced water

This paper reports a study of ion exchange (IX) as an alternative CSG water treatment to the widely used reverse osmosis (RO) desalination process. An IX pilot plant facility has been constructed and operated using both synthetic and real CSG water samples. Application of appropriate synthetic resin technology has proved the effectiveness of IX processes.

Reflections on tomorrow’s menu : evidence for inpatient meal preferences at a large tertiary public hospital

There are limited studies that describe patient meal preferences in hospital; however this data is critical to develop menus that address satisfaction and nutrition whilst balancing resources. This quality study aimed to determine preferences for meals and snacks to inform a comprehensive menu revision in a large (929 bed) tertiary public hospital. The method was based on Vivanti et al. (2008) with data collected by two final year dietetic students. The first survey comprised 72 questions, achieved a response rate of 68% (n = 192), with the second more focused at 47 questions achieving a higher response rate of 93% (n = 212). Findings showed over half the patients reporting poor or less than normal appetite, 20% describing taste issues, over a third with a LOS >7 days, a third with a MST _ 2 and less than half eating only from the general menu. Soup then toast was most frequently reported as eaten at home when unwell, and whilst most reported not missing any foods when in hospital (25%), steak was most commonly missed. Hot breakfasts were desired by the majority (63%), with over half preferring toast (even if cold). In relation to snacks, nearly half (48%) wanted something more substantial than tea/coffee/biscuits, with sandwiches (54%) and soup (33%) being suggested. Sandwiches at the evening meal were not popular (6%). Difficulties with using cutlery and meal size selection were identified as issues. Findings from this study had high utility and supported a collaborative and evidenced based approach to a successful major menu change for the hospital.

Let them eat steak : food preferences of patients in a tertiary public hospital

Information on foods patients like and dislike is the essential basis for planning menus which are acceptable to patients and promote adequate consumption. The aim of this study was to obtain quantitative data on the food preferences of inpatients at a large metropolitan public hospital for use in menu planning. Methodology was based on a study by Williams et al (1988), and included additional questions about appetite and taste changes. The survey used a 9 point hedonic scale to rate foods listed in random order and was modified to incorporate more contemporary foods than those used in the originalWilliams study. Surveys were conducted by final year University of Queensland dietetics students on Food Service Practicum at the Royal Brisbane and Women’s Hospital (929 beds) in 2012. The first survey (220 questions, n = 157) had a response rate of 61%. The second included more sandwich fillings and salads (231 questions, n = 219, response rate 67%). Total number surveyed was 376. Results showed the most preferred foods were roast potato, grilled steak, ice cream, fresh strawberries, roast lamb, roast beef, grapes and banana. The least preferred foods were grapefruit, soybeans, lentils, sardines, prune juice and grapefruit juice. Patients who reported taste changes (10%) had similar food preferences to those who didn’t report taste changes. Patients who reported poor/very poor appetite (10%) generally scored foods lower than those who reported OK (22%), good/very good appetite (65%). The results of this study informed planning for a new patient menu at the RBWH in December 2012.

Innovations in dietetic training in foodservice management : can early exposure to practice enhance final year competency development?

Student engagement in the delivery of theoretical course materials is a current challenge in the tertiary sector including for dietetic training. In 2011 with the creation of a new nutritionist position for Queensland Meals on Wheels (QMOW), a service learning approach to support this organisation was used with third year dietetic students undertaking two days of structured activities at various QMOW sites in South East Queensland, aligned with coursework in Foodservice Management (FSM). This cohort of students was then followed in their final year post successful completion of five weeks professional practice in FSM to see if this experience supported readiness for placement and competency development. Evaluation was undertaken of eligible students (n = 50) via paper based survey (response rate 94%) with all participating in targeted focus groups. Findings showed that students acknowledged the QMOW experience (on reflection 14 months later) providing opportunity for participation and/or observation in 5 of 12 FSM areas taught in third year, including food safety, meal production, assembly, delivery and dishwashing. Over half the students identified good exposure to FSM competency areas during the QMOW experience, with 83% satisfied with their competency exposure and subsequent practice during final year placements. A consistent theme emerged from focus groups supporting inclusion of practical opportunities with the theoretical component of the FSM subject to highlight relevance to learning. These findings highlight the importance of such teaching initiatives to met student learning preferences, linking theory with practice and supporting competency development in the final year of training programs.

Pushing cultural competence boundaries in nutrition and dietetics training

A health workforce ready for safe practice is a government priority, and particularly critical to support indigenous communities closing ‘the gap’. Increased pressure exists on dietetic training programs for quality placements, with fewer opportunities for immersion in Aboriginal and Torres Strait Islander communities to demonstrate cultural competence. In 2012, Queensland University of Technology established a partnership with Apunipima Cape York Health Council with 56 weeks of dietetic placement for 8 students provided to achieve these aims. Clinical practice in Community Public Health Nutrition (CPHN) was structured in a standard 6 week placement, with Individual Case Management (ICM) and Foodservice Management (FSM) integrated across 8 weeks (4 each), with an additional 2 weeks ICM prior in a metropolitan indigenous health service. Students transitioned from urban to rural then remote sites, with new web-based technologies used for support. Strong learning opportunities were provided, with CPHN projects in antenatal and child health, FSM on standardisation of procedures in a 22 bed health facility, and ICM exposing students to a variety of cases via hospital in/outpatients, general clinics and remote community outreach. Supervisor focus group evaluation was positive, with CPHN and FSM enhancing capacity of service. Student focus group evaluation revealed placements exceeded expectations, with rating high, and strong confidence in cultural competence described. Students debriefed final and third year cohorts on their experiences, with increased awareness and enthusiasm for work with indigenous communities indicated by groups. With the success of this partnership, placements are continuing 2013, and new boundaries in dietetic training established.

Sharpening our tools – translating research into practice

Providing culturally appropriate health communication tools at a community level, whilst meeting funding objectives set by Government led initiatives, can be challenging. Literature states that a translational research framework fostering community communication can encourage the development of appropriate communication tools to facilitate transfer of health information between community and researchers. Reflections from initial Need for Feed cooking and nutrition education program trials in remote Indigenous communities across Cape York indicated program resources were neither meeting community nor researchers needs. In response, a translational research framework was modelled with collaborative partnerships formed between researchers and community with the aim of modifying current resources. Local working groups were established to facilitate communication and guide continual remodelling and retrial of resources for successive programs. Feedback from working groups indicated community members wanted resources with more pictures and less words. Partnership with Chronic Disease Resources Online (CDRO) led to the development of pictorial resources including 3 evaluation tools, 27 recipe sets and 10 education support materials. Between June to December 2012 resources were trialled across 4 Cape York communities with 69 school aged children and 4 community elders. Qualitative data has indicated high satisfaction with modified pictorial resources, proving pictorial resources to be an effective and culturally appropriate method to both communicate health messages to community and facilitate flow of evaluation data to researchers. A translational research framework fostering communication between community and researchers can potentially enhance the quality of health communication tools.

High-throughput indentational elasticity measurements of hydrogel extracellular matrix substrates

Much interest surrounds the effect of extracellular matrix (ECM) elasticity on cell behavior. Here we present a rapid method for measuring the elasticity of synthetic ECM substrates based on indentation of the substrate with a ferromagnetic sphere and optical tracking of the resulting deformation. We find that this method yields order-of-magnitude agreement with atomic force microscopy elasticity measurements, but that the degree of this agreement depends strongly on sphere density and gel elasticity. In its regime of greatest accuracy, we envision that this method may be used for high-throughput characterization of ECM substrates in cell biological studies.