University life and Australian homes : three case studies of international Muslim students in Brisbane

Despite a significant increase in enrolments of postgraduate international Muslim students within Australian universities, little is known about their perceptions of life within Australian homes while undertaking their studies. The aim of this study is to investigate the ways in which students’ cultural and religious traditions affect their use of domestic spaces within the homes in which they reside. The research found that participants faced some minor difficulties in achieving privacy, maintaining modesty and extending hospitality while able to perform their daily activities in Australian designed homes. The findings suggest that greater research attention needs to be given to the development of Australian home designs that are adaptable to the needs of a multicultural society. Australian society encompasses diverse cultural customs and requirements with respect to home design, and these are yet to be explored.

Patient satisfaction from two studies of collaborative doctor : pharmacist prescribing in Australia

Background Pharmacist prescribing has been introduced in several countries and is a possible future role for pharmacy in Australia. Objective To assess whether patient satisfaction with the pharmacist as a prescriber, and patient experiences in two settings of collaborative doctor-pharmacist prescribing may be barriers to implementation of pharmacist prescribing. Design Surveys containing closed questions, and Likert scale responses, were completed in both settings to investigate patient satisfaction after each consultation. A further survey investigating attitudes towards pharmacist prescribing, after multiple consultations, was completed in the sexual health clinic. Setting and Participants A surgical pre-admission clinic (PAC) in a tertiary hospital and an outpatient sexual health clinic at a university hospital. Two hundred patients scheduled for elective surgery, and 17 patients diagnosed with HIV infection, respectively, recruited to the pharmacist prescribing arm of two collaborative doctor-pharmacist prescribing studies. Results Consultation satisfaction response rates in PAC and the sexual health clinic were 182/200 (91%) and 29/34 (85%), respectively. In the sexual health clinic, the attitudes towards pharmacist prescribing survey response rate were 14/17 (82%). Consultation satisfaction was high in both studies, most patients (98% and 97%, respectively) agreed they were satisfied with the consultation. In the sexual health clinic, all patients (14/14) agreed that they trusted the pharmacist’s ability to prescribe, care was as good as usual care, and they would recommend seeing a pharmacist prescriber to friends. Discussion and Conclusion Most of the patients had a high satisfaction with pharmacist prescriber consultations, and a positive outlook on the collaborative model of care in the sexual health clinic.

Privacy, modesty, hospitality, and the design of Muslim homes: A literature review

Traditional Islamic teachings and traditions involve guidelines that have direct applications in the domestic sphere. The principles of privacy, modesty, and hospitality are central to these guidelines; each principle has a significant effect on the design of Muslim homes, as well as on the organization of space and domestic behaviors within each home. This paper reviews literature on the privacy, modesty, and hospitality within Muslim homes. Nineteen publications from 1986 to 2013 were selected and analyzed for content related to the meaning of privacy, modesty, and hospitality in Islam and the design of Muslim homes. Despite the commonly shared guidelines for observing privacy, modesty, and hospitality within each home, Muslims living in different countries are influenced by cultural factors that operate within their country of residence. These factors help to shape the architectural styles and use of space within Muslim homes in different ways. Awareness of the multifactorial nature of the influences on the Muslim perception of home and the use of space is necessary for architects, building designers, engineers, and builders to be properly equipped to meet the needs of clients.

Are Australian homes liveable and adaptable for Muslim families? - Six case studies in Brisbane

This paper investigates how Muslims living in Brisbane live within their current Australian homes and the liveability and adaptability of these homes from the perspective of home dwellers with respect to their Islamic faiths, cultural traditions and lifestyle. A qualitative case study approach was used to gather information about Muslims’ use of domestic spaces through their lived experiences, within an Australian context. Six participants were interviewed, including: a) three Muslim families residing in one suburb of Brisbane, and; b) three international Muslim students living in three different Brisbane suburbs. These cases indicate that apart from minor difficulties, case study participants were able to perform their daily activities within their current homes through various adaptations made to ensure their respective domestic domains provided their families with privacy and a sense of security and safety. Insight gained from these cases suggest the need for more research into the homes of Muslims homes within an Australian context and the development of culturally adaptable housing as a means of meeting the diverse needs of modern Australian multicultural society.

Design democratisation and its understandings through the meaning of the word “design” in Portuguese colonised countries

This paper explores the literature and analyses the different uses and understandings of the word “design” in Portuguese colonised countries, using Brazil as the main example. It investigates the relationship between the linguistic existence of terms to define and describe “design” as an activity and field, and the roles and perceptions of Design by the general society. It also addresses the effects that the lack of a proper translation causes on the local community from a cultural point of view. The current perception of Design in Portuguese colonies is associated to two main aspects: linguistic and historical. Both of them differentiate the countries taken into consideration from other countries that have a different background. The changes associated to the meaning of “design” throughout the years, caused a great impact on the perceptions that people have about Design. On the other hand, the development of Design has also influenced the changes on the meaning of the term, as a result of the legacy from the colonisation period and also as a characteristic of the Portuguese language. Design has developed and reached a level of excellence in Portuguese colonised countries that competes with the most traditional Design cultures in the world. However, this level of Design is enmeshed into an elite belonging to universities and specialised markets, therefore Design is not democratised. The ultimate aim of this study is to promote discussions on how to make the discourse surrounding this area more accessible to people from non-English speaking countries that do not have the word “design” in their local language.

Implementing the self-management threshold learning outcome for law : some intentional design strategies from the current curriculum toolbox

There is a growing awareness of the high levels of psychological distress being experienced by law students and the practising profession in Australia. In this context, a Threshold Learning Outcome (TLO) on self-management has been included in the six TLOs recently articulated as minimum learning outcomes for all Australian graduates of the Bachelor of Laws degree (LLB). The TLOs were developed during 2010 as part of the Australian Learning and Teaching Council’s (ALTC’s) project funded by the Australian Government to articulate ‘Learning and Teaching Academic Standards’. The TLOs are the result of a comprehensive national consultation process led by the ALTC’s Discipline Scholars: Law, Professors Sally Kift and Mark Israel.1 The TLOs have been endorsed by the Council of Australian Law Deans (CALD) and have received broad support from members of the judiciary and practising profession, representative bodies of the legal profession, law students and recent graduates, Legal Services Commissioners and the Law Admissions Consultative Committee. At the time of writing, TLOs for the Juris Doctor (JD) are also being developed, utilising the TLOs articulated for the LLB as their starting point but restating the JD requirements as the higher order outcomes expected of graduates of a ‘Masters Degree (Extended)’, this being the award level designation for the JD now set out in the new Australian Qualifications Framework.2 As Australian law schools begin embedding the learning, teaching and assessment of the TLOs in their curricula, and seek to assure graduates’ achievement of them, guidance on the implementation of the self-management TLO is salient and timely.

Understanding, utilizing and valuing design tools in business

This chapter examines the tools and activities (referred to as approaches) used by a catalyst while facilitating a design-led transformation within an Australian manufacturing small to medium enterprise (SME). Design-led innovation (DLI) aids the use of design at a higher strategic level; however few existing studies investigate the relative influence of approaches used by a catalyst while helping a firm to make a transition in the utilisation of design, specifically from a styling tool to a strategic process. This paper identifies the triggers to encouraging a shift toward understanding, utilising and valuing the business level outcomes of design through a range of design tools and activities within the participating company. Through a 12 month action research program, staff interviews and a reflective journal were utilised as data collection techniques to assess the successfulness of the approaches used during this project. It was found that, through the use of both successful and unsuccessful approaches, the catalyst achieved two key outcomes within the firm: 1) Improvements in the firm’s ability to challenge internal assumptions and standard practices; and 2) the creation of an informed and accurate awareness of company and industry issues. Approaches that made a higher impact of the firm were deemed successful, and were generally relatable to the task at hand, as perceived by employees. Additionally, the sequence in which the approaches were utilised was found to have a direct influence on their successfulness. Learnings from this research will assist future catalysts to facilitate a design-led transformation within a manufacturing SME through the use of design tools and activities with greater effectiveness.

Studies on the failure of unreinforced masonry shear walls

This thesis aims at studying the structural behaviour of high bond strength masonry shear walls by developing a combined interface and surface contact model. The results are further verified by a cost-effective structural level model which was then extensively used for predicting all possible failure modes of high bond strength masonry shear walls. It is concluded that the increase in bond strength of masonry modifies the failure mode from diagonal cracking to base sliding and doesn't proportionally increase the in-plane shear capacity. This can be overcome by increasing pre-compression pressure which causes failure through blocks. A design equation is proposed and high bond strength masonry is recommended for taller buildings and/ or pre-stressed masonry applications.

Experimental studies of cold-formed steel hollow section columns at elevated temperatures

This paper reports the details of an experimental study of cold-formed steel hollow section columns at ambient and elevated temperatures. In this study the global buckling behaviour of cold-formed Square Hollow Section (SHS) slender columns under axial compression was investigated at various uniform elevated temperatures up to 700℃. The results of these column tests are reported in this paper, which include the buckling/failure modes at elevated temperatures, and ultimate load versus temperature curves. Finite element models of tested columns were also developed and their behaviour and ultimate capacities at ambient and elevated temperatures were studied. Fire design rules given in European and American standards including the Direct Strength Method (DSM) based design rules were used to predict the ultimate capacities of tested columns at elevated temperatures. Elevated temperature mechanical properties and stress-strain models given in European steel design standards and past researches were used with design rules and finite element models to investigate their effects on SHS column capacities. Comparisons of column capacities from tests and finite element analyses with those predicted by current design rules were used to determine the accuracy of currently available column design rules in predicting the capacities of SHS columns at elevated temperatures and the need to use appropriate elevated temperature material stress-strain models. This paper presents the important findings derived from the comparisons of these column capacities.

XD: Experience Design Magazine (Issue One)

XD: Experience Design Magazine is an interdisciplinary publication that focuses on the concept and practice of ‘experience design’, as a holistic concept separate from the well known concept of ‘user experience’. The magazine aims to present a mixture of interrelated perspectives from industry and academic researchers with practicing designers and managers. The informal, journalistic style of the publication aims to simultaneously provide a platform for researchers and other writers to promote their work in an applied way for global impact, and for industry designers to present practical perspectives to inspire a global research audience. Each issue will feature a series of projects, interviews, visuals, reviews and creative inspiration – all of which help everyone understand why experience design is important, who does it and where, how experience design is done in practice and how experience design research can enhance practice. Contents Issue 1 Miller, F. Developing Principles for Designing Optimal Experiences Lavallee, P. Design for Emotions Khan, H. The Entropii XD Framework Bowe, M. & Silvers, A. First Steps in Experience Design Leaper, N. Learning by Design Forrest, R. & Roberts, T. Interpretive Design: Think, Do, Feel Tavakkoli, P. Working Hard at Play Stow, C. Designing Engaging Learning Experiences Wood, M. Enhance Your Travel Experience Using Apps Miller, F. Humanizing It Wood, M. Designing the White Night Experience Newberry, P. & Farnham, K. Experience Design Book Excerpt

Inference and hypothesis in ethnographic studies

This chapter explores the possibility and exigencies of employing hypotheses, or educated guesses, as the basis for ethnographic research design. The authors’ goal is to examine whether using hypotheses might provide a path to resolve some of the challenges to knowledge claims produced by ethnographic studies. Through resolution of the putative division between qualitative and quantitative research traditions , it is argued that hypotheses can serve as inferential warrants in qualitative and ethnographic studies.

Use of parametric modelling and climate-based metrics for the efficient design of daylight strategies in buildings with complex geometries

The purpose of this research is to assess daylight performance of buildings with climatic responsive envelopes with complex geometry that integrates shading devices in the façade. To this end two case studies are chosen due to their complex geometries and integrated daylight devices. The effect of different parameters of the daylight devices is analysed through Climate base daylight metrics.

Growing food in the city : Design ideations for urban residential gardeners

Urban agriculture refers to the production of food in urban and peri-urban spaces. It can contribute positively to health and food security of a city, while also reducing ‘food miles.’ It takes on many forms, from the large and organised community garden, to the small and discrete backyard or balcony. This study focuses on small-scale food production in the form of residential gardening for home or personal use. We explore opportunities to support people’s engagement in urban agriculture via human-computer interaction design. This research presents the findings and HCI design insights from our study of residential gardeners in Brisbane, Australia. By exploring their understanding of gardening practice with a human-centred design approach, we present six key themes, highlighting opportunities and challenges relating to available time and space; the process of learning and experimentation; and the role of existing online platforms to support gardening practice. Finally we discuss the overarching theme of shared knowledge, and how HCI could improve community engagement and gardening practice.

Local buckling studies of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential and commercial buildings as primary load bearing structural elements. They are often made of thin steel sheets and hence they are more susceptible to local buckling. The buckling behaviour of cold-formed steel compression members under fire conditions is not fully investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken to investigate the local buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. First a series of 91 local buckling tests was conducted at ambient and uniform elevated temperatures up to 700oC on cold-formed lipped and unlipped channels. Suitable finite element models were then developed to simulate the behaviour of tested columns and were validated using test results. All the ultimate load capacity results for local buckling were compared with the predictions from the available design rules based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Parts 1.2 and 1.3 and the direct strength method (DSM), based on which suitable recommendations have been made for the fire design of cold-formed steel compression members subject to local buckling at uniform elevated temperatures.