Analysis of traffic injury severity in a mega city of a developing country

Despite a considerable amount of research on traffic injury severities, relatively little is known about the factors influencing traffic injury severity in developing countries, and in particular in Bangladesh. Road traffic crashes are a common headline in daily newspapers of Bangladesh. It has also recorded one of the highest road fatality rates in the world. This research identifies significant factors contributing to traffic injury severity in Dhaka – a mega city and capital of Bangladesh. Road traffic crash data of 5 years from 2007 to 2011 were collected from the Dhaka Metropolitan Police (DMP), which included about 2714 traffic crashes. The severity level of these crashes was documented in a 4-point ordinal scale: no injury (property damage), minor injury, severe injury, and death. An ordered Probit regression model has been estimated to identify factors contributing to injury severities. Results show that night time influence is associated with a higher level injury severity as is for individuals involved in single vehicle crashes. Crashes on highway sections within the city are found to be more injurious than crashes along the arterial and feeder roads. There is a lower likelihood of injury severity, however, if the road sections are monitored and enforced by the traffic police. The likelihood of injuries is lower on two-way traffic arrangements than one-way, and at four-legged intersections and roundabouts compare to road segments. The findings are compared with those from developed countries and the implications of this research are discussed in terms of policy settings for developing countries.

Suicidal ideation and behaviours among university students in Australia

Objective: The aim of the study was to investigate the prevalence and demographic correlates of suicidal ideation and behaviours among university students in Australia and the utilisation of mental health services by this population. Method: Suicidal ideation and behaviours and demographic variables were assessed in a population of 1,678 undergraduate students by use of a modified Suicide Ideation Scale (SIS) and questionnaire. Results: Sixty two percent of students surveyed showed some suicidal ideation and 6.6% reported one or more suicide attempts. Over half of the group who reported suicide attempts did not use any type of mental health services. Suicidal ideation was found to be highly correlated with previous use of mental health services, In examining the relationship between suicidal ideation (SI) end demographic variables, SI was not significantly different for gender or parental marital status but was related to living arrangements, racial groups, religious affiliation and father's education. Conclusions: The results suggest that a higher proportion of students reported suicidal ideation and behaviours than that documented in related studies undertaken in the USA. While these findings draw attention to a higher level of suicidal ideation in students who utilise mental health assistance, more than half of those who reported suicide attempts did not use any kind of mental health service. The study has particular implications for detecting and assisting young people with a high suicide risk within the university environment.

Shear strengths of lipped channel beams with stiffened web openings using numerical studies

This paper presents the details of numerical studies on the shear behaviour and strength of lipped channel beams (LCBs) with stiffened web openings. Over the last couple of decades, cold-formed steel beams have been used extensively in residential, industrial and commercial buildings as primary load bearing structural components. Their shear strengths are considerably reduced when web openings are included for the purpose of locating building services. Our research has shown that shear strengths of LCBs were reduced by up to 70% due to the inclusion of web openings. Hence there is a need to improve the shear strengths of LCBs with web openings. A cost effective way to improve the detrimental effects of a large web opening is to attach appropriate stiffeners around the web openings in order to restore the original shear strength and stiffness of LCBs. Hence numerical studies were undertaken to investigate the shear strengths of LCBs with stiffened web openings. In this research, finite element models of LCBs with stiffened web openings in shear were developed to simulate the shear behaviour and strength of LCBs. Various stiffening methods using plate and LCB stud stiffeners attached to LCBs using screw-fastening were attempted. The developed models were then validated by comparing their results with experimental results and used in parametric studies. Both finite element analysis and experimental results showed that the stiffening arrangements recommended by past re-search for cold-formed steel channel beams are not adequate to restore the shear strengths of LCBs with web openings. Therefore new stiffener arrangements were proposed for LCBs with web openings based on experimental and finite element analysis results. This paper presents the details of finite element models and analyses used in this research and the results including the recommended stiffener arrangements.

Exploring shared services from an IS perspective : a literature review and research agenda

Shared services have gained significance as an organizational arrangement, in particular for support functions, to reduce costs, increase quality and create new capabilities. The Information Systems (IS) function is amenable to sharing arrangements and information systems can enable sharing in other functional areas. However, despite being a promising area for IS research, literature on shared services in the IS discipline is scarce and scattered. There is still little consensus on what shared services is. Moreover, a thorough understanding of why shared services are adopted, who are involved, and how things are shared is lacking. In this article, we set out to progress IS research on shared services by establishing a common ground for future research and proposing a research agenda to shape the field based on an analysis of the IS literature. We present a holistic and inclusive definition, discuss the primacy of economic-strategic objectives so far, and introduce conceptual frameworks for stakeholders and the notion of sharing. We also provide an overview of the theories and research methods applied. We propose a research agenda that addresses fundamental issues related to objectives, stakeholders, and the notion of sharing to lay the foundation for taking IS research on shared services forward.

Alternative modes of entrepreneurial opportunity exploitation : the case on inter-organizational project

While entrepreneurship research has taken firm formation to be the predominant mode of opportunity exploitation, entrepreneurship can take place through many other types of organizational arrangements. In the present article, we consider one such alternative arrangement, namely the formation of inter-organizational projects (IOPs). We propose a multi-level contingency model that suggests that uncertainty both at the level of the firm and at the level of the environment makes the exploitation of opportunities through IOPs more likely. The model is tested by telephone survey data collected amongst a panel of 1725 SMEs and longitudinal industry data. Our findings provide strong support for the industry-level part of the model, but interestingly, only partial support for the firm level part of the model. This indicates that the effects of uncertainty need to be dissected into different levels of analysis to understand the conditions under which alternative modes of opportunity exploitation can be a prominent entrepreneurial alternative to new firm formation.

World's pre-eminent powers recent treatment to international law : a paradigm of interest served or harmed

The US's recent rejection of some international laws may have been done to ensure American interests but it may have the opposite effects. While its recent rejection of some international legal arrangements has meant an unpopular opinion of America, its interest has been served.

Which procurement system? Towards a universal procurement selection technique

Two approaches are described, which aid the selection of the most appropriate procurement arrangements for a building project. The first is a multi-attribute technique based on the National Economic Development Office procurement path decision chart. A small study is described in which the utility factors involved were weighted by averaging the scores of five 'experts' for three hypothetical building projects. A concordance analysis is used to provide some evidence of any abnormal data sources. When applied to the study data, one of the experts was seen to be atypical. The second approach is by means of discriminant analysis. This was found to provide reasonably consistent predictions through three discriminant functions. The analysis also showed the quality criteria to have no significant impact on the decision process. Both approaches provided identical and intuitively correct answers in the study described. Some concluding remarks are made on the potential of discriminant analysis for future research and development in procurement selection techniques.

The impact of construction organisations’ learning capabilities on collaborative projects

Dynamic capability theory asserts that the learning capabilities of construction organisations influence the degree to which value-for-money (VfM) is achieved on collaborative projects. However, there has been little study conducted to verify this relationship. The evidence is particularly limited within the empirical context of infrastructure delivery in Australia. Primarily drawing on the theoretical perspectives of the resource-based view of the firm (e.g. Barney 1991), dynamic capabilities (e.g. Helfat et al. 2007), absorptive capacity (e.g. Lane et al. 2006) and knowledge management (e.g. Nonaka 1994), this paper conceptualises learning capability as a knowledge-based dynamic capability. Learning capability builds on the micro-foundations of high-order learning routines, which are deliberately developed by construction organisations for managing collaborative projects. Based on this conceptualisation of learning capability, an exploratory case study was conducted. The study investigated the operational and higher-order learning routines adopted by a project alliance team to successfully achieve VfM. The case study demonstrated that the learning routines of the alliance project were developed and modified by the continual joint learning activities of participant organisations. Project-level learning routines were found to significantly influence the development of organisational-level learning routines. In turn, the learning outcomes generated from the alliance project appeared to significantly influence the development of project management routines and contractual arrangements applied by the participant organisations in subsequent collaborative projects. The case study findings imply that the higher-order learning routines that underpin the learning capability of construction organisations have the potential to influence the VfM achieved on both current and future collaborative projects.

Faster Monte Carlo simulation of radiotherapy geometries

Using Monte Carlo simulation for radiotherapy dose calculation can provide more accurate results when compared to the analytical methods usually found in modern treatment planning systems, especially in regions with a high degree of inhomogeneity. These more accurate results acquired using Monte Carlo simulation however, often require orders of magnitude more calculation time so as to attain high precision, thereby reducing its utility within the clinical environment. This work aims to improve the utility of Monte Carlo simulation within the clinical environment by developing techniques which enable faster Monte Carlo simulation of radiotherapy geometries. This is achieved principally through the use new high performance computing environments and simpler alternative, yet equivalent representations of complex geometries. Firstly the use of cloud computing technology and it application to radiotherapy dose calculation is demonstrated. As with other super-computer like environments, the time to complete a simulation decreases as 1=n with increasing n cloud based computers performing the calculation in parallel. Unlike traditional super computer infrastructure however, there is no initial outlay of cost, only modest ongoing usage fees; the simulations described in the following are performed using this cloud computing technology. The definition of geometry within the chosen Monte Carlo simulation environment - Geometry & Tracking 4 (GEANT4) in this case - is also addressed in this work. At the simulation implementation level, a new computer aided design interface is presented for use with GEANT4 enabling direct coupling between manufactured parts and their equivalent in the simulation environment, which is of particular importance when defining linear accelerator treatment head geometry. Further, a new technique for navigating tessellated or meshed geometries is described, allowing for up to 3 orders of magnitude performance improvement with the use of tetrahedral meshes in place of complex triangular surface meshes. The technique has application in the definition of both mechanical parts in a geometry as well as patient geometry. Static patient CT datasets like those found in typical radiotherapy treatment plans are often very large and present a significant performance penalty on a Monte Carlo simulation. By extracting the regions of interest in a radiotherapy treatment plan, and representing them in a mesh based form similar to those used in computer aided design, the above mentioned optimisation techniques can be used so as to reduce the time required to navigation the patient geometry in the simulation environment. Results presented in this work show that these equivalent yet much simplified patient geometry representations enable significant performance improvements over simulations that consider raw CT datasets alone. Furthermore, this mesh based representation allows for direct manipulation of the geometry enabling motion augmentation for time dependant dose calculation for example. Finally, an experimental dosimetry technique is described which allows the validation of time dependant Monte Carlo simulation, like the ones made possible by the afore mentioned patient geometry definition. A bespoke organic plastic scintillator dose rate meter is embedded in a gel dosimeter thereby enabling simultaneous 3D dose distribution and dose rate measurement. This work demonstrates the effectiveness of applying alternative and equivalent geometry definitions to complex geometries for the purposes of Monte Carlo simulation performance improvement. Additionally, these alternative geometry definitions allow for manipulations to be performed on otherwise static and rigid geometry.

Performance of elite seated discus throwers in F30s classes : part I: does whole body positioning matter?

Background: Studies on the relationship between performance and design of the throwing frame have been limited and therefore require further investigation. Objectives: The specific objectives were to provide benchmark information about performance and whole body positioning of male athletes in F30s classes. Study Design: Descriptive analysis. Methods: A total of 48 attempts performed by 12 stationary discus throwers in F33 and F34 classes during seated discus throwing event of 2002 International Paralympic Committee Athletics World Championships were analysed in this study. The whole body positioning included overall throwing posture (i.e. number of points of contact between the thrower and the frame, body position, throwing orientation and throwing side) and lower limb placements (i.e. seating arrangements, points of contact on the both feet, type of attachment of both legs and feet). Results: Three (25%), five (42%), one (8%) and three (25%) athletes used from three to six points of contact, respectively. Seven (58%) and five (42%) athletes threw from a standing or a seated position, respectively. A straddle, a stool or a chair was used by six (50%), four (33%) or two (17%) throwers, respectively. Conclusions: This study provides key information for a better understanding of the interaction between throwing technique of elite seated throwers and their throwing frame.

Collaborative governance and innovation in social enterprises

While social enterprises have gained increasing policy attention as vehicles for generating innovative responses to complex social and environmental problems, surprisingly little is known about them. In particular, the social innovation produced by social enterprises (Mulgan, Tucker, Ali, & Sander, 2007) has been presumed rather than demonstrated, and remains under-investigated in the literature. While social enterprises are held to be inherently innovative as they seek to response to social needs (Nicholls, 2010), there has been conjecture that the collaborative governance arrangements typical in social enterprises may be conducive to innovation (Lumpkin, Moss, Gras, Kato, & Amezcua, In press), as members and volunteers provide a source of creative ideas and are unfettered in such thinking by responsibility to deliver organisational outcomes (Hendry, 2004). However this is complicated by the sheer array of governance arrangements which exist in social enterprises, which range from flat participatory democratic structures through to hierarchical arrangements. In continental Europe, there has been a stronger focus on democratic participation as a characteristic of Social Enterprises than, for example, the USA. In response to this gap in knowledge, a research project was undertaken to identify the population of social enterprises in Australia. The size, composition and the social innovations initiated by these enterprises has been reported elsewhere (see Barraket, 2010). The purpose of this paper is to undertake a closer examination of innovation in social enterprises – particularly how the collaborative governance of social enterprises might influence innovation. Given the pre-paradigmatic state of social entrepreneurship research (Nicholls, 2010), and the importance of drawing draw on established theories in order to advance theory (Short, Moss, & Lumpkin, 2009), a number of conceptual steps are needed in order to examine how collaborative governance might influence by social enterprises. In this paper, we commence by advancing a definition as to what a social enterprise is. In light of our focus on the potential role of collaborative governance in social innovation amongst social enterprises, we go on to consider the collaborative forms of governance prevalent in the Third Sector. Then, collaborative innovation is explored. Drawing on this information and our research data, we finally consider how collaborative governance might affect innovation amongst social enterprises.

A public asset management framework for Indonesian local governments

The decentralisation reform in Indonesia has mandated the Central Government to transfer some functions and responsibilities to local governments including the transfer of human resources, assets and budgets. Local governments became giant asset holders almost overnight and most were ill prepared to handle these transformations. Assets were transferred without analysing local government need, ability or capability to manage the assets and no local government was provided with an asset management framework. Therefore, the aim of this research is to develop a Public Asset Management Framework for provincial governments in Indonesia, especially for infrastructure and real property assets. This framework will enable provincial governments to develop integrated asset management procedures throughout asset‘s lifecycle. Achieving the research aim means answering the following three research questions; 1) How do provincial governments in Indonesia currently manage their public assets? 2) What factors influence the provincial governments in managing these public assets? 3) How is a Public Asset Management Framework developed that is specific for the Indonesian provincial governments‘ situation? This research applied case studies approach after a literature review; document retrieval, interviews and observations were collated. Data was collected in June 2009 (preliminary data collection) and January to July 2010 in the major eastern Indonesian provinces. Once the public asset management framework was developed, a focus group was used to verify the framework. Results are threefold and indicate that Indonesian provincial governments need to improve the effectiveness and efficiency of current practice of public asset management in order to improve public service quality. The second result shows that the 5 major concerns that influence the local government public asset management processes are asset identification and inventory systems, public asset holding, asset guidance and legal arrangements, asset management efficiency and effectiveness, and, human resources and their organisational arrangements. The framework was then applied to assets already transferred to local governments and so included a system of asset identification and a needs analysis to classify the importance of these assets to local governments, their functions and responsibilities in delivering public services. Assets that support local government functions and responsibilities will then be managed using suitable asset lifecycle processes. Those categorised as surplus assets should be disposed. Additionally functions and responsibilities that do not need an asset solution should be performed directly by local governments. These processes must be measured using performance measurement indicators. All these stages should be guided and regulated with sufficient laws and regulations. Constant improvements to the quality and quantity of human resources hold an important role in successful public asset management processes. This research focuses on developing countries, and contributes toward the knowledge of a Public Asset Management Framework at local government level, particularly Indonesia. The framework provides local governments a foundation to improve their effectiveness and efficiency in managing public assets, which could lead to improved public service quality. This framework will ensure that the best decisions are made throughout asset decision ownership and provide a better asset life cycle process, leading to selection of the most appropriate asset, improve its acquisition and delivery process, optimise asset performance, and provide an appropriate disposal program.

P.I.C.U., H.D.U., A.O.A. What treatment do we provide?: Current descriptions of the function of intensive care for inpatient Psychiatric Health Care.

Purpose – This paper adds to growing research of psychiatric intensive care units (PICU) by recounting descriptions of psychiatric intensive care settings and discusses the perceptions held by nurses of the organisational interfaces, arrangements and provisions of care in these settings. Design/methodology/approach – Data gathered from focus groups held with nurses from two PICUs was used to establish terminology, defining attributes, related concepts, antecedents, values, processes and concepts related to current practices. A literature search was conducted to permit a review of the conceptual arrangements and contemporary understanding of intensive care for people experiencing acute psychiatric illness based on the perspectives held by the nurses from the focus groups. Findings – Dissonance between service needs and the needs and management of individual patients overshadow strategies to implement comprehensive recovery-oriented approaches. Three factors are reported in this paper that influence standards and procedural practice in PICU; organisational structures; physical structures; and subtype nomenclature. Practical implications – Acute inpatient care is an important part of a comprehensive approach to mental health services. Commonly intensive acute care is delivered in specialised wards or units co-located with acute mental health inpatient units mostly known as PICU. Evidence of the most effective treatment and approaches in intensive care settings that support comprehensive recovery for improved outcomes is nascent. Originality/value – Current descriptions from nurses substantiate wide variations in the provisions, design and classifications of psychiatric intensive care. Idiosyncratic and localised conceptions of psychiatric intensive care are not adequately entailing effective treatment and methods in support of recovery principles for improved and comprehensive outcomes. The authors suggest that more concrete descriptions, guidelines, training and policies for provision of intensive psychiatric health care encompassing the perspective of nursing professionals, would reinforce conceptual construction and thus optimum treatments within a comprehensive, recovery-oriented approach to mental health services.

ICT shared services in the higher education sector : foundations, benefits, success factors and issues

Universities are more and more challenged by the emerging global higher education market, facilitated by advances in Information and Communication Technologies (ICT). This requires them to reconsider their mission and direction in order to function effectively and efficiently, and to be responsive to changes in their environment. In the face of increasing demands and competitive pressures, Universities like other companies, seek to continuously innovate and improve their performance. Universities are considering co-operating or sharing, both internally and externally, in a wide range of areas to achieve cost effectiveness and improvements in performance. Shared services are an effective model for re-organizing to reduce costs, increase quality and create new capabilities. Shared services are not limited to the Higher Education (HE) sector. Organizations across different sectors are adopting shared services, in particular for support functions such as Finance, Accounting, Human Resources and Information Technology. While shared services has been around for more than three decades, commencing in the 1970’s in the banking sector and then been adopted by other sectors, it is an under researched domain, with little consensus on the most fundamental issues even as basic as defining what shared services is. Moreover, the interest in shared services within Higher Education is a global phenomenon. This study on shared services is situated within the Higher Education Sector of Malaysia, and originated as an outcome resulting from a national project (2005 – 2007) conducted by the Ministry of Higher Education (MOHE) entitled "Knowledge, Information Communication Technology Strategic Plan (KICTSP) for Malaysian Public Higher Education"- where progress towards more collaborations via shared services was a key recommendation. The study’s primary objective was to understand the nature and potential for ICT shared services, in particular in the Malaysian HE sector; by laying a foundation in terms of definition, typologies and research agenda and deriving theoretically based conceptualisations of the potential benefits of shared services, success factors and issues of pursuing shared services. The study embarked on this objective with a literature review and pilot case study as a means to further define the context of the study, given the current under-researched status of ICT shared services and of shared services in Higher Education. This context definition phase illustrated a range of unaddressed issues; including a lack of common understanding of what shared services are, how they are formed, what objectives they full fill, who is involved etc. The study thus embarked on a further investigation of a more foundational nature with an exploratory phase that aimed to address these gaps, where a detailed archival analysis of shared services literature within the IS context was conducted to better understand shared services from an IS perspective. The IS literature on shared services was analysed in depth to report on the current status of shared services research in the IS domain; in particular definitions, objectives, stakeholders, the notion of sharing, theories used, and research methods applied were analysed, which provided a firmer base to this study’s design. The study also conducted a detailed content analysis of 36 cases (globally) of shared services implementations in the HE sector to better understand how shared services are structured within the HE sector and what is been shared. The results of the context definition phase and exploratory phase formed a firm basis in the multiple case studies phase which was designed to address the primary goals of this study (as presented above). Three case sites within the Malaysian HE sector was included in this analysis, resulting in empirically supported theoretical conceptualizations of shared services success factors, issues and benefits. A range of contributions are made through this study. First, the detailed archival analysis of shared services in Information Systems (IS) demonstrated the dearth of research on shared services within Information Systems. While the existing literature was synthesised to contribute towards an improved understanding of shared services in the IS domain, the areas that are yet under-developed and requires further exploration is identified and presented as a proposed research agenda for the field. This study also provides theoretical considerations and methodological guidelines to support the research agenda; to conduct better empirical research in this domain. A number of literatures based a priori frameworks (i.e. on the forms of sharing and shared services stakeholders etc) are derived in this phase, contributing to practice and research with early conceptualisations of critical aspects of shared services. Furthermore, the comprehensive archival analysis design presented and executed here is an exemplary approach of a systematic, pre-defined and tool-supported method to extract, analyse and report literature, and is documented as guidelines that can be applied for other similar literature analysis, with particular attention to supporting novice researchers. Second, the content analysis of 36 shared services initiatives in the Higher Education sector presented eight different types of structural arrangements for shared services, as observed in practice, and the salient dimensions along which those types can be usefully differentiated. Each of the eight structural arrangement types are defined and demonstrated through case examples, with further descriptive details and insights to what is shared and how the sharing occurs. This typology, grounded on secondary empirical evidence, can serve as a useful analytical tool for researchers investigating the shared services phenomenon further, and for practitioners considering the introduction or further development of shared services. Finally, the multiple case studies conducted in the Malaysian Higher Education sector, provided further empirical basis to instantiate the conceptual frameworks and typology derived from the prior phases and develops an empirically supported: (i) framework of issues and challenges, (ii) a preliminary theory of shared services success, and (iii) a benefits framework, for shared services in the Higher Education sector.

Enterprise policy and the metagovernance of firm capabilities

The underlying logic of enterprise policy is that there are impediments to change in economic systems that can be traced to the path-dependent behaviors of economic actors that prevent them from exploring new knowledge and new ways of doing things. Enterprise policy involves firm-level interventions delivered by distributed networks of business advisors coordinated by knowledge intermediaries. These metagovernance arrangements are able to disrupt the path-dependent behaviors of organizations. The logic and benefits of enterprise policy are explored through reference to public administration, strategic management and evolutionary theory, and three case studies.