Creating 'saviour siblings' : the notion of harming by conceiving in the context of healthy children

Over the past decade there have been a number of families who have utilised assisted reproductive technologies (ARTs) to create a tissue-matched child, with the purpose of using the child’s tissue to cure an existing sick child. This inevitably brings such families a sense of hope as the ultimate aim is to overcome a family health crisis. However, this specific use of reproductive technologies has been the subject of significant criticism, most of which is levelled against the potential harm to the ‘saviour’ child. In Australia, families seeking to access reproductive technologies in this context are therefore required to justify their motives to an ethics committee in order to establish, amongst other things, whether the child will suffer harm once born. This paper explores the concept of harm in the context of conception, focusing on whether it is possible to ‘harm’ a healthy child who has been conceived to save another. To achieve this, the paper will evaluate the impact of the ‘non-identity’ principle in the ‘saviour sibling’ context, and assess the existing body of literature which addresses ‘harm’ in the context of conception. As will be established, the majority of such literature has focused on ‘wrongful life’ cases which seek to address whether an existing child who has been born with a disability, has been harmed. Finally, this paper will distinguish the harm arguments in the ‘saviour sibling’ context based on the fact that the harm evaluation concerns the ‘future-life’ assessment of a healthy child.

Analysis of environmental efficiency variation : a materials balance approach

Recent literature has argued that environmental efficiency (EE), which is built on the materials balance (MB) principle, is more suitable than other EE measures in situations where the law of mass conversation regulates production processes. In addition, the MB-based EE method is particularly useful in analysing possible trade-offs between cost and environmental performance. Identifying determinants of MB-based EE can provide useful information to decision makers but there are very few empirical investigations into this issue. This article proposes the use of data envelopment analysis and stochastic frontier analysis techniques to analyse variation in MB-based EE. Specifically, the article develops a stochastic nutrient frontier and nutrient inefficiency model to analyse determinants of MB-based EE. The empirical study applies both techniques to investigate MB-based EE of 96 rice farms in South Korea. The size of land, fertiliser consumption intensity, cost allocative efficiency, and the share of owned land out of total land are found to be correlated with MB-based EE. The results confirm the presence of a trade-off between MB-based EE and cost allocative efficiency and this finding, favouring policy interventions to help farms simultaneously achieve cost efficiency and MP-based EE.

Analysis of productive performance of crop production systems: an integrated analytical framework

Recent literature has argued that environmental efficiency (EE), which is built on the materials balance (MB) principle, is more suitable than other EE measures in situations where the law of mass conversation regulates production processes. In addition, the MB-based EE method is particularly useful in analysing possible trade-offs between cost and environmental performance. Identifying determinants of MB-based EE can provide useful information to decision makers but there are very few empirical investigations into this issue. This article proposes the use of data envelopment analysis and stochastic frontier analysis techniques to analyse variation in MB-based EE. Specifically, the article develops a stochastic nutrient frontier and nutrient inefficiency model to analyse determinants of MB-based EE. The empirical study applies both techniques to investigate MB-based EE of 96 rice farms in South Korea. The size of land, fertiliser consumption intensity, cost allocative efficiency, and the share of owned land out of total land are found to be correlated with MB-based EE. The results confirm the presence of a trade-off between MB-based EE and cost allocative efficiency and this finding, favouring policy interventions to help farms simultaneously achieve cost efficiency and MP-based EE.

A basis for inquiry into policy considerations for increasing the application of biophilic urbanism

Urban design that harnesses natural features (such as green roofs and green walls) to improve design outcomes is gaining significant interest, particularly as there is growing evidence of links between human health and wellbeing, and contact with nature. The use of such natural features can provide many significant benefits, such as reduced urban heat island effects, reduced peak energy demand for building cooling, enhanced stormwater attenuation and management, and reduced air pollution and greenhouse gas emissions. The principle of harnessing natural features as functional design elements, particularly in buildings, is becoming known as ‘biophilic urbanism’. Given the potential for global application and benefits for cities from biophilic urbanism, and the growing number of successful examples of this, it is timely to develop enabling policies that help overcome current barriers to implementation. This paper describes a basis for inquiry into policy considerations related to increasing the application of biophilic urbanism. The paper draws on research undertaken as part of the Sustainable Built Environment National Research Centre (SBEnrc) In Australia in partnership with the Western Australian Department of Finance, Parsons Brinckerhoff, Green Roofs Australasia, and Townsville City Council (CitySolar Program). The paper discusses the emergence of a qualitative, mixed-method approach that combines an extensive literature review, stakeholder workshops and interviews, and a detailed study of leading case studies. It highlights the importance of experiential and contextual learnings to inform biophilic urbanism and provides a structure to distil such learnings to benefit other applications.

Optical techniques for real-time binary multiplication

An optical system which performs the multiplication of binary numbers is described and proof-of-principle experiments are performed. The simultaneous generation of all partial products, optical regrouping of bit products, and optical carry look-ahead addition are novel features of the proposed scheme which takes advantage of the parallel operations capability of optical computers. The proposed processor uses liquid crystal light valves (LCLVs). By space-sharing the LCLVs one such system could function as an array of multipliers. Together with the optical carry look-ahead adders described, this would constitute an optical matrix-vector multiplier.

Mapping quantitative trait loci in a wild population using linkage and linkage disequilibrium analyses

Historical information can be used, in addition to pedigree, traits and genotypes, to map quantitative trait locus (QTL) in general populations via maximum likelihood estimation of variance components. This analysis is known as linkage disequilibrium (LD) and linkage mapping, because it exploits both linkage in families and LD at the population level. The search for QTL in the wild population of Soay sheep on St. Kilda is a proof of principle. We analysed the data from a previous study and confirmed some of the QTLs reported. The most striking result was the confirmation of a QTL affecting birth weight that had been reported using association tests but not when using linkage-based analyses. Copyright © Cambridge University Press 2010.

The political economy of food in schools : the case of Queensland State education

Food in schools is typically understood from a biomedical perspective. At practical, ideational and material levels, whether addressed pedagogically or bureaucratically, food in schools is generally considered from a natural sciences perspective. This perspective manifests as the bioenergetic principle of energy in versus energy out and appears in policy focused on issues such as obesity and physical activity. Despite the considerable literature on the sociology of food and eating, little is understood about food in schools from a sociological perspective. This oversight of one of the most fundamental requirements of the human condition--namely, food--should be of concern for educators. Investigating food through a political economy lens means understanding food in schools as part of broader economic, political, social and cultural conditions. Hence, a political economy of food and schooling is concerned with the formation of ideas about food relative to political, economic, and cultural ideologies in social practice. From a critical sociology study of food messages students receive in the primary school curriculum, this paper reports on some of the official food messages of an Australian state's education policy, as a case to highlight the current political economy of food in Australia. It examines the role of the corporate food industry in the formation of Australian food policy and how that policy created artefacts infused with competing messages. The paper highlights how food and nutrition policy moved from solely a health concern to incorporate an economic dimension and links that shift with the quality of food available in Queensland schools.

The new normativity : the innovation imperative

At a quite fundamental level, the very way in which Public Service Broadcasting (PSB) may envisage its future usually captured in the semantic shift from PSB to Public Service Media (PSM) is at stake when considering the recent history of public value discourse and the public value test. The core Reithian PSB idea assumed that public value would be created through the application of core principles of universality of availability and appeal, provision for minorities, education of the public, distance from vested interests, quality programming standards, program maker independence, and fostering of national culture and the public sphere. On the other hand, the philosophical import of the public value test is that potentially any excursion into the provision of new media services needs to be justified ex ante. In this era of New Public Management, greater transparency and accountability, and the proposition that resources for public value deliverables be contestable and not sequestered in public sector institutions, what might be the new Archimedean point around which a contemporised normativity for PSM be built? This paper will argue for the innovation imperative as an organising principle for contemporary PSM. This may appear counterintuitive, as it is precisely PSB’s predilection for innovating in new media services (in online, mobile, and social media) that has produced the constraining apparatus of the ex ante/public value/Drei-Stufen-Test in Europe, based on principles of competitive neutrality and transparency in the application of public funds for defined and limited public benefit. However, I argue that a commitment to innovation can define as complementary to, rather than as competitive ‘crowding out’, the new products and services that PSM can, and should, be delivering into a post-scarcity, superabundant all-media marketplace. The evidence presented in this paper for this argument is derived mostly from analysis of PSM in the Australian media ecology. While no PSB outside Europe is subject to a formal public value test, the crowding out arguments are certainly run in Australia, particularly by powerful commercial interests for whom free news is a threat to monetising quality news journalism. Take right wing opinion leader, herself a former ABC Board member, Judith Sloan: ‘… the recent expansive nature of the ABC – all those television stations, radio stations and online offerings – is actually squeezing activity that would otherwise be undertaken by the private sector. From partly correcting market failure, the ABC is now causing it. We are now dealing with a case of unfair competition and wasted taxpayer funds’ (The Drum, 1 August http://www.abc.net.au/unleashed/2818220.html). But I argue that the crowding out argument is difficult to sustain in Australia because of the PSB’s non-dominant position and the fact that much of innovation generated by the two PSBs, the ABC and the SBS, has not been imitated by or competed for by the commercials. The paper will bring cases forward, such as SBS’ Go Back to Where you Came From (2011) as an example of product innovation, and a case study of process and organisational innovation which also has resulted in specific product and service innovation – the ABC’s Innovation Unit. In summary, at least some of the old Reithian dicta, along with spectrum scarcity and market failure arguments, have faded or are fading. Contemporary PSM need to justify their role in the system, and to society, in terms of innovation.

Practice and Procedure : UCPR r 7 - power to extend time

In McIntosh & Anor as Trustees of the Estate of Camm (A Bankrupt) v Linke Nominees Pty Ltd & Anor [2008] QCA 410 the Queensland Court of Appeal considered the extent of the court’s power under r 7(1) of the Uniform Civil Procedure Rules 1999 (Qld) (“UCPR”) to extend time, and in particular whether the rule applied so as to permit extension of the period specified under rule 667 for varying or setting aside an order. The case also provides an illustration of circumstances in which the court might be expected to depart from the general principle that a successful litigant is entitled to the costs of the litigation.

Hybrid graphene/titania nanocomposite : interface charge transfer, hole doping, and sensitization for visible light response

We demonstrated for the first time by large-scale ab initio calculations that a graphene/titania interface in the ground electronic state forms a charge-transfer complex due to the large difference of work functions between graphene and titania, leading to substantial hole doping in graphene. Interestingly, electrons in the upper valence band can be directly excited from graphene to the conduction band, that is, the 3d orbitals of titania, under visible light irradiation. This should yield well-separated electron−hole pairs, with potentially high photocatalytic or photovoltaic performance in hybrid graphene and titania nanocomposites. Experimental wavelength-dependent photocurrent generation of the graphene/titania photoanode demonstrated noticeable visible light response and evidently verified our ab initio prediction.

Review article : paramedic education opportunities and challenges in Australia

Paramedic education has been undergoing major development in Australia in the past 20 years, with many different educational programmes being developed across all Australian jurisdictions. This paper aims to review the current paramedic education programmes in Australia to identify the similarities and differences between the programmes, and the strengths and challenges in these programmes. A literature search was performed using six scientific databases to identify any systematic reviews, literature reviews or relevant articles on the topic. Additional searches included journal articles and text references from 1995 to 2011. The search was conducted during December 2010 and November 2011. Included in this review are a total of 28 articles, which are focused around five major issues in paramedic education: (i) principle on paramedic programmes and the involvement of industry partners; (ii) clinical placements; (iii) contemporary methods of education; (iv) needs for specific programmes within paramedic education; and (v) articles related to the accreditation process for paramedic programmes. Paramedic programmes across Australian universities vary with many different practices, especially relating to clinical placements in the field. The further advances of the paramedic education programmes should aim to respond to population change and industry development, which would enhance the paramedic profession across Australia.

Sex discrimination and non-random sampling in the Australian labour market

Historically a significant gap between male and female wages has existed in the Australian labour market. Indeed this wage differential was institutionalised in the 1912 arbitration decision which determined that the basic female wage would be set at between 54 and 66 per cent of the male wage. More recently however, the 1969 and 1972 Equal Pay Cases determined that male/female wage relativities should be based upon the premise of equal pay for work of equal value. It is important to note that the mere observation that average wages differ between males and females is not sine qua non evidence of sex discrimination. Economists restrict the definition of wage discrimination to cases where two distinct groups receive different average remuneration for reasons unrelated to differences in productivity characteristics. This paper extends previous studies of wage discrimination in Australia (Chapman and Mulvey, 1986; Haig, 1982) by correcting the estimated male/female wage differential for the existence of non-random sampling. Previous Australian estimates of male/female human capital basedwage specifications together with estimates of the corresponding wage differential all suffer from a failure to address this issue. If the sample of females observed to be working does not represent a random sample then the estimates of the male/female wage differential will be both biased and inconsistent.

Reconceptualising policy integration in road safety management

Unless sustained, coordinated action is generated in road safety, road traffic deaths are poised to rise from approximately 1.3 to 1.9 million a year by 2020 (Krug, 2012). To generate this harmonised response, road safety management agencies are being urged to adopt multisectoral collaboration (WHO, 2009b), which is achievable through the principle of policy integration. Yet policy integration, in its current hierarchical format, is marred by a lack of universality of its interpretation, a failure to anticipate the complexities of coordinated effort, dearth of information about its design and the absence of a normative perspective to share responsibility. This paper addresses this ill-conception of policy integration by reconceptualising it through a qualitative examination of 16 road safety stakeholders’ written submissions, lodged with the Australian Transport Council in 2011. The resulting, new principle of policy integration, Participatory Deliberative Integration, provides a conceptual framework for the alignment of effort across stakeholders in transport, health, traffic law enforcement, relevant trades and the community. With the adoption of Participatory Deliberative Integration, road safety management agencies should secure the commitment of key stakeholders in the development and implementation of, amongst other policy measures, National Road Safety Strategies and Mix Mode Integrated Timetabling.

Molecular dynamics simulation of fracture strength and morphology of defective graphene

Different types of defects can be introduced into graphene during material synthesis, and significantly influence the properties of graphene. In this work, we investigated the effects of structural defects, edge functionalisation and reconstruction on the fracture strength and morphology of graphene by molecular dynamics simulations. The minimum energy path analysis was conducted to investigate the formation of Stone-Wales defects. We also employed out-of-plane perturbation and energy minimization principle to study the possi-ble morphology of graphene nanoribbons with edge-termination. Our numerical results show that the fracture strength of graphene is dependent on defects and environmental temperature. However, pre-existing defects may be healed, resulting in strength recovery. Edge functionalization can induce compressive stress and ripples in the edge areas of gra-phene nanoribbons. On the other hand, edge reconstruction contributed to the tensile stress and curved shape in the graphene nanoribbons.

Delphi study for improving sustainable construction project management in universities

As sustainability becomes an important principle guiding various human activities around the globe, the higher education sector is being asked to take an active part in educating and promoting sustainability due to its moral responsibility, social obligation and its own needs to adapt to new circumstances. There is a global trend of higher education institutions embarking on responses to the sustainability challenge. On-campus building performance is one of the most important indicators for “sustainable universities”, because buildings carry substantially environmental burden such as considerable consumption of raw materials and energy as well as huge amount of waste generation and greenhouse gas emission. Plus, much research proves that building performance can impact on students and staff’s awareness about and behaviours related to sustainability. The past studies rarely discussed about sustainable construction projects in universities’ unique context. Universities are labeled with distinct characteristics such as complex governance, multiple cultures and juggling missions and so on. It is necessary and meaningful to examine the project management system in terms of universities’ organizational environment. Thus, this research project applies Delphi study to identify primary barriers to green technology application in on-campus buildings, critical factors for sustainable project success, key actions in project phases and strategies for project improvement. Through three rounds of questionnaires among panel experts, the authors obtain a profound understanding of project delivery system in universities. The research results are expected to provide sustainability practitioners with holistic understanding and generic information about sustainable construction project performance on campus as an assistance tool.