Simulating droplet motion on virtual leaf surfaces

A curvilinear thin film model is used to simulate the motion of droplets on a virtual leaf surface, with a view to better understand the retention of agricultural sprays on plants. The governing model, adapted from Roy et al. (2002 J. Fluid Mech. 454, 235–261) with the addition of a disjoining pressure term, describes the gravity- and curvature driven flow of a small droplet on a complex substrate: a cotton leaf reconstructed from digitized scan data. Coalescence is the key mechanism behind spray coating of foliage, and our simulations demonstrate that various experimentally observed coalescence behaviours can be reproduced qualitatively. By varying the contact angle over the domain, we also demonstrate that the presence of a chemical defect can act as an obstacle to the droplet’s path, causing break-up. In simulations on the virtual leaf, it is found that the movement of a typical spray size droplet is driven almost exclusively by substrate curvature gradients. It is not until droplet mass is sufficiently increased via coalescence that gravity becomes the dominating force.

A virtual environment for medical radiation collaborative learning

Asoftware-based environment was developed to provide practical training in medical radiation principles and safety. The Virtual Radiation Laboratory application allowed students to conduct virtual experiments using simulated diagnostic and radiotherapy X-ray generators. The experiments were designed to teach students about the inverse square law, half value layer and radiation protection measures and utilised genuine clinical and experimental data. Evaluation of the application was conducted in order to ascertain the impact of the software on students’ understanding, satisfaction and collaborative learning skills and also to determine potential further improvements to the software and guidelines for its continued use. Feedback was gathered via an anonymous online survey consisting of a mixture of Likert-style questions and short answer open questions. Student feedback was highly positive with 80 % of students reporting increased understanding of radiation protection principles. Furthermore 72 % enjoyed using the software and 87 %of students felt that the project facilitated collaboration within small groups. The main themes arising in the qualitative feedback comments related to efficiency and effectiveness of teaching, safety of environment, collaboration and realism. Staff and students both report gains in efficiency and effectiveness associated with the virtual experiments. In addition students particularly value the visualisation of ‘‘invisible’’ physical principles and increased opportunity for experimentation and collaborative problembased learning. Similar ventures will benefit from adopting an approach that allows for individual experimentation while visualizing challenging concepts.

The development of virtual leaf surface models for interactive agrichemical spray applications

This project constructed virtual plant leaf surfaces from digitised data sets for use in droplet spray models. Digitisation techniques for obtaining data sets for cotton, chenopodium and wheat leaves are discussed and novel algorithms for the reconstruction of the leaves from these three plant species are developed. The reconstructed leaf surfaces are included into agricultural droplet spray models to investigate the effect of the nozzle and spray formulation combination on the proportion of spray retained by the plant. A numerical study of the post-impaction motion of large droplets that have formed on the leaf surface is also considered.

Efectividad clínica de la intervención terapéutica sobre la mano con realidad virtual en sujetos hemipléjicos: revisión sistemática

Objetivo Revisar de forma sistemática y realizar una evaluación critica de las diferentes publicaciones existentes sobre el uso de la realidad virtual como elemento rehabilitador en la mano. Estrategias de búsqueda Se ha realizado una búsqueda en la base de datos Medline completada con búsquedas en Google Schoolar. Se ha limitado la búsqueda a 10 años de extensión, idiomas: inglés y español. Selección de estudios: se ha centrado sobre aquellos artículos relacionados con la realidad virtual y la rehabilitación funcional de la mano en el accidente cerebrovascular. Síntesis de resultados Debido a la falta de homogeneidad, no ha sido posible evaluar metodológicamente mediante instrumento Caspe. Se detectaron 200 artículos de los cuales 12 cumplen los criterios de selección de los mismos. Dichos artículos han sido agrupados en relación con diferentes criterios como son: tipo de estudio, sistema de evaluación utilizado, periféricos usados o resultados obtenidos entre otros. Conclusiones No se ha obtenido una homogeneidad conjunta sobre los artículos, por ello se debe continuar realizando avances en este ámbito. A pesar de ello, los entornos de realidad virtual pueden ser un instrumento válido para la recuperación funcional de la mano en los accidentes cerebrovasculares, no siendo aptos como elemento único rehabilitador. Abstract in English Objective To make a systematic review and critical assessment of the different existing publications on the use of virtual reality as an element in rehabilitation of the hand. Search Method A search was made in the Medline database completed with searches in Google Schoolar. The search was limited to a period of ten years, and English and Spanish languages. Study selection The study was focused on those articles related to virtual reality and the functional rehabilitation of the hand in stroke. Synthesis of results It was not possible to perform a methodological evaluation using the Caspe instrument due to lack of homogeneity. Two hundred 200 articles were found. Of these, 12 met the criteria for their selection. These articles were grouped in relation to different criteria such as: type of study, assessment system used, hardware used or outcomes results obtained, among others. Conclusions Joint homogeneity was not obtained for the articles. Therefore, progress must still be made in this area. In spite of this, virtual reality environments can be a valid tool for functional recovery of the hand in strokes but they are not adequate for use as a single rehabilitative treatment element.

Virtual community, purchasing behaviour, and emotional well-being

The benefits of virtual communities in increasing firms' profits, instilling knowledge in consumers, and enhancing consumers' social experience and enjoyment are widely recognised. However, relatively little is known about how the use of a virtual community could influence consumers' emotional well-being. This study examines the relationships among virtual community features (structural and experiential routes) as antecedents of virtual community engagement, including quality of use of virtual communities (time spent online and level of information exchange), electronic word-of-mouth (eWOM) purchasing behaviour, and consumers' emotional experience. Furthermore, by extending the cultural perspective to virtual community engagement, this study examines the role of collectivistic values on the aforementioned relationships. The proposed hypotheses are tested on the basis of data collected from 286 members of different virtual communities in Taiwan. The results partially support the theory that features of virtual communities influenced the quality of use, which then has a subsequent effect on consumer eWOM purchasing and emotional well-being. The results of the empirical analysis add credence to the proposed relationships. The role of collectivistic values is also partially supported. A detailed discussion of the findings and limitations of this study is provided.

Tracking the neoliberal juggernaut: A virtual edition

This is an editorial introduction for a virtual edition focused on neoliberalism in educational sectors for the journal, "Critical Studies in Education". The introduction outlines the nature and progress of neoliberalism, then reviews the selected articles from the journal's archives.

Virtual countries: Internet domain names and geographical terms

This paper examines the dispute between the Seattle company Virtual Countries Inc. and the Republic of South Africa over the ownership of the domain name address southafrica.com. The first part of the paper deals with the pre-emptive litigation taken by Virtual Countries Inc. in a District Court of the United States. The second part considers the possible arbitration of the dispute under the Uniform Domain Name Dispute Resolution Process of the Internet Corporation for Assigned Names and Numbers (ICANN) and examines the wider implications of this dispute for the jurisdiction and the governance of ICANN. The final section of the paper evaluates the Final Report of the Second WIPO Internet Domain Name Process.

Using genetic algorithm in profile-based assignment of applications to virtual machines for greener data centers

The increase in data center dependent services has made energy optimization of data centers one of the most exigent challenges in today's Information Age. The necessity of green and energy-efficient measures is very high for reducing carbon footprint and exorbitant energy costs. However, inefficient application management of data centers results in high energy consumption and low resource utilization efficiency. Unfortunately, in most cases, deploying an energy-efficient application management solution inevitably degrades the resource utilization efficiency of the data centers. To address this problem, a Penalty-based Genetic Algorithm (GA) is presented in this paper to solve a defined profile-based application assignment problem whilst maintaining a trade-off between the power consumption performance and resource utilization performance. Case studies show that the penalty-based GA is highly scalable and provides 16% to 32% better solutions than a greedy algorithm.

A virtual radiation therapy workflow training simulation

Aim Simulation forms an increasingly vital component of clinical skills development in a wide range of professional disciplines. Simulation of clinical techniques and equipment is designed to better prepare students for placement by providing an opportunity to learn technical skills in a “safe” academic environment. In radiotherapy training over the last decade or so this has predominantly comprised treatment planning software and small ancillary equipment such as mould room apparatus. Recent virtual reality developments have dramatically changed this approach. Innovative new simulation applications and file processing and interrogation software have helped to fill in the gaps to provide a streamlined virtual workflow solution. This paper outlines the innovations that have enabled this, along with an evaluation of the impact on students and educators. Method Virtual reality software and workflow applications have been developed to enable the following steps of radiation therapy to be simulated in an academic environment: CT scanning using a 3D virtual CT scanner simulation; batch CT duplication; treatment planning; 3D plan evaluation using a virtual linear accelerator; quantitative plan assessment, patient setup with lasers; and image guided radiotherapy software. Results Evaluation of the impact of the virtual reality workflow system highlighted substantial time saving for academic staff as well as positive feedback from students relating to preparation for clinical placements. Students valued practice in the “safe” environment and the opportunity to understand the clinical workflow ahead of clinical department experience. Conclusion Simulation of most of the radiation therapy workflow and tasks is feasible using a raft of virtual reality simulation applications and supporting software. Benefits of this approach include time-saving, embedding of a case-study based approach, increased student confidence, and optimal use of the clinical environment. Ongoing work seeks to determine the impact of simulation on clinical skills.

A penalty-based genetic algorithm for the migration cost-aware virtual machine placement problem in cloud data centers

In the past few years, the virtual machine (VM) placement problem has been studied intensively and many algorithms for the VM placement problem have been proposed. However, those proposed VM placement algorithms have not been widely used in today's cloud data centers as they do not consider the migration cost from current VM placement to the new optimal VM placement. As a result, the gain from optimizing VM placement may be less than the loss of the migration cost from current VM placement to the new VM placement. To address this issue, this paper presents a penalty-based genetic algorithm (GA) for the VM placement problem that considers the migration cost in addition to the energy-consumption of the new VM placement and the total inter-VM traffic flow in the new VM placement. The GA has been implemented and evaluated by experiments, and the experimental results show that the GA outperforms two well known algorithms for the VM placement problem.

A Strength Pareto Evolutionary Algorithm for live migration of multiple interdependent virtual machines in data centers

Although live VM migration has been intensively studied, the problem of live migration of multiple interdependent VMs has hardly been investigated. The most important problem in the live migration of multiple interdependent VMs is how to schedule VM migrations as the schedule will directly affect the total migration time and the total downtime of those VMs. Aiming at minimizing both the total migration time and the total downtime simultaneously, this paper presents a Strength Pareto Evolutionary Algorithm 2 (SPEA2) for the multi-VM migration scheduling problem. The SPEA2 has been evaluated by experiments, and the experimental results show that the SPEA2 can generate a set of VM migration schedules with a shorter total migration time and a shorter total downtime than an existing genetic algorithm, namely Random Key Genetic Algorithm (RKGA). This paper also studies the scalability of the SPEA2.

Expectation and variation with a virtual die

By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the advantage they offer is a familiar context within which to explore much more complex concepts. If the basic chance mechanism of the device is understood, it is possible to enter quickly into an arena of more complex concepts. This is what happened with a two hour activity engaged in by four classes of Grade 6 students in the same school. The activity targeted the concepts of variation and expectation. The teachers held extended discussions with their classes on variation and expectation at the beginning of the activity, with students contributing examples of the two concepts from their own experience. These notions are quite sophisticated for Grade 6, but the underlying concepts describe phenomena that students encounter every day. For example, time varies continuously; sporting results vary from game to game; the maximum temperature varies from day to day. However, there is an expectation about tomorrow’s maximum temperature based on the expert advice from the weather bureau. There may also be an expectation about a sporting result based on the participants’ previous results. It is this juxtaposition that makes life interesting. Variation hence describes the differences we see in phenomena around us. In a scenario displaying variation, expectation describes the effort to characterise or summarise the variation and perhaps make a prediction about the message arising from the scenario. The explicit purpose of the activity described here was to use the familiar scenario of rolling a die to expose these two concepts. Because the students had previously experienced rolling physical dice they knew instinctively about the variation that occurs across many rolls and about the theoretical expectation that each side should “come up” one-sixth of the time. They had observed the instances of the concepts in action, but had not consolidated the underlying terminology to describe it. As the two concepts are so fundamental to understanding statistics, we felt it would be useful to begin building in the familiar environment of rolling a die. Because hand-held dice limit the explorations students can undertake, the classes used the soft-ware TinkerPlots (Konold & Miller, 2011) to simulate rolling a die multiple times.

A CCG virtual system for big data application communication costs analysis

Network topology and routing are two important factors in determining the communication costs of big data applications at large scale. As for a given Cluster, Cloud, or Grid system, the network topology is fixed and static or dynamic routing protocols are preinstalled to direct the network traffic. Users cannot change them once the system is deployed. Hence, it is hard for application developers to identify the optimal network topology and routing algorithm for their applications with distinct communication patterns. In this study, we design a CCG virtual system (CCGVS), which first uses container-based virtualization to allow users to create a farm of lightweight virtual machines on a single host. Then, it uses software-defined networking (SDN) technique to control the network traffic among these virtual machines. Users can change the network topology and control the network traffic programmingly, thereby enabling application developers to evaluate their applications on the same system with different network topologies and routing algorithms. The preliminary experimental results through both synthetic big data programs and NPB benchmarks have shown that CCGVS can represent application performance variations caused by network topology and routing algorithm.

Collaborative learning from distributed places and spaces: Exploring the use of virtual collaborative tools for local and global student teamwork projects

Educating responsive graduates. Graduate competencies include reliability, communication skills and ability to work in teams. Students using Collaborative technologies adapt to a new working environment, working in teams and using collaborative technologies for learning. Collaborative Technologies were used not simply for delivery of learning but innovatively to supplement and enrich research-based learning, providing a space for active engagement and interaction with resources and team. This promotes the development of responsive ‘intellectual producers’, able to effectively communicate, collaborate and negotiate in complex work environments. Exploiting technologies. Students use ‘new’ technologies to work collaboratively, allowing them to experience the reality of distributed workplaces incorporating both flexibility and ‘real’ time responsiveness. Students are responsible and accountable for individual and group work contributions in a highly transparent and readily accessible workspace. This experience provides a model of an effective learning tool. Navigating uncertainty and complexity. Collaborative technologies allows students to develop critical thinking and reflective skills as they develop a group product. In this forum students build resilience by taking ownership and managing group work, and navigating the uncertainties and complexities of group dynamics as they constructively and professionally engage in team dialogue and learn to focus on the goal of the team task.

R U there yet? using virtual classrooms to transform teaching practice

Access to quality higher education is challenging for many Western Australians that live outside the metropolitan area. In 2010, the School of Education moved to flexible delivery of a fully online Bachelor of Education degree for their non -metropolitan students. The new model of delivery allows access for students from any location provided they have a computer and an internet connection. A number of academic staff had previously used an asynchronous environment to deliver learning modules housed within a learning management system (LMS) but had not used synchronous software with their students. To enhance the learning environment and to provide high quality learning experiences to students learning at a distance, the adoption of synchronous software (Elluminate Live) was introduced. This software is a real-time virtual classroom environment that allows for communication through Voice over Internet Protocol (VoIP) and videoconferencing, along with a large number of collaboration tools to engage learners. This research paper reports on the integration of a live e-learning solution into the current LMS environment. Qualitative data were collected from academic staff through informal interviews and participant observation. The findings discuss (i) perceived level of support; (ii) identification of strategies used to create an effective online teacher presence; (iii) the perceived impact on the students' learning outcomes; and (iv) guidelines for professional development to enhance pedagogy within the live e-learning environment.