Predicting employee intentions to support organizational change : an examination of identification processes during a re-brand

This study examined if organizational identification can account for the mechanisms by which two-change management practices (communication and participation) influence employees’ intentions to support change. The context was a sample of 82 hotel employees in the early stages of a re-brand. Identification with the new hotel fully mediated the relationship between communication and adaptive and proactive intentions to support change, as well as between participation and proactive intentions.

Free convection heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure

A numerical investigation has been carried out for the coupled thermal boundary layers on both sides of a partition placed in an isosceles triangular enclosure along its middle symmetric line. The working fluid is considered as air which is initially quiescent. A sudden temperature difference between two zones of the enclosure has been imposed to trigger the natural convection. It is anticipated from the numerical simulations that the coupled thermal boundary layers development adjacent to the partition undergoes three distinct stages; namely an initial stage, a transitional stage and a steady state stage. Time dependent features of the coupled thermal boundary layers as well as the overall natural convection flow in the partitioned enclosure have been discussed and compared with the non-partitioned enclosure. Moreover, heat transfer as a form of local and overall average Nusselt number through the coupled thermal boundary layers and the inclined walls is also examined. The details results will be discussed in the full paper.

Transferring knowledge through peer-reviewed assessment : the creation of a community of practice and the threats to its survival

While it is generally accepted in the learning and teaching literature that assessment is the single biggest influence on how students approach their learning, assessment methods within higher education are generally conservative and inflexible. Constrained by policy and accreditation requirements and the need for the explicit articulation of assessment standards for public accountability purposes, assessment tasks can fail to engage students or reflect the tasks students will face in the world of practice. Innovative assessment design can simultaneously deliver program objectives and active learning through a knowledge transfer process which increases student participation. This social constructivist view highlights that acquiring an understanding of assessment processes, criteria and standards needs active student participation. Within this context, a peer-assessed, weekly, assessment task was introduced in the first “serious” accounting subject offered as part of an undergraduate degree. The positive outcomes of this assessment innovation was that student failure rates declined 15%, tutorial participation increased fourfold, tutorial engagement increased six-fold and there was a 100% approval rating for the retention of the assessment task. In contributing to the core conference theme of “seismic” shifts within higher education, in stark contrast to the positive student response, staff-related issues of assessment conservatism and the necessity of meeting increasing research commitments, threatened the assessment task’s survival. These opposing forces to change have the potential to weaken the ability of higher education assessment arrangements to adequately serve either a new generation of students or the sector's community stakeholders.

Transferring knowledge through peer-reviewed assessment : the creation of a community of practice and the threats to its survival

While it is generally accepted in the learning and teaching literature that assessment is the single biggest influence on how students approach their learning, assessment methods within higher education are generally conservative and inflexible. Constrained by policy and accreditation requirements and the need for the explicit articulation of assessment standards for public accountability purposes, assessment tasks can fail to engage students or reflect the tasks students will face in the world of practice. Innovative assessment design can simultaneously deliver program objectives and active learning through a knowledge transfer process which increases student participation. This social constructivist view highlights that acquiring an understanding of assessment processes, criteria and standards needs active student participation. Within this context, a peer-assessed, weekly, assessment task was introduced in the first “serious” accounting subject offered as part of an undergraduate degree. The positive outcomes of this assessment innovation was that student failure rates declined 15%, tutorial participation increased fourfold, tutorial engagement increased six-fold and there was a 100% approval rating for the retention of the assessment task. In contributing to the core conference theme of “seismic” shifts within higher education, in stark contrast to the positive student response, staff-related issues of assessment conservatism and the necessity of meeting increasing research commitments, threatened the assessment task’s survival. These opposing forces to change have the potential to weaken the ability of higher education assessment arrangements to adequately serve either a new generation of students or the sector's community stakeholders.

Introductions to the profession : curricular approach

In 2008, extra-curricular career development programs developed for psychology undergraduates at the Queensland University of Technology were incorporated into the formal curriculum. While a whole of course approach has been adopted, this session will explore the impact of a new introductory unit, Psychology in Professional Contexts, which adopts a constructivist approach to student career exploration. First-year students are introduced to key theories, models, and processes of career development, and the diversity of contexts in which their psychological knowledge can be applied, while developing and highlighting the value of important generic abilities such as critical thinking, team communication, critical reflection, and information literacy. Materials are drawn from the media, guest speakers’ professional profiles, the students’ own experiences, and traditional and emerging areas of psychology. Assessment and learning activities involve case analysis, problem-based learning, and discussion-based classes. The content of these professional development classes is also aligned with that of the core discipline units studied concurrently, to encourage the transfer of career development skills and knowledge across the psychology curriculum. This presentation will focus on 4 years of curriculum development in Psychology in Professional Contexts, and discuss changes initiated in 2011 which incorporate interactive online environments and extend the role of problem-based learning.

Control, performance management systems and identification processes

Is it possible to control identities using performance management systems (PMSs)? This paper explores the theoretical fusion of management accounting and identity studies, providing a synthesised view of control, PMSs and identification processes. It argues that the effective use of PMSs generates a range of obtrusive mechanistic and unobtrusive organic controls that mediate identification processes to achieve a high level of identity congruency between individuals and collectives—groups and organisations. This paper contends that mechanistic control of PMSs provides sensebreaking effects and also creates structural conditions for sensegiving in top-down identification processes. These processes encourage individuals to continue the bottom-up processes of sensemaking, enacting identity and constructing identity narratives. Over time, PMS activities and conversations periodically mediate several episode(s) of identification to connect past, current and future identities. To explore this relationship, the dual locus of control—collectives and individuals—is emphasised to explicate their interplay. This multidisciplinary approach contributes to explaining the multidirectional effects of PMSs in obtrusive as well as unobtrusive ways, in order to control the nature of collectives and individuals in organisations.

Control, performance management system and identification processes

Is it possible to control identities using performance management systems (PMSs)? This paper explores the theoretical fusion of management accounting and identity studies, providing a synthesised view of control, PMSs and identification processes. It argues that the effective use of PMSs generates a range of obtrusive mechanistic and unobtrusive organic controls that mediate identification processes to achieve a high level of identity congruency between individuals and collectives—groups and organisations. This paper contends that mechanistic control of PMSs provides sensebreaking effects and also creates structural conditions for sensegiving in top-down identification processes. These processes encourage individuals to continue the bottom-up processes of sensemaking, enacting identity and constructing identity narratives. Over time, PMS activities and conversations periodically mediate several episode(s) of identification to connect past, current and future identities. To explore this relationship, the dual locus of control—collectives and individuals—is emphasised to explicate their interplay. This multidisciplinary approach contributes to explaining the multidirectional effects of PMSs in obtrusive as well as unobtrusive ways, in order to control the nature of collectives and individuals in organisations.

Problematising the processes of participation in networks : working through the rhetoric

Participation in networks, both as a concept and process, is widely supported in environmental education as a democratic and equitable pathway to individual and social change for sustainability. However, the processes of participation in networks are rarely problematized. Rather, it is assumed that we inherently know how to participate in networks. This assumption means that participation is seldom questioned. Underlying support for participation in networks is a belief that it allows individuals to connect in new and meaningful ways, that individuals can engage in making decisions and in bringing about change in arenas that affect them, and that they will be engaging in new, non-hierarchical and equitable relationships. In this paper we problematize participation in networks. As an example we use research into a decentralized network – described as such in its own literature - the Queensland Environmentally Sustainable Schools Initiative Alliance in Australia – to argue that while network participants were engaged and committed to participation in this network, 'old' forms of top-down engagement and relationships needed to be unlearnt. This paper thus proposes that for participation in decentralized networks to be meaningful, new learning about how to participate needs to occur.

Arc voltage behavior in GMAW-P under different drop transfer modes

Purpose: Experimental measurements have been made to investigate meaning of the change in voltage for the pulse gas metal arc welding (GMAW-P) process operating under different drop transfer modes. Design/methodology/approach: Welding experiments with different values of pulsing parameter and simultaneous recording of high speed camera pictures and welding signals (such as current and voltage) were used to identify different drop transfer modes in GMAW-P. The investigation is based on the synchronization of welding signals and high speed camera to study the behaviour of voltage signal under different drop transfer modes. Findings: The results reveal that the welding arc is significantly affected by the molten droplet detachment. In fact, results indicate that sudden increase and drop in voltage just before and after the drop detachment can be used to characterize the voltage behaviour of different drop transfer mode in GMAW-P. Research limitations/implications: The results show that voltage signal carry rich information about different drop transfer occurring in GMAW-P. Hence it’s possible to detect different drop transfer modes. Future work should concentrate on development of filters for detection of different drop transfer modes. Originality/value: Determination of drop transfer mode with GMAW-P is crucial for the appropriate selection of pulse welding parameters. As change in drop transfer mode results in poor weld quality in GMAW-P, so in order to estimate the working parameters and ensure stable GMAW-P understanding the voltage behaviour of different drop transfer modes in GMAW-P will be useful. However, in case of GMAW-P hardly any attempt is made to analyse the behaviour of voltage signal for different drop transfer modes. This paper analyses the voltage signal behaviour of different drop transfer modes for GMAW-P.

Reflecting on the ‘Dream Circle’ : urban Indigenous education processes designed for student and community empowerment

The ‘Dream Circle’ is a space designed by and operated through Indigenous educator footprints as a safe space for the school’s deadly jarjums (Indigenous children). The ‘Dream Circle’ uses a kinnected methodology drawing on the rich vein of Murri cultural knowledges and Torres Strait Islander supports within the local community to provide a safe and supportive circle. The ‘Dream Circle’ operates on a school site in the Logan area as an after school homework and cultural studies class. The ‘Dream Circle’ embodies practices and ritualises processes which ensure cultural safety and integrity. In this way the ‘Dream Circle’ balances the measures that Sarra (2005) purports are the stronger, smarter realities needed for positive change in Indigenous education.

Technology transfer evaluation in the high technology industry : an interdisciplinary perspective

The underlying objective of this study was to develop a novel approach to evaluate the potential for commercialisation of a new technology. More specifically, this study examined the 'ex-ante'. evaluation of the technology transfer process. For this purpose, a technology originating from the high technology sector was used. The technology relates to the application of software for the detection of weak signals from space, which is an established method of signal processing in the field of radio astronomy. This technology has the potential to be used in commercial and industrial areas other than astronomy, such as detecting water leakages in pipes. Its applicability to detecting water leakage was chosen owing to several problems with detection in the industry as well as the impact it can have on saving water in the environment. This study, therefore, will demonstrate the importance of interdisciplinary technology transfer. The study employed both technical and business evaluation methods including laboratory experiments and the Delphi technique to address the research questions. There are several findings from this study. Firstly, scientific experiments were conducted and these resulted in a proof of concept stage of the chosen technology. Secondly, validation as well as refinement of criteria from literature that can be used for „ex-ante. evaluation of technology transfer has been undertaken. Additionally, after testing the chosen technology.s overall transfer potential using the modified set of criteria, it was found that the technology is still in its early stages and will require further development for it to be commercialised. Furthermore, a final evaluation framework was developed encompassing all the criteria found to be important. This framework can help in assessing the overall readiness of the technology for transfer as well as in recommending a viable mechanism for commercialisation. On the whole, the commercial potential of the chosen technology was tested through expert opinion, thereby focusing on the impact of a new technology and the feasibility of alternate applications and potential future applications.

Design and implementation of a virtual world training simulation of ICU first hour handover processes

Nursing training for an Intensive Care Unit (ICU) is a resource intensive process. High demands are made on staff, students and physical resources. Interactive, 3D computer simulations, known as virtual worlds, are increasingly being used to supplement training regimes in the health sciences; especially in areas such as complex hospital ward processes. Such worlds have been found to be very useful in maximising the utilisation of training resources. Our aim is to design and develop a novel virtual world application for teaching and training Intensive Care nurses in the approach and method for shift handover, to provide an independent, but rigorous approach to teaching these important skills. In this paper we present a virtual world simulator for students to practice key steps in handing over the 24/7 care requirements of intensive care patients during the commencing first hour of a shift. We describe the modelling process to provide a convincing interactive simulation of the handover steps involved. The virtual world provides a practice tool for students to test their analytical skills with scenarios previously provided by simple physical simulations, and live on the job training. Additional educational benefits include facilitation of remote learning, high flexibility in study hours and the automatic recording of a reviewable log from the session. To the best of our knowledge, we believe this is a novel and original application of virtual worlds to an ICU handover process. The major outcome of the work was a virtual world environment for training nurses in the shift handover process, designed and developed for use by postgraduate nurses in training.

Stability of hydrotalcites formed from Bayer refinery environmental control processes

Bauxite refinery residues (red mud) are derived from the Bayer process by the digestion of crushed bauxite in concentrated sodium hydroxide at elevated temperatures and pressures. This slurry residue, if untreated, is unsuitable for discharge directly into the environment and is usually stored in tailing dams. The liquid portion has the potential for discharge, but requires pre-treatment before this can occur. The seawater neutralisation treatment facilitates a significant reduction in pH and dissolved metal concentrations, through the precipitation of hydrotalcite-like compounds and some other Mg, Ca, and Al hydroxide and carbonate minerals. The hydrotalcite-like compounds, precipitated during seawater neutralisation, also remove a range of transition metals, oxy-anions and other anionic species through a combination of intercalation and adsorption reactions: smaller anions are intercalated into the hydrotalcite matrix, while larger molecules are adsorbed on the particle surfaces. A phenomenon known as ‘reversion’ can occur if the seawater neutralisation process is not properly controlled. Reversion causes an increase in the pH and dissolved impurity levels of the neutralised effluent, rendering it unsuitable for discharge. It is believed that slow dissolution of components of the red mud residue and compounds formed during the neutralisation process are responsible for reversion. This investigation looked at characterising natural hydrotalcite (Mg6Al2(OH)16(CO3)∙4H2O) and ‘Bayer’ hydrotalcite (synthesised using the seawater neutralisation process) using a variety of techniques including X-ray diffraction, infrared and Raman spectroscopy, and thermogravimetric analysis. This investigation showed that Bayer hydrotalcite is comprised of a mixture of 3:1 and 4:1 hydrotalcite structures and exhibited similar chemical characteristic to the 4:1 synthetic hydrotalcite. Hydrotalcite formed from the seawater neutralisation of Bauxite refinery residues has been found not to cause reversion. Other components in red mud were investigated to determine the cause of reversion and this investigation found three components that contributed to reversion: 1) tricalcium aluminate, 2) hydrocalumite and 3) calcium hydroxide. Increasing the amount of magnesium in the neutralisation process has been found to be successful in reducing reversion.

From supply to demand-driven opportunities : unravelling the role of the customer in opportunity identification processes

Successful identification and exploitation of opportunities has been an area of interest to many entrepreneurship researchers. Since Shane and Venkataraman’s seminal work (e.g. Shane and Venkataraman, 2000; Shane, 2000), several scholars have theorised on how firms identify, nurture and develop opportunities. The majority of this literature has been devoted to understanding how entrepreneurs search for new applications of their technological base or discover opportunities based on prior knowledge (Zahra, 2008; Sarasvathy et al., 2003). In particular, knowledge about potential customer needs and problems that may present opportunities is vital (Webb et al., 2010). Whereas the role of prior knowledge of customer problems (Shane, 2003; Shepherd and DeTienne, 2005) and positioning oneself in a so-called knowledge corridor (Fiet, 1996) has been researched, the role of opportunity characteristics and their interaction with customer-related mechanisms that facilitate and hinder opportunity identification has received scant attention.

Outdoor experiential training as a medium for the development of today’s leaders

Outdoor experiential training is often used for the enhancement of generalised workplace skills including those considered relevant for effective leadership. Traditionally, facilitation processes and strategies employed in outdoor experiential training have often relied on theories delivered as part of an outdoor leadership training program. This was premised on the assumption that skills and capabilities developed in such programs transfer to the mainstream business market. In this paper we present data from an International study on the characteristics of outdoor education professionals that adds further insights into the role that outdoor experiential training plays in the development of generic leadership characteristics. Outdoor leaders were found to characterise transformational leadership qualities and considered that the development of these qualities were directly linked to their outdoor experiential training.