Family coping: issues and challenges for cancer nursing

A large body of research now exists suggesting that families are dramatically affected by a diagnosis of cancer, and that they have a wide range of support needs. In particular, evidence suggests that the emotional strains of living with a family member who has cancer are an especially difficult coping challenge, and that such strains have a significant impact on the day-to-day lives of family members. Despite this evidence, there has been little analysis to date on the nature of the families' experience with cancer and what implications the unique features of family relationships and interactions in the context of cancer have for nursing practice. Some of these specific features of the families' experience with cancer are examined in this article. It is suggested that enormous scope exists for improving nurses' contribution to care for families of people with cancer. Specific recommendations for achieving such improvements include a critical review of the constraints that exist on efforts to care for families, and the development of approaches to care that appreciate the interconnectedness of family responses and the considerable needs of family members for emotional and practical support.

A family of Alltop functions that are EA-inequivalent to the cubic function

Sequences with optimal correlation properties are much sought after for applications in communication systems. In 1980, Alltop (\emph{IEEE Trans. Inf. Theory} 26(3):350-354, 1980) described a set of sequences based on a cubic function and showed that these sequences were optimal with respect to the known bounds on auto and crosscorrelation. Subsequently these sequences were used to construct mutually unbiased bases (MUBs), a structure of importance in quantum information theory. The key feature of this cubic function is that its difference function is a planar function. Functions with planar difference functions have been called \emph{Alltop functions}. This paper provides a new family of Alltop functions and establishes the use of Alltop functions for construction of sequence sets and MUBs.

A phylogenetic analysis and taxonomic revision of the oribatid mite family Malaconothridae (Acari: Oribatida), with new species of Tyrphonothrus and Malaconothrus from Australia

Hitherto, the Malaconothridae contained Malaconothrus Berlese, 1904 and Trimalaconothrus Berlese, 1916, defined by the possession of one pre-tarsal claw (monodactyly) or by three claws (tridactyly) respectively. However, monodactyly is a convergent apomorphy within the Oribatida and an unreliable character for a classification. Therefore we undertook a phylogenetic analysis of 102 species as the basis for a taxonomic review of the Malaconothridae. We identified two major clades, equivalent to the genera Tyrphonothrus Knülle, 1957 and Malaconothrus. These genera are redefined. Trimala-conothrus becomes the junior subjective synonym of Malaconothrus. Some 42 species of Trimalaconothrus are recom-bined to Malaconothrus and 15 species to Tyrphonothrus. Homonyms created by the recombinations are rectified. The replacement name M. hammerae nom. nov. is proposed for M. angulatus Hammer, 1958, the junior homonym of M. an-gulatus (Willmann, 1931) and the replacement name M. luxtoni nom. nov. is proposed for M. scutatus Luxton, 1987, the junior homonym of M. scutatus Mihelč ič, 1959. Trimalaconothrus iteratus Subías, 2004 is an unnecessary replacement name and is a junior objective synonym of Malaconothrus longirostrum (Hammer 1966). Malaconothrus praeoccupatus Subías, 2004 is a junior objective synonym of M. machadoi Balogh & Mahunka, 1969. Malaconothrus obsessus (Subías, 2004), an unnecessary replacement name for Trimalaconothrus albulus Hammer 1966 sensu Tseng 1982, becomes an available name for what is in fact a previously-undescribed species of Malaconothrus. We describe four new species of Tyrphonothrus: T. gnammaensis sp. nov. from Western Australia, T. gringai sp. nov. and T. maritimus sp. nov. from New South Wales, and T. taylori sp. nov. from Queensland. We describe six new species of Malaconothrus: M. beecroftensis sp. nov., M. darwini sp. nov. M. gundungurra sp. nov. and M. knuellei sp. nov. from New South Wales, M. jowettae sp. nov. from Norfolk Island, and M. talaitae sp. nov. from Victoria.

Genetic response to combined family selection for improved mean harvest weight in giant freshwater prawn (Macrobrachium rosenbergii) in Vietnam

We estimated genetic changes in body and carcass weight traits in a giant freshwater prawn (GFP) (Macrobrachium rosenbergii) population selected for increased body weight at harvest in Vietnam. The data set consisted of 18,387 individual body and 1730 carcass weight records, as well as full pedigree information collected over four generations. Average selection response (per generation) in body weight at harvest (transformed to square root) estimated as the difference between the Selection line and the Control group was 7.4% calculated from least squares mean (LSMs), 7.0% from estimated breeding values (EBVs) and 4.4% calculated from EBVs between two consecutive generations. Favorable correlated selection responses (estimated from LSMs) were found for other body traits including: total length, cephalothorax length, abdominal length, cephalothorax width, and abdominal width (12.1%, 14.5%, 10.4%, 15.5% and 13.3% over three selection generations, respectively). Data in the second generation of selection showed positive correlated responses for carcass weight traits including: abdominal weight, exoskeleton-off weight, and telson-off weight of 8.8%, 8.6% and 8.8%, respectively. We conclude that body weight at harvest responded well to the application of combined (between and within) family selection and correlated responses in carcass weight traits were favorable.

From production to purpose : using design led innovation to Build Strategic Potential in a Family-Owned SME

There is an evident need to develop the strategic capabilities of companies from within, to ensure competitive competence in a time where strategy is a necessity. This paper is based on the first 4 months of a longitudinal embedded case study of a family-owned Australian small to medium enterprise, in their journey towards design integration. The first author was embedded as a ‘Design Innovation Catalyst’ to collaborate on overcoming early barriers of strategic development, using design led innovation. Action research methodology, semi-structured interviews with seven out of eight employees and a reflective journal revealed the absence of a shared vision, conflicting drivers and a focus on operational efficiency rather than strategy. Through the Catalyst’s facilitation, a company vision, general awareness, practice and knowledge in strategic development have emerged as the first steps to generating strategic design competence within the firm.

Unpacking the opportunities for change within a family owned manufacturing sme : a design led innovation case study

This thesis explored how an Australian, family owned, manufacturing firm responded to a design led innovation approach as conducted by the action researcher. Specifically, it investigated the barriers and opportunities that arose within the firm when trying to affect change to drive innovation. In doing so, key opportunities were identified that could help the firm to integrate a design led approach and remain competitive within an increasingly accessible global marketplace.

A method of extracting switching loss from a high efficiency MOSFET based half bridge converter

The measurement of losses in high efficiency / high power converters is difficult. Measuring the losses directly from the difference between the input and output power results in large errors. Calorimetric methods are usually used to bypass this issue but introduce different problems, such as, long measurement times, limited power loss measurement range and/or large set up cost. In this paper the total losses of a converter are measured directly and switching losses are exacted. The measurements can be taken with only three multimeters and a current probe and a standard bench power supply. After acquiring two or three power loss versus output current sweeps, a series of curve fitting processes are applied and the switching losses extracted.

Timed Probabilistic Automaton : a bridge between Raven and Song Scope for automatic species recognition

Raven and Song Scope are two automated sound anal-ysis tools based on machine learning technique for en-vironmental monitoring. Many research works have been conducted upon them, however, no or rare explo-ration mentions about the performance and comparison between them. This paper investigates the comparisons from six aspects: theory, software interface, ease of use, detection targets, detection accuracy, and potential application. Through deep exploration one critical gap is identified that there is a lack of approach to detect both syllables and call structures, since Raven only aims to detect syllables while Song Scope targets call structures. Therefore, a Timed Probabilistic Automata (TPA) system is proposed which separates syllables first and clusters them into complex structures after.

A new method for quantifying the contribution of different critical agents on railway bridge deterioration

Railway Bridges deteriorate over time due to different critical factors including, flood, wind, earthquake, collision, and environment factors, such as corrosion, wear, termite attack, etc. In current practice, the contributions of the critical factors, towards the deterioration of railway bridges, which show their criticalities, are not appropriately taken into account. In this paper, a new method for quantifying the criticality of these factors will be introduced. The available knowledge as well as risk analyses conducted in different Australian standards and developed for bridge-design will be adopted. The analytic hierarchy process (AHP) is utilized for prioritising the factors. The method is used for synthetic rating of railway bridges developed by the authors of this paper. Enhancing the reliability of predicting the vulnerability of railway bridges to the critical factors, will be the significant achievement of this research.

Innovation in the road and bridge industry

This paper reviews innovation activity in a key service industry – road and bridge construction. Based on a large-scale Australian survey and descriptive statistics, the paper finds that there is little difference in innovation levels between different types of industry participants and that innovation is difficult to implement. The survey gathered responses from suppliers, consultants, contracts and clients and compared results across these four industry sectors. The absorptive capacity and relationship capacities of respondents were also investigated. One in five respondents had poor absorptive capacity. Suppliers were found to the most effective learners and were the best adopters of ideas from outside their organisations and consultants were the least effective. Australian construction organisations have relatively good relationship skills because relationship-based contracts are common compared to other countries. Indeed, the survey found that nearly 60% of respondents had experience with such contracts, with clients having more experience than the other three sectors. The results have implications for the measurement of innovation in project-based industries, and the relative roles of clients and suppliers in driving innovation in the construction industry. Further research will examine the extent to which particular governance mechanisms within relationship contracts lead to improved innovation and project performance.

Family representatives in family firms

Research Question/Issue: Family control in family firms can extend beyond the direct involvement of family members, but identifying these mechanisms is difficult in most markets. We utilize unique disclosures made by Taiwanese firms to examine the role played by family representatives in listed family firms. Family representatives are non-family members that represent the controlling family���s indirect shareholdings in the firm. We examine whether family representatives are used in the same manner as family members and whether they provide net benefits or costs to shareholders. Research Findings/Insights: In our sample of listed family firms, we find that omitting family representatives understates the influence of controlling families by 46 percent. We show that family representatives are associated with net costs to shareholders, but to a lesser extent than family members. We also find that controlling families use family members and family representatives differently. Family members are more involved in older family firms and in firms founded by the family. Family representatives are more involved in acquired and second generation family firms and in larger firms with more fixed assets. Theoretical/Academic Implications: We apply agency theory to the use of family representatives and show that family representatives are being used by controlling families to extend their influence within their firms, increasing agency costs to minority shareholders. Practitioner/Policy Implications: For policymakers, our analysis shows that disclosure of family member and representative relationships within firms is important and value-relevant to investors. Furthermore, our results suggest that firm performance could be improved by limiting the involvement of family members and family representatives in family firms.

Posttraumatic growth in family members living with a relative diagnosed with schizophrenia

Family members living with a relative diagnosed with schizophrenia have reported challenges and traumatic stressors, as well as perceived benefits and personal growth. This study explored factors associated with posttraumatic growth (PTG) within such families. Personality, stress, coping, social support and PTG were assessed in 110 family members. Results revealed that a multiplicative mediational path model with social support and emotional or instrumental coping strategies as multi-mediators had a significant indirect effect on the relationship between extraversion and PTG. Clinically relevant concepts that map onto the multi-mediator model are discussed, translating these findings into clinical practice to facilitate naturally occurring PTG processes.

Domestic violence and family law : recognition and appropriation

The battered women’s movement in the United States contributed to a sweeping change in the recognition of men’s violence against female intimate partners. Naming the problem and arguing in favour of its identification as a serious problem meriting a collective response were key aspects of this effort. Criminal and civil laws have been written and revised in an effort to answer calls to take such violence seriously. Scholars have devoted significant attention to the consequences of this reframing of violence, especially around the unintended outcomes of the incorporation of domestic violence into criminal justice regimes. Family law, however, has remained largely unexamined by criminologists. This paper calls for criminological attention to family law responses to domestic violence and provides directions for future research.