Bond strength of steel hollow sections using carbon fibre reinforced polymer composites

This research was a step forward in developing bond strength of CFRP strengthened steel hollow sections under tension loads. The studies have revealed the ultimate load carrying capacity of the CFRP strengthened steel hollow sections and the stress distribution for different orientations of the CFRP sheet at different layers. This thesis presents a series of experimental and finite element analysis to determine a good understanding of the bond characteristics of CFRP strengthened steel hollow sections.

A novel multiplex PCR-RFLP method for simultaneous detection of the MTHFR 677 C > T, eNOS +894 G > T and - eNOS -786 T > C variants among Malaysian Malays

Background Hyperhomocysteinemia as a consequence of the MTHFR 677 C > T variant is associated with cardiovascular disease and stroke. Another factor that can potentially contribute to these disorders is a depleted nitric oxide level, which can be due to the presence of eNOS +894 G > T and eNOS −786 T > C variants that make an individual more susceptible to endothelial dysfunction. A number of genotyping methods have been developed to investigate these variants. However, simultaneous detection methods using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis are still lacking. In this study, a novel multiplex PCR-RFLP method for the simultaneous detection of MTHFR 677 C > T and eNOS +894 G > T and eNOS −786 T > C variants was developed. A total of 114 healthy Malay subjects were recruited. The MTHFR 677 C > T and eNOS +894 G > T and eNOS −786 T > C variants were genotyped using the novel multiplex PCR-RFLP and confirmed by DNA sequencing as well as snpBLAST. Allele frequencies of MTHFR 677 C > T and eNOS +894 G > T and eNOS −786 T > C were calculated using the Hardy Weinberg equation. Methods The 114 healthy volunteers were recruited for this study, and their DNA was extracted. Primer pair was designed using Primer 3 Software version 0.4.0 and validated against the BLAST database. The primer specificity, functionality and annealing temperature were tested using uniplex PCR methods that were later combined into a single multiplex PCR. Restriction Fragment Length Polymorphism (RFLP) was performed in three separate tubes followed by agarose gel electrophoresis. PCR product residual was purified and sent for DNA sequencing. Results The allele frequencies for MTHFR 677 C > T were 0.89 (C allele) and 0.11 (T allele); for eNOS +894 G > T, the allele frequencies were 0.58 (G allele) and 0.43 (T allele); and for eNOS −786 T > C, the allele frequencies were 0.87 (T allele) and 0.13 (C allele). Conclusions Our PCR-RFLP method is a simple, cost-effective and time-saving method. It can be used to successfully genotype subjects for the MTHFR 677 C > T and eNOS +894 G > T and eNOS −786 T > C variants simultaneously with 100% concordance from DNA sequencing data. This method can be routinely used for rapid investigation of the MTHFR 677 C > T and eNOS +894 G > T and eNOS −786 T > C variants.

Investigation of the 1758G>C and 2880A>G variants within the NCOA3 gene in a breast cancer affected Australian population

NCOA3 is a known low to moderate-risk breast cancer susceptibility gene, amplified in 5–10% and over expressed in about 60% of breast tumours. Additionally, this over expression is associated with Tamoxifen resistance and poor prognosis. Previously, two variants of NCOA3, 1758G > C and 2880A > G have been associated with breast cancer in two independent populations. Here we assessed the influence of the two NCOA3 variants on breast cancer risk by genotyping an Australian case–control study population. 172 cases and 178 controls were successfully genotyped for the 1758G > C variant and 186 cases and 182 controls were successfully genotyped for the 2880A > G variant using high-resolution melt analysis (HRM). The genotypes of the 1758G > C variant were validated by sequencing. χ2 tests were performed to determine if significant differences exist in the genotype and allele frequencies between the cases and controls. χ2 analysis returned no statistically significant difference (p > 0.05) for genotype frequencies between cases and controls for 1758G > C (χ2 = 0.97, p = 0.6158) or 2880A > G (χ2 = 2.09, p = 0.3516). Similarly, no statistical difference was observed for allele frequencies for 1758G > C (χ2 = 0.07, p = 0.7867) or 2880A > G (χ2 = 0.04, p = 0.8365). Haplotype analysis of the two SNPs also showed no difference between the cases and the controls (p = 0.9585). Our findings in an Australian Caucasian population composed of breast cancer sufferers and an age matched control population did not support the findings of previous studies demonstrating that these markers play a significant role in breast cancer susceptibility. Here, no significant difference was detected between breast cancer patients and healthy matched controls by either the genotype or allele frequencies for the investigated variants (all p ≥ 0.05). While an association of the two variants and breast cancer was not detected in our case–control study population, exploring these variants in a larger population of the same kind may obtain results in concordance with previous studies. Given the importance of NCOA3 and its involvement in biological processes involved in breast cancer and the possible implications variants of the gene could have on the response to Tamoxifen therapy, NCOA3 remains a candidate for further investigations.

The concept of congruent patient-centred care for hepatitis C management

Patient-centred care has been touted as the cornerstone of an effective and efficient primary health care system. However, primary care by its nature is a fragmented system. The system co-evolves in response to needs rather than being planned. In recent years, Medicare Locals were formed in Australia with the intention to tap into this pragmatic nature of primary care and foster health services delivery which is responsive to community and individual patient needs i.e. ‘patient-centred care’. However, it remains to be seen what and how theoretical framework/s can inform this work. For this presentation we aim to illustrate with a case study how hepatitis C is currently managed in primary care and hypothesise what a congruent model of patient-centred care for hepatitis C management could look like.

Interferon-free therapy for hepatitis C, how prepared is Australia for biosimilars?

The Hepatitis C virus (HCV) affects some 150 million people worldwide. However, unlike hepatitis A and B there is no vaccination for HCV and approximately 75% of people exposed to HCV develop chronic hepatitis. In Australia, around 226,700 people live with chronic HCV infection costing the government approximately $252 million per year. Historically, the standard approved/licenced treatment for HCV is pegylated interferon with ribavirin. There are major drawbacks with interferon-based therapy including side effects, long duration of therapy, limited access and affordability. Our previous survey of an at-risk population reported HCV treatment coverage of only 5%. Since April 2013, a new class of interferon-free treatments for chronic HCV is subsidised under the Pharmaceutical Benefits Scheme: boceprevir and telaprevir - estimated to cost the Australian Government in excess of $220 million over five years. Other biologic interferon-free therapeutic agents are scheduled to enter the Australian market. Use of small molecule generic pharmaceuticals has been advocated as a means of public cost savings. However, with the new biologic agents, generics (biosimilars) may not be feasible or straightforward, due to long patent life; marketing exclusivity; and regulatory complexity for these newer products.

An investigation of the C77G and C772T variations within the human protein tyrosine phosphatase receptor type C gene for association with multiple sclerosis in an Australian population

Multiple sclerosis (MS) is a common cause of neurological disability in young adults. The disease generally manifests in early to middle adulthood and causes various neurological deficits. Autoreactive T lymphocytes and their associated antigens have long been presumed important features of MS pathogenesis. The Protein tyrosine phosphatase receptor type C gene (PTPRC) encodes the T-cell receptor CD45. Variations within PTPRC have been previously associated with diseases of autoimmune origin such as type 1 diabetes mellitus and Graves' disease. We set out to investigate two variants within the PTPRC gene, C77G and C772T in subjects with MS and matched healthy controls to determine whether significant differences exist in these markers in an Australian population. We employed high resolution melt analysis (HRM) and restriction length polymorphism (RFLP) techniques to determine genotypic and allelic frequencies. Our study found no significant difference between frequencies for PTPRC C77G by either genotype (Χ2 = 0.65, P = 0.72) or allele (Χ2 = 0.48, P = 0.49). Similarly, we did not find evidence to suggest an association between PTPRC C772T by genotype (Χ2 = 1.06, P = 0.59) or allele (Χ2 = 0.20, P = 0.66). Linkage disequilibrium (LD) analysis showed strong linkage disequilibrium between the two tested markers (D' = 0.9970, SD = 0.0385). This study reveals no evidence to suggest that these markers are associated with MS in the tested Australian Caucasian population. Although the PTPRC gene has a significant role in regulating CD4+ and CD8+ autoreactive T-cells, interferon-beta responsiveness, and potentially other important processes, our study does not support a role for the two tested variants of this gene in MS susceptibility in the Australian population.

A simple test method for profiled steel cladding systems under wind uplift

A new simple test method using small scale models has been developed for testing profiled steel cladding systems under wind uplift/suction forces. This simple method should replace the large scale test method using two-span claddings used at present. It can be used for roof or wall cladding systems fastened with screw fasteners at crests or valleys.

Lateral impact response and parametric studies of axially loaded square concrete filled steel tube columns

This paper presents a numerical study on the response of axially loaded slender square concrete filled steel tube (CFST) columns under low velocity lateral impact loading. A finite element analysis (FEA) model was developed using the explicit dynamic nonlinear finite element code LS -DYNA in which the strain rate effects of both steel and concrete, contact between steel tube and concrete and confinement effect provided by the steel tube for the concrete were considered. The model also benefited from a relatively recent feature of LS-DYNA for applying a pre-loading in the explicit solver. The developed numerical model was verified for its accuracy and adequacy by comparing the results with experimental results available in the literature. The verified model was then employed to conduct a parametric study to investigate the influence of axial load level, impact location, support conditions, and slenderness ratio on the response of the CFST columns. A good agreement between the numerical and experimental results was achieved. The model could reasonably predict the impact load-deflection history and deformed shape of the column at the end of the impact event. The results of the parametric study showed that whilst impact location, axial load level and slenderness ratio can have a significant effect on the peak impact force, residual lateral deflection and maximum lateral deflection, the influence of support fixity is minimal. With an increase of axial load to up to a certain level, the peak force increases; however, a further increase in the axial load causes a decrease in the peak force. Both residual lateral deflection and maximum lateral deflection increase as axial load level increases. Shifting the impact location towards the supports increases the peak force and reduces both residual and maximum lateral deflections. A rise in slenderness ratio decreases the peak force and increases the residual and maximum lateral deflections.

Development and evaluation of a program to improve clinician and patient communication during a telehealth consultation : C.R.I.S.P. Telehealth

Introduction: The delivery of health care in the 21st century will look like no other in the past. The fast paced technological advances that are being made will need to transition from the information age into clinical practice. The phenomenon of e-Health is the over-arching form of information technology and telehealth is one arm of that phenomenon. The uptake of telehealth both in Australia and overseas, has changed the face of health service delivery to many rural and remote communities for the better, removing what is known as the tyranny of distance. Many studies have evaluated the satisfaction and cost-benefit analysis of telehealth across the organisational aspects as well as the various adaptations of clinical pathways and this is the predominant focus of most studies published to date. However, whilst comments have been made by many researchers about the need to improve and attend to the communication and relationship building aspects of telehealth no studies have examined this further. The aim of this study was to identify the patient and clinician experiences, concerns, behaviours and perceptions of the telehealth interaction and develop a training tool to assist these clinicians to improve their interaction skills. Methods: A mixed methods design combining quantitative (survey analysis and data coding) and qualitative (interview analysis) approaches was adopted. This study utilised four phases to firstly qualitatively explore the needs of clients (patients) and clinicians within a telehealth consultation then designed, developed, piloted and quantitatively and qualitatively evaluated the telehealth communication training program. Qualitative data was collected and analysed during Phase 1 of this study to describe and define the missing 'communication and rapport building' aspects within telehealth. This data was then utilised to develop a self-paced communication training program that enhanced clinicians existing skills, which comprised of Phase 2 of this study to develop the interactive program. Phase 3 included evaluating the training program with 26 clinicians and results were recorded pre and post training, whilst phase 4 was the pilot for future recommendations of this training program using a patient group within a Queensland Health setting at two rural hospitals. Results: Comparisons of pre and post training data on 1) Effective communication styles, 2) Involvement in communication training package, 3) satisfaction pre and post training, and 4) health outcomes pre and post training indicated that there were differences between pre and post training in relation to effective communication style, increased satisfaction and no difference in health outcomes between pre and post training for this patient group. The post training results revealed over half of the participants (N= 17, 65%) were more responsive to non-verbal cues and were better able to reflect and respond to looks of anxiousness and confusion from a 'patient' within a telehealth consultation. It was also found that during post training evaluations, clinicians had enhanced their therapeutic communication with greater detail to their own body postures, eye contact and presentation. There was greater time spent looking at the 'patient' with an increase of 35 second intervals of direct eye contact and less time spent looking down at paperwork which decreased by 20 seconds. Overall 73% of the clinicians were satisfied with the training program and 61% strongly agreed that they recognised areas of their communication that needed improving during a telehealth consultation. For the patient group there was significant difference post training in rapport with a mean score from 42 (SD = 28, n = 27) to 48 (SD = 5.9, n = 24). For communication comfort of the patient group there was a significant difference between the pre and post training scores t(10) = 27.9, p = .002, which meant that overall the patients felt less inhibited whilst talking to the clinicians and more understood. Conclusion: The aim of this study was to explore the characteristics of good patient-clinician communication and unmet training needs for telehealth consultations. The study developed a training program that was specific for telehealth consultations and not dependent on a 'trainer' to deliver the content. In light of the existing literature this is a first of its kind and a valuable contribution to the research on this topic. It was found that the training program was effective in improving the clinician's communication style and increased the satisfaction of patient's within an e-health environment. This study has identified some historical myths that telehealth cannot be part of empathic patient centred care due to its technology tag.

Electrochemical detection of dopamine and cytochrome c at a nanostructured gold electrode

A nanostructured gold surface consisting of closely packed outwardly growing spikes is investigated for the electrochemical detection of dopamine and cytochrome c. A significant electrocatalytic effect for the electrooxidation of both dopamine and ascorbic acid at the nanostructured electrode was found due to the presence of surface active sites which allowed the detection of dopamine in the presence of excess ascorbic acid to be achieved by differential pulse voltammetry. By simple modification with a layer of Nafion, the enhanced electrocatalytic properties of the nanostructured surface was maintained while increasing the selectivity of dopamine detection in the presence of interfering species such as excess ascorbic and uric acids. Also, upon modification of the nanostructured surface with a monolayer of cysteine, the electrochemical response of immobilised cytochrome c in two distinct conformations was observed. This opens up the possibility of using such a nanostructured surface for the characterisation of other biomolecules and in bio-electroanalytical applications.

Behaviour and design of crest-fixed profiled steel roof claddings under wind uplift

Profiled steel roof claddings in Australia are commonly made of very thin high tensile steel and are crest-fixed with screw fasteners. At present the design of these claddings is entirely based on testing. In order to improve the understanding of the behaviour of these claddings under wind uplift, and thus the design methods, a detailed investigation consisting of a finite element analysis and laboratory experiments was carried out on two-span roofing assemblies of three common roofing profiles. It was found that the failure of the roof cladding system was due to a local failure (dimpling of crests/pull-through) at the fasteners. This paper presents the details of the investigation, the results and then proposes a design method based on the strength of the screwed connections, for which testing of small-scale roofing models and/or using a simple design formula is recommended.