Development of a composite line source emission model for traffic interrupted microenvironments and its application in particle number emissions at a bus station

A composite line source emission (CLSE) model was developed to specifically quantify exposure levels and describe the spatial variability of vehicle emissions in traffic interrupted microenvironments. This model took into account the complexity of vehicle movements in the queue, as well as different emission rates relevant to various driving conditions (cruise, decelerate, idle and accelerate), and it utilised multi-representative segments to capture the accurate emission distribution for real vehicle flow. Hence, this model was able to quickly quantify the time spent in each segment within the considered zone, as well as the composition and position of the requisite segments based on the vehicle fleet information, which not only helped to quantify the enhanced emissions at critical locations, but it also helped to define the emission source distribution of the disrupted steady flow for further dispersion modelling. The model then was applied to estimate particle number emissions at a bi-directional bus station used by diesel and compressed natural gas fuelled buses. It was found that the acceleration distance was of critical importance when estimating particle number emission, since the highest emissions occurred in sections where most of the buses were accelerating and no significant increases were observed at locations where they idled. It was also shown that emissions at the front end of the platform were 43 times greater than at the rear of the platform. Although the CLSE model is intended to be applied in traffic management and transport analysis systems for the evaluation of exposure, as well as the simulation of vehicle emissions in traffic interrupted microenvironments, the bus station model can also be used for the input of initial source definitions in future dispersion models.

Concept building

In this world of continuous change, there’s probably one certainty: more change lies ahead. Our students will encounter challenges and opportunities that we can’t even imagine. How do we prepare our students as future citizens for the challenges of the 21st century? One of the most influential public intellectuals of our time, Howard Gardner, suggests that in the future individuals will depend to a great extent on the capacity to synthesise large amounts of information. ‘They will need to be able to gather together information from disparate sources and put it together in ways that work for themselves and can be communicated to other persons’(Gardner 2008, p. xiii). One of the first steps in ‘putting things together’ so they ‘work’ in the mind is ‘to group objects and events together on the basis of some similarity between them’ (Lee & das Gupta 1995, p. 116). When we do this and give them a collective name, we are conceptualising. Apart from helping to save our sanity by simplifying the vast amounts of data we encounter every day, concepts help us to understand and gain meaning from what we experience. Concepts are essential for synthesising information and they also help us to communicate with others. Put simply, concepts serve as building blocks for knowledge, understanding and communication. This chapter addresses the importance of teaching and learning about concepts and conceptual development in studies of society and environment. It proceeds as follows: first, it considers how individuals use concepts, and, second, it explores the characteristics of concepts; the third section presents a discussion of approaches that might be adopted by teachers intending to help their students build concepts in the classroom.

Poly(D,L-lactide)/hydroxyapatite composite tissue engineering scaffolds prepared by stereolithography

Hydroxyapatite (HAP) is a major component of bone and has osteoconductive and -inductive properties. It has been successfully applied as a substrate in bone tissue engineering, either with or without a biodegradable polymer such as polycaprolactone or polylactide. Recently, we have developed a stereolithography resin based on poly(D,L-lactide) (PDLLA) and a non-reactive diluent, that allows for the preparation of tissue engineering scaffolds with designed architectures. In this work, designed porous composite structures of PDLLA and HAP are prepared by stereolithography.

Resorbable composite scaffolds for craniofacial bone tissue engineering

Aim: Bone loss associated with trauma, osteo-degenerative diseases and tumors has tremendous socioeconomic impact related to personal and occupation disability and health care costs. In the present climate of increasing life expectancy with an ensuing increase in bone-related injuries, orthopaedic surgery is undergoing a paradigm shift from bone-grafting to bone engineering, where a scaffold is implanted to provide adequate load bearing and enhance tissue regeneration. We aim to develop composite scaffolds for bone tissue engineering applications to replace the current gold standard of autografting. ---------- Methods: Medical grade polycaprolactone-tricalcium phosphate (mPCL/TCP) scaffolds (80/20 wt%) were custom made using fused deposition modelling to produce 1x1.5x2 cm sized implants for critical-sized pig cranial implantations, empty defects were used as a control. Autologous bone marrow stromal cells (BMSCs) were extracted and precultured for 2 weeks, dispersed within fibrin glue and injected during scaffold implantation. After 2 years, microcomputed tomography and histology were used to assess bone regenerative capabilities of cell versus cell-free scaffolds. ---------- Results: Extensive bone regeneration was evident throughout the entire scaffold. Clear osteocytes embedded within mineralised matrix and active osteoblasts present around scaffold struts were observed. Cell groups performed better than cell-free scaffolds. ---------- Conclusions: Bone regeneration within defects which cannot heal unassisted can be achieved using mPCL/TCP scaffolds. This is improved by the inclusion of autogenous BMSCs. Further work will include the inclusion of growth factors including BMP-2, VEGF and PDGF to provide multifunctional scaffolds, where the three-dimensional (3D) template itself acts as a biomimetic, programmable and multi-drug delivery device.

Resorbable composite scaffolds for bone tissue engineering

Bone loss associated with trauma osteo-degenerative diseases and tumors has tremendous socioeconomic impact related to personal and occupation disability and health care costs. Bone grafting is often critical to surgical therapies. Autogenous bone is presently the preferred grafting material; however, this holds several disadvantages such as donor site morbidity. In the present climate of increasing life expectancy with an ensuing increase in bone-related injuries, orthopaedic surgery is undergoing a paradigm shift from bone-grafting to bone engineering, where a scaffold is implanted to provide adequate load bearing and enhance tissue regeneration. Our group at Queensland University of Technology (QUT) have developed, characterised and tested polycaprolactone/ tricalcium phosphate (PCL/TCP) composite scaffolds for low load-bearing bone defects. These scaffolds are being further developed for application in higher load bearing sites. Our approach emphasizes the importance of the biomaterials’ structural design, the scaffold architecture and structural and nutritional requirements for cell culture. These first-generation scaffolds made from medical grade PCL (mPCL) have been studied for more than 5 years within a clinical setting 1. This paper describes the application of second-generation scaffolds in small and large animal bone defect models and the ensuing bone regeneration as shown by histology and µCT.

Seismic mitigation of building structural systems using passive dampers

This paper treats the seismic mitigation of medium rise frame-shear wall structures and building facade systems using passive damping devices. The frame shear wall structures have embedded viscoelastic and friction dampers in different configurations and placed in various locations in the structure. Influence of damper type, configuration and location are investigated. Results for tip deflections which provide an overall evaluation of the seismic response of the structure, are determined. Seismic mitigation of building facade systems in which visco-elastic dampers are fitted at the horizontal connections between the facades and the frame, instead of the traditional rigid connections, are also treated. Finite element techniques are used to model and analyse the two structural systems under different earthquake loadings, scaled to the same peak ground acceleration for meaningful comparison of responses. Results demonstrate the feasibility of these techniques for seismic mitigation.

Building an Australian user community for VIVO

The Australian National Data Service (ANDS) was established in 2008 and aims to: influence national policy in the area of data management in the Australian research community; inform best practice for the curation of data, and, transform the disparate collections of research data around Australia into a cohesive collection of research resources One high profile ANDS activity is to establish the population of Research Data Australia, a set of web pages describing data collections produced by or relevant to Australian researchers. It is designed to promote visibility of research data collections in search engines, in order to encourage their re-use. As part of activities associated with the Australian National Data Service, an increasing number of Australian Universities are choosing to implement VIVO, not as a platform to profile information about researchers, but as a 'metadata store' platform to profile information about institutional research data sets, both locally and as part of a national data commons. To date, the University of Melbourne, Griffith University, the Queensland University of Technology, and the University of Western Australia have all chosen to implement VIVO, with interest from other Universities growing.

Building a methodology for context-aware business processes: insights from an exploratory case study

This paper describes the findings derived from an exploratory case study into the business processes at a leading Australian insurance provider. The business processes are frequently subjected to changes and deviations due to contextual events such as weather, financial conditions and others. In this study, we examine how context impacts business processes and how resulting business process changes are enacted. From our analysis, we suggest a methodological framework to guide organisations in the complex challenge of linking changing contextual factors with internal process design.

Maintenance person or architect? The role of academic advertising research in building better understanding

This paper suggests that, while advertising has changed, advertising research has not. Indeed, questions asked of advertising research more than 20 years ago have still not been answered. The enormity of change in advertising compounded by the lack of response from researchers suggests the traditional academic advertising research model requires more than routine maintenance. It seeks an architect with vision to redesign an academic research model that is probably broken or badly outdated. Five areas of the academic research approach are identified as needing rethinking: (1) the advertising problem, (2) sample frame and subjects, (3) assumptions regarding consumer behaviour, (4) research methodologies and (5) findings. Suggestions are made for improvement. But perhaps the biggest challenge is academic leadership. This paper proposes the establishment of a blue-ribbon panel to report back on recommended changes or improvements.

Building bridges to participation : sociocultural case studies of AfL

Assessment for Learning(AfL) case studies in a North Queensland school highlight the significance of the teacher-student relationship in creating a supportive culture within which students can negotiate new learner identities. AfL practices are school based evaluative practices that occur within the regular flow of teaching and learning with the purpose of informing and improving student learning to enhance learner autonomy. The identity of an autonomous learner is socially negotiated through participation in the community of practice of the class. Underpinned by a sociocultural perspective this research shows how AfL is manifested in action in its complexity and how positive teacher-student interactions can build bridges for students to move towards full participation.

QoS-oriented resource allocation and scheduling of multiple composite Web services in a hybrid cloud using a random-key genetic algorithm

In cloud computing resource allocation and scheduling of multiple composite web services is an important challenge. This is especially so in a hybrid cloud where there may be some free resources available from private clouds but some fee-paying resources from public clouds. Meeting this challenge involves two classical computational problems. One is assigning resources to each of the tasks in the composite web service. The other is scheduling the allocated resources when each resource may be used by more than one task and may be needed at different points of time. In addition, we must consider Quality-of-Service issues, such as execution time and running costs. Existing approaches to resource allocation and scheduling in public clouds and grid computing are not applicable to this new problem. This paper presents a random-key genetic algorithm that solves new resource allocation and scheduling problem. Experimental results demonstrate the effectiveness and scalability of the algorithm.

Enhancing pathways for ACE learners : Building the capacity of Adult and Community Education (ACE) providers to offer non-accredited courses and VET modules with pathways into VET programs.

This report presents findings from a project that considered a) the current capacity of Adult and Community Education (ACE) providers to offer non-accredited courses and single modules of accredited learning that provide pathways into full scale accredited VET programs, and b) the factors that aid and inhibit this from occurring. Based on the findings, suggestions are made as to what needs to be done to extend this capacity and thereby to achieve the goals outlined in the 2008 Ministerial Declaration on Adult Community Education.

An intelligent building model of sustainable architecture in a mechanism of open systems evolution

This paper argues a model of open systems evolution based on evolutionary thermodynamics and complex system science, as a design paradigm for sustainable architecture. The mechanism of open system evolution is specified in mathematical simulations and theoretical discourses. According to the mechanism, the authors propose an intelligent building model of sustainable design by a holistic information system of the end-users, the building and nature. This information system is used to control the consumption of energy and material resources in building system at microscopic scale, to adapt the environmental performance of the building system to the natural environment at macroscopic scale, for an evolutionary emergence of sustainable performance of buildings.

Green building, green neighbourhoods : a sub-tropical urban design handbook for planners

The Subtropical Design Handbook for Planners is primarily intended to provide advice in developing planning schemes to achieve the South East Queensland Regional Plan’s vision. This calls for ‘development which is sustainable and well-designed, and where the subtropical character of the region is recognised and reinforced’.

Constructability implementation among Malaysian building contractors

The basic researches about constructability issue done in different countries demonstrate the potential power of this concept to affect the total goals of the construction projects which can lead to significant cost saving, time saving and better quality via considering the contractors’ construction experience in earlier construction project phases. The present research assesses the familiarity of Malaysian building contractors with constructability concept and activities; then it tests their general opinions on its implementation in different construction phases and projects. As the result, some descriptive studies are done on amount of contractors’ familiarity with this term among various kinds of contractors, projects and contracts which can illustrate constructability implementation level among Malaysian contractors. The results of this study show that Malaysian contractors are not all familiar enough with this term and there are still some barriers that prevent them from taking part in its activities completely. The differences in amount of familiarity with constructability matter and its terms of implementation are quite obvious among various types of participants.