What student attributes affect experience of PBL in Virtual Space?

Some Engineering Faculties are turning to the problem-based learning (PBL)paradigm to engender necessary skills and competence in their graduates. Since, at the same time, some Faculties are moving towards distance education, questions are being asked about the effectiveness of PBL for technical fields such as Engineering when delivered in virtual space. This paper outlines an investigation of how student attributes affect their learning experience in PBL courses offered in virtual space. A frequency distribution was superimposed on the outcome space of a phenomenographical study on a suitable PBL course to investigate the effect of different student attributes on the learning experience. It was discovered that the quality, quantity, and style of facilitator interaction had the greatest impact on the student learning experience. This highlights the need to establish consistent student interaction plans and to set, and ensure compliance with, minimum standards with respect to facilitation and student interactions.

Necessary skills and practices required for effective participation in high bandwidth design team activities

Technology is continually changing, and evolving, throughout the entire construction industry; and particularly in the design process. One of the principal manifestations of this is a move away from team working in a shared work space to team working in a virtual space, using increasingly sophisticated electronic media. Due to the significant operating differences when working in shared and virtual spaces adjustments to generic skills utilised by members is a necessity when moving between the two conditions. This paper reports an aspect of a CRC-CI research project based on research of ‘generic skills’ used by individuals and teams when engaging with high bandwidth information and communication technologies (ICT). It aligns with the project’s other two aspects of collaboration in virtual environments: ‘processes’ and ‘models’. The entire project focuses on the early stages of a project (i.e. design) in which models for the project are being developed and revised. The paper summarises the first stage of the research project which reviews literature to identify factors of virtual teaming which may affect team member skills. It concludes that design team participants require ‘appropriate skills’ to function efficiently and effectively, and that the introduction of high band-width technologies reinforces the need for skills mapping and measurement.

Curriculum mapping of the Spatial Science Program, QUT : what was the cartography journey?

There are currently a number of issues of great importance affecting universities and the way in which their programs are now offered. Many issues are largely being driven top-down and impact both at a university-wide and at an individual discipline level. This paper provides a brief history of cartography and digital mapping education at the Queensland University of Technology (QUT). It also provides an overview of what is curriculum mapping and presents some interesting findings from the program review process. Further, this review process has triggered discussion and action for the review, mapping and embedding of graduate attributes within the spatial science major program. Some form of practical based learning is expected in vocationally oriented degrees that lead to professional accreditation and are generally regarded as a good learning exposure. With the restructure of academic programs across the Faculty of Built Environment and Engineering in 2006, spatial science and surveying students now undertake a formal work integrated learning unit. There is little doubt that students acquire the skills of their discipline (mapping science, spatial) by being immersed in the industry culture- learning how to process information and solve real-world problems within context. The broad theme of where geo-spatial mapping skills are embedded in this broad-based tertiary education course are examined with some focused discussion on the learning objectives, outcomes and examples of some student learning experiences

The relationship between construction firm strategies and innovation outcomes

Survey results provide a preliminary assessment of the relative contribution of a range of tactical business strategies to innovation performance by firms in the Australian construction industry. Over 1,300 firms were surveyed in 2004, resulting in a response rate of 29%. Respondents were classified as high, medium or low innovators according to an innovation index based on the novelty and impact of their innovations and their adoption of listed technological and organizational advances. The relative significance of 23 business strategies concerning (1) employees, (2) marketing, (3) technology, (4) knowledge and (5) relationships was examined by determining the extent to which they distinguished high innovators from low innovators. The individual business strategies that most strongly distinguished high innovators were (1) ‘investing in R&D’, (2) ‘participating in partnering and alliances on projects’, (3) ‘ensuring project learnings are transferred into continuous business processes’, (4) ‘monitoring international best practice’, and (5) ‘recruiting new graduates’. Of the five types of strategies assessed, marketing strategies were the least significant in supporting innovation. The results provide practical guidance to managers in project-based industries wishing to improve their innovation performance.

Behaviour and design of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.

Designing the Future

While there have been improvements in Australian engineering education since the 1990s, there are still strong concerns that more progress needs to be made, particularly in the areas of developing graduate competencies and in outcomes-based curricula. This paper reports on the findings from a two-day ALTC-funded forum that sought to establish a shared understanding with the 3 stakeholders (students, academics and industry) about how to achieve a design-based engineering curriculum. This paper reports on the findings from the first day’s activities and reveals that there is a shared desire for design and project-based curricula that would encourage the development of the ‘three-dimensional’ graduate: one who has technical, personal and professional and systems-thinking/design-based competence.

Rethinking the notion of culture in the national history curriculum

Major global changes are placing new demands on the Australian education system. Recent statements by the Prime Minister, together with current education policy and national curriculum documents available in the public domain, look to education’s role in promoting economic prosperity and social cohesion. Collectively, they emphasise the need to equip young Australians with the knowledge, understandings and skills required to compete in the global economy and participate as engaged citizens in a culturally diverse world. However, the decision to prioritise discipline-based learning in the forthcoming Australian history curriculum without specifically encompassing culture as a referent, raises the following question. How will students acquire the cultural knowledge, understandings and skills necessary for this process? This paper addresses this question by situating the current push for a national history curriculum, with specific reference to the study of Indigenous history and the study of Asia in Australia.

“Just try harder and you will shine” : a Study of 20 lazy children

Attributions of laziness, reflected in teacher comments such as “just try harder and you will shine” may mask specific cognitive, learning, attentional or emotional problems that could explain low motivation in some children. This paper reports findings from an investigation of 20 children, aged 7 to 10 years, who were regarded as lazy by their parents and teachers. Questionnaire measures provided evidence of low levels of motivation and classroom engagement. Psychometric assessments revealed the presence of a range of difficulties including phonologically-based learning disabilities and significant problems with attention in 17 of the 20 children. The paper concludes that the special needs of an unknown number of children may be overlooked because they are simply presumed to be lazy.

Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures

In recent times, light gauge cold-formed steel sections have been used extensively as primary load bearing structural members in many applications in the building industry. Fire safety design of structures using such sections has therefore become more important. Deterioration of mechanical properties of yield stress and elasticity modulus is considered the most important factor affecting the performance of steel structures in fires. Hence there is a need to fully understand the mechanical properties of light gauge cold-formed steels at elevated temperatures. A research project based on experimental studies was therefore undertaken to investigate the deterioration of mechanical properties of light gauge cold-formed steels. Tensile coupon tests were undertaken to determine the mechanical properties of these steels made of both low and high strength steels and thicknesses of 0.60, 0.80 and 0.95 mm at temperatures ranging from 20 to 800ºC. Test results showed that the currently available reduction factors are unsafe to use in the fire safety design of cold-formed steel structures. Therefore new predictive equations were developed for the mechanical properties of yield strength and elasticity modulus at elevated temperatures. This paper presents the details of the experimental study, and the results including the developed equations. It also includes details of a stress-strain model for light gauge cold-formed steels at elevated temperatures.

Distortional buckling tests of cold-formed steel compression members at elevated temperatures

In recent times, light gauge cold-formed steel sections have been used extensively since they have a very high strength to weight ratio compared with thicker hot-rolled steel sections. However, they are susceptible to various buckling modes including a distortional mode and hence show complex behaviour under fire conditions. Therefore a research project based on detailed experimental studies was undertaken to investigate the distortional buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. More than 150 axial compression tests were undertaken at uniform ambient and elevated temperatures. Two types of cross sections were selected with nominal thicknesses of 0.60, 0.80, and 0.95 mm. Both low (G250) and high (G550) strength steels were used. Distortional buckling tests were conducted at six different temperatures in the range of 20 to 800°C. The ultimate loads of compression members subject to distortional buckling were then used to review the adequacy of the current design rules at ambient and elevated temperatures. This paper presents the details of this experimental study and the results.

Transforming Queensland VET : Challenges and Opportunities (Volume 1)

The volume is a collection of papers that address issues associated with change in the delivery of VET programs in Queensland, foreshadowed by the release of The Queensland Skill Plan in 2006. Issues that relate to the implementation of the Actions identified in the Queensland Skills Plan are the focus of the collection. In particular, the incorporation of Information Communication Technologies (ICTs) and e-learning approaches in the delivery of training packages is a key topic, how such change can be managed in the delivery of training programs, as well as broader professional development issues for VET practitioners. Change at an organisational level is the focus of two papers. Lyn Ambrose uses ideas from Diffusion of Innovations Theory to consider how the adoption eLearning in a TAFE community can be addressed. The paper by Susan Todhunter also discusses the organisational challenges in change initiatives in TAFE Institutes. Specific issues related to in the professional development of VET teachers are the focus of the papers by Mary Campbell, Sharon Altena, and Judy Gronold. Mary Campbell discusses the importance of building staff capabilities within the TAFE system and how this might be managed. Sharon Altena considers how professional development programs are currently delivered and how new approaches to professional development for TAFE teachers are needed to ensure changes can be sustained in teaching practice. The paper by Judy Gronold takes up a specific challenge for VET practitioners in the Queensland Skills Plan. She addresses issues related to embedding employability skills into training delivery in order to address industries’ need for flexible, multi-skilled productive workers. Mark Driver discusses the issues resulting from increased number of mature-aged learners in VET programs and how this change in the demographic profile of students presents challenges to the VET system. In the paper by David McKee, implications in the incorporation of ICTs into trade training are discussed and the need for effective change management strategies to ensure a smooth transition to new ways of delivering trade training. Finally, in the paper by David Roberts, the potential of Problem-Based Learning (PBL) approaches in VET training and the role of ICTs within such approaches are discussed. David uses horticulture training as an example to discuss the issues in implementing PBL effectively in VET programs. These papers were completed by the authors as a part of their postgraduate studies at QUT. The views reported are those of the authors and should not be attributed to the Queensland Department of Education, Training and the Arts.

Pedagogical learnings for management education : developing creativity and innovation

This paper argues that management education needs to consider a trend in learning design which advances creative learning through an alliance with art-based pedagogical processes. A shift is required from skills training to facilitating transformational learning through experiences that expand human potential, facilitated by artistic processes. This creative learning focus stems from a qualitative and quantitative analysis of an arts-based intervention for management development, called Management Jazz, conducted over three years at a large Australian University. The paper reviews some of the salient literature in the field, including an ‘Artful Learning Wave Trajectory’ Model. The Model considers four stages of the learning process: capacity, artful event, increased capability, and application/action to produce product. Methodology for the field-based research analysis of the intervention outcomes is presented. Three illustrative examples of arts-based learning are provided from the Management Jazz program. Finally, research findings indicate that artful learning opportunities enhance capacity for awareness of creativity in one’s self and in others, leading, through a transformative process, to enhanced leaders and managers. The authors conclude that arts-based management education can enhance creative capacity and develop managers and leaders for the 21st century business environment.

Making the most of MiLK : harnessing the contemporary culture and interests of natural born cyborg

MiLK is a mobile learning kit that allows students and teachers to author their own place-based learning events using simple web and mobile technologies. We will demonstrate how MiLK has been used by a number of teachers in various contexts to connect students, curriculum and everyday environments. This workshop will introduce participants to the various MiLK tools and processes; including mapping, designing, playing and reviewing events, group journals, discussion forums, student profiles, and class profiles. We will focus on the role of place as a potential resource for curriculum design and delivery. The MiLK Team are looking for enthusiastic mobile technology champions to join us. No previous experience or training in this area is needed. This workshop is designed to be relevant to all KLAs. During this session teachers will have an opportunity to experiment with simple tools to create dynamic resources for their own classrooms.

Lateral distortional buckling design rules for back to back LiteSteel beams

A new cold-formed steel beam, known as the LiteSteel Beam (LSB), has the potential to transform the low-rise building industry. The new beam is effectively a channel section with two rectangular hollow flanges and a slender web, and is manufactured using a simultaneous cold-forming and electric resistance welding process. Research into the flexural behaviour of single LSB members showed that the LSBs are susceptible to lateral distortional buckling effects and their moment capacities are significantly reduced for intermediate spans. Build-up LSB sections are expected to improve their flexural capacity and to enhance their applications. They are also likely to mitigate the detrimental effects of lateral distortional buckling observed with single LSB members of intermediate spans. However, the behaviour of build up beams is not well understood. Currently available design rules were found to be inadequate to predict the member moment capacities of back to back LSBs. Therefore a research project based on both experimental and numerical studies was undertaken to investigate the flexural behaviour of back to back LSBs with various longitudinal connection spacings under a uniform moment. New design rules were developed using the moment capacity data obtained using finite element analyses and experimental tests. This paper presents the details of the development of design rules for the back to back LSB sections.

Community engagement and artful academic staff development : a return on expectations through collaborative practice

The changing ownership of roles in organisational work-life leads this paper to examine what universities are doing in their academic development practice through research at an Australian university where ‘artful’ collaboration with the real world aims to build capability for innovative academic community engagement. The paper also presents findings on the ‘return on expectations’ (Hodges, 2004) of community engagement for both academics and their organisational supervisors.