Social network resilience following organisational change

This paper presents two key findings from a longitudinal study examining the dynamics of social networks during organisational change. One, the degree to which users seek new sources of information while adapting to the change. Two, the degree to which social networks display structural resilience when undergoing significant structural and technological change. Users reported an increase in advice ties post-implementation, however a proportionally higher increase in ties within their work group compared to the wider network was identified. The results also supported the supposition that while IT driven change may initially disrupt social networks some networks possess a high degree of resilience, with key players reasserting their original positions of influence following the initial phase of change related disruption.

Automated fit quantification of tibial nail designs during the insertion using computer three-dimensional modelling

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of the tibia. An optimal nail design should both facilitate insertion and anatomically fit the bone geometry at its final position in order to reduce the risk of stress fractures and malalignments. Due to the nonexistence of suitable commercial software, we developed a software tool for the automated fit assessment of nail designs. Furthermore, we demonstrated that an optimised nail, which fits better at the final position, is also easier to insert. Three-dimensional models of two nail designs and 20 tibiae were used. The fitting was quantified in terms of surface area, maximum distance, sum of surface areas and sum of maximum distances by which the nail was protruding into the cortex. The software was programmed to insert the nail into the bone model and to quantify the fit at defined increment levels. On average, the misfit during the insertion in terms of the four fitting parameters was smaller for the Expert Tibial Nail Proximal bend (476.3 mm2, 1.5 mm, 2029.8 mm2, 6.5 mm) than the Expert Tibial Nail (736.7 mm2, 2.2 mm, 2491.4 mm2, 8.0 mm). The differences were statistically significant (p ≤ 0.05). The software could be used by nail implant manufacturers for the purpose of implant design validation.

Is there a bone-nail specific entry point? automated fit quantification of tibial nail designs during the insertion for six different nail entry points

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of tibia. Selection of the correct nail insertion point is important for axial alignment of bone fragments and to avoid iatrogenic fractures. However, the standard entry point (SEP) may not always optimise the bone-nail fit due to geometric variations of bones. This study aimed to investigate the optimal entry for a given bone-nail pair using the fit quantification software tool previously developed by the authors. The misfit was quantified for 20 bones with two nail designs (ETN and ETN-Proximal Bend) related to the SEP and 5 entry points which were 5 mm and 10 mm away from the SEP. The SEP was the optimal entry point for 50% of the bones used. For the remaining bones, the optimal entry point was located 5 mm away from the SEP, which improved the overall fit by 40% on average. However, entry points 10 mm away from the SEP doubled the misfit. The optimised bone-nail fit can be achieved through the SEP and within the range of a 5 mm radius, except posteriorly. The study results suggest that the optimal entry point should be selected by considering the fit during insertion and not only at the final position.

A method for optimal fit of patient-specific fracture fixation plates

Anatomically pre-contoured fracture fixation plates are a treatment option for bone fractures. A well-fitting plate can be used as a tool for anatomical reduction of the fractured bone. However, recent studies showed that some plates fit poorly for many patients due to considerable shape variations between bones of the same anatomical site. Therefore, the plates have to be manually fitted and deformed by surgeons to fit each patient optimally. The process is time-intensive and labor-intensive, and could lead to adverse clinical implications such as wound infection or plate failure. This paper proposes a new iterative method to simulate the patient-specific deformation of an optimally fitting plate for pre-operative planning purposes. We further demonstrate the validation of the method through a case study. The proposed method involves the integration of four commercially available software tools, Matlab, Rapidform2006, SolidWorks, and ANSYS, each performing specific tasks to obtain a plate shape that fits optimally for an individual tibia and is mechanically safe. A typical challenge when crossing multiple platforms is to ensure correct data transfer. We present an example of the implementation of the proposed method to demonstrate successful data transfer between the four platforms and the feasibility of the method.

Participative behaviour of organisational leaders: The perspective of the Bhutanese corporate sector

Explored in this study are the participative behaviour of organisational leaders in the emerging for-profit sector in Bhutan. Leaders engage primarily in verbal participative behaviour with subordinates when making organisational decisions especially if they believe in the importance of the contribution of participation to organization effectiveness. Leaders who believe in high power distance however are less likely to engage in both verbal participative behaviour and consultative participative behaviour. The research contributes to our understanding of participative decision making by identifying dimensions of participative behavior in the context of emerging economies.

Rejected! The harmful effects of workgroup mistreatment and the moderating role of organisational norms

This program of research investigated the harmful effects of mistreatment by the workgroup, and the role of perceived rejection as a critical mediator linking mistreatment and outcomes. This research program had three primary purposes. First, the research aimed to examine the important role of workgroup mistreatment as an independent predictor of negative outcomes, over and above the influence of supervisor mistreatment. Second, the research aimed to examine the effect of perceived rejection as an explanatory variable linking workgroup mistreatment and outcomes. Finally, the moderating effect of organizational norms on the relationship between workgroup mistreatment and perceived rejection was examined. The relationships of interest were examined over four studies, using multiple methods of data collection, across part-time and full-time working samples. In Study 1 (Chapter 2), the independent role of workgroup mistreatment and the mediating role of perceived rejection were examined. One hundred and forty two part-time working participants took part in the study. The participants completed a questionnaire on workplace behaviors in their organizations. The results of hierarchical regression analyses revealed a strong harmful effect of workgroup mistreatment, independent of mistreatment by the supervisor. In addition, the results showed that perceived rejection fully mediated the relationship between workgroup mistreatment and depression and organizational based self esteem. The study highlighted that perceived rejection acts as a key underlying psychological mechanism involved in the effect of workgroup mistreatment. This study has been published in the Journal of Occupational Health Psychology. Study 2 and Study 3 were presented as one paper in Chapter 3. The aims of these two studies was to explore the effects of workgroup mistreatment on a wider range of individual and organizational level outcomes, and to provide further evidence of the mediating role of perceived rejection as observed in Study 1. The results from both studies demonstrated that workgroup mistreatment had a significant and independent role in predicting negative individual and organizational level outcomes, providing support for the findings of Study 1. In the first study, 189 participants received scenarios manipulating workgroup mistreatment and supervisor mistreatment. The results of hierarchical regression analyses revealed that workgroup mistreatment harmfully affected participants, over and above that of the supervisor. The results also demonstrated that perceived rejection mediated the positive relationships between workgroup mistreatment and depression and organizational deviance, and also the negative relationships between workgroup mistreatment and organizational based self esteem and organizational citizenship behaviors. The second study included an additional aim, to examine the moderating role of supportive organizational norms. Two hundred and twenty nine participants read scenarios that manipulated workgroup mistreatment, supervisor mistreatment and organizational norms. The results of hierarchical regression analyses revealed the significant harmful effects of workgroup mistreatment, over and above the influence of supervisor mistreatment. The results also revealed the mediating role of perceived rejection. The direct effect of positive organizational norms also emerged, consistent with previous research. In addition, the result revealed that employees who experienced supportive organizational norms were more likely to reconcile with their workgroup members after experiencing mistreatment compared to employees who experienced hostile organizational norms. Finally, an unexpected pattern on the key affective variables of depression and organizational based self esteem emerged, such that mistreatment led to more negative outcomes in the supportive norms condition than in the hostile condition, where employees appeared to be desensitized. This paper is currently under review at the Journal of Applied Social Psychology. In Study 4 (Chapter 4), the overall model of workplace mistreatment was tested on a sample of full-time workers in an applied setting. One hundred and seventy two adults took part in the study. Participants were required to evaluate their workplace regarding mistreatment and organizational norms and to report their own psychological, behavioral and organizational outcomes. The results revealed that workgroup mistreatment was associated with increased depression, stress and avoidance, over and above supervisor mistreatment. In addition, the results revealed that perceived rejection acted as an explanatory variable linking workgroup mistreatment to a number of outcomes. Furthermore, the moderating role of hostile organizational norms emerged on depression, stress, reconciliation and avoidance. This paper is currently under review at the Journal of Occupational Health Psychology. Overall, the four studies provided empirical support for the majority of the hypotheses. The effects were demonstrated for a range of psychological, behavioral, and organizational level outcomes, using multiple methods of data collection, across part-time and full-time workers. At the conclusion of the thesis (Chapter 5), an overall summary is provided of the findings across all four studies, practical and theoretical implications and research directions.

Achieving intention-centric BPM through automated planning

As a result of the more distributed nature of organisations and the inherently increasing complexity of their business processes, a significant effort is required for the specification and verification of those processes. The composition of the activities into a business process that accomplishes a specific organisational goal has primarily been a manual task. Automated planning is a branch of artificial intelligence (AI) in which activities are selected and organised by anticipating their expected outcomes with the aim of achieving some goal. As such, automated planning would seem to be a natural fit to the BPM domain to automate the specification of control flow. A number of attempts have been made to apply automated planning to the business process and service composition domain in different stages of the BPM lifecycle. However, a unified adoption of these techniques throughout the BPM lifecycle is missing. As such, we propose a new intention-centric BPM paradigm, which aims on minimising the specification effort by exploiting automated planning techniques to achieve a pre-stated goal. This paper provides a vision on the future possibilities of enhancing BPM using automated planning. A research agenda is presented, which provides an overview of the opportunities and challenges for the exploitation of automated planning in BPM.

Predicting emotional exhaustion among haemodialysis nurses

Background Understanding the organisational predictors of burnout (emotional exhaustion) in haemodialysis nurses is critical for staff retention and improving nurse and patient outcomes. Previous research has demonstrated high levels of emotional exhaustion among haemodialysis nurses; yet the relationships among nurses’ work environment, job satisfaction, stress and emotional exhaustion are poorly understood. Aim To test an explanatory model of the relationships among the nursing work environment, job satisfaction, job stress and emotional exhaustion for haemodialysis nurses, drawing on Kanter’s Structural Theory of Organisational Empowerment. Methods Using a cross-sectional design 417 haemodialysis nurses completed an online survey between October 2011 and April 2012 using validated instruments to measure the work environment, and levels of job satisfaction, job stress and emotional exhaustion. Results Overall, the explanatory model demonstrated adequate fit and we found partial support for the hypothesised relationships. Haemodialysis nurses’ work environment had a direct positive effect on job satisfaction, explaining 88% of the variance. Greater job satisfaction, in turn, predicted lower job stress, explaining 82% of the variance. Job satisfaction also had an indirect effect on emotional exhaustion by mitigating job stress. However, job satisfaction did not have a direct effect on emotional exhaustion. Conclusion The work environment of haemodialysis nurses is pivotal to the development of job satisfaction. Nurses’ job satisfaction also affects the levels of job stress and emotional exhaustion. Our findings suggest nurse managers can improve staff retention by creating empowering work environments that promote job satisfaction in haemodialysis nurses.

The organisational context of nursing care in stroke units: A case study approach

Background Internationally the stroke unit is recognised as the evidence-based model for patient management, although clarity about the effective components of stroke units is lacking. Whilst skilled nursing care has been proposed as one component, the theoretical and empirical basis for stroke nursing is limited. We attempted to explore the organisational context of stroke unit nursing, to determine those features that staff perceived to be important in facilitating high quality care. Design A case study approach was used, that included interviews with nurses and members of the multidisciplinary teams in two Canadian acute stroke units. A total of 20 interviews were completed, transcribed and analysed thematically using the Framework Approach. Trustworthiness was established through the review of themes and their interpretation by members of the stroke units. Findings Nine themes that comprised an organisational context that supported the delivery of high quality nursing care in acute stroke units were identified, and provide a framework for organisational development. The study highlighted the importance of an overarching service model to guide the organisation of care and the development of specialist and advanced nursing roles. Whilst multidisciplinary working appears to be a key component of stroke unit nursing, various organisational challenges to its successful implementation were highlighted. In particular the consequence of differences in the therapeutic approach of nurses and therapy staff needs to be explored in greater depth. Successful teamwork appears to depend on opportunities for the development of relationships between team members as much as the use of formal communication systems and structures. A co-ordinated approach to education and training, clinical leadership, a commitment to research, and opportunities for role and practice development also appear to be key organisational features of stroke unit nursing. Recommendations for the development of stroke nursing leadership and future research into teamwork in stroke settings are made.

The importance of group-fit in new director selection

Purpose Director selection is an important yet under-researched topic. The purpose of this paper is to contribute to extant literature by gaining a greater understanding into how and why new board members are recruited. Design/methodology/approach This exploratory study uses in-depth interviews with Australian non-executive directors to identify what selection criteria are deemed most important when selecting new director candidates and how selection practices vary between organisations. Findings The findings indicate that appointments to the board are based on two key attributes: first, the candidates’ ability to contribute complementary skills and second, the candidates’ ability to work well with the existing board. Despite commonality in these broad criteria, board selection approaches vary considerably between organisations. As a result, some boards do not adequately assess both criteria when appointing a new director hence increasing the chance of a mis-fit between the position and the appointed director. Research limitations/implications The study highlights the importance of both individual technical capabilities and social compatibility in director selections. The authors introduce a new perspective through which future research may consider director selection: fit. Originality/value The in-depth analysis of the director selection process highlights some less obvious and more nuanced issues surrounding directors’ appointment to the board. Recurrent patterns indicate the need for both technical and social considerations. Hence the study is a first step in synthesising the current literature and illustrates the need for a multi-theoretical approach in future director selection research.

A stress and coping approach to organisational change: Evidence from three field studies

In this paper, a stress and coping perspective is used to outline the processes that determine employee adaptation to organisational change. A theoretical framework that simultaneously considers the effects of event characteristics, situational appraisals, coping strategies, and coping resources is reviewed. Three empirical investigations of organisational change that have tested various components of the model are then presented. In the first study, there was evidence linking event characteristics, situational appraisals, coping strategies and coping resources to levels of employee adjustment in a sample of pilots employed in a newly merged airline company. In a more focused test of the model with a sample of employees experiencing a restructuring process in their organisation it was found that the provision of change-related information enhanced levels of efficacy to deal with the change process which, in turn, predicted psychological wellbeing, client engagement, and job satisfaction. In a study of managers affected by a new remuneration scheme, there was evidence to suggest that managers who received change-specific information and opportunities to participate in the change process reported higher levels of change readiness. Managers who reported higher levels of readiness for change also reported higher levels of psychological wellbeing and job satisfaction. These studies highlight ways in which managers and change agents can help employees to cope during times of organisational change.

Inter-organisational characteristics of resilience in a post-disaster recovery context

During post-disaster recovery, an infrastructure system may be subject to a number of disturbances originating from several other interdependent infrastructures. These disturbances might result in a series of system failures, thereby having immediate impact on societal living conditions. The inability to detect signs of disturbance from one infrastructure during recovery might cause significant disruptive effects on other infrastructure via the interconnection that exist among them. In such circumstances, it clearly appears that critical infrastructures' interdependencies affect the recovery of each individual infrastructure, as well as those of other interdependent infrastructure systems. This is why infrastructure resilience needs to be improved in function of those interdependencies, particularly during the recovery period to avoid the occurrence of a ‘disaster of disaster’ scenario. Viewed from this perspective, resilience is achieved through an inter-organisational collaboration between the different organisations involved in the reconstruction of interdependent infrastructure systems. This paper suggests that to some extent, the existing degree of interconnectedness between these infrastructure systems can also be found in their resilience ability during post-disaster recovery. For instance, without a resilient energy system, a large-scale power outage could affect simultaneously all the interdependent infrastructures after a disaster. Thus, breaking down the silos of resilience would be the first step in minimizing the risks of disaster failures from one infrastructure to cascade or escalate to other interconnected systems.

Mind the Gap!: Fundraisers and their nonprofit organisational leaders do think differently and this difference matters

Australian fundraisers and their organisational leaders (CEOs and board members) diverge sometimes in how they think about fundraising. In fact, eight key differences emerged in the recent Australian study that sparked this paper. A strong fundraising/leadership accord in attitudes toward fundraising would seem to be important, especially in tightened funding regimes. Both demand and competition for funding beyond the government dollar is growing. Many organisations are moving into community fundraising for the first time due to imperilled government funding. The sophistication of all donation sources is likewise on the rise. These factors add complexity to the fundraising role and to the task of boards and CEOs in managing fundraising strategy and activity. Some variances in professional outlook might be predictable between fundraisers and fundraising organisation leaders. However, the differences found in our study are in areas that potentially affect the organisation’s ability to fill its mission. It is advisable then to ‘mind the gap’ and also to explore it.

Automated fit assessment of intramedullary nail designs during insertion

Modern intramedullary nails, which are utilised for the treatment of bone fractures, need to be designed to fit the anatomy of the patient population. Traditional and recent semi-automated approaches for quantifying the anatomical fit between bones and nail designs suffer from various drawbacks. This thesis proposed an automated comprehensive nail design validation method. The developed software tool was utilised to quantify the anatomical fit of four commercial nail designs. Furthermore, the thesis demonstrated the existence of a bone-nail specific nail entry point. The developed method is of great benefit for the implant manufacturing industry as a nail design validation tool.