Exploring Chinese consumer's perceptions of using new mobile technology : A qualitative study

This study examines the case of Chinese consumer's intention to adopt the upcoming mobile technology, 3G. The qualitative study involved 45 in-depth intervie3ws undertaken in three major Chemise cities to explore what perceptions, beliefs and attitudes will influence their decisions about adopting 3G. Perceived beliefs about using 3G technology were found to be important determinants. Additionally, there was evidence of influences from their social network that could motivate the adoption behaviour, as well as influence from the secondary information sources, such as the media and the Internet. Finally, some constraints were identifies that may inhibit Chinese consumers' adoption of this technology.

Microstructural characterization of electron beam evaporated tungsten oxide films for gas sensing applications

Tungsten trioxide is one of the potential semiconducting materials used for sensing NH3, CO, CH4 and acetaldehyde gases. The current research aims at development, microstructural characterization and gas sensing properties of thin films of Tungsten trioxide (WO3). In this paper, we intend to present the microstructural characterization of these films as a function of post annealing heat treatment. Microstructural and elemental analysis of electron beam evaporated WO3 thin films and iron doped WO3 films (WO3:Fe) have been carried out using analytical techniques such as Transmission electron microscopy, Rutherford Backscattered Spectroscopy and XPS analysis. TEM analysis revealed that annealing at 300oC for 1 hour improves cyrstallinity of WO3 film. Both WO3 and WO3:Fe films had uniform thickness and the values corresponded to those measured during deposition. RBS results show a fairly high concentration of oxygen at the film surface as well as in the bulk for both films, which might be due to adsorption of oxygen from atmosphere or lattice oxygen vacancy inherent in WO3 structure. XPS results indicate that tungsten exists in 4d electronic state on the surface but at a depth of 10 nm, both 4d and 4f electronic states were observed. Atomic force microscopy reveals nanosize particles and porous structure of the film. This study shows e-beam evaporation technique produces nanoaparticles and porous WO3 films suitable for gas sensing applications and doping with iron decreases the porosity and particle size which can help improve the gas selectivity.

Conveying identity with mobile content

A series of mobile phone prototypes called The Swarm have been developed in response to the user needs identified in a three-year empirical study of young people’s use of mobile phones. The prototypes take cues from user led innovation and provide multiple avatars that allow individuals to define and manage their own virtual identity. This paper briefly maps the evolution of the prototypes and then describes how the pre-defined, color coded avatars in the latest version are being given greater context and personalization through the use of digital images. This not only gives ‘serendipity a nudge’ by allowing groups to come together more easily, it provides contextual information that can reduce gratuitous contact.

Computer vision onboard UAVs for civilian tasks

Computer vision is much more than a technique to sense and recover environmental information from an UAV. It should play a main role regarding UAVs’ functionality because of the big amount of information that can be extracted, its possible uses and applications, and its natural connection to human driven tasks, taking into account that vision is our main interface to world understanding. Our current research’s focus lays on the development of techniques that allow UAVs to maneuver in spaces using visual information as their main input source. This task involves the creation of techniques that allow an UAV to maneuver towards features of interest whenever a GPS signal is not reliable or sufficient, e.g. when signal dropouts occur (which usually happens in urban areas, when flying through terrestrial urban canyons or when operating on remote planetary bodies), or when tracking or inspecting visual targets—including moving ones—without knowing their exact UMT coordinates. This paper also investigates visual serving control techniques that use velocity and position of suitable image features to compute the references for flight control. This paper aims to give a global view of the main aspects related to the research field of computer vision for UAVs, clustered in four main active research lines: visual serving and control, stereo-based visual navigation, image processing algorithms for detection and tracking, and visual SLAM. Finally, the results of applying these techniques in several applications are presented and discussed: this study will encompass power line inspection, mobile target tracking, stereo distance estimation, mapping and positioning.

Integrity determination of RTK solutions in precision farming applications

Integrity of Real Time Kinematic (RTK) positioning solutions relates to the confidential level that can be placed in the information provided by the RTK system. It includes the ability of the RTK system to provide timely valid warnings to users when the system must not be used for the intended operation. For instance, in the controlled traffic farming (CTF) system that controls traffic separates wheel beds and root beds, RTK positioning error causes overlap and increases the amount of soil compaction. The RTK system’s integrity capacity can inform users when the actual positional errors of the RTK solutions have exceeded Horizontal Protection Levels (HPL) within a certain Time-To-Alert (TTA) at a given Integrity Risk (IR). The later is defined as the probability that the system claims its normal operational status while actually being in an abnormal status, e.g., the ambiguities being incorrectly fixed and positional errors having exceeded the HPL. The paper studies the required positioning performance (RPP) of GPS positioning system for PA applications such as a CTF system, according to literature review and survey conducted among a number of farming companies. The HPL and IR are derived from these RPP parameters. A RTK-specific rover autonomous integrity monitoring (RAIM) algorithm is developed to determine the system integrity according to real time outputs, such as residual square sum (RSS), HDOP values. A two-station baseline data set is analyzed to demonstrate the concept of RTK integrity and assess the RTK solution continuity, missed detection probability and false alarm probability.

From social butterfly to urban citizen workshop

Web applications such as blogs, wikis, video and photo sharing sites, and social networking systems have been termed ‘Web 2.0’ to highlight an arguably more open, collaborative, personalisable, and therefore more participatory internet experience than what had previously been possible. Giving rise to a culture of participation, an increasing number of these social applications are now available on mobile phones where they take advantage of device-specific features such as sensors, location and context awareness. This workshop made a contribution towards exploring and better understanding the opportunities and challenges provided by tools, interfaces, methods and practices of social and mobile technology that enable participation and engagement. It brought together a group of academics and practitioners from a diverse range of disciplines such as computing and engineering, social sciences, digital media and human-computer interaction to critically examine a range of applications of social and mobile technology, such as social networking, mobile interaction, wikis (eg., futuremelbourne.com.au), twitter, blogging, virtual worlds (eg, hub2.org), and their impact to foster community activism, civic engagement and cultural citizenship.

Effects of switching time on output voltages of a multilevel inverter used in high frequency applications

Employing multilevel inverters is a proper solution to reduce harmonic content of output voltage and electromagnetic interference in high power electronic applications. In this paper, a new pulse width modulation method for multilevel inverters is proposed in which power devices’ on-off switching times have been considered. This method can be surveyed in order to analyse the effect of switching time on harmonic contents of output voltage in high frequency applications when a switching time is not negligible compared to a switching cycle. Fast Fourier transform calculation and analysis of output voltage waveforms and harmonic contents with regard to switching time variation are presented in this paper for a single phase (3, 5)-level inverters used in high voltage and high frequency converters. Mathematical analysis and MATLAB simulation results have been carried out to validate the proposed method.

MiLK. Mobile Learning Kit

The Mobile Learning Kit is a new digital learning application that allows students and teachers to compose, publish, discuss and evaluate their own mobile learning games and events. The research field was interaction design in the context of mobile learning. The research methodology was primarily design-based supported by collaboration between participating disciplines of game design, education and information technology. As such, the resulting MiLK application is a synthesis of current pedagogical models and experimental interaction design techniques and technologies. MiLK is a dynamic learning resource for incorporating both formal and informal teaching and learning practices while exploiting mobile phones and contemporary digital social tools in innovative ways. MiLK explicitly addresses other predominant themes in educational scholarship that relate to current education innovation and reform such as personalised learning, life-long learning and new learning spaces. The success of this project is indicated through rigorous trials and actual uptake of MiLK by international participants in Australia, UK, US and South Africa. MiLK was awarded for excellence in the use of emerging technologies for improved learning and teaching as a finalist (top 3) in the Handheld Learning and Innovation Awards in the UK in 2008. MiLK was awarded funding from the Australasian CRC for Interaction Design in 2008 to prepare the MiLK application for development. MiLK has been awarded over $230,000 from ACID since 2006. The resulting application and research materials are now being commercialised by a new company, ‘ACID Services’.