Injection velocity control of thermoplastic injection molding via a double controller scheme

Injection velocity has been recognized as a key variable in thermoplastic injection molding. Its closed-loop control is, however, difficult due to the complexity of the process dynamic characteristics. The basic requirements of the control system include tracking of a pre-determined injection velocity curve defined in a profile, load rejection and robustness. It is difficult for a conventional control scheme to meet all these requirements. Injection velocity dynamics are first analyzed in this paper. Then a novel double-controller scheme is adopted for the injection velocity control. This scheme allows an independent design of set-point tracking and load rejection and has good system robustness. The implementation of the double-controller scheme for injection velocity control is discussed. Special techniques such as profile transformation and shifting are also introduced to improve the velocity responses. The proposed velocity control has been experimentally demonstrated to be effective for a wide range of processing conditions.

A model to estimate the durability performance of both normal and light-weight concrete

There has been an increasing focus on the development of test methods to evaluate the durability performance of concrete. This paper contributes to this focus by presenting a study that evaluates the effect of water accessible porosity and oven-dry unit weight on the resistance of both normal and light-weight concrete to chloride-ion penetration. Based on the experimental results and regression analyses, empirical models are established to correlate the total charge passed and the chloride migration coefficient with the basic properties of concrete such as water accessible porosity, oven dry unit weight, and compressive strength. These equations can be broadly applied to both normal and lightweight aggregate concretes. The model was also validated by an independent set of experimental results from two different concrete mixtures. The model provides a very good estimate on the concrete’s durability performance in respect to the resistance to chloride ion penetration.

The Thoughts Questionnaire (TQ) for family caregivers of people with dementia

Objectives: To develop a new measure of dysfunctional thoughts for family caregivers of people living with dementia. These thoughts can contribute to negative outcomes, but they may be modifiable. Method: A stepwise process was used to develop the Thoughts Questionnaire, commencing with item generation, concept mapping, and pilot testing in a sample of professional and nonprofessional caregivers of people with dementia (n = 18). Next, an independent sample of 35 family caregivers of people with dementia (30 female; M age = 64.30, standard deviation = 10.65) completed: (a) the Thoughts Questionnaire; (b) an existing measure of dysfunctional thoughts, the Dementia Thoughts Caregivers Questionnaire; and (c) separate validated measures of depressive symptoms, caregiver stress, and coping, respectively. Results: The level of agreement with dysfunctional thought statements from the Dementia Thoughts Caregivers Questionnaire and Thoughts Questionnaire was low. However, a small number of Thoughts Questionnaire statements were strongly endorsed by over 85% of the sample. Both dysfunctional thought measures had adequate reliability, but total scores were not significantly intercorrelated (r = .287, p = .095). Only the Thoughts Questionnaire was significantly, positively correlated with most caregiver stress measures. Thoughts Questionnaire items required a much lower reading level than the Dementia Thoughts Caregivers Questionnaire items. Discussion: This study provides preliminary data on a tool for assessing the negative role-related thoughts that family caregivers of people with dementia may experience. Given that these thoughts are implicated in depression but they may be modified, the capacity to identify dysfunctional thoughts may prove useful in caregiver support programs.

Predicting Australian adults' sun-safe behaviour : examining the role of personal and social norms

Objectives To address the scarcity of comprehensive, theory-based research in the Australian context, this study, using a theory of planned behaviour (TPB) framework, investigated the role of personal and social norms to identify the key predictors of adult Australians' sun-safe intentions and behaviour. Design The study used a prospective design with two waves of data collection, 1 week apart. Methods Participants were 816 adults (48.2% men) aged between 18 and 88 years recruited from urban, regional, and rural areas of Australia. At baseline, participants completed a questionnaire assessing the standard TPB predictors (attitude, subjective norm, and perceived behavioural control [PBC]), past behaviour, behavioural intention, and additional measures of group norm for the referent groups of friends and family, image norm, personal norm, personal choice/responsibility, and Australian identity. Seventy-one per cent of the participants (n = 577) reported on their sun-safe behaviour in the subsequent week. Results Via path modelling, past behaviour, attitude, group norm (friends), personal norm, and personal choice/responsibility emerged as independent predictors of intentions which, in turn, predicted sun-safe behaviour prospectively. Past behaviour, but not PBC, had direct effects on sun-safe behaviour. The model explained 61.6% and 43.9% of the variance in intention and behaviour, respectively. Conclusions This study provides support for the use of a comprehensive theoretical decision-making model to explain Australian adults' sun-safe intentions and behaviours and identifies viable targets for health-promoting messages in this high-risk context.

“Do I really need a nap?”: The role of sleep science in informing sleep practices in early childhood education and care settings

A compelling body of studies identifies the importance of sleep for children’s learning, behavioral regulation, and health. These studies have primarily focused on nighttime sleep or on total sleep duration. The independent contribution of daytime sleep, or napping, in childhood is an emerging research focus. Daytime sleep is particularly pertinent to the context of early childhood education and care (ECEC) where, internationally, allocation of time for naps is commonplace through to the time of school entry. The biological value of napping varies with neurological maturity and with individual circumstance. Beyond the age of 3 years, when monophasic sleep patterns become typical, there is an increasing disjuncture between children’s normative sleep requirements and ECEC practice. At this time, research evidence consistently identifies an association between napping and decreased quality and duration of night sleep. We assess the implications of this evidence for educational practice and health policy. We identify the need to distinguish the functions of napping from those of rest, and assert the need for evidence-based guidelines on sleep–rest practices in ECEC settings to accommodate individual variation in sleep needs. Given both the evidence on the impact of children’s nighttime sleep on long-term trajectories of health and well-being and the high rates of child attendance in ECEC programs, we conclude that policy and practice regarding naptime have significant implications for child welfare and ongoing public health.

The role of resilience and mTBI as predictors of postconcussional disorder symptomatology

Objective Resilience is 1 of several factors that are thought to contribute to outcome following mild traumatic brain injury (mTBI). This study explored the predictors of the postconcussional syndrome (PCS) symptoms that can occur following mTBI. We hypothesized that a reported recent mTBI and lower psychological resilience would predict worse reported PCS symptomatology. Method 233 participants completed the Neurobehavioral Symptom Inventory (NSI) and the Brief Resilience Scale (BRS). Three NSI scores were used to define PCS symptomatology. A total of 35 participants reported an mTBI (as operationally defined by the World Health Organization) that was sustained between 1 and 6 months prior to their participation (positive mTBI history); the remainder reported having never had an mTBI. Results Regression analyses revealed that a positive reported recent mTBI history and lower psychological resilience were significant independent predictors of reported PCS symptomatology. These results were found for the 3 PCS scores from the NSI, including using a stringent caseness criterion, p < .05. Demographic variables (age and gender) were not related to outcome, with the exception of education in some analyses. Conclusion The results demonstrate that: (a) both perceived psychological resilience and mTBI history play a role in whether or not PCS symptoms are experienced, even when demographic variables are considered, and; (b) of these 2 variables, lower perceived psychological resilience was the strongest predictor of PCS-like symptomatology.

Directional persistence and the optimality of run-and-tumble chemotaxis

E. coli does chemotaxis by performing a biased random walk composed of alternating periods of swimming (runs) and reorientations (tumbles). Tumbles are typically modelled as complete directional randomisations but it is known that in wild type E. coli, successive run directions are actually weakly correlated, with a mean directional difference of ∼63°. We recently presented a model of the evolution of chemotactic swimming strategies in bacteria which is able to quantitatively reproduce the emergence of this correlation. The agreement between model and experiments suggests that directional persistence may serve some function, a hypothesis supported by the results of an earlier model. Here we investigate the effect of persistence on chemotactic efficiency, using a spatial Monte Carlo model of bacterial swimming in a gradient, combined with simulations of natural selection based on chemotactic efficiency. A direct search of the parameter space reveals two attractant gradient regimes, (a) a low-gradient regime, in which efficiency is unaffected by directional persistence and (b) a high-gradient regime, in which persistence can improve chemotactic efficiency. The value of the persistence parameter that maximises this effect corresponds very closely with the value observed experimentally. This result is matched by independent simulations of the evolution of directional memory in a population of model bacteria, which also predict the emergence of persistence in high-gradient conditions. The relationship between optimality and persistence in different environments may reflect a universal property of random-walk foraging algorithms, which must strike a compromise between two competing aims: exploration and exploitation. We also present a new graphical way to generally illustrate the evolution of a particular trait in a population, in terms of variations in an evolvable parameter.

Evolution of sexual segregation in mammalian herbivores: kangaroos as marsupial models

Sexual segregation is best known in sexually dimorphic ungulates. Many hypotheses have been proposed to explain the evolution of sexual segregation in ungulates, but all are reducible to the influence of two factors: body size and sex-specific reproductive strategy. Definitive tests of these hypotheses are lacking in ungulates because these factors are confounded, all males being somewhat larger than females. Kangaroos represent a parallel radiation of terrestrial herbivores, but their populations are composed of a spectrum of adult body sizes, ranging from small males the same size as females to large males more than twice the size. We exploited this heteromorphism to assess the independent influences of size and sex in these ungulate analogues. We conducted a preliminary study of western grey kangaroos (Macropus fuliginosus) in north-western Victoria, Australia. Adult males predominately occupied grassland habitat, whereas females occurred mostly in lakebed, woodland and shrubland. Single-sex groups occurred more often than expected during the non-mating season. The diet of large males had the highest proportion of grass, and females had the least. These initial results indicate that both size and sex influence segregation in this species, confirming the worth of kangaroos as marsupial models for research into the evolution of sexual segregation.

Reawakening reflective capacity in the psychotherapy of schizophrenia : a case study

Disturbed sense of self has long been identified as a common experience among people suffering with schizophrenia. More recently, metacognitive deficits have been found to be a stable and independent feature of schizophrenia that contributes to disturbed self-experience and impedes recovery. Individual psychotherapy designed to target poor metacognition has been shown to promote a more coherent sense of self and enhanced recovery in people with schizophrenia. We provide a report of a 2-year individual psychotherapy with a patient suffering with chronic schizophrenia. Progress was assessed over the course of treatment using the Metacognition Assessment Scale and the Brief Psychiatric Rating Scale. The patient experienced improved metacognitive capacity and reduced symptom severity over the course of therapy. Implications for clinical practice are discussed.

Seeing it differently: physical education, teacher education and the possibilities of personal construct theory

The celebrated work of Lortie (1975) alerted teacher educators to the extended period of 'apprenticeship' that student teachers have been through before they arrive at teacher education programmes. The subjective implicit theories (Marland, 1992) developed by prospective teachers are shaped by their lifeworld experiences at school and in the case of physical education teachers, their experiences in sport. The biography of physical education teacher education (PETE) students tends to be characterised by ecto-mesomorphic individuals who have been socialised by the rigours of highly competitive sport (Gore, 1990; Macdonald, 1992; Rossi, 1996). We can add to this, the requirements of teacher preparation in physical education which for the most part are dominated by the traditions and rhetoric of the 'natural' bio-physical sciences; largely a legacy of Henry's (1964) work on physical education as an academic discipline, as well as that of Abernathy and Waltz the same year (Abernathy & Waltz, 1964). In the United Kingdom, Curl (1973) further advanced the argument in an attempt to justify human movement as an independent field of study with its own corpus of knowledge. It is little wonder then, that the dominant pedagogical discourse in physical education is, as Tinning (1991) discusses, one of performance pedagogy (see also Hendry, 1986 for an earlier discussion). The knowledge required to support such a discourse could be described as 'official' (Apple, 1993) and it assumes such status by virtue of the power appropriated by and bestowed upon the scientific community in PETE (Macdonald & Tinning, 1995; Sparkes, 1989, 1993). However, there are social reifiers too, and these tend to relate to the social construction of the body (Kirk, 1993; Kirk & Spiller, 1994; Gilroy, 1994) and what Tinning (1985) has termed the Cult of Slenderness. Furthermore the 'slender image' has become a signifier of 'good health'. This is inextricably linked to what might be considered as a health triplex—'exercise = fitness = health' (see Kirk & Colquhoun, 1989; Tinning & Kirk, 1991) which in Australia, underpins curriculum packages such as Daily Physical Education which teachers (often including physical education primary...

Aerothermal-strucutral analysis of a rocket launched Mach 8 scramjet experiment : ascent

This paper reports on the methodology and results of a weak-coupled aerothermalstructural analysis on the ascent phase of the SCRAMSPACE Mach 8 scramjet flight experiment. This vehicle was essentially un-shrouded during the flight trajectory, relying on the thin, 5mm thick aluminium external shell of the payload to maintain structural integrity and protect the flight experiment. As such, understanding the thermal-structural response of the vehicle was imperative to mission success. Using two- and three-dimensional models, an iterative procedure was employed to compute the flowfield, convective heating, wall temperatures and structural coupling at flight times covering both peak heating and peak surface temperature. Accounting for such coupling resulted in a 150K reduction in wall temperature compared to the more conservative cold wall assumption. Despite this, peak temperatures remained of the order of 550 K. Further, thermally induced stresses within these regions were in excess of four times the material failure limits. Irreversible material failure during ascent was therefore concluded likely to occur on the external shell. Two alternate materials, steel 1006 and copper, were therefore assessed with the results indicating that steel sections on the external shell resulted in the best thermal-structural response of the payload.

Mechanistic details of the membrane perforation and passive translocation of TAT peptides

The trans-activator of transcription (TAT) peptide is regarded as the “gold standard” for cell-penetrating peptides, capable of traversing a mammalian membrane passively into the cytosolic space. This characteristic has been exploited through conjugation of TAT for applications such as drug delivery. However, the process by which TAT achieves membrane penetration remains ambiguous and unresolved. Mechanistic details of TAT peptide action are revealed herein by using three complementary methods: quartz crystal microbalance with dissipation (QCM-D), scanning electrochemical microscopy (SECM) and atomic force microscopy (AFM). When combined, these three scales of measurement define that the membrane uptake of the TAT peptide is by trans-membrane insertion using a “worm-hole” pore that leads to ion permeability across the membrane layer. AFM data provided nanometre-scale visualisation of TAT punctuation using a mammalian-mimetic membrane bilayer. The TAT peptide does not show the same specificity towards a bacterial mimetic membrane and QCM-D and SECM showed that the TAT peptide demonstrates a disruptive action towards these membranes. This investigation supports the energy-independent uptake of the cationic TAT peptide and provides empirical data that clarify the mechanism by which the TAT peptide achieves its membrane activity. The novel use of these three biophysical techniques provides valuable insight into the mechanism for TAT peptide translocation, which is essential for improvements in the cellular delivery of TAT-conjugated cargoes including therapeutic agents required to target specific intracellular locations.

Marginal costs of hospital-acquired conditions : information for priority-setting for patient safety programmes and research

Objective: To estimate the relative inpatient costs of hospital-acquired conditions. Methods: Patient level costs were estimated using computerized costing systems that log individual utilization of inpatient services and apply sophisticated cost estimates from the hospital's general ledger. Occurrence of hospital-acquired conditions was identified using an Australian ‘condition-onset' flag for diagnoses not present on admission. These were grouped to yield a comprehensive set of 144 categories of hospital-acquired conditions to summarize data coded with ICD-10. Standard linear regression techniques were used to identify the independent contribution of hospital-acquired conditions to costs, taking into account the case-mix of a sample of acute inpatients (n = 1,699,997) treated in Australian public hospitals in Victoria (2005/06) and Queensland (2006/07). Results: The most costly types of complications were post-procedure endocrine/metabolic disorders, adding AU$21,827 to the cost of an episode, followed by MRSA (AU$19,881) and enterocolitis due to Clostridium difficile (AU$19,743). Aggregate costs to the system, however, were highest for septicaemia (AU$41.4 million), complications of cardiac and vascular implants other than septicaemia (AU$28.7 million), acute lower respiratory infections, including influenza and pneumonia (AU$27.8 million) and UTI (AU$24.7 million). Hospital-acquired complications are estimated to add 17.3% to treatment costs in this sample. Conclusions: Patient safety efforts frequently focus on dramatic but rare complications with very serious patient harm. Previous studies of the costs of adverse events have provided information on ‘indicators’ of safety problems rather than the full range of hospital-acquired conditions. Adding a cost dimension to priority-setting could result in changes to the focus of patient safety programmes and research. Financial information should be combined with information on patient outcomes to allow for cost-utility evaluation of future interventions.

Numerical algorithms for time-fractional subdiffusion equation with second-order accuracy

This article aims to fill in the gap of the second-order accurate schemes for the time-fractional subdiffusion equation with unconditional stability. Two fully discrete schemes are first proposed for the time-fractional subdiffusion equation with space discretized by finite element and time discretized by the fractional linear multistep methods. These two methods are unconditionally stable with maximum global convergence order of $O(\tau+h^{r+1})$ in the $L^2$ norm, where $\tau$ and $h$ are the step sizes in time and space, respectively, and $r$ is the degree of the piecewise polynomial space. The average convergence rates for the two methods in time are also investigated, which shows that the average convergence rates of the two methods are $O(\tau^{1.5}+h^{r+1})$. Furthermore, two improved algorithms are constrcted, they are also unconditionally stable and convergent of order $O(\tau^2+h^{r+1})$. Numerical examples are provided to verify the theoretical analysis. The comparisons between the present algorithms and the existing ones are included, which show that our numerical algorithms exhibit better performances than the known ones.

Modular design of profluorescent polymer sensors

A simple modular strategy for the synthesis of profluorescent nitroxide containing polymers is described. The incorporation of an epoxide as a pendant functionality on a polymer backbone synthesized using ATRP and subsequent nucleophilic ring-opening with sodium azide gave hydroxyl and azide functionality within a 3-bond radius. Orthogonal coupling chemistry then allowed the independent attachment of fluorophore and nitroxide groups in close proximity, giving rise to a profluorescent polymer. Validation of the viability of these materials as fluorescent sensors is demonstrated through efficient fluorescence switch-on observed when the materials are exposed to a model reductant or carbon-centred radical source.