A variant in LIN28B is associated with 2D:4D finger-length ratio, a putative retrospective biomarker of prenatal testosterone exposure

The ratio of the lengths of an individual's second to fourth digit (2D:4D) is commonly used as a noninvasive retrospective biomarker for prenatal androgen exposure. In order to identify the genetic determinants of 2D:4D, we applied a genome-wide association approach to 1507 11-year-old children from the Avon Longitudinal Study of Parents and Children (ALSPAC) in whom 2D:4D ratio had been measured, as well as a sample of 1382 12- to 16-year-olds from the Brisbane Adolescent Twin Study. A meta-analysis of the two scans identified a single variant in the LIN28B gene that was strongly associated with 2D:4D (rs314277: p = 4.1 x 10(-8)) and was subsequently independently replicated in an additional 3659 children from the ALSPAC cohort (p = 1.53 x 10(-6)). The minor allele of the rs314277 variant has previously been linked to increased height and delayed age at menarche, but in our study it was associated with increased 2D:4D in the direction opposite to that of previous reports on the correlation between 2D:4D and age at menarche. Our findings call into question the validity of 2D:4D as a simplistic retrospective biomarker for prenatal testosterone exposure.

A comparison of DNA pools constructed following whole genome amplification for two-stage SNP genotyping designs

Genotyping in DNA pools reduces the cost and the time required to complete large genotyping projects. The aim of the present study was to evaluate pooling as part of a strategy for fine mapping in regions of significant linkage. Thirty-nine single nucleotide polymorphisms (SNPs) were analyzed in two genomic DNA pools of 384 individuals each and results compared with data after typing all individuals used in the pools. There were no significant differences using data from either 2 or 8 heterozygous individuals to correct frequency estimates for unequal allelic amplification. After correction, the mean difference between estimates from the genomic pool and individual allele frequencies was .033. A major limitation of the use of DNA pools is the time and effort required to carefully adjust the concentration of each individual DNA sample before mixing aliquots. Pools were also constructed by combining DNA after Multiple Displacement Amplification (MDA). The MDA pools gave similar results to pools constructed after careful DNA quantitation (mean difference from individual genotyping .040) and MDA provides a rapid method to generate pools suitable for some applications. Pools provide a rapid and cost-effective screen to eliminate SNPs that are not polymorphic in a test population and can detect minor allele frequencies as low as 1% in the pooled samples. With current levels of accuracy, pooling is best suited to an initial screen in the SNP validation process that can provide high-throughput comparisons between cases and controls to prioritize SNPs for subsequent individual genotyping.

Individual process management: A first step towards the conceptualization of individual activities

Understanding activities of individuals is of major importance because their actions are the main foundation of economic activity. However, there is a lack of understanding with regard to how individual activities are characterised. Thus, we develop a first conceptual classification for individual activities extending the view on business processes. The classification scheme contains personal care, education, professional work, domestic work, leisure and travel as primary activities and individual organization, procurement, information gathering and self-expression as secondary activities. We extend mainly prior literature on customer management by structuring processes of individuals independently from their status as customer. This enables new theoretical insights in the way companies can design their offers from a strategic point of view. Companies can use IPM to systematically analyze individual processes independent from specific products and services which is assumed to foster the development of innovative product and service offers.

Individual difference predictors of change in career adaptability over time

Career adaptability is a psychosocial construct that reflects individuals' resources for managing career tasks and challenges. This study investigated the effects of demographic characteristics and three sets of individual difference variables (Big Five personality traits, core self-evaluations, and temporal focus) on changes over time in career adaptability and its dimensions (concern, control, curiosity, and confidence). Data came from 659 full-time employees in Australia who participated in two measurement waves six months apart. Results showed that age and future temporal focus predicted change in overall career adaptability. In addition, age, education, extraversion, neuroticism, openness to experience, core self-evaluations, and future temporal focus differentially predicted change over time in one or more of the four career adaptability dimensions. While the lagged effects found in this study were generally small, the findings suggest that certain individual difference characteristics predispose employees to experience change in career adaptability over time.

Lernen im Team: Zusammenhänge zwischen Personen- und Teammerkmalen und der Leistung von Multiplikatoren [Learning in teams: Relationships between individual and team characteristics and the performance of multipliers]

The continuous mutual transfer of knowledge and skills within work teams is increasingly important for organizational practice. According to the situational and experience-based approaches of applied learning research, certain individual and social prerequisites have to be met for successful learning in teams. In a field study at an automobile production site, it was investigated which personal characteristics of multipliers and which characteristics of teams are related to the performance of multipliers in 31 teams with 291 coworkers. Using multi-level analyses (HLM), the amount of variance explained by the predictor variables in teaching success of multipliers and learning success of coworkers was examined. Results showed that multipliers' conscientiousness and team cohesion were related to teaching success of multipliers; extraversion and team cohesion were related to the learning success of coworkers. In closing, the scientific and practical implications for the investigation and promotion of work-based learning processes in teams are discussed.

Within-person relationships between daily individual and job characteristics and daily manifestations of career adaptability

Previous research showed that daily manifestations of career adaptability fluctuate within individuals over short periods of time, and predict important daily job and career outcomes. Using a quantitative daily diary study design (N = 156 employees; 591 daily entries), the author investigated daily job characteristics (i.e., daily job demands, daily job autonomy, and daily supervisory career mentoring) and daily individual characteristics (i.e., daily Big Five personality characteristics, daily core self-evaluations, and daily temporal focus) as within-person predictors of daily career adaptability and its four dimensions (concern, control, curiosity, and confidence). Results showed that daily job demands, daily job autonomy, daily conscientiousness, daily openness to experience, as well as daily past and future temporal focus positively predicted daily career adaptability. Differential results emerged for the four career adaptability dimensions. Implications for future research on within-person variability in career adaptability are discussed.

Investigation of the effects of extracellular osmotic pressure on morphology and mechanical 1 properties of individual chondrocyte

It has been demonstrated that most cells of the body respond to osmotic pressure in a systematic manner. The disruption of the collagen network in the early stages of osteoarthritis causes an increase in water content of cartilage which leads to a reduction of pericellular osmolality in chondrocytes distributed within the extracellular environment. It is therefore arguable that an insight into the mechanical properties of chondrocytes under varying osmotic pressure would provide a better understanding of chondrocyte mechanotransduction and potentially contribute to knowledge on cartilage degeneration. In this present study, the chondrocyte cells were exposed to solutions with different osmolality. Changes in their dimensions and mechanical properties were measured over time. Atomic Force Microscopy (AFM) was used to apply load at various strain-rates and the force-time curves were logged. The thin-layer elastic model was used to extract the elastic stiffness of chondrocytes at different strain-rates and at different solution osmolality. In addition, the porohyperelastic (PHE) model was used to investigate the strain-rate dependent responses under the loading and osmotic pressure conditions. The results revealed that the hypo-osmotic external environment increased chondrocyte dimensions and reduced Young’s modulus of the cells at all strain-rates tested. In contrast, the hyper-osmotic external environment reduced dimensions and increased Young’s modulus. Moreover, by using the PHE model coupled with inverse FEA simulation, we established that the hydraulic permeability of chondrocytes increased with decreasing extracellular osmolality which is consistent with previous work in the literature. This could be due to a higher intracellular fluid volume fraction with lower osmolality.

Prediction of individual genetic risk to prostate cancer using a polygenic score

BACKGROUND Polygenic risk scores comprising established susceptibility variants have shown to be informative classifiers for several complex diseases including prostate cancer. For prostate cancer it is unknown if inclusion of genetic markers that have so far not been associated with prostate cancer risk at a genome-wide significant level will improve disease prediction. METHODS We built polygenic risk scores in a large training set comprising over 25,000 individuals. Initially 65 established prostate cancer susceptibility variants were selected. After LD pruning additional variants were prioritized based on their association with prostate cancer. Six-fold cross validation was performed to assess genetic risk scores and optimize the number of additional variants to be included. The final model was evaluated in an independent study population including 1,370 cases and 1,239 controls. RESULTS The polygenic risk score with 65 established susceptibility variants provided an area under the curve (AUC) of 0.67. Adding an additional 68 novel variants significantly increased the AUC to 0.68 (P = 0.0012) and the net reclassification index with 0.21 (P = 8.5E-08). All novel variants were located in genomic regions established as associated with prostate cancer risk. CONCLUSIONS Inclusion of additional genetic variants from established prostate cancer susceptibility regions improves disease prediction. Prostate 75:1467–1474, 2015. © 2015 Wiley Periodicals, Inc.

Flow during individual and co-operative gameplay

This study aims to further research in the field of video games by examining flow during individual and co-operative gameplay. Using a puzzle game called Droppit, we examined differences in flow based on two modes of play: single player vs. co-operative gameplay. Co-operative gameplay was found to induce greater flow in participants than single player gameplay. Additionally, co-operative gameplay participants had increased feelings of Challenge-Skill Balance, Unambiguous Feedback, Transformation of Time and Autotelic Experience. Our findings suggest that co-operative gameplay, involving puzzle-based problems, may result in increased flow during video game play.

IMIA working group on health record banking - How complex systems can cooperate towards having individual's consolidated data

This workshop aims at discussing alternative approaches to resolving the problem of health information fragmentation, partially resulting from difficulties of health complex systems to semantically interact at the information level. In principle, we challenge the current paradigm of keeping medical records where they were created and discuss an alternative approach in which an individual's health data can be maintained by new entities whose sole responsibility is the sustainability of individual-centric health records. In particular, we will discuss the unique characteristics of the European health information landscape. This workshop is also a business meeting of the IMIA Working Group on Health Record Banking.

A generic individual-based spatially explicit model as a novel tool for investigating insect-plant interactions: A case study of the behavioural ecology of frugivorous Tephritidae

Computational modelling of mechanisms underlying processes in the real world can be of great value in understanding complex biological behaviours. Uptake in general biology and ecology has been rapid. However, it often requires specific data sets that are overly costly in time and resources to collect. The aim of the current study was to test whether a generic behavioural ecology model constructed using published data could give realistic outputs for individual species. An individual-based model was developed using the Pattern-Oriented Modelling (POM) strategy and protocol, based on behavioural rules associated with insect movement choices. Frugivorous Tephritidae (fruit flies) were chosen because of economic significance in global agriculture and the multiple published data sets available for a range of species. The Queensland fruit fly (Qfly), Bactrocera tryoni, was identified as a suitable individual species for testing. Plant canopies with modified architecture were used to run predictive simulations. A field study was then conducted to validate our model predictions on how plant architecture affects fruit flies’ behaviours. Characteristics of plant architecture such as different shapes, e.g., closed-canopy and vase-shaped, affected fly movement patterns and time spent on host fruit. The number of visits to host fruit also differed between the edge and centre in closed-canopy plants. Compared to plant architecture, host fruit has less contribution to effects on flies’ movement patterns. The results from this model, combined with our field study and published empirical data suggest that placing fly traps in the upper canopy at the edge should work best. Such a modelling approach allows rapid testing of ideas about organismal interactions with environmental substrates in silico rather than in vivo, to generate new perspectives. Using published data provides a saving in time and resources. Adjustments for specific questions can be achieved by refinement of parameters based on targeted experiments.

Safety of Repair, Maintenance, Minor Alteration, and Addition (RMAA) Works: A New Focus of Construction Safety

"Safety of RMAA works is an almost uncharted topic of rising importance internationally. Small construction contractors are particularly dependant on RMAA work, especially during times of recession, and they undertake more risks on these jobs than large companies do. This book is based on unique international research and consultancy projects which detail, investigate, and suggest solutions to the specific challenges of safety in RMAA works, based on case studies. Starting with an overview of safety in the wider construction industries of developed countries, the first half of this book also provides a comprehensive summary of relevant rules, regulations, and the resulting safety performances. The systems in the UK, US and Hong Kong are described and contrasted, giving the reader an understanding of how different regulatory approaches have yielded a variety of results. From this solid introduction, specific problems observed in RMAA work are examined through case studies, with reference to the underlying cultural and demographic factors, and a variety of practical engineering and management solutions are explored. This important and practical international work is essential reading for postgraduate students of health and safety in construction, construction project management, or construction in developing countries, as well as policy-makers and construction project managers."--Publisher website