Australian nurses volunteering for the Sumatra-Andaman earthquake and tsunami of 2004 : a review of experience and analysis of data collected by the Tsunami Volunteer Hotline

This paper provides an outline of the work undertaken by nurses who participated in the relief effort as members of Australian medical teams during the Sumatra-Andaman earthquake and tsunami response. This profile is contrasted with the information provided by nurses who registered their interest in volunteering to help via the Australian Tsunami Hotline. The paper provides an overview of the skills and background of the nurses who provided information to the hotline and describes the range and extent of experience among this cohort of potential volunteers. This data is compared to nursing workforce data and internal rates of volunteering in Australia. The paper concludes that further research is necessary to examine the motivations of and disincentives for nurses to volunteer for overseas (disaster) work and, to develop an improved understanding within the discipline of the skills and experience required of volunteer responders. Further, it is argued that the development of standards for the collection of disaster health volunteer data would assist future responses and provide better tools for developing an improved understanding of disaster volunteering.

Rapid-response vaccines - does DNA offer a solution?

In responding to future influenza pandemics and other infectious agents, plasmid DNA overcomes many of the limitations of conventional vaccine production approaches.

Aerothermal-strucutral analysis of a rocket launched Mach 8 scramjet experiment : ascent

This paper reports on the methodology and results of a weak-coupled aerothermalstructural analysis on the ascent phase of the SCRAMSPACE Mach 8 scramjet flight experiment. This vehicle was essentially un-shrouded during the flight trajectory, relying on the thin, 5mm thick aluminium external shell of the payload to maintain structural integrity and protect the flight experiment. As such, understanding the thermal-structural response of the vehicle was imperative to mission success. Using two- and three-dimensional models, an iterative procedure was employed to compute the flowfield, convective heating, wall temperatures and structural coupling at flight times covering both peak heating and peak surface temperature. Accounting for such coupling resulted in a 150K reduction in wall temperature compared to the more conservative cold wall assumption. Despite this, peak temperatures remained of the order of 550 K. Further, thermally induced stresses within these regions were in excess of four times the material failure limits. Irreversible material failure during ascent was therefore concluded likely to occur on the external shell. Two alternate materials, steel 1006 and copper, were therefore assessed with the results indicating that steel sections on the external shell resulted in the best thermal-structural response of the payload.

Novel non-linear elastic structural analysis with generalised transverse element loads using a refined finite element

In the finite element modelling of structural frames, external loads such as wind loads, dead loads and imposed loads usually act along the elements rather than at the nodes only. Conventionally, when an element is subjected to these general transverse element loads, they are usually converted to nodal forces acting at the ends of the elements by either lumping or consistent load approaches. In addition, it is especially important for an element subjected to the first- and second-order elastic behaviour, to which the steel structure is critically prone to; in particular the thin-walled steel structures, when the stocky element section may be generally critical to the inelastic behaviour. In this sense, the accurate first- and second-order elastic displacement solutions of element load effect along an element is vitally crucial, but cannot be simulated using neither numerical nodal nor consistent load methods alone, as long as no equilibrium condition is enforced in the finite element formulation, which can inevitably impair the structural safety of the steel structure particularly. It can be therefore regarded as a unique element load method to account for the element load nonlinearly. If accurate displacement solution is targeted for simulating the first- and second-order elastic behaviour on an element on the basis of sophisticated non-linear element stiffness formulation, the numerous prescribed stiffness matrices must indispensably be used for the plethora of specific transverse element loading patterns encountered. In order to circumvent this shortcoming, the present paper proposes a numerical technique to include the transverse element loading in the non-linear stiffness formulation without numerous prescribed stiffness matrices, and which is able to predict structural responses involving the effect of first-order element loads as well as the second-order coupling effect between the transverse load and axial force in the element. This paper shows that the principle of superposition can be applied to derive the generalized stiffness formulation for element load effect, so that the form of the stiffness matrix remains unchanged with respect to the specific loading patterns, but with only the magnitude of the loading (element load coefficients) being needed to be adjusted in the stiffness formulation, and subsequently the non-linear effect on element loadings can be commensurate by updating the magnitude of element load coefficients through the non-linear solution procedures. In principle, the element loading distribution is converted into a single loading magnitude at mid-span in order to provide the initial perturbation for triggering the member bowing effect due to its transverse element loads. This approach in turn sacrifices the effect of element loading distribution except at mid-span. Therefore, it can be foreseen that the load-deflection behaviour may not be as accurate as those at mid-span, but its discrepancy is still trivial as proved. This novelty allows for a very useful generalised stiffness formulation for a single higher-order element with arbitrary transverse loading patterns to be formulated. Moreover, another significance of this paper is placed on shifting the nodal response (system analysis) to both nodal and element response (sophisticated element formulation). For the conventional finite element method, such as the cubic element, all accurate solutions can be only found at node. It means no accurate and reliable structural safety can be ensured within an element, and as a result, it hinders the engineering applications. The results of the paper are verified using analytical stability function studies, as well as with numerical results reported by independent researchers on several simple frames.

Testing times for the implementation of curriculum change: Analysis and extension of a curriculum change model

School curriculum change processes have traditionally been managed internally. However, in Queensland, Australia, as a response to the current high-stakes accountability regime, more and more principals are outsourcing this work to external change agents (ECAs). In 2009, one of the authors (a university lecturer and ECA) developed a curriculum change model (the Controlled Rapid Approach to Curriculum Change (CRACC)), specifically outlining the involvement of an ECA in the initiation phase of a school’s curriculum change process. The purpose of this paper is to extend the CRACC model by unpacking the implementation phase, drawing on data from a pilot study of a single school. Interview responses revealed that during the implementation phase, teachers wanted to be kept informed of the wider educational context; use data to constantly track students; relate pedagogical practices to testing practices; share information between departments and professional levels; and, own whole school performance. It is suggested that the findings would be transferable to other school settings and internal leadership of curriculum change. The paper also strikes a chord of concern – Do the responses from teachers operating in such an accountability regime live their professional lives within this corporate and globalised ideology whether they want to or not?

A nationwide web-based automated system for early outbreak detection and rapid response in China

Timely reporting, effective analyses and rapid distribution of surveillance data can assist in detecting the aberration of disease occurrence and further facilitate a timely response. In China, a new nationwide web-based automated system for outbreak detection and rapid response was developed in 2008. The China Infectious Disease Automated-alert and Response System (CIDARS) was developed by the Chinese Center for Disease Control and Prevention based on the surveillance data from the existing electronic National Notifiable Infectious Diseases Reporting Information System (NIDRIS) started in 2004. NIDRIS greatly improved the timeliness and completeness of data reporting with real time reporting information via the Internet. CIDARS further facilitates the data analysis, aberration detection, signal dissemination, signal response and information communication needed by public health departments across the country. In CIDARS, three aberration detection methods are used to detect the unusual occurrence of 28 notifiable infectious diseases at the county level and to transmit that information either in real-time or on a daily basis. The Internet, computers and mobile phones are used to accomplish rapid signal generation and dissemination, timely reporting and reviewing of the signal response results. CIDARS has been used nationwide since 2008; all Centers for Disease Control and Prevention (CDC) in China at the county, prefecture, provincial and national levels are involved in the system. It assists with early outbreak detection at the local level and prompts reporting of unusual disease occurrences or potential outbreaks to CDCs throughout the country.

In Response

We would like to thank Hsu and others for their sincere response 1 to our short review on geographical information systems (GIS) for dengue surveillance 2 ; they raised a number of important points that we would like to address...

Emergency pre-hospital disaster response training. What's the state of play?

Study/Objective This study examines the current state of disaster response education for Australian paramedics from a national and international perspective and identifies both potential gaps in content and challenges to the sustainability of knowledge acquired through occasional training. Background As demands for domestic and international disaster response increase, experience in the field has begun to challenge traditional assumptions that response to mass casualty events requires little specialist training. The need for a “streamlined process of safe medical team deployment into disaster regions”1 is generally accepted and, in Australia, the emergence of national humanitarian aid training has begun to respond to this gap. However, calls for a national framework for disaster health education2 haven’t received much traction. Methods A critical analysis of the peer reviewed and grey literature on the core components/competencies and training methods required to prepare Australian paramedics to contribute to effective health disaster response has been conducted. Research from the past 10 years has been examined along with federal and state policy with regard to paramedic disaster education. Results The literature shows that education and training for disaster response is variable and that an evidence based study specifically designed to outline sets of core competencies for Australian health care professionals has never been undertaken. While such competencies in disaster response have been developed for the American paradigm it is suggested that disaster response within the Australian context is somewhat different to that of the US, and therefore a gap in the current knowledge base exists. Conclusion Further research is needed to develop core competencies specific to Australian paramedics in order to standardise teaching in the area of health disaster management. Until this occurs the task of evaluating or creating disaster curricula that adequately prepares and maintains paramedics for an effective all hazards disaster response is seen as largely unattainable.

Microscale consolidation analysis of relaxation behavior of single living chondrocytes subjected to varying strain-rates

Besides the elastic stiffness, the relaxation behavior of single living cells is also of interest of various researchers when studying cell mechanics. It is hypothesized that the relaxation response of the cells is governed by both intrinsic viscoelasticity of the solid phase and fluid-solid interactions mechanisms. There are a number of mechanical models have been developed to investigate the relaxation behavior of single cells. However, there is lack of model enable to accurately capture both of the mechanisms. Therefore, in this study, the porohyperelastic (PHE) model, which is an extension of the consolidation theory, combined with inverse Finite Element Analysis (FEA) technique was used at the first time to investigate the relaxation response of living chondrocytes. This model was also utilized to study the dependence of relaxation behavior of the cells on strain-rates. The stress-relaxation experiments under the various strain-rates were conducted with the Atomic Force Microscopy (AFM). The results have demonstrated that the PHE model could effectively capture the stress-relaxation behavior of the living chondrocytes, especially at intermediate to high strain-rates. Although this model gave some errors at lower strain-rates, its performance was acceptable. Therefore, the PHE model is properly a promising model for single cell mechanics studies. Moreover, it has been found that the hydraulic permeability of living chondrocytes reduced with decreasing of strain-rates. It might be due to the intracellular fluid volume fraction and the fluid pore pressure gradients of chondrocytes were higher when higher strain-rates applied.

Pituitary volume and early treatment response in drug-naïve first-episode psychosis patients

BACKGROUND: An early response to antipsychotic treatment in patients with psychosis has been associated with a better course and outcome. However, factors that predict treatment response are not well understood. The onset of schizophrenia and related disorders has been associated with increased levels of stress and hyper-activation of the hypothalamic-pituitary-adrenal (HPA) axis. This study examined whether pituitary volume at the onset of psychosis may be a potential predictor of early treatment response in first-episode psychosis (FEP) patients. METHODS: We investigated the relationship between baseline pituitary volume and symptomatic treatment response over 12 weeks using mixed model analysis in a sample of 42 drug-naïve or early treated FEP patients who participated in a controlled dose-finding study of quetiapine fumarate. Logistic regression was used to examine predictors of treatment response. Pituitary volume was measured from magnetic resonance imaging scans that were obtained upon entry into the trial. RESULTS: Larger pituitary volume was associated with less improvement in overall psychotic symptoms (Brief Psychiatric Rating Scale (BPRS) P=0.031) and positive symptoms (BPRS positive symptom subscale P=0.010). Regardless of gender, patients with a pituitary volume at the 25th percentile (413 mm(3)) were approximately three times more likely to respond to treatment by week 12 than those at the 75th percentile (635 mm(3)) (odds ratio=3.07, CI: 0.90-10.48). CONCLUSION: The association of baseline pituitary volumes with early treatment response highlights the importance of the HPA axis in emerging psychosis. Potential implications for treatment strategies in early psychosis are discussed.

Effect of constitutive material models on seismic response of two-story reinforced concrete frame

This paper focuses on the finite element (FE) response sensitivity and reliability analyses considering smooth constitutive material models. A reinforced concrete frame is modeled for FE sensitivity analysis followed by direct differentiation method under both static and dynamic load cases. Later, the reliability analysis is performed to predict the seismic behavior of the frame. Displacement sensitivity discontinuities are observed along the pseudo-time axis using non-smooth concrete and reinforcing steel model under quasi-static loading. However, the smooth materials show continuity in response sensitivity at elastic to plastic transition points. The normalized sensitivity results are also used to measure the relative importance of the material parameters on the structural responses. In FE reliability analysis, the influence of smoothness behavior of reinforcing steel is carefully noticed. More efficient and reasonable reliability estimation can be achieved by using smooth material model compare with bilinear material constitutive model.

Response of laminated glass panels to near field blast events

This thesis develops and applies an analytical method to treat the blast response of glass façades and studies the influence of controlling parameters such as all component materials and geometric properties, support conditions and energy absorption, and hence establishes a framework for their design for a credible blast event.

A new method of detecting changes in corneal health in response to toxic insults

The size and arrangement of stromal collagen fibrils (CFs) influence the optical properties of the cornea and hence its function. The spatial arrangement of the collagen is still questionable in relation to the diameter of collagen fibril. In the present study, we introduce a new parameter, edge-fibrillar distance (EFD) to measure how two collagen fibrils are spaced with respect to their closest edges and their spatial distribution through normalized standard deviation of EFD (NSDEFD) accessed through the application of two commercially available multipurpose solutions (MPS): ReNu and Hippia. The corneal buttons were soaked separately in ReNu and Hippia MPS for five hours, fixed overnight in 2.5% glutaraldehyde containing cuprolinic blue and processed for transmission electron microscopy. The electron micrographs were processed using ImageJ user-coded plugin. Statistical analysis was performed to compare the image processed equivalent diameter (ED), inter-fibrillar distance (IFD), and EFD of the CFs of treated versus normal corneas. The ReNu-soaked cornea resulted in partly degenerated epithelium with loose hemidesmosomes and Bowman’s collagen. In contrast, the epithelium of the cornea soaked in Hippia was degenerated or lost but showed closely packed Bowman’s collagen. Soaking the corneas in both MPS caused a statistically significant decrease in the anterior collagen fibril, ED and a significant change in IFD, and EFD than those of the untreated corneas (p < 0.05, for all comparisons). The introduction of EFD measurement in the study directly provided a sense of gap between periphery of the collagen bundles, their spatial distribution; and in combination with ED, they showed how the corneal collagen bundles are spaced in relation to their diameters. The spatial distribution parameter NSDEFD indicated that ReNu treated cornea fibrils were uniformly distributed spatially, followed by normal and Hippia. The EFD measurement with relatively lower standard deviation and NSDEFD, a characteristic of uniform CFs distribution, can be an additional parameter used in evaluating collagen organization and accessing the effects of various treatments on corneal health and transparency.

Uncovering misconceptions through text analysis

Assessing students’ conceptual understanding of technical content is important for instructors as well as students to learn content and apply knowledge in various contexts. Concept inventories that identify possible misconceptions through validated multiple-choice questions are helpful in identifying a misconception that may exist, but do not provide a meaningful assessment of why they exist or the nature of the students’ understanding. We conducted a case study with undergraduate students in an electrical engineering course by testing a validated multiple-choice response concept inventory that we augmented with a component for students to provide written explanations for their multiple-choice selection. Results revealed that correctly chosen multiple-choice selections did not always match correct conceptual understanding for question testing a specific concept. The addition of a text-response to multiple-choice concept inventory questions provided an enhanced and meaningful assessment of students’ conceptual understanding and highlighted variables associated with current concept inventories or multiple choice questions.